Backstory: I tried to load Cyanogenmod on my phone; but first I had to load TWRP recovery in order to get to load it. This is where the issue came; I decided to go the easy route and attempted to install it through Flashify (an app on the Google Play store); upon restarting my phone; it was bricked. I went into EVERYTHING, when I tried to go into recovery it would just send me through the bootloop and then send me to AP Fastboot.
Confused, I called Motorola; and was notified and Flashify had removed my prevoius recovery and failed to but TWRP resulting in this.
Issue: So what I did is I got the CWM recovery specific for my phone (XT926) and went into ADB fastboot and typed "fastboot flash cwm.img", from my ADB folder of course. Then when I booted into recovery, nothing happened; it would just send me through the bootloop again. Please help.
angrygamer1023 said:
Backstory: I tried to load Cyanogenmod on my phone; but first I had to load TWRP recovery in order to get to load it. This is where the issue came; I decided to go the easy route and attempted to install it through Flashify (an app on the Google Play store); upon restarting my phone; it was bricked. I went into EVERYTHING, when I tried to go into recovery it would just send me through the bootloop and then send me to AP Fastboot.
Confused, I called Motorola; and was notified and Flashify had removed my prevoius recovery and failed to but TWRP resulting in this.
Issue: So what I did is I got the CWM recovery specific for my phone (XT926) and went into ADB fastboot and typed "fastboot flash cwm.img", from my ADB folder of course. Then when I booted into recovery, nothing happened; it would just send me through the bootloop again. Please help.
Click to expand...
Click to collapse
Try another recovery / another version. Did the trick for me and you have nothing to lose
I have 2 XT925s. I bricked one to the point that I could boot to fastboot but could not even get into stock recovery. I was running stock 4.4.2.
I did the following.
I got the DROID_RAZR_HD_Utility_1.41. I used the TWRP 2.7.1.0 in that utility specifically for XT925.
I used fastboot to manually flash TWRP into the recovery partition.
DO NOT reboot past boot menu. Right after flashing, boot into recovery. That should give you TWRP.
I used TWRP to Install CM11 snapshot. I had to manually flash into the modem partition, the modem file also obtained from the above utility. You will need to flash in gapps for 4.4.2.
That recovered the bricked phone.
Of note, I was able to flash TWRP in the other phone. Backed it up. Transfered the backed up OEM ROM into the phone running CM. And get it to run stock ROM.
I now have one running CM11, and one running stock 4.4.2. I'm just comparing battery life. I've noticed CM11 has a smaller memory footprint than stock 4.4.2.
Cheers
did not work for me anywhere to be found stock 4.4.2 recovery img for 926?
Related
I tried using superboot to root my nexus s, but ended up with having a stuck google screen upon reboot.
Is there anyway I can recover my phone to the original state. I can get into the boot screen by pressing up volume and the power button and I have downloaded an original rom; however, I don't know how to upload this rom
into the phone.
I unlocked the bootloader, and have the android SDK installed. I do have a response when I use the command "fastboot devices"
Is there any possible way to save my phone? Please help, Thanks in advance
is there a recovery image saved under the recovery option?
Hey I'm having the exact same problem as the OP.
I don't have a recovery image saved in recovery, so I tried to flash the latest CWM recovery image through adb, but the device isn't found.
My phone was rooted, then upgraded to 2.3.4, then got 2.3.6 OTA, but lost root. Tried to root with Superboot and now my phone's stuck.
How can I get my phone to work again?
ri ch said:
Hey I'm having the exact same problem as the OP.
I don't have a recovery image saved in recovery, so I tried to flash the latest CWM recovery image through adb, but the device isn't found.
My phone was rooted, then upgraded to 2.3.4, then got 2.3.6 OTA, but lost root. Tried to root with Superboot and now my phone's stuck.
How can I get my phone to work again?
Click to expand...
Click to collapse
You have to flash CWM using fastboot, not adb.
fastboot flash recovery recovery.img
Once you have the custom recovery flashed you can flash superuser in CWM to get root back or just flash one of the custom ROMs that include superuser.
Yes, I did exactly that.
I really have no idea what I'm doing so I'm extremely grateful for people who do.
Thanks
I am in the same boat as these other chaps. After installing the 2.3.6 OTA update I tried to root with Superboot and now my Nexus S just sits on the Google screen with the open padlock.
I've tried installing CWM recovery, as well as the boot.recovery.img that comes with Superboot, and it seems to install successfully. After rebooting my phone still sits on the Google screen, however.
Am I doing something wrong here (I'd previously rooted with few problems)?
EDIT: I should mention that after flashing the .img I'm trying to boot into recovery - at this point it just sits on the Google screen.
EDIT 2: Never mind, I sorted it. I tried using a different recovery.img (from this thread) and I was then able to get into recovery and restore a backup.
So, I'm in a bad spot with my Nexus S 4g. I had CWR installed on it and flashed a new rom yesterday to try it out, I had been running Deck's rom. I don't remember what the name of the rom was I flashed yesterday, but I didn't care for it so I was going to flash MIUI this morning. When i went to boot into recovery it brought me to the fastboot screen and said no boot or recovery img. From there I rebooted back to the rom I have loaded and tried to search around on the interwebs a little. I went into ROM Manager and tried to reflash the recovery, but that didn't work as upon reboot it did the same thing in returning to fastboot everytime. I did some more searching and I found info on an app called flash image that's in the app store that will flash kernels and recovery's. So I dl'd it and tried to reflash clockwork recovery from there. It gave me an error about not enough free space on the device. I went back to ROM Manager and set it to erase the current recovery before it flashed the new one in hopes that it would resolve the issue. So I reflashed the recovery again and went to boot to recovery. Now I can't get past the bootloader/fastboot screen at all. It won't boot to android, it won't boot to recovery. My pc won't recognize the phone to allow me to install the drivers for adb...I'm at a loss.
Any help would be greatly appreciated as I have no idea what to do next.
Thanks in advance...
Did you try to flash recovery through the computer from the cmd window, Because ROM manager doesn't flash recovery properly sometimes.
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
ttakacs said:
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
Click to expand...
Click to collapse
When you flashed to stock you erased your recovery.. Reconnect to your computer and push a recovery onto your phone and you're good to go..
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
ttakacs said:
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
Click to expand...
Click to collapse
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Setting.Out said:
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Click to expand...
Click to collapse
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
ttakacs said:
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
Click to expand...
Click to collapse
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Setting.Out said:
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
ttakacs said:
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
Click to expand...
Click to collapse
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Setting.Out said:
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Click to expand...
Click to collapse
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
ttakacs said:
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
Click to expand...
Click to collapse
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Sent from my Nexus S using xda premium
Setting.Out said:
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Click to expand...
Click to collapse
I am too. Every method known to me (Odin, fastboot, adb) to flash a ROM, whether custom or stock, has failed to boot. Thanks for hanging with me on this; if you can think of solution I'll be glad to have it. Or if I solve it, I'll post here.
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
also it says invalid "boot image header!" in red letters
http://forum.xda-developers.com/showthread.php?t=2542219
Install full factory image with fastboot.
P.Kosunen said:
http://forum.xda-developers.com/showthread.php?t=2542219
Install full factory image with fastboot.
Click to expand...
Click to collapse
Alright thankyou!
I got everything to work again but I still can't flash roms. They just bootloop :S
It could be too big recovery install with fastboot causes problem, every recovery cwm/twrp i tried to install with fastboot fails.
http://forum.xda-developers.com/showpost.php?p=49559872&postcount=234
Twrp_MotoG_signed_010814_163615.zip
Download vocoderisms TWRP build, extract "recovery.img" from it.
After you have kitkat installed and working:
Option 1, use TWRP without install:
Boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img) and install rom from there.
Option 2, install TWRP (have not tested):
Upload twrp zip to phone (adb push Twrp_MotoG_signed_010814_163615.zip /sdcard/), boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img), install Twrp_MotoG_signed_010814_163615.zip.
Misterowl said:
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B2LP8tI1Xwu4MGtPTlpVcVQxN0k/preview this cwm worked for me
You do know flashing stock again removes root, so it has to be rerooted again ?
aradalien said:
You do know flashing stock again removes root, so it has to be rerooted again ?
Click to expand...
Click to collapse
Yes I am very aware and followed through with root with that outcome.
kieranc88 said:
https://docs.google.com/file/d/0B2LP8tI1Xwu4MGtPTlpVcVQxN0k/preview this cwm worked for me
Click to expand...
Click to collapse
CWM doesn't work it. It boots up (Im used cyanogenmod) the cyanogenmod boot animation but just stays there.
P.Kosunen said:
It could be too big recovery install with fastboot causes problem, every recovery cwm/twrp i tried to install with fastboot fails.
http://forum.xda-developers.com/showpost.php?p=49559872&postcount=234
Twrp_MotoG_signed_010814_163615.zip
Download vocoderisms TWRP build, extract "recovery.img" from it.
After you have kitkat installed and working:
Option 1, use TWRP without install:
Boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img) and install rom from there.
Option 2, install TWRP (have not tested):
Upload twrp zip to phone (adb push Twrp_MotoG_signed_010814_163615.zip /sdcard/), boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img), install Twrp_MotoG_signed_010814_163615.zip.
Click to expand...
Click to collapse
I've flashed twrp too and came out with the same outcome.
stuck in fastboot
Misterowl said:
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
Click to expand...
Click to collapse
Exactly i am also facing same problem....
mobile unable to instal firmware...
still i am searching for solution ...
guys plz help me
I thought I am the only one with this problem..After mailing the phone to SC and got it back after 2 months, the phone still looks the same, just like they did nothing to fix it.
Recently I decided to try flashing a custom rom onto my old phone, a Gionee F103 Pro. Since it is quite obscure it isn't officially supported by twrp, but I managed to find an unofficial build. I unlocked the bootloader and flashed twrp using fastboot, and according to the console it was successful. When I booted my phone twrp began to load, but then there were multiple 'unable to mount' and 'failed to mount' errors and it rebooted. This has been repeating for almost an hour now. It's unresponsive to any button presses, and it won't show up on the device manager either. The only way I've got it to stop was by removing the battery. I've tried fastboot mode, recovery mode and regular boot but they all end up the same. I'd be grateful if anyone could could help me fix this.
Thanks!
fibonazi said:
Recently I decided to try flashing a custom rom onto my old phone, a Gionee F103 Pro. Since it is quite obscure it isn't officially supported by twrp, but I managed to find an unofficial build. I unlocked the bootloader and flashed twrp using fastboot, and according to the console it was successful. When I booted my phone twrp began to load, but then there were multiple 'unable to mount' and 'failed to mount' errors and it rebooted. This has been repeating for almost an hour now. It's unresponsive to any button presses, and it won't show up on the device manager either. The only way I've got it to stop was by removing the battery. I've tried fastboot mode, recovery mode and regular boot but they all end up the same. I'd be grateful if anyone could could help me fix this.
Thanks!
Click to expand...
Click to collapse
Can you flash a copy of stock recovery.img via fastboot?
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Can you flash a copy of stock recovery.img via fastboot?
Click to expand...
Click to collapse
I tried to boot my phone into fastboot but it goes straight to twrp instead. My PC doesn't seem to detect it either.
fibonazi said:
I tried to boot my phone into fastboot but it goes straight to twrp instead. My PC doesn't seem to detect it either.
Click to expand...
Click to collapse
If there is a LineageOS ROM or some other custom ROM available for your device, try flashing a ROM.
If that doesn't work...
Flash a copy of stock recovery.img via TWRP. TWRP has the ability to flash .img files.
Or, if you can find a copy of your stock recovery that has been converted into a TWRP flashable .zip, you can flash that .zip via TWRP then reboot the device into recovery mode to see if it boots stock recovery.
If you can't get that to work, TWRP has a terminal emulator built in, you can try flashing stock recovery.img using dd commands in the TWRP terminal. You'll have to research your devices partition structure to get the correct dd command to make sure that the recovery gets flashed to the correct partition.
I'm only saying to do all of this because it seems that screwing with the recovery partition caused the issue, maybe, restoring/repairing the recovery partition might fix the issue.
If not, you'll have to find a fix that involves flashing your stock firmware or stock system.img.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
If there is a LineageOS ROM or some other custom ROM available for your device, try flashing a ROM.
If that doesn't work...
Flash a copy of stock recovery.img via TWRP. TWRP has the ability to flash .img files.
Or, if you can find a copy of your stock recovery that has been converted into a TWRP flashable .zip, you can flash that .zip via TWRP then reboot the device into recovery mode to see if it boots stock recovery.
If you can't get that to work, TWRP has a terminal emulator built in, you can try flashing stock recovery.img using dd commands in the TWRP terminal. You'll have to research your devices partition structure to get the correct dd command to make sure that the recovery gets flashed to the correct partition.
I'm only saying to do all of this because it seems that screwing with the recovery partition caused the issue, maybe, restoring/repairing the recovery partition might fix the issue.
If not, you'll have to find a fix that involves flashing your stock firmware or stock system.img.
Click to expand...
Click to collapse
Actually, the problem I'm having is that twrp runs into an error and shuts down before I can do anything on it. It is stuck in an endless boot loop and is unresponsive to any button or screen presses. I have a lineage os rom, but I don't have any way to flash it right now. Is there any way to make it responsive again? Or any way to connect it to a pc?