Database Info

[Q] Red Triangle, Dead Android

After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.

ttakacs said:
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
Click to expand...
Click to collapse
When you flashed to stock you erased your recovery.. Reconnect to your computer and push a recovery onto your phone and you're good to go..

Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."

ttakacs said:
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
Click to expand...
Click to collapse
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.

Setting.Out said:
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Click to expand...
Click to collapse
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?

ttakacs said:
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
Click to expand...
Click to collapse
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium

Setting.Out said:
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.

ttakacs said:
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
Click to expand...
Click to collapse
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.

Setting.Out said:
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Click to expand...
Click to collapse
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?

ttakacs said:
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
Click to expand...
Click to collapse
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Sent from my Nexus S using xda premium

Setting.Out said:
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Click to expand...
Click to collapse
I am too. Every method known to me (Odin, fastboot, adb) to flash a ROM, whether custom or stock, has failed to boot. Thanks for hanging with me on this; if you can think of solution I'll be glad to have it. Or if I solve it, I'll post here.

Stuck in Fastboot

Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.

also it says invalid "boot image header!" in red letters

http://forum.xda-developers.com/showthread.php?t=2542219
Install full factory image with fastboot.

P.Kosunen said:
http://forum.xda-developers.com/showthread.php?t=2542219
Install full factory image with fastboot.
Click to expand...
Click to collapse
Alright thankyou!
I got everything to work again but I still can't flash roms. They just bootloop :S

It could be too big recovery install with fastboot causes problem, every recovery cwm/twrp i tried to install with fastboot fails.
http://forum.xda-developers.com/showpost.php?p=49559872&postcount=234
Twrp_MotoG_signed_010814_163615.zip
Download vocoderisms TWRP build, extract "recovery.img" from it.
After you have kitkat installed and working:
Option 1, use TWRP without install:
Boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img) and install rom from there.
Option 2, install TWRP (have not tested):
Upload twrp zip to phone (adb push Twrp_MotoG_signed_010814_163615.zip /sdcard/), boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img), install Twrp_MotoG_signed_010814_163615.zip.

Misterowl said:
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B2LP8tI1Xwu4MGtPTlpVcVQxN0k/preview this cwm worked for me

You do know flashing stock again removes root, so it has to be rerooted again ?

aradalien said:
You do know flashing stock again removes root, so it has to be rerooted again ?
Click to expand...
Click to collapse
Yes I am very aware and followed through with root with that outcome.
kieranc88 said:
https://docs.google.com/file/d/0B2LP8tI1Xwu4MGtPTlpVcVQxN0k/preview this cwm worked for me
Click to expand...
Click to collapse
CWM doesn't work it. It boots up (Im used cyanogenmod) the cyanogenmod boot animation but just stays there.
P.Kosunen said:
It could be too big recovery install with fastboot causes problem, every recovery cwm/twrp i tried to install with fastboot fails.
http://forum.xda-developers.com/showpost.php?p=49559872&postcount=234
Twrp_MotoG_signed_010814_163615.zip
Download vocoderisms TWRP build, extract "recovery.img" from it.
After you have kitkat installed and working:
Option 1, use TWRP without install:
Boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img) and install rom from there.
Option 2, install TWRP (have not tested):
Upload twrp zip to phone (adb push Twrp_MotoG_signed_010814_163615.zip /sdcard/), boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img), install Twrp_MotoG_signed_010814_163615.zip.
Click to expand...
Click to collapse
I've flashed twrp too and came out with the same outcome.

stuck in fastboot
Misterowl said:
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
Click to expand...
Click to collapse
Exactly i am also facing same problem....
mobile unable to instal firmware...
still i am searching for solution ...
guys plz help me

I thought I am the only one with this problem..After mailing the phone to SC and got it back after 2 months, the phone still looks the same, just like they did nothing to fix it.

Flash recovery not working!

Backstory: I tried to load Cyanogenmod on my phone; but first I had to load TWRP recovery in order to get to load it. This is where the issue came; I decided to go the easy route and attempted to install it through Flashify (an app on the Google Play store); upon restarting my phone; it was bricked. I went into EVERYTHING, when I tried to go into recovery it would just send me through the bootloop and then send me to AP Fastboot.
Confused, I called Motorola; and was notified and Flashify had removed my prevoius recovery and failed to but TWRP resulting in this.
Issue: So what I did is I got the CWM recovery specific for my phone (XT926) and went into ADB fastboot and typed "fastboot flash cwm.img", from my ADB folder of course. Then when I booted into recovery, nothing happened; it would just send me through the bootloop again. Please help.

angrygamer1023 said:
Backstory: I tried to load Cyanogenmod on my phone; but first I had to load TWRP recovery in order to get to load it. This is where the issue came; I decided to go the easy route and attempted to install it through Flashify (an app on the Google Play store); upon restarting my phone; it was bricked. I went into EVERYTHING, when I tried to go into recovery it would just send me through the bootloop and then send me to AP Fastboot.
Confused, I called Motorola; and was notified and Flashify had removed my prevoius recovery and failed to but TWRP resulting in this.
Issue: So what I did is I got the CWM recovery specific for my phone (XT926) and went into ADB fastboot and typed "fastboot flash cwm.img", from my ADB folder of course. Then when I booted into recovery, nothing happened; it would just send me through the bootloop again. Please help.
Click to expand...
Click to collapse
Try another recovery / another version. Did the trick for me and you have nothing to lose

I have 2 XT925s. I bricked one to the point that I could boot to fastboot but could not even get into stock recovery. I was running stock 4.4.2.
I did the following.
I got the DROID_RAZR_HD_Utility_1.41. I used the TWRP 2.7.1.0 in that utility specifically for XT925.
I used fastboot to manually flash TWRP into the recovery partition.
DO NOT reboot past boot menu. Right after flashing, boot into recovery. That should give you TWRP.
I used TWRP to Install CM11 snapshot. I had to manually flash into the modem partition, the modem file also obtained from the above utility. You will need to flash in gapps for 4.4.2.
That recovered the bricked phone.
Of note, I was able to flash TWRP in the other phone. Backed it up. Transfered the backed up OEM ROM into the phone running CM. And get it to run stock ROM.
I now have one running CM11, and one running stock 4.4.2. I'm just comparing battery life. I've noticed CM11 has a smaller memory footprint than stock 4.4.2.
Cheers

did not work for me anywhere to be found stock 4.4.2 recovery img for 926?

[Recovery Release] Working TWRP for Sony L1 (G3311 Single SIM others to be confirmed)

Requirements:
1. Bootloader Must Be Unlocked.
2. Have a backup of your working Magisk Patched boot.img saved to your External SDcard.​A little INFO:
The Sony L1 recovery seems to be disabled by SONY for some unknown and Probably stupid reason.
I have tried all ways to get the TWRP and Stock recovery to boot up from the fotakernel partition (recovery) but TWRP and even the stock recovery refuse to boot.
Anyway to cut a very long story short I am releasing this TWRP which is 95% functional and needs to be flashed to the boot partition
Working Method/flow:
Make sure you have a Back up of your working Boot.img "You know the one you used to root the device in the first place".
For ease of use You can use this app by XDA dev @wanam (Thread here) app on playstore Here You can also use this app to flash the v5-twrp-l1.img to your "boot" partition or you can go old skool and use dd (Via adb shell) or use the Magisk patched_boot.img you first rooted with..
Make SURE to Copy this working boot.img to your External SDcard.
When you require TWRP flash the downloaded TWRP to your boot partition using Fastboot (cmd's below) or the above app then reboot
You will now boot to TWRP.
Do what you need to do in TWRP.
IMPORTANT:
Remember Just before you leave TWRP go to INSTALL choose your external SDCard choose "image" from the install screen find your boot.img and select "boot" with the little radio button.
Once flashed choose reboot system.
Now when you boot you will be back to normal :good:
Things Not Working:
1. You will not be able to mount encrypted data therefore you would need to FORMAT your data and then leave it unencrypted.
SuperSU and Magisk will disable forceencrypt for you.
2. Does not Charge or show battery % so I don't know if it's actually charging. (Probably Qnovo battery module used by sony)
It will probably work on all variants but I am not able to test that.
It's use is for backups and restores wipes and installs for which it seems fully functional. :good:
Install Instructios.
Boot to the bootloader then
Code:
fastboot flash boot v5-twrp-l1.img
Then
Code:
fastboot reboot
Download HERE v5-twrp-l1.img

Hi @bigrammy!! I have it booting ok, obviously encryption is not working! I was able to do a backup but couldn't boot back into system, just keeps going back to twrp! I had to flashi the patched 3313 boot image from another post to get back into system! Good work though! Tested on g3311

Chronic2k13 said:
Hi @bigrammy!! I have it booting ok, obviously encryption is not working! I was able to do a backup but couldn't boot back into system, just keeps going back to twrp! I had to flashi the patched 3313 boot image from another post to get back into system! Good work though! Tested on g3311
Click to expand...
Click to collapse
:laugh:
Ok maybe I should update the OP as it seems it's not really clear enough that obviously the boot is replaced by the recovery.
Method would be make sure you have a Back up your working Boot.img You know the one you used to root the device in the first place.
You can also use dd (Via adb shell) or a app from the playstore or better still use the Magisk patched_boot.img .
Copy this working boot.img to your External SDcard.
When required flash the recovery to your boot partition using Fastboot then reboot
You will now boot to TWRP.
Do what you need to do in TWRP.
Then just before you leave TWRP go to INSTALL choose your external SDCard choose "image" from the install screen find your boot.img and select "boot" with the little radio button.
Once flashed choose reboot system.
Now when you boot you will be back to normal :good:
OP Updated let me know if it's clearer to understand now.
Thanks for reporting back. :good:

I'll give it a go! Many thanks! Just one question though. How do I enter recovery mode from then on? Is it still power down, power and volume down yeah?

Chronic2k13 said:
I'll give it a go! Many thanks! Just one question though. How do I enter recovery mode from then on? Is it still power down, power and volume down yeah?
Click to expand...
Click to collapse
I don't think you have really read or understood the OP
You are only ever flashing the "boot partition".
When you need to use TWRP you flash the TWRP.img to the boot partition and when your done you flash back your boot.img again to the boot partition as in the OP.
BTW Have you ever been able to enter the STOCK recovery using Power and Volume Down or using any commands
My phone could not enter the STOCK recovery at all let alone a custom one and since no one ever replied to my question about this I assumed this was the case for everyone as many sony devices from 7.0 had the recovery disabled?

I'm unable to get into stock recovery too!

So,
If we don't have a Recovery partition maybe we can
Create one...
Tutorial in here
https://iwf1.com/how-to-re-partitio...-all-options-included-change-size-fs-type-etc
I'll try it if i have time.

I tested twrp 2 times
Worked every time.
I've tried to install superSu.zip via twrp, looked all right, rebooted the phone and now it's in bootloop for over 2 hours...
It's getting hotter... i ca't turn it off
The only thing that works is keeping Power and Volume Up pressed and it looks restarting...
What can i do to revive it safely?

alegatorul said:
I tested twrp 2 times
Worked every time.
I've tried to install superSu.zip via twrp, looked all right, rebooted the phone and now it's in bootloop for over 2 hours...
It's getting hotter... i ca't turn it off
The only thing that works is keeping Power and Volume Up pressed and it looks restarting...
What can i do to revive it safely?
Click to expand...
Click to collapse
Mate you really need to be careful unless you really know what your doing
You will likely brick the phone if you continue to blindly mess with re-partitioning and the like.
If you were in TWRP which was flashed to the boot partition as directed in the OP then flashing the supersu.zip will simply modify your TWRP.img not your boot.img since TWRP is living in the boot partition at the time you run the .zip hence your looping.
This device has bootloader issues since it will not allow the booting of another partition except "boot" recovery, fotakernel, rdimage, all tested all failed to boot the TWRP recovery and stock recovery.
There is another method used by some sony devices but this will need to be heavily modified for this MediaTek SoC and will require a lot of study and script re-writes.
Spending all this time on a device that's pretty much obsolete before it was launched since it's not planned to receive oreo and Sony 90% locked down the bootloader is kinda futile so use the phone for what it is then throw it in the bin when done in a year or two.

Mate, you are right

Hi, please make recovery for L1 G3312 i hope you can do it.

tweak8 said:
Hi, please make recovery for L1 G3312 i hope you can do it.
Click to expand...
Click to collapse
I think this one may very well work for the dual SIM also so please try it and then report back with some actual details.
eg: bootloader status, firmware version, your region, etc etc.
Thanks.

Works great on the G3113 model, thank you for developing this! Now hoping to find a custom rom to install via .zip.

This "HERE v5-twrp-l1.img" is working in my Xperia L1 G3312.
But, after installing TWRP, phone does not get into boot normally. Everytime it boots into recovery mode. I think that it needs separate twrp partition. This twrp is overwriting the main boot. If anyone can make separate partition for TWRP recovery. This problem will be solved.

Hello. I ignored all your post like a retard and basically just went to the last step to flash the image. The twrp works but it wouldn't boot into normal mode but just boot to twrp everytime so I downloaded some random boot image I saw online and installed it. Now it's just stuck in the sony logo and won't even turn off. Is there anything I can do or is it rip for good?

dumb person said:
Hello. I ignored all your post like a retard and basically just went to the last step to flash the image. The twrp works but it wouldn't boot into normal mode but just boot to twrp everytime so I downloaded some random boot image I saw online and installed it. Now it's just stuck in the sony logo and won't even turn off. Is there anything I can do or is it rip for good?
Click to expand...
Click to collapse
No it's only the boot.img Flash the boot.img in this thread https://forum.xda-developers.com/xperia-l1/how-to/root-l1-g3313-magisk-t3693350 if you can get into fastboot that is.
If not then use FlashTool to flash the stock boot.sin and system.sin only. That should get you working again.

This "HERE v5-twrp-l1.img" is working in my Xperia L1 G3312.
But, after installing TWRP, phone does not get into boot normally. Everytime it boots into recovery mode. I think that it needs separate twrp partition. This twrp is overwriting the main boot. If anyone can make separate partition for TWRP recovery. This problem will be solved.
In twrp mode, I can do everything smoothly..... but phone does not get into boot normally..... After installing stock boot again, phone boot into normally, but twrp has gone completely..... So, it is clear that boot & twrp partition overwrites each other due to no separate partition.... So, we need separate partition for boot & twrp.... then everything will be solved...

bigrammy said:
No it's only the boot.img Flash the boot.img in this thread https://forum.xda-developers.com/xperia-l1/how-to/root-l1-g3313-magisk-t3693350 if you can get into fastboot that is.
If not then use FlashTool to flash the stock boot.sin and system.sin only. That should get you working again.
Click to expand...
Click to collapse
I downloaded the boot from the link you posted and flashed it. Now it phone works again. Many thanks!!

riadjblicd said:
This "HERE v5-twrp-l1.img" is working in my Xperia L1 G3312.
But, after installing TWRP, phone does not get into boot normally. Everytime it boots into recovery mode. I think that it needs separate twrp partition. This twrp is overwriting the main boot. If anyone can make separate partition for TWRP recovery. This problem will be solved.
In twrp mode, I can do everything smoothly..... but phone does not get into boot normally..... After installing stock boot again, phone boot into normally, but twrp has gone completely..... So, it is clear that boot & twrp partition overwrites each other due to no separate partition.... So, we need separate partition for boot & twrp.... then everything will be solved...
Click to expand...
Click to collapse
Yes but Sony Disabled the recovery partition (fotakernel) by design so you can not boot from it.
The OP is clear about the need to flash the TWRP to your boot partition and the reason I also give full instruction in the workflow/method but people simply don't read anymore it seems. :crying:
TWRP can be injected into the boot.img so you can boot normally or boot TWRP using the volume keys at boot time but I can't be bothered working on this since Sony are not going to update the Android Version.
While the phone is OK I have far better phones to spend my time on at the moment.

how to backup boot.img without root? if its impossible then how do i root this phone?

TWRP shows internal storage folders named as random letters.

I have a Redmi note 8 with MIUI 12 installed. Bootloader is unlocked and the phone is rooted.
When I try to flash TWRP recovery in fastboot mode using my PC, it successfully flashes and boots into the TWRP recovery. TWRP does not ask for any password for decrypting the files, and when I go to install>sdcard then the storage is all in random letters, completely unrecognizable.
I have tried a lot of tutorials on youtube but none of them worked. I tried flashing the latest version of TWRP, didn't work. I tried formatting all data and rebooting back into recovery mode, didn't work. (if you reboot to system after installing TWRP, the phone automatically deletes TWRP and the next time you open recovery mode you just get the default MI recovery, and you have to flash TWRP again to open TWRP recovery.) I tried almost everything on the internet but none of it worked. Is there any way I can make it ask for the decryption password? or have my files decrypted? I just need the TWRP for a one-time-use to install a custom ROM. I don't need it to be installed permanently, but no problem even if it does get installed permanently. I just want my custom ROM.
Please help

does that work?:
Boot into twrp, then
Code:
adb shell
twrp decrypt myPassword
(myPassword is your user password)

User699 said:
does that work?:
Boot into twrp, then
Code:
adb shell
twrp decrypt myPassword
(myPassword is your user password)
Click to expand...
Click to collapse
It didnt work, "failed to decrypt data" i typed the right password

#JKTheBaskieBoy said:
It didnt work, "failed to decrypt data" i typed the right password
Click to expand...
Click to collapse
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.

the correct and recommend way to install TWRP is
Flash TWRP
Erase userdata partition <~ it's important to do this as soon as possible since booting your device would just encrypt everything again
Format userdata partition
by doing this you would be able to access data partition files and folder would not be random letters.

User699 said:
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
Click to expand...
Click to collapse
Sorry for the late reply. Earlier i just gave up on installing the custom ROM and continued with my stock from. Today a tried again, installed TWRP and turns out it is not showing random letters now. its all regular storage. i didn't even do anything to decrypt it lol it just fixed itself. Now I will install the room myself. Thank you for your help though

Ah sh** here we go again. So i installed the custom rom successfully and everything worked fine, the TWRP too. but when I tried to flash a magisk patched image (the image that I used to root my phone in MIUI) then it got stuck in the boot screen. I had to flash the stock fastboot rom again.. And as expected from my piece of **** that xiaomi calls a phone, TWRP will show encrypted folders, and does not ask for a password. Same problem. Rooted my phone again, using the magisk root image, and it worked like usual, the phone rooted. Now i am stuck again in this bs. I guess I will wait for about 4-5 days and continue using the phone like normal. Maybe it will work again this time. I will try your method here first
User699 said:
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
Click to expand...
Click to collapse

Okay i tried wiping the data, cache and dalvik but it shows a huge essay of "error opening xxx/xxxx" in red text. Data wipe failed.
See you after like 4-5 days... hopefully

Update. I finally found a solution. It took literal hours of experimenting to find this.
-Flashed the fastboot ROM of the phone
-Rooted the phone by flashing magisk patched image
-Flashed Inception kernel via FK kernel manager
-Rebooting after flashing the kernel, It will get stuck in a black screen with no text whatsoever (probably a bootloop)
-Installed TWRP (This time TWRP does not show encrypted letters), Wiped all data, Transferred the custom ROM zip to the phone (while in TWRP) and flashing the rom
-The rom is flashed successfully. On the first reboot you get greeted with another bootloop. Fortunately the phone booted into TWRP. This time the folders are encrypted again.
-Successfully wiped the data (advanced>wipe data). No errors in data wiping this time.
-A fully working Corvus OS setup appears on rebooting.
I think the whole TWRP problem was fixed by the custom kernel. Anyways I am finally done with this now. You probably enjoyed seeing all this xD

#JKTheBaskieBoy said:
Update. I finally found a solution. It took literal hours of experimenting to find this.
-Flashed the fastboot ROM of the phone
-Rooted the phone by flashing magisk patched image
-Flashed Inception kernel via FK kernel manager
-Rebooting after flashing the kernel, It will get stuck in a black screen with no text whatsoever (probably a bootloop)
-Installed TWRP (This time TWRP does not show encrypted letters), Wiped all data, Transferred the custom ROM zip to the phone (while in TWRP) and flashing the rom
-The rom is flashed successfully. On the first reboot you get greeted with another bootloop. Fortunately the phone booted into TWRP. This time the folders are encrypted again.
-Successfully wiped the data (advanced>wipe data). No errors in data wiping this time.
-A fully working Corvus OS setup appears on rebooting.
I think the whole TWRP problem was fixed by the custom kernel. Anyways I am finally done with this now. You probably enjoyed seeing all this xD
Click to expand...
Click to collapse
I like that you keep trying and finding a solution, even though you had to invest hours to make it work!
Let's hope it will work if you update the OS though – I'd actually suggest a backup of all of your data before you do an update in the future, just to be safe!

#JKTheBaskieBoy said:
I have a Redmi note 8 with MIUI 12 installed. Bootloader is unlocked and the phone is rooted.
When I try to flash TWRP recovery in fastboot mode using my PC, it successfully flashes and boots into the TWRP recovery. TWRP does not ask for any password for decrypting the files, and when I go to install>sdcard then the storage is all in random letters, completely unrecognizable.
I have tried a lot of tutorials on youtube but none of them worked. I tried flashing the latest version of TWRP, didn't work. I tried formatting all data and rebooting back into recovery mode, didn't work. (if you reboot to system after installing TWRP, the phone automatically deletes TWRP and the next time you open recovery mode you just get the default MI recovery, and you have to flash TWRP again to open TWRP recovery.) I tried almost everything on the internet but none of it worked. Is there any way I can make it ask for the decryption password? or have my files decrypted? I just need the TWRP for a one-time-use to install a custom ROM. I don't need it to be installed permanently, but no problem even if it does get installed permanently. I just want my custom ROM.
Please help
Click to expand...
Click to collapse
tell me how to turn off a smartphone with a non-working sensor?

you can still use adb push command from pc to transfer files to your phone :
adb push "nameoffile" /sdcard
(place the file in your adb folder) I was able to root a phone that had this issue using this technique.

I think u should flash dm verity becoz when i flashed the rom and flashed dm verity it worked fine