Database Info

Galaxy S6 ( SM-G920F) 5.1.1: Softbricked After Flashing Kernel

[Q] Soft brick S6 ( SM-G920F) 5.1.1.
Tried to flash it with S6_UniKernel_v8-0002-ODIN, cf-autoroot, and it did only say pass and the phone started to reboot but it didnt get pass the logo part. So I tried to go back to stock firmware, and it only got fail so I tried with 5.0.2 instead and that didnt work either. Both case gave me this kind of error.
The firmware was from sammobile.
I didnt saw OEM in "Developer options" hope that I didnt miss it, but some post did say some phone have bootloader unlocked at start, so it should be noproblem to flash the phone. But it didnt work out for me so well.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

KFelix said:
.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.

cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.

Calnyx said:
cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.
Click to expand...
Click to collapse
I tried to connect phone with Kies, nothing happend, just "connecting.." what can I do?
Tried flashing kernel alot of times, same problem .
Just re-read his post, one small problem, the box i have is a bit damage and i can't find the S/N , is there any chance I can get the S/N , I have the ART code and some numbers under a bar but wasn't the S/N with numbers and chars?
Thanks for the help

Can't find the S/N on my box due to damage , is there other way? Do they still have the S/N inprinted under the battery? And when I'am in Odin "Binary : Custom , System : Official , Knox : 1" So it did someone "half-rooted" it or something but I have tried to reflash unikernel v8 still the same problem, is there any way to fix it without going back to the latest stable firmware with the S/N in Kies?

first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider

Ghostrider said:
first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider
Click to expand...
Click to collapse
Wow, dont know what to say but this did WORK , didn't know that I could open TWRP, because I tried to go to recovery mode but the phone didn't react so I just thought it was messed up. Thanks friend.

you're Welcome
good to hear it Worked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

S6 Samsung Logo, Black Screen Blue LED (G920AUCS5DPI1)

Hey all,
Longtime follower, first post (I think).
I have a non-rooted (never-rooted, I believe) Samsung Galaxy S6 (GM-G920A) that would boot to the AT&T logo and hang on a black screen with blue LED forever.
I was unable to resolve, so I decided to update to latest firmware (G920AUCS5DPI1) and now am unable to even get past the Samsung boot logo. I have scoured the forums, google, and YouTube, but have been unable to resolve.
(Note: The firmware was pushed OTA, but I was able to find it a website called galaxys6edgeupdate, since I couldn't find it on here or sammobile)
Some details about the firmware...
G920AUCS5DPI1
Android version: 6.0.1
Security patch level: September 1, 2016
Baseband version: G920AUCS5DPI1
Kernel version: 3.10.61-8851614
Build number: MMB29K.G920AUCS5DPI1
Release date: September 30, 2016
My download screen currently reads...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This was the ODIN completion screenshot...
The log reads...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> userdata.img
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The phone rebooted and brought up the Recovery mode and showed "Installing system update..." immediately following the flash and then proceeded to hang on the Samsung logo. I forced a reboot with the HOME and VOL DOWN, then entered the Recovery mode.
The Recovery mode shows the the dm-verity verification failed...
I have tried the reboot system now, reboot to bootloader, wipe cache partition, and wipe data/factory reset options, but still haven't gotten anywhere.
Additionally, attempted the Samsung Kies and Kies 3 software. The Kies software says my model is not supported. Kies 3 appears to work initially, but after accepting my model number and entering my serial number, it asks me to check my model number and does not accept it.
Any ideas?

Can you send me the firmware?
Can you send me the firmware? PLEASE? [email protected]

asdvender said:
Any ideas?
Click to expand...
Click to collapse
Use Samsung Smart Switch.

I'd have suggested smart switch too!
Sent from my SM-G920F using Tapatalk

G920F Boot stuck

Good afternoon. I have next situation - my phone stucks on the label of "Samsung Galaxy s6". I can't enter to recovery mode, only to downloading mode. When flashing rom via odin everything passes without errors, but the phone does not boot further "Samsung Galaxy s6". If i turn it off and connect to charger it shows the same inscription but does not indicate charging. This rom was flashing by odin G920FXXU5DQA8_G920FOXE5DQA3_G920FXXU5DPL3_HOME.tar.md5 but nothing did not help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi,
Have you tried flashing a custom recovery and booting to it? Maybe something is broken and you may need to wipe the partition...
All the best,
~Lord
Sent from my Galaxy S7 Edge (SM-935F) using Tapatalk Beta

I have tried to flash but received message "recovery is not seandroid enforcing"

I just flashed twrp, but i can not enter to recovery mode.

Odin log is
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!

just flash cf auto root for your model

flyinginthedreams said:
I have tried to flash but received message "recovery is not seandroid enforcing"
Click to expand...
Click to collapse
My Samsung S4 Value Edition also stucked for months. I used original charger to charge and power on. It worked and it is working till now. I kept that mobile for around 1 year. Tried all of my best thing i could do. Later on the charger was the problem.

i did, the same result
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
and now have message " Recovery is not seandroid enforsing"

flyinginthedreams said:
i did, the same result
and now have message " Recovery is not seandroid enforsing"
Click to expand...
Click to collapse
Ok, but is it still stuck on logo while booting?
As for the message you can ignore it, same as kernel is not seandriod enforcing while booting.
If you want not to have these messages, run emergency initialization via Smart Switch, you can check my topics, made instructions with screenshots on how to use it to flash stock fw and stock recovery, but if DRK is messed up it will still be stuck on logo with official fw.
What I would do if I were you is:
1. run emergency initialization via Smart Switch - this will make phone stock, but like I said above it will be stuck on logo, because DM verity would fail if DRK is messed up.
2. flash cf auto root via Odin - custom kernel which bypass DM verity check - nevermind the seandroid enforcing messages, they are normal.
At this point you should have a bootable rooted phone with stock fw and stock recovery.

brenner650 said:
Ok, but is it still stuck on logo while booting?
As for the message you can ignore it, same as kernel is not seandriod enforcing while booting.
If you want not to have these messages, run emergency initialization via Smart Switch, you can check my topics, made instructions with screenshots on how to use it to flash stock fw and stock recovery, but if DRK is messed up it will still be stuck on logo with official fw.
Click to expand...
Click to collapse
Yes, nothing did not change. Same logo

flyinginthedreams said:
Yes, nothing did not change. Same logo
Click to expand...
Click to collapse
even with cf autoroot flashed afterwards?

brenner650 said:
even with cf autoroot flashed afterwards?
Click to expand...
Click to collapse
yes

That is weird, maybe try any other kernel, or flash full fw with corresponding pit, but it looks like hw to me

brenner650 said:
That is weird, maybe try any other kernel, or flash full fw with corresponding pit, but it looks like hw to me
Click to expand...
Click to collapse
when i try to flash anything i receive every time that
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!

flyinginthedreams said:
when i try to flash anything i receive every time that
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Click to expand...
Click to collapse
It looks like it has been flashed successfully.
Is it the same with Smart Switch emergency initialization with sn of the phone, and flashing custom kernel afterwards?

I had the same problem.
In the laboratory they told me that my processor has been burned...
Sent from my Redmi 3S using Tapatalk

help

Phone : Samsung Galaxy S6 Edge +
Model Name : SM-G928C
Phone Country : United Arab Emirates
Product Code : XSG
PDA : QA5
What happened? : my mother always turning off the phone if she's not using it so there's a running update on this phone then she turn off the phone while updating (note she's not techy so she didnt know what she was doing) so thats why.
(this phone is not rooted)
What i do : the first i tried to fix this phone is download any firmware that i see in sammobile on g928c then my phone turn to blue screen and a message "an error has occurred while updating the device software use the emergency recovery function in the smart switch pc software", Then i tried the smart switch i press MORE>EMERGENCY SOFTWARE RECOVERY AND INSTALLATION>DEVICE INITIALIZATION> i entered model name and my s/n number then > ok > set up my phone in to download mode then click okay and wait to finish the installation then after that my phone back to samsung logo boot loop now i tried to install the main firmware i see in smartswitch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i downloaded it in sammobile and used it in odin but the results is the same bootloop on samsung logo and i tried odin v3.09, odin3_v3.10.6, odin3_v3.10.7 and the latest 12.3 its just the same issue (note: i tried samsung kies too but its just the same on smartswitch)
Main Problem :
- Stuck on samsung logo / Boot loop on samsung logo
- can't enter to recovery mode
- FRP LOCK : On
any solution for this?

Read https://forum.xda-developers.com/showpost.php?p=71478246&postcount=3

dinamo1975 said:
Read https://forum.xda-developers.com/showpost.php?p=71478246&postcount=3
Click to expand...
Click to collapse
is it required the custom rom for me? its on the steps on the thread you gave

chibisan14 said:
is it required the custom rom for me? its on the steps on the thread you gave
Click to expand...
Click to collapse
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.

dinamo1975 said:
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.
Click to expand...
Click to collapse
i tried but the odin error, cant enter to settings to change the frp lock only download mode i can access
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

chibisan14 said:
i tried but the odin error, cant enter to settings to change the frp lock only download mode i can access
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
thx to @forumber2
You must follow this procedure:
1. Download this program LINK
2. Extract it to a new folder and open it
3. Enter the parameters like attached picture (1) and wait to download the firmware
4. Extract the firmware (use winrar/winzip/ 7zip) in a new folder and you will have 4 files like attached picture (2)
5. Open Odin and put these 4 file accordingly in Odin (BL to BL, AP to AP, CP to CP, CSC to CSC) like attached picture (3) and flash them (press START).

is there any other link you provided to download that 2088 MB because its always interrupted and make me download it again from the start using samfirm

chibisan14 said:
is there any other link you provided to download that 2088 MB because its always interrupted and make me download it again from the start using samfirm
Click to expand...
Click to collapse
SamFirm program himself make the download!

dinamo1975 said:
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.
Click to expand...
Click to collapse
dinamo1975 said:
thx to @forumber2
You must follow this procedure:
1. Download this program LINK
2. Extract it to a new folder and open it
3. Enter the parameters like attached picture (1) and wait to download the firmware
4. Extract the firmware (use winrar/winzip/ 7zip) in a new folder and you will have 4 files like attached picture (2)
5. Open Odin and put these 4 file accordingly in Odin (BL to BL, AP to AP, CP to CP, CSC to CSC) like attached picture (3) and flash them (press START).
Click to expand...
Click to collapse
dinamo1975 said:
SamFirm program inself make the download!
Click to expand...
Click to collapse
Checking CRC32...
Error: CRC does not match. Please redownload the file.
thats why i redownload it again and start to 1% but thanks trying to download it again

Checking CRC32...
Error: CRC does not match. Please redownload the file.
downloading again for the 4th time

chibisan14 said:
Checking CRC32...
Error: CRC does not match. Please redownload the file.
downloading again for the 4th time
Click to expand...
Click to collapse
Download from HERE

dinamo1975 said:
Download from HERE
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> userdata.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
i passed the odin but still the same issue stuck on samsung logo boot loop

chibisan14 said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> userdata.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
i passed the odin but still the same issue stuck on samsung logo boot loop
Click to expand...
Click to collapse
After you done this procedure, extract hidden.img from CSC file, rename it to hidden.img.tar, enter in Downloading Mode and flash it in AP on Odin.
After reboot, wait cca 10 - 15min!

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
done and still not working

any solution for this?

Manual enter to recovery and perform wipe data.
Reboot and wait few minutes afterwards

punktnet said:
Manual enter to recovery and perform wipe data.
Reboot and wait few minutes afterwards
Click to expand...
Click to collapse
can't enter to recovery (vol up + home + power) only download mode and samsung logo bootloop only i can access

chibisan14 said:
done and still not working
Click to expand...
Click to collapse
After you flash "hidden.img.tar" Odin says "PASS" and your phone reboot?
Note that, hidden.img.tar must be rename it by changing the file extension! Is not just an "usual rename" !
Try again the whole procedure.
Otherwise, read this: https://forum.xda-developers.com/s6-edge-plus/help/samsung-galaxy-s6-edge-sm-g928c-twrp-t3192532

dinamo1975 said:
After you flash "hidden.img.tar" Odin says "PASS" and your phone reboot?
Note that, hidden.img.tar must be rename it by changing the file extension! Is not just an "usual rename" !
Try again the whole procedure.
Otherwise, read this: https://forum.xda-developers.com/s6-edge-plus/help/samsung-galaxy-s6-edge-sm-g928c-twrp-t3192532
Click to expand...
Click to collapse
yes it's says pass and phone reboot then coming to boot loop again
yes i change the file extension using 7-zip to tar
tried the link you gaved but its fail got the same issue again "Custom Binary(RECOVERy) blocked by frp lock" in download mode i guess i cant flash twrp recovery anymore because of the frp is on.
is there a solution to off the recovery in download mode?

I think you should try reflash a new image with PIT file from the beginning. Mind you should use a new version with same bootloader as your previous one. Different bootloaders won't install.

Problem with Odin Updating firmware

Hey guys
I did the update from marshmallow to nougat on my J7 Prime G610F
But I found any problems in the process:
I tried update the nougat via Odin and appear an error for me about Pit file.
So I watched a video that a guy was using miracle to get pit file, but I didn't know what the miracle was. So I repeated the process that the guy did and my cellphone was updated to nougat( video)
But I think something is wrong, since the firmware file comes with 5 files and I used only one and my cellphone was update to nougat
Now I'm trying to use Odin to update the other files and I can't. I've already tried to use PIT file from backup that the miracle did, unsucessfully. Pit file from the CSC file on firmware folder, same thing. I downloaded some pit files from sammobile site, same thing.
here are some bugs that have been returned to me
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
I tried remove the pit file from csc and update, selecting an external pit file. Unsucessfull every time.
This was a firmware I used: ROM 1_G610FDDU1BQH9_INDIA_7.0
Cell phone is working so far, showed no error.
In Phone INFO:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
I downloaded another version of firmware, from sammobile.
G610FXXU1BRB4_G610FODI1BRB4_INS.zip - India
But I'll wait for someone to give me a hand to proceed.
Sorry for my bad english.
I'm grateful already.

I downloaded another version of firmware, from sammobile.
G610FXXU1BRB4_G610FODI1BRB4_INS.zip - India
But I'll wait for someone to give me a hand to proceed.
Click to expand...
Click to collapse
I got flash the AP and HOME CSC, but I can't flash BL and CP (including my 4g is not working, because that, i think)
I noticed that there are different models 610f and 610f / ds (my model). Can this be the problem? if that's the problem, where can I find the rom for my model?

Maybe I can't help you that much but I only know you must flash the right .pit file with the stock rom. I did this on my SM-J700F and everything worked, before that my phone was dead for me. Just Google your phone models pit file, finding that file wasn't easy for me but I found it. You can also use SamFirm, a tool that I found in XDA. You can download your stock ROM (for Samsung) with fullspeed, and it is also reliable. The STOCK ROM should everytime work right with the right STOCK ROM file and the right PIT file. I found that link on the internet I can't guarantee it's the right one. You can also Google it yourself from a reliable resource. But I don't think it's wrong.
The PIT File----dosya.co/0zv84005icrk/SM-G610F_7-4-2017_10-0-3.pit.html
If you are using a Custom ROM read this:
And I had another problem, the ROM didn't even recognize my SIM card. there is actually nothing much to do. I heard much about methods. Some say if you are using something like Cyanogenmod or LineageOS try disabling System profiles, or take a backup of your stock ROM's Radio and EFS and restore them in your new ROM. Nothing worked for me. My ROM's developer published a new version of the ROM and that solved it. But If you are not good enough to edit the ROM then there is not something I think you can do.
I hope I solved your problem...