Database Info

[Q] Samsung Galaxy Note 10.1 Boot Loop

Hi Guys.
I really hope someone can help me. I'm kind of a newbie at this so please excuse if I don't use the correct terminology or something.
My Dad's Samsung Galaxy Note 10.1 has been rooted a few months ago and everything worked completely fine. Then about 2 months ago, it restarted randomly. (This was entirely random) Then something went wrong and the device would not boot at all.
It's a Samsung Galaxy Note 10.1 GT-N8000
So I tried flashing it with the factory firmware with no luck. (after this the white noise/static screen appeared)
I sent it in for repairs and they said it was a faulty battery and overcharged me to repair it. So I rejected their quotation and replaced the battery myself for a quarter of the price.
Unfortunately this did not fix the problem.
When turned on it shows a white noise screen(I hope that makes sense) and then shows the samsung logo after a few seconds. It will then restart and continue this cycle until I disconnect the battery or it runs out of power.
I'm almost completely certain that it is a software related issue. I'm thinking the firmware got corrupted somehow.
Can someone please refer me to a guide to completely flash the device so that there is no firmware on the device at all, and then flash it with either a custom firmware or the original samsung firmware.
Or if you guys know of an alternative fix please let me know!
PS. I can access the recovery mode (pressing the power & volume button).
I have uploaded a video to youtube showing exactly what it does.

Use Odin to reflash the latest firmware for the device, then boot into recovery and do a factory reset to wipe cash, data and dalvik. It should boot after that if it is a software issue.
Sent from my GT-N8013 using Tapatalk

Also, providing the link to the youtube video would help

N8000 loop
Hi everybody!
I've got the same problem. I installed a 4.4.2 rom a couple of months ago. Everything got well, no problems, no loop, no random restart.
Suddenly, while I was NOT using the tablet, it started to reboot.
I tried everything but I can only access in download mode.
With Odin it writes than was not possible to complete write.
What can I do?
Please, help me if you have any idea!
Thanks
Alberto

AlbertWolf said:
Hi everybody!
I've got the same problem. I installed a 4.4.2 rom a couple of months ago. Everything got well, no problems, no loop, no random restart.
Suddenly, while I was NOT using the tablet, it started to reboot.
I tried everything but I can only access in download mode.
With Odin it writes than was not possible to complete write.
What can I do?
Please, help me if you have any idea!
Thanks
Alberto
Click to expand...
Click to collapse
i am having the same problem...any progress ?

same problem here
Hi, I have the same problem. It started today, I wasn't using the tablet at all. I have GT-N8000 with German KitKat rooted. As the tablet boots ,at the samsung logo it freezes and restarts. I can access the download mode but not the CWM recovery. Im gonna try to flash again the CWM via the Download mode. Will see.... how about you guys ? Did you resolve the issue ?
thanks Gabriel
---------- Post added at 10:10 PM ---------- Previous post was at 09:17 PM ----------
Itried to FLASH CWM .... - result = Operation FAILED
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.41.6-n8000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

stock JB rom with PIT files FAILED !
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMF1_N8000OXXCMF1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
[B]<ID:0/009> Set PIT file..[/B]
<ID:0/009> DO NOT TURN OFF TARGET!!
[B]<ID:0/009> FAIL![/B]
<ID:0/009>
[B]<ID:0/009> Re-Partition operation failed.[/B]
<OSM> All threads completed. (succeed 0 / failed 1)

same here GT-N8000
after searching I re-flash with the Icecream Sandwitch Stock rom , this stopped the boat loop
but as I wipe everthing to factory reset, It seems that I lost the EFS folder
I tried all the ways adviced at the net...
end up with the factory mode(yellow text on screen....
no efs backup and don't know what to do.
pls pls help

same for me N8000 in bootloop cannot pass throught samsung logo and cannot enter in recovery just can enter in download mode :crying:

My wife's Note 10.1 does the same thing. Boot loop, Only thing I can reach is download mode. It won't boot past the Samsung Logo.
This Note is stock, it has never been flashed. My wife hasn't used it for a couple of weeks and now it's in this state.
Anyone?

Same here n8000 samsung bootloop, but i can acess recovery and downloaf mode, i reflashed stock kitkat and custom rom but nothing changed. Can i install ics rom? The last was kitkat.

Tried loading a couple of stock roms through Odin. They work every time. Odin declares it a success. But it still won't boot.
When I check the re-partition it fails at once. Doesn't do anything. Just fails.
I think it's time for an iPad.

I think it too bro....

boot loop Stock rom, no root.
boot to samsung logo and stuck. boot only to download mode. no recovery
HEEEEELP
-r-

sell the parts , your mobo is toast or try to replace the emmc chip on the board by someone...

gabiX87 said:
sell the parts , your mobo is toast or try to replace the emmc chip on the board by someone...
Click to expand...
Click to collapse
can we replace this part manually?

boozecraze said:
can we replace this part manually?
Click to expand...
Click to collapse
No the EMMC chip is soldered onto the board. It needs attention of a specialist.
here is my damaged board =
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It's so discouraging... I've been looking for an answer to this same problem all weekend, and was so hopeful after reading and learning about all these different problems solved, and such brilliant minds tweaking their stuff for fun, there seems to be no answer to this problem of the re-boot loop. I used to think Samsung was the best, but now I've lost all faith...

exactly the same problem since this morning when my son was about to watch his favorite videos on youtube and turn on the note, it just stuck in the samsung logo,,,, cannot go to recovery, only download mode
#shouldgetipad?

Same issue here. The battery was completely drained so I charge it overnight and found Samsung boot logo in the morning. I tried to flash UAE stock ROM and it failed as it found no partition. I tried again with PIT file found in http://forum.xda-developers.com/showthread.php?t=2268735 and tried again but still fail:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNF2_N8000OJVDNF3_N8000XXUDNF1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any luck anyone?
Thanks.

[Q] Rooting Galaxy Tab 10.1 Gone Wrong

I have followed many tutorials to the T and I have flashed with philz_touch_6.55.0-p5110 and GT-P5110_ClockworkMod-Recovery_6.0.1.0 to absouetely no avail whatsoever.
My counter is up to 15 and when I go into the recovery mode I get the default. I cannot for the life of me get the tablet to launch the recovery screens.
I have been at this for 4hours. I cant even update the device as it says the device altered. It also show custom , yet I CANNOT load the recovery other than the default.
What am I missing?
Android 4.2.2
Table: GT-P5113
More details:
From ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin both 3.5 and 1.85 I tried. Both say pass. I am completely and totally frustrated.

kjsphoto said:
I have followed many tutorials to the T and I have flashed with philz_touch_6.55.0-p5110 and GT-P5110_ClockworkMod-Recovery_6.0.1.0 to absouetely no avail whatsoever.
My counter is up to 15 and when I go into the recovery mode I get the default. I cannot for the life of me get the tablet to launch the recovery screens.
I have been at this for 4hours. I cant even update the device as it says the device altered. It also show custom , yet I CANNOT load the recovery other than the default.
What am I missing?
Android 4.2.2
Table: GT-P5113
More details:
From ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Odin both 3.5 and 1.85 I tried. Both say pass. I am completely and totally frustrated.
Click to expand...
Click to collapse
Flash recovery in Odin again but this time with auto reboot UNCHECKED. After it flashes, wait 10 seconds, unplug tablet, and boot into recovery (hold in combo until you see recovery screen. It will exit download mode.) Wipe cache and Dalvik and reboot. I'd recommend flashing @Android-Andi's TWRP for a good touch based recovery.
Sent from my SGH-T989

jrc2 said:
Flash recovery in Odin again but this time with auto reboot UNCHECKED. After it flashes, wait 10 seconds, unplug tablet, and boot into recovery (hold in combo until you see recovery screen. It will exit download mode.) Wipe cache and Dalvik and reboot. I'd recommend flashing @Android-Andi's TWRP for a good touch based recovery.
Sent from my SGH-T989
Click to expand...
Click to collapse
Thank you very much! Once I unchceked the re-boot and then rebooted holding down the key it worked!
I am not sure what you mean by the TWRP flash?
Again, thank you very much for y our help..
Kindest Regards...

kjsphoto said:
Thank you very much! Once I unchceked the re-boot and then rebooted holding down the key it worked!
I am not sure what you mean by the TWRP flash?
Again, thank you very much for y our help..
Kindest Regards...
Click to expand...
Click to collapse
TWRP is another recovery. @Android-Andi has a recovery thread in the development section. If you go to his download page, there is a .zip and a .tar file. The .tar is for Odin and the .zip is if you want to flash it in your current recovery. You just choose one file and flash it accordingly.
Sent from my SGH-T989

Galaxy S6 ( SM-G920F) 5.1.1: Softbricked After Flashing Kernel

[Q] Soft brick S6 ( SM-G920F) 5.1.1.
Tried to flash it with S6_UniKernel_v8-0002-ODIN, cf-autoroot, and it did only say pass and the phone started to reboot but it didnt get pass the logo part. So I tried to go back to stock firmware, and it only got fail so I tried with 5.0.2 instead and that didnt work either. Both case gave me this kind of error.
The firmware was from sammobile.
I didnt saw OEM in "Developer options" hope that I didnt miss it, but some post did say some phone have bootloader unlocked at start, so it should be noproblem to flash the phone. But it didnt work out for me so well.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

KFelix said:
.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.

cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.

Calnyx said:
cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.
Click to expand...
Click to collapse
I tried to connect phone with Kies, nothing happend, just "connecting.." what can I do?
Tried flashing kernel alot of times, same problem .
Just re-read his post, one small problem, the box i have is a bit damage and i can't find the S/N , is there any chance I can get the S/N , I have the ART code and some numbers under a bar but wasn't the S/N with numbers and chars?
Thanks for the help

Can't find the S/N on my box due to damage , is there other way? Do they still have the S/N inprinted under the battery? And when I'am in Odin "Binary : Custom , System : Official , Knox : 1" So it did someone "half-rooted" it or something but I have tried to reflash unikernel v8 still the same problem, is there any way to fix it without going back to the latest stable firmware with the S/N in Kies?

first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider

Ghostrider said:
first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider
Click to expand...
Click to collapse
Wow, dont know what to say but this did WORK , didn't know that I could open TWRP, because I tried to go to recovery mode but the phone didn't react so I just thought it was messed up. Thanks friend.

you're Welcome
good to hear it Worked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

SOLVED - Bricked/stuck on Smart Switch error screen

Samsung S7 (unlocked) (UK) SM-G930F
Hi
I don't know really where to start but I can tell you where I've ended up.
I tried to install Resurrection and after I went through it all it has just ended up with Odin failing.
I then thought I would try to reinstall the stock from Sam's mobile and following that I'm ending up with still a fail and also smart switch software message remaining on the screen.
These are the files from Sam's mobile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The message left on my screen after Odin's flash
Code:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 8, BINARY: 2
and odins error log
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4262 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

TokyoElbow said:
Hi
I don't know really where to start but I can tell you where I've ended up.
I tried to install Resurrection and after I went through it all it has just ended up with Odin failing.
I then thought I would try to reinstall the stock from Sam's mobile and following that I'm ending up with still a fail and also smart switch software message remaining on the screen.
These are the files from Sam's mobile
The message left on my screen after Odin's flash
and odins error log
Click to expand...
Click to collapse
The firmware you are trying to flash is older then what is already on the device. You need the correct version 8 firmware to flash with Odin.

cooltt said:
The firmware you are trying to flash is older then what is already on the device. You need the correct version 8 firmware to flash with Odin.
Click to expand...
Click to collapse
Thanks for the reply,
I searched for the youngest firmware for a UK phone and now its working, so thanks for the heads up.

TokyoElbow said:
Thanks for the reply,
is there anyway I can find out what firmware should go on this device?
Click to expand...
Click to collapse
The firmware you've posted is an old unbranded France yes?
This is the latest version of that firmware https://www.sammobile.com/samsung/galaxy-s7/firmware/SM-G930F/XEF/download/G930FXXS8ETC2/327936
If you know how to use Samfirm tool you can download it faster. The firmware code is XEF.

The firmware you've posted is an old unbranded France yes?
Click to expand...
Click to collapse
No, it was a UK firmware for the Three Network (H3G)
If you know how to use Samfirm tool you can download it faster. The firmware code is XEF.
Click to expand...
Click to collapse
Thanks, I'm not familiar with it, I'll check it out. I paid for a 30 day subscription so the download speed was ok.

TokyoElbow said:
No, it was a UK firmware for the Three Network (H3G)
Thanks, I'm not familiar with it, I'll check it out. I paid for a 30 day subscription so the download speed was ok.
Click to expand...
Click to collapse
Hey I posted the message before I saw you'd already found the right firmware so shouldn't have to do anything else now. Unbranded UK has the code BTU.
The S7 is getting on abit now so I don't think there will be any further release from veriosn 8.

cooltt said:
Hey I posted the message before I saw you'd already found the right firmware so shouldn't have to do anything else now. Unbranded UK has the code BTU.
The S7 is getting on abit now so I don't think there will be any further release from veriosn 8.
Click to expand...
Click to collapse
I think I'll grab the unbranded firmware as this one has Virgin crap all over it....(that didn't sound right at all HA HA) :laugh:
Nice one for the heads up on Samfirm, the speeds are just as quick as the paid subscription on Sam's mobile.
cheers

Failed to Update via Odin HEELP!!!!

Hi,
My Ultra n9860 (SNAPDRAGON) dont want to update via Odin stuck on SECURE CHECK FAIL : abl.
Here is the log on ODIN:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> quest.fv
<ID:0/003> testvector.fv
<ID:0/003> spunvm.bin
<ID:0/003> persist.img
<ID:0/003> userdata.img
<ID:0/003> metadata.img
<ID:0/003> dqmdbg.img
<ID:0/003> misc.bin
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 8416 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Odin version?
Cable used?

fizzingbees said:
Odin version?
Cable used?
Click to expand...
Click to collapse
Odin3_v3.14.4
Cable OEM XIAOMI

ShortyPG said:
Odin3_v3.14.4
Cable OEM XIAOMI
Click to expand...
Click to collapse
-Try with 3.13.3B
Odin v3.13.1_3B_PatcheD.zip | Tool by Rydah for Utilities
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
-Use Samsung original cable
-Change ports
-Ensure integrity downloaded firmware via md5 checksum
-run odin in administrative mode

fizzingbees said:
-Try with 3.13.3B
Odin v3.13.1_3B_PatcheD.zip | Tool by Rydah for Utilities
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
-Use Samsung original cable
-Change ports
-Ensure integrity downloaded firmware via md5 checksum
-run odin in administrative mode
Click to expand...
Click to collapse
Sorry for the late reply,
Nope the phone still on SECURE CHECK FAILURE : abl

ShortyPG said:
Sorry for the late reply,
Nope the phone still on SECURE CHECK FAILURE : abl
Click to expand...
Click to collapse
Are you trying to flash stock firmware or custom firmware/file?
Is usb debugging turned on in phone

fizzingbees said:
Are you trying to flash stock firmware or custom firmware/file?
Is usb debugging turned on in phone
Click to expand...
Click to collapse
Yes stock firmware.
The phone rebooted in BootLoader fail mode. Is not usabile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

What firmware is the phone currently on. And which firmware did you download to flash via odin

ShortyPG said:
Yes stock firmware.
The phone rebooted in BootLoader fail mode. Is not usabile.View attachment 5439495
Click to expand...
Click to collapse
are you rebooting the device back into recovery after getting bootloader failed?

Tonyy1206 said:
are you rebooting the device back into recovery after getting bootloader failed?
Click to expand...
Click to collapse
Is the only thing i can do

Tonyy1206 said:
What firmware is the phone currently on. And which firmware did you download to flash via odin
Click to expand...
Click to collapse
N9860ZSS2DUI1, and i tre with the same and an update.

ShortyPG said:
N9860ZSS2DUI1, and i tre with the same and an update.
Click to expand...
Click to collapse
Did you try N9860ZSS2DUI3? Another thing would be your PC or laptop not supporting USB C To C cable and might need to use USB A to C cable.

Yes I tried. And I used an OEM Xiaomi cable

This error on top, what does it say?

If odin is continuous causing problem, install Samsung smart switch and use emergency device recovery option to get the phone boot up.
Tell me can you manually boot to download mode ?

fizzingbees said:
If odin is continuous causing problem, install Samsung smart switch and use emergency device recovery option to get the phone boot up.
Tell me can you manually boot to download mode ?
Click to expand...
Click to collapse
SmartSwitch ask me previous computer code and obviously I don't have.
1 month ago work's perfectly, what's going on.
Yes is the only thing I can do...

fizzingbees said:
This error on top, what does it say?
Click to expand...
Click to collapse
"partition boot reason boot hash of data does not "
I'm going to make a better photo.

ShortyPG said:
SmartSwitch ask me previous computer code and obviously I don't have.
1 month ago work's perfectly, what's going on.
Yes is the only thing I can do...
Click to expand...
Click to collapse
Computer password?
Or phone password?

ShortyPG said:
"partition boot reason boot hash of data does not "
I'm going to make a better photo.
Click to expand...
Click to collapse
Yes, do tell us what's this error about

fizzingbees said:
Yes, do tell us what's this error about
Click to expand...
Click to collapse
Ok I'm doing