I was doing my Droid root, I disconnect the USB cable when I was flashing with the PC, I was off I go right then and does not want to turn, do not enter the mode restore or anything, the only sign of life that givesIt is that when I connect to the PC detects the RSD lite, but I can not format it because it is in bootloader.
I need help. Thank You
Related
I have a defy mini LATAM version i tried to flash it with an indian defy mini sbf that was available on xda. The flash ran till rebooting the phone and then phone woudnt turn on not even to the boot loader mode. i tried everything i know to get it working(not even an led is turning on when i coonect it to the comp). i fully charged the battery using an external charger. when i connect the phone to my system it says unknown device i tried to re install the motorola drivers with no effect. any help as of how to flash the correct sbf would be welcome.
Helo there
I have a Motorola Fire Xt 530, I had rooted it and it was going on fine back then, until one day I realized that I cannot connect the phone by using the USB, in the computer it keeps on saying USB not recognized, and on the phone it's only charging and no option for usb mass storage. I had installed the Motorola device manager for the driver and had tried on a different computer. I had tried to to flash mode by pressing the power button plus the volume down key and camera button, and the same thing still happened, the computer doesn't recognize it. I had also checked the enable debug.
What can I do to fix it since I want to flash the Ice Cream Jelly rom, since it's not recognized i cannot flash it to the computer.
Thank you for your help in advance
Cheers
benzyboy said:
Helo there
I have a Motorola Fire Xt 530, I had rooted it and it was going on fine back then, until one day I realized that I cannot connect the phone by using the USB, in the computer it keeps on saying USB not recognized, and on the phone it's only charging and no option for usb mass storage. I had installed the Motorola device manager for the driver and had tried on a different computer. I had tried to to flash mode by pressing the power button plus the volume down key and camera button, and the same thing still happened, the computer doesn't recognize it. I had also checked the enable debug.
What can I do to fix it since I want to flash the Ice Cream Jelly rom, since it's not recognized i cannot flash it to the computer.
Thank you for your help in advance
Cheers
Click to expand...
Click to collapse
use a different usb cabe and port on computer
Hi thanks for the reply
I had tried using 3 different cables in different computers also, and they all say the same thing, usb device not recognized. The funny thing is I can use the motorola cable to connect my nexus 7 to the computer, but it cannot connect the motorola fire xt. Is there a possibility that the phone system's is damaged? If so how can it be fixed?
Thanks
MOKHD said:
use a different usb cabe and port on computer
Click to expand...
Click to collapse
Anyone can help me?
Thanks
I just inherited a US Verizon Xoom 4G LTE + WiFi that was apparently bricked a while back. It was running Android 4, but not 4.1 or 4.2. They weren't sure which exact version, just that it was pre 4.1. It was originally a 3G+WiFI and was sent in for the 4G LTE upgrade a while back. When you power it on, it stops at the Red M logo. I have no idea what was attempted before but hope someone here can help me at least get it back to stock. For reference, I am using a Windows 8 PC. I do have the Motorola drivers installed and the Android SDK installed to C:\SDK-Tools.
If I hold Volume Up and Power, it reboots and says "Starting RSD protocol support 3. Onewire: Charger is not connected or battery is not being charged... Battery charge Level: 100% (the charger is plugged in, btw). I have it connected to the pc via the oem usb cable. When I plug the cable in, windows recognizes the device and device manager shows and Motorola USB Device->Motorola Flash Device is connected. I installed RDS Lite v5.6.4 (also tried 5.7. Haven't found anything newer) and ran it as Adminitrator but it does not show anything in device properties when I click Show Device no matter which port I select. If I reboot (Power + Vol up) then immediately press Vol up when the Red M shows, it boots into fastboot mode (Starting Fastboot protocol support is displayed). If I run fastboot devices from the command line, the device and id is listed. So I know that windows can see it. ADB commands also appear to work when I let it boot normally and it sticks at the Red M.
Any idea why RSD Lite would not be able to connect to the device? I have downloaded this firmware - VZW_MZ602_signed_IMM76L_signed_vzw_MDM6600_03.1A.6 5_signed_usr_LTEDC_U_07.1F.00.combo.sbf\VZW_MZ602_ signed_IMM76L_signed_vzw_MDM6600_03.1A.65_signed_u sr_LTEDC_U_07.1F.00.combo.sbf in the hopes of restoring it with RSD Lite, but of course I cannot get it to connect.
My ultimate intention is to get some rom with at least android 4.1, possibly 4.2, installed so I can test some apps we use at work. Thanks in advance for any help.
Ok, so I figured this out. I did not realize RSD Lite would not work with USB 3.0 ports. That was all I had open on my computer so plugged in there. Unhooked another device, plugged into a USB 2.0 port in the device was instantly recognized. I was able to push the image and all booted back up fine, on Android 4.0.4.
Now I am off to find how to put CM 10.1 on here.....unless someone knows a simple way to do that
Can anyone please help. im stuck in a difficult problem. I cant enter recovery, my phone just loops, and i cant connect it to my pc. Just getting USB device not recognized. The last usb device you connected to this computer malfunctioned, and windows does not recognize it. I dont know how to add a new software or restore a backup, and i got a seious battery drain issue. Hope someone can help me. Im on Slim X rom on a E6653.
Download a MM, LP or Nougat firmware.
Let the phone charge and go to flashtool
Load the firmware you downloaded check all the wipe section case and put your phone on flashmode (vol - and stick USB cable while maintaining vol -)
Let flashtool do it's work and once done it should be OK
I have tried that, but my computer cant fin my phone, so i cant use flashtool
I found out of it. Had a faulty usb cord. Im happy again.
Hehe no problem
I have an moto c plus 4g xt1725 with android 7.0 and 4k
My phone dont turn on, stuck on bootloader, the recovery works well but my pc dont detect my phone
Already installed al drivers, updated sp flash tool, i dont know what more i need to do
Already tryied connect without battery, with it, pressing vol+, vol-, vo+ + vol-, all buttons
please help!
i buyed and new usb cable and with it dont work too
Help please