Hi all,
So I'm far from a noob at at all of this (doing the custom android thing for years). But I'm not exactly constantly fiddling with my phone all the time anymore either. Basically I get a set-up that works for me, and I stick with it.
I've patiently been waiting to update to Lollipop. And today I did it. I did it by flashing the required factory images with fastboot.
AND IT WORKS. No problem. It boots. I go through the initial set-up. I can let it restore all my apps and passwords from the google servers, etc. So far so good.
My problem is that I cannot root. After I try, it bootloops (stuck at the Google splash, with my unlocked icon).
I tried to root before my first boot. I tried after the initial boot (before set-up and signing in). I tried rooting after setting it all up, and singing in, and letting google restore all of my apps. No matter which sequence I try, it will reboot a couple times at the first Google splash, and then fall back to Recovery.
(So, I'm on back on my rooted 4.4.4 nandroid, I think it's Mahdi Rom-- I forget)
Vital Stats:
Trying to install factory images of 5.0.1, all stock (system, boot (kernel), radio, bootloader)
Factory reset
(the above works fine)
TWRP 2.8.1.0
SuperSU-v2.40 (flashed via recovery)
Any ideas? Thanks for any help.
No, but could you try the previous version of SuperSU? Just to rule out the new version that I haven't tested please?
I updated to 5.0.1 earlier
Flashed all the img files exact userdata and then booted in to Android.
I then flashed TWRP 2.8.1.0 and used that to flash SuperSU 2.37
All that worked fine.. I then did a play update and SuperSU updated to 2.40
All working fine as far as I can tell. Apps needing root are working!
iowabeakster said:
Hi all,
So I'm far from a noob at at all of this (doing the custom android thing for years). But I'm not exactly constantly fiddling with my phone all the time anymore either. Basically I get a set-up that works for me, and I stick with it.
I've patiently been waiting to update to Lollipop. And today I did it. I did it by flashing the required factory images with fastboot.
AND IT WORKS. No problem. It boots. I go through the initial set-up. I can let it restore all my apps and passwords from the google servers, etc. So far so good.
My problem is that I cannot root. After I try, it bootloops (stuck at the Google splash, with my unlocked icon).
I tried to root before my first boot. I tried after the initial boot (before set-up and signing in). I tried rooting after setting it all up, and singing in, and letting google restore all of my apps. No matter which sequence I try, it will reboot a couple times at the first Google splash, and then fall back to Recovery.
(So, I'm on back on my rooted 4.4.4 nandroid, I think it's Mahdi Rom-- I forget)
Vital Stats:
Trying to install factory images of 5.0.1, all stock (system, boot (kernel), radio, bootloader)
Factory reset
(the above works fine)
TWRP 2.8.1.0
SuperSU-v2.40 (flashed via recovery)
Any ideas? Thanks for any help.
Click to expand...
Click to collapse
Try not doing that? When you go through the initial configuration, choose "Set up as a new device". Maybe the restore is somehow corrupting SuperSU?
BirchBarlow said:
Try not doing that? When you go through the initial configuration, choose "Set up as a new device". Maybe the restore is somehow corrupting SuperSU?
Click to expand...
Click to collapse
It happens even if I try to root before setting anything up at all.
albert_htc,
Are you saying: I should also flash the stock recovery first. Then boot for the first time. Then re-flash TWRP. Then flash SuperSU.
I never flashed the stock recovery. TWRP was on already on it.
Thanks guys. I'll give it another rip (doing stock recovery, then flashing back to TWRP) sometime soon.
iowabeakster said:
It happens even if I try to root before setting anything up at all.
albert_htc,
Are you saying: I should also flash the stock recovery first. Then boot for the first time. Then re-flash TWRP. Then flash SuperSU.
I never flashed the stock recovery. TWRP was on already on it.
Thanks guys. I'll give it another rip (doing stock recovery, then flashing back to TWRP) sometime soon.
Click to expand...
Click to collapse
Yes, flash the factory image using the batch file so every partition gets re-flashed. Now I'm thinking maybe your recovery is corrupt.
Run flash-all.bat and when your device reboots, go through all of the initial configuration and download all of the Gapps updates. Once that's all completed, go ahead and route using TWRP. If you find yourself still having the same problem, try live booting TWRP to flash SuperSU.
BirchBarlow said:
Yes, flash the factory image using the batch file so every partition gets re-flashed. Now I'm thinking maybe your recovery is corrupt.
Run flash-all.bat and when your device reboots, go through all of the initial configuration and download all of the Gapps updates. Once that's all completed, go ahead and route using TWRP. If you find yourself still having the same problem, try live booting TWRP to flash SuperSU.
Click to expand...
Click to collapse
I'm not going to flash over my user data, nandroids, app back-ups, etc. I'll stay with kit kat forever on my nexus 5 before I do that. Version numbers aren't that important. Hours wasted getting things set-up again are.
My recovery works fine. Both on kit kat and lollipop. My only problem is a boot loop when I flash SuperSU (via TWRP), on lollipop. I will try flashing stock recovery, though and then reflashing TWRP.
iowabeakster said:
I'm not going to flash over my user data, nandroids, app back-ups, etc. I'll stay with kit kat forever on my nexus 5 before I do that. Version numbers aren't that important. Hours wasted getting things set-up again are.
My recovery works fine. Both on kit kat and lollipop. My only problem is a boot loop when I flash SuperSU (via TWRP), on lollipop. I will try flashing stock recovery, though and then reflashing TWRP.
Click to expand...
Click to collapse
It's a tedious process, but it really isn't all that hard to back everything up to a computer, and you can do it easily with fastboot and a single command line.
Or what I'd recommend doing is just booting up, backing up all folders to a PC and then resetting and restoring later, backup apps with Titanium Backup (what I always do). A lot of us flashed factory images when Lollipop came out, so it isn't that bad once you start on the road.
Have you tried rooting from the bootloader via Chainfire's cf-auto root? I know I've read that sometimes rooting from recovery doesn't work properly, and that only certain zips will work. I've used the auto root each time (from stock fastboot flashing 5.0 & 5.0.1) with lollipop and it works fine. Link
Unzip and run batch file in bootloader. It will wipe everything if you haven't already unlocked bootloader (fastboot oem unlock). If you are already unlocked it won't wipe anything.
snappycg1996 said:
It's a tedious process, but it really isn't all that hard to back everything up to a computer, and you can do it easily with fastboot and a single command line.
Or what I'd recommend doing is just booting up, backing up all folders to a PC and then resetting and restoring later, backup apps with Titanium Backup (what I always do). A lot of us flashed factory images when Lollipop came out, so it isn't that bad once you start on the road.
Click to expand...
Click to collapse
I just backed the /sdcard, to my PC. I just re-ran titanium.
I can deal with "/sdcard issues" from updating to lollipop easy enough. That's a 30 second fix. I can deal with setting up my email accounts to my email client app. I can deal with launcher settings, and all the other apps, widgets, etc. Those are things that I can slowly get back to where I want. They aren't critical. But yeah, very tedious.
I think "starting over" may be much more tedious for me than most people though. I run ssh servers and clients on all PCs, servers, and phones (disabling passwords and using rsa encryption keys for security). It's very nice, once I get it all set up in that I can access everything (from anything) very easily. I do need root for that though also.
But if I can't just hit a "restore" to get it all my ssh addresses, keys, fingerprits, etc back to where it was and then I have to: reverify new fingerprints, generate new keys, re-enable passwords to transmit new keys for everything, then disable passwords (for all machines) ... well... I just get very very grumpy.
anactoraaron said:
Have you tried rooting from the bootloader via Chainfire's cf-auto root? I know I've read that sometimes rooting from recovery doesn't work properly, and that only certain zips will work. I've used the auto root each time (from stock fastboot flashing 5.0 & 5.0.1) with lollipop and it works fine. Link
Unzip and run batch file in bootloader. It will wipe everything if you haven't already unlocked bootloader (fastboot oem unlock). If you are already unlocked it won't wipe anything.
Click to expand...
Click to collapse
I'll check that out. Thanks.
Related
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Kleo2 said:
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Click to expand...
Click to collapse
If your phone is rooted or there is a CWM installed or there is any change in system files then ota will fail till you flash stock rom. You can't just bring back stock recovery. You have to "delete" root as well.
There is some info http://forum.xda-developers.com/showpost.php?p=47495650&postcount=6
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
CromoPT said:
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
Click to expand...
Click to collapse
Hi, thanks for your replies. Because of your report and others, who state the same (installing stock recovery only to get the update working) I was hoping to get around going back to full stock. It always takes a lot of time to configure the phone the way it was configured before essentially wiping.
Just to repeat what I did: when I try to install the OTA while CWM is installed there's just an error message in CWM, the update fails, but the phone is working normally afterwards. It's just not updated.
When I try with stock recovery the update process finishes without errors, but the phone get stuck during the boot animation.
Maybe there's a way to fix the boot loop?
Looking forward to any suggestions
Cheers, Kleo2
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Kleo2 said:
I tried again and found a way without going back to full stock.
Click to expand...
Click to collapse
Thanks. :good: Did 1 to 3 and phone booted just fine (not stuck on boot animation)
My phone: No logo fix, root, Xposed Framework
After update root was still there, Xposed needed a new install
total noob
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Papshmir said:
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Click to expand...
Click to collapse
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Thanks!
Kleo2 said:
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Click to expand...
Click to collapse
Thanks,
Wiping cache and dalvik cache did the trick for me. You saved my day
Please please help
I have the same problem. I've tried to update the new OTA and failed. After restoring full stock rom, the system simply doesn't boot!
I had Faux Kernel and GravityBox but I didn't revert anything. I thought that a full stock rom would clear all system settings.
This is my version of stock (Blur_Version.174.44.9.falcon_umts.Retail.en.GB) and I tried to flash it several times now. No success. I get stuck on the boot logo.
I tried to downgrade to 4.3 using version Blur_Version.14.71.8.falcon_umts.Retail.en.GB. I was able to boot and see the initial setup but I have no WIFI! I was trying to install 4.3 then try to update via OTA but OTA only works with WIFI so I'm stuck.
I also tried installing the 24th Feb nightly build of Cyanogen and the device also booted but with no WIFI.
I really don't know what to do! Please help me. I've tried other stock images out of despair but none with sucess.
Does anyone have a clue to what might be to problem and how to revert it?
Thank you
draco259 said:
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Click to expand...
Click to collapse
Before flashing stock ROM try to clear/format all your partitions with a custom recovery!
Sent from my XT1032 using xda app-developers app
I installed the OTA update using the CWM recovery but not root, I changed the update-script to not give error during installation
Hui91 said:
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
Click to expand...
Click to collapse
At part 8, I am getting an image of the android guy with his stomach open with a big red '!'. That's 'no command' right?
Any ideas? I have no idea what I am doing
Guys, a really easy way to update is:
1. Install Philz recovery - http://forum.xda-developers.com/showthread.php?t=2639583
2. Reboot and then download the OTA update when prompted - select Install when prompted
3. It will now reboot into Philz recovery, install the update and reboot
4. You'll see Android is Upgrading...
5. Re-boot back into recover and re-install faux kernel
I have just upgraded my XT1032 on 174.44.9 en GB (rooted + faux008) to 176.44.1 using this... worked like a dream! All I had to do was re-install faux kernel as that was overwritten by the OTA, but Root was in-tact...
i have root, twrp recovery and faux kernel, the problem is only faux kernel? Or I must remove all? (root recovery etc)
Hi folks,
I'm a little kerfluffled if you will by the sheer number of threads - search isn't pointing me to a thread that deals with this - so apologies if this has been answered before.
I originally rooted my phone with towelroot. I kept stock but installed a few things like Xposed, greenify, gravity box, etc... (also i switched to ART some time back).
Once i received the OTA notification, I deactivated greenify and gravity box, then uninstalled them, then "unrooted" the phone using SuperSU. I did forget to reset my "startup animation" but otherwise everything seems fine. The root checker confirms that the phone is no longer rooted. Since i forgot to backup the stock animation i just renamed the .zip and now when i boot the animation just says Android (with a little animation regarding the color of the letters).
I then DLed the update, restarted and approximately 30 ~ 40% of the way through the update screen it freezes up and then i get the little android dude with his belly open and the red error triangle. The text below says "error" but provides no further information. The only way to resolve the issue is to power off the phone and then turn it back on. It goes back into 4.4.4 and works fine but i can't get past that error and have no idea how to tell what the error actually is.
Any suggestions will be appreciated! I would prefer to not have to wipe my phone if at all possible.
You'll must wipe your phone as I am. Then you'll be able to OTA update your phone.
I do exactly like you, but error appears every time in the middle of update process. After wipe everything was fine
Fastboot flash the new factory images one by one. Reboot the bootloader in between each image, just to be safe. Then use chain fire auto root. It'll take you about 20 min. You will lose all info on your device though.
To save your information, you need to get back to totally stock, unmodified 4.4.4. So flash that in fastboot, just don't flash the user data. Then you can accept the ota.
Even modifying the boot image will cause an ota to throw out an error.
Lokke9191 said:
Fastboot flash the new factory images one by one. Reboot the bootloader in between each image, just to be safe. Then use chain fire auto root. It'll take you about 20 min. You will lose all info on your device though.
To save your information, you need to get back to totally stock, unmodified 4.4.4. So flash that in fastboot, just don't flash the user data. Then you can accept the ota.
Even modifying the boot image will cause an ota to throw out an error.
Click to expand...
Click to collapse
Since I'm not concerned about root in Lollipop for now - if i can find the original boot animation and "reinstall it" so to speak - will that allow me to use the ota without having to wipe my phone?
Not for sure. To guarantee it will work. Fastboot flash 4.4.4 system.img, boot.img, and recovery.img.
Lokke9191 said:
Not for sure. To guarantee it will work. Fastboot flash 4.4.4 system.img, boot.img, and recovery.img.
Click to expand...
Click to collapse
okay thanks! i'm going to try and find the original boot animation somehow and if that doesn't solve the problem, i'm going to fastboot everything.
Just dont flash userdata, or you'll lose your setup.
Lokke9191 said:
Just dont flash userdata, or you'll lose your setup.
Click to expand...
Click to collapse
thanks mate!
When I attempt to go to Cofface's Baidu page to download his 5.1 TWRP version, I get a message saying the content is no longer available. Specifically, Google Translate shows "Lol, you visit the page does not exist." Does anyone happen to have a copy they're willing to share? Or is there some issue with the 5.1 version that would suggest that I shouldn't use it? If I shouldn't ask for some reason, I apologize. Otherwise, thanks in advance.
https://yadi.sk/d/5YI63uiAhz5UD/Recovery/TWRP
Thanks very much for the link! I think I must have some deeper problems, as every time I flash this recovery (and another version I found in my old downloads), I just get stuck in a boot loop. I was able to use TWRP when I was on B015, but for some reason, I can't get it to work on B106. I'm using:
fastboot flash recovery c:\android\twrp_cn.img
However, like I said I just get stuck in a boot loop. When I flash the stock recovery, everything starts working again.
wpennhokie said:
Thanks very much for the link! I think I must have some deeper problems, as every time I flash this recovery (and another version I found in my old downloads), I just get stuck in a boot loop. I was able to use TWRP when I was on B015, but for some reason, I can't get it to work on B106. I'm using:
fastboot flash recovery c:\android\twrp_cn.img
However, like I said I just get stuck in a boot loop. When I flash the stock recovery, everything starts working again.
Click to expand...
Click to collapse
Did you unlock your bootloader?
Yes, it is. I was able to run TWRP when I was on B015. The phone is rooted, so I've just been using Titanium Backup to back everything up before I wipe the phone, but it would be nice to take a Nandroid backup instead of having to reinstall from TB.
wpennhokie said:
Yes, it is. I was able to run TWRP when I was on B015. The phone is rooted, so I've just been using Titanium Backup to back everything up before I wipe the phone, but it would be nice to take a Nandroid backup instead of having to reinstall from TB.
Click to expand...
Click to collapse
Thats the same problem I have. I used the other twrp recovery https://mega.nz/#!l5kmUByA!41uExNuasZRgLBML9TTSp8myX-_F6UgQZuE2F2BRZUE
This one worked with out boot loops for me. you can give it a shot.
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
wpennhokie said:
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
Click to expand...
Click to collapse
I had that exact same problem twice on Kangvip B015. When I would restart it would all of a sudden automatically boot into TWRP every time and never boot into the OS. When that happens, in TWRP make a backup, then Fastboot flash the stock ROM (system, boot, cust, recovery, user data etc) then when it boots do a factory data reset, then reroot, flash TWRP and restore from the backup you made. The OS will boot from your backup. I dunno why this happens, maybe it has something to do with with Kernel.
I've tried it a couple of times now, and I'm still not getting it to boot past TWRP once I flash the recovery. It was able to take a backup with TWRP, but when I restored it, I still had to restore the stock recovery before I could boot into the system. At worst, at this point, I can always flash TWRP, take a backup, flash the stock recovery, and then have my system back. It's a few extra steps, but I think I'll do this until I find a custom ROM that I like. I greatly appreciate the help so far.
wpennhokie said:
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
Click to expand...
Click to collapse
Reflash the stock b106 recovery and wipe user data and cache, Then reflash twrp recovery and restore your backup. It should boot then.
To follow up, I tried using the updated version of TWRP that you (mtyler7807) posted in the development thread and following the instructions above. I can flash the recovery, boot into it, and take a backup. After that, as long as I boot into the system, I'm fine. However, once I boot into recovery for the first time after that initial backup, it just reboots into TWRP every time. So, right now, I took a backup a day or so ago, and I've just avoided going back in to TWRP again. I have another X2 on the way (a 32GB version), so I'm hoping that I'll have better luck with that one.
wpennhokie said:
To follow up, I tried using the updated version of TWRP that you (mtyler7807) posted in the development thread and following the instructions above. I can flash the recovery, boot into it, and take a backup. After that, as long as I boot into the system, I'm fine. However, once I boot into recovery for the first time after that initial backup, it just reboots into TWRP every time. So, right now, I took a backup a day or so ago, and I've just avoided going back in to TWRP again. I have another X2 on the way (a 32GB version), so I'm hoping that I'll have better luck with that one.
Click to expand...
Click to collapse
By any chance, did you delete anything from the Cust Folder at any point?
ajsmsg78 said:
By any chance, did you delete anything from the Cust Folder at any point?
Click to expand...
Click to collapse
As far as I know, I have not. I did do a complete wipe of everything (except the SD card) at one point using TWRP, but I've always restored the system using the stock system.img file. Right now, the Cust folder is showing five folders, with several more folders/files underneath. Is there a particular file I should be checking for?
wpennhokie said:
As far as I know, I have not. I did do a complete wipe of everything (except the SD card) at one point using TWRP, but I've always restored the system using the stock system.img file. Right now, the Cust folder is showing five folders, with several more folders/files underneath. Is there a particular file I should be checking for?
Click to expand...
Click to collapse
I don't think so. It's weird how some of us have different problems than others. I've had zero issues with TWRP but lately my screen has been going crazy. My touches don't work, things jump it's like my digitizer is messed up but when I restart everything is fine again. So I reloaded everything and the problem went away. I guess I debloated too much last time.
I'm gonna keep it simple, here is the scenario:
ROM is corrupted.
Bootloader is unlocked.
FRP lock is on. (fastboot can't do much)
TWRP was flashed back to stock.
Stock hard-reset fails. (even wipe option)
Force upgrade stops at 5% (swear I am using the same one)
eRecovery does not work.
Can't flash. Can't push files.
Wat do.
Model: BLN-L24C567B369 (pretty sure this was it)
Whole story:
This whole episode began when I wanted to install Magisk to use MagiskManager's HideMe feature. This required me to install TWRP recovery which inturn lead me to unlock my bootloader in the process, straightforward and went off nicely. Now it was time to gain superuser which I already had done before on another device, installing SuperSU through TWRP recovery was painless but after booting found out MagiskManager needs Magisk Root to work. I then followed Android Exlpained's article to do so. Running unSU through recovery went smoothly but running Magisk didn't, on the initial run I was prompted to use Adrian DC's BootBridge which after removing a few Assert lines ran nicely. However there was no root install, SuperSU was removed though.
At the time I wasn't sure what exactly I was doing and ended up soft-bricking by flash boot through TWRP, at this time FRP was unlocked. After many many hours I restored to stock firmware by using YMNDLZ's guide. I used BLN-L24C567B370(OTA-MF-FULL) for the img files then proceed to flash the vendor.img using TWRP and the rest (boot.img, recovery.img, system.img) using fastboot in that order as instructed. The only part which didn't work was the forced update, it always failed at 5% however after more hours going recovery mode (now stock) wiping the cache and data/factory reset did the trick (Note: my model showed BLN-L24C567B369). I proceeded to reinstall TWRP, installed MagiskManager, tried to install Magisk 16.0 which ran but didn't root me but was fine because MagiskManager's download worked. I then thought since I went through all this trouble might as well install a custom rom, EliteRom was my ROM of choice. At this point I had logged in with my gmail credentials FRP was now locked.
*Before further action was taken I took the precaution to backup my current stable stock ROM after installing EliteROM but before booting*
The steps to install EliteROM went by flawlessly, installed EliteTWRP reboot into it, ran EliteROM
went through the setup without any hiccups. However up system restart I the ROM wouldn't boot leading me to boot into my recovery only to be prompted for an encryption password (???). Since I didn't recall setting one, couldn't boot into the OS, and FRP was locked I couldn't read my own internal storage. So I reformatted the internal storage and tried what had worked before, flashing the img files using TWRP then booting into stock recovery wiping cache and data/hard reset. . . this did not work. And here I am FRP locked so fastboot isn't useful (I think?), stock recovery doesn't work, eRecovery fails connection, and force update still fails at 5% with "Software install failed!".
Click to expand...
Click to collapse
Lemme know if there is any insight anyone can provide and thanks in advance.
This problem has been solved?
MisterRee said:
I'm gonna keep it simple, here is the scenario:
ROM is corrupted.
Bootloader is unlocked.
FRP lock is on. (fastboot can't do much)
TWRP was flashed back to stock.
Stock hard-reset fails. (even wipe option)
Force upgrade stops at 5% (swear I am using the same one)
eRecovery does not work.
Can't flash. Can't push files.
Wat do.
Model: BLN-L24C567B369 (pretty sure this was it)
Lemme know if there is any insight anyone can provide and thanks in advance.
Click to expand...
Click to collapse
you have to follow only xda methods to root or change to custom rom. i have never heard about flashing stock images from twrp. i think u didn't followed elite rom instructions clearly. you need to formate data then reboot to recovery then wipe everything then flash the os in this way you won't get encription error. anyway now your frp is locked so there is no way to flash twrp so download all the available firmwares for your phone oeminfo then do flashing via dload you will get it worked.
even i was also once stuck with elite rom. i didn't liked it because missing apps icon and forgetting permission. i tried to go back to stock but stuck at 5% error. then went to google searched stock rom for honor 6x india and downloaded nearly 3 roms last one worked helped me to get back to stock.
never flash system images boot,vendor etc from fastboot and twrp unless you are on emui8 and going to try gsi roms.
hey i cant revert back to stock rom. it fails to get package from server. does jio voice calling works on this device?? if no then plz guide me how to go back to stock rom..
MisterRee said:
I'm gonna keep it simple, here is the scenario:
ROM is corrupted.
Bootloader is unlocked.
FRP lock is on. (fastboot can't do much)
TWRP was flashed back to stock.
Stock hard-reset fails. (even wipe option)
Force upgrade stops at 5% (swear I am using the same one)
eRecovery does not work.
Can't flash. Can't push files.
Wat do.
Model: BLN-L24C567B369 (pretty sure this was it)
Lemme know if there is any insight anyone can provide and thanks in advance.
Click to expand...
Click to collapse
Register for update using firmware finder and Puts dns address in the router settings and then use erecovery
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
kozaqu said:
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
Click to expand...
Click to collapse
That got me in the right direction and I can at least get back into recovery now. Thanks! :good:
Also in the same boat
mkhopper said:
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Click to expand...
Click to collapse
I'm also sort of in the same boat i had a custom rom installed and decided to go back to stock os and now i'm stuck at either the Nvidia Logo or the Fastboot menu there's nothing else it let's me do i'd take any advice at this point. I can use Fastboot commands and I've tried Flashing Twrp.img and also flashing all the stock os which goes through with no problems i reboot the device and it's just stuck at the Nvidia logo
Ps: how did you manage to get back into recovery
Hello.
I think i had the same Problem.
I Flashed a Custom Rom, MiniGapps and the tegra...Battery file and since then i had boot loop an the NVidia Logo.
The Problem was: i flashed the tegra-Battery.ZIP file!!!
I noticed that i have to unzip it and flash teh tegra-..battery.DTP file.
since then it booted up again.
the OpenGappMini was buggy. it worked with the Nano!
Hope this helps for you as well!
OMG you guys. I did the exact same damn thing. Flashed the ZIP instead of the DTP file. 100 million thanks to you. I'm going to give it a shot now.
It worked! I wonder how many other folks didn't realize it wasn't a zip to flash to dtb and bricked their devices.