Database Info

[Q] Rooting Galaxy Tab 10.1 Gone Wrong

I have followed many tutorials to the T and I have flashed with philz_touch_6.55.0-p5110 and GT-P5110_ClockworkMod-Recovery_6.0.1.0 to absouetely no avail whatsoever.
My counter is up to 15 and when I go into the recovery mode I get the default. I cannot for the life of me get the tablet to launch the recovery screens.
I have been at this for 4hours. I cant even update the device as it says the device altered. It also show custom , yet I CANNOT load the recovery other than the default.
What am I missing?
Android 4.2.2
Table: GT-P5113
More details:
From ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin both 3.5 and 1.85 I tried. Both say pass. I am completely and totally frustrated.

kjsphoto said:
I have followed many tutorials to the T and I have flashed with philz_touch_6.55.0-p5110 and GT-P5110_ClockworkMod-Recovery_6.0.1.0 to absouetely no avail whatsoever.
My counter is up to 15 and when I go into the recovery mode I get the default. I cannot for the life of me get the tablet to launch the recovery screens.
I have been at this for 4hours. I cant even update the device as it says the device altered. It also show custom , yet I CANNOT load the recovery other than the default.
What am I missing?
Android 4.2.2
Table: GT-P5113
More details:
From ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Odin both 3.5 and 1.85 I tried. Both say pass. I am completely and totally frustrated.
Click to expand...
Click to collapse
Flash recovery in Odin again but this time with auto reboot UNCHECKED. After it flashes, wait 10 seconds, unplug tablet, and boot into recovery (hold in combo until you see recovery screen. It will exit download mode.) Wipe cache and Dalvik and reboot. I'd recommend flashing @Android-Andi's TWRP for a good touch based recovery.
Sent from my SGH-T989

jrc2 said:
Flash recovery in Odin again but this time with auto reboot UNCHECKED. After it flashes, wait 10 seconds, unplug tablet, and boot into recovery (hold in combo until you see recovery screen. It will exit download mode.) Wipe cache and Dalvik and reboot. I'd recommend flashing @Android-Andi's TWRP for a good touch based recovery.
Sent from my SGH-T989
Click to expand...
Click to collapse
Thank you very much! Once I unchceked the re-boot and then rebooted holding down the key it worked!
I am not sure what you mean by the TWRP flash?
Again, thank you very much for y our help..
Kindest Regards...

kjsphoto said:
Thank you very much! Once I unchceked the re-boot and then rebooted holding down the key it worked!
I am not sure what you mean by the TWRP flash?
Again, thank you very much for y our help..
Kindest Regards...
Click to expand...
Click to collapse
TWRP is another recovery. @Android-Andi has a recovery thread in the development section. If you go to his download page, there is a .zip and a .tar file. The .tar is for Odin and the .zip is if you want to flash it in your current recovery. You just choose one file and flash it accordingly.
Sent from my SGH-T989

Galaxy S6 ( SM-G920F) 5.1.1: Softbricked After Flashing Kernel

[Q] Soft brick S6 ( SM-G920F) 5.1.1.
Tried to flash it with S6_UniKernel_v8-0002-ODIN, cf-autoroot, and it did only say pass and the phone started to reboot but it didnt get pass the logo part. So I tried to go back to stock firmware, and it only got fail so I tried with 5.0.2 instead and that didnt work either. Both case gave me this kind of error.
The firmware was from sammobile.
I didnt saw OEM in "Developer options" hope that I didnt miss it, but some post did say some phone have bootloader unlocked at start, so it should be noproblem to flash the phone. But it didnt work out for me so well.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

KFelix said:
.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.

cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.

Calnyx said:
cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.
Click to expand...
Click to collapse
I tried to connect phone with Kies, nothing happend, just "connecting.." what can I do?
Tried flashing kernel alot of times, same problem .
Just re-read his post, one small problem, the box i have is a bit damage and i can't find the S/N , is there any chance I can get the S/N , I have the ART code and some numbers under a bar but wasn't the S/N with numbers and chars?
Thanks for the help

Can't find the S/N on my box due to damage , is there other way? Do they still have the S/N inprinted under the battery? And when I'am in Odin "Binary : Custom , System : Official , Knox : 1" So it did someone "half-rooted" it or something but I have tried to reflash unikernel v8 still the same problem, is there any way to fix it without going back to the latest stable firmware with the S/N in Kies?

first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider

Ghostrider said:
first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider
Click to expand...
Click to collapse
Wow, dont know what to say but this did WORK , didn't know that I could open TWRP, because I tried to go to recovery mode but the phone didn't react so I just thought it was messed up. Thanks friend.

you're Welcome
good to hear it Worked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Odin fail Error Message after step cm.bin

I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ghost_j1 said:
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
View attachment 3947891
Click to expand...
Click to collapse
Either wrong firmware or you're trying to downgrade.

ashyx said:
Either wrong firmware or you're trying to downgrade.
Click to expand...
Click to collapse
yes I am trying to downgrade from android 6.0.1 to 5.1.1 in hope to solve Wifi Problem I had posted long time ago link here

ghost_j1 said:
yes I am trying to downgrade from android 6.0.1 to 5.1.1 in hope to solve Wifi Problem I had posted long time ago link here
Click to expand...
Click to collapse
You can remove cm.bin, but you're unlikely to be able to downgrade.
If you are having issues connecting your device change the wifi channel on your router.
To much congestion on one channel can cause connection issues.
Are you attempting to connect to 2.4 or 5ghz?

ashyx said:
You can remove cm.bin, but you're unlikely to be able to downgrade.
If you are having issues connecting your device change the wifi channel on your router.
To much congestion on one channel can cause connection issues.
Are you attempting to connect to 2.4 or 5ghz?
Click to expand...
Click to collapse
I had google it how to downgrade they dont mention anything about cm.bin and if so where i can find it ?
there are two other Galaxy J7 phones which are works normally within my house
i tried to change router channel but nothing helped

ghost_j1 said:
I had google it how to downgrade they dont mention anything about cm.bin and if so where i can find it ?
there are two other Galaxy J7 phones which are works normally within my house
i tried to change router channel but nothing helped
Click to expand...
Click to collapse
It's in the stock firmware. Unpack it with 7zip, remove the file then repack to tar with 7zip.

If your j7 is upgraded to BPJ4 baseband (6.0.1) latest j700f marshmallow version, then you cannot downgrade to lollipop or any other 6.0.1 lower version using odin. Because the latest rom locks your bootloader which sets your phone to ver3. You probably get that error when you try to downgrade through odin. The only way to use lollipop is flash twrp and wipe system data and flash any custom lollipop rom. Hope this helped you.

ashyx said:
It's in the stock firmware. Unpack it with 7zip, remove the file then repack to tar with 7zip.
Click to expand...
Click to collapse
Prashanthc said:
If your j7 is upgraded to BPJ4 baseband (6.0.1) latest j700f marshmallow version, then you cannot downgrade to lollipop or any other 6.0.1 lower version using odin. Because the latest rom locks your bootloader which sets your phone to ver3. You probably get that error when you try to downgrade through odin. The only way to use lollipop is flash twrp and wipe system data and flash any custom lollipop rom. Hope this helped you.
Click to expand...
Click to collapse
Thank u both... dose that will solve my fiwi probelm coz one of stores tell me that there is a trick to solve it without downgrade but he ask for a lot to do that :S

Same Issue
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
there is nothing i can do to resolve this issue plz help urgent

aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
there is nothing i can do to resolve this issue plz help urgent
Click to expand...
Click to collapse
Incorrect firmware for your device.
Ensure it is for your devices particular region.

ashyx said:
Incorrect firmware for your device.
Ensure it is for your devices particular region.
Click to expand...
Click to collapse
The firmware is correct and also the region. That's the Issue.

aa_yas said:
The firmware is correct and also the region. That's the Issue.
Click to expand...
Click to collapse
I highly doubt it is, having been down this road many times with other members.
Please post your exact device model and a link to the firmware you are attempting to flash and if possible the current firmware your device is running.

ashyx said:
I highly doubt it is, having been down this road many times with other members.
Please post your exact device model and a link to the firmware you are attempting to flash and if possible the current firmware your device is running.
Click to expand...
Click to collapse
Hello. Few days ago after updated to latest marshmallow i decided to flash twrp n root my J7 2015 just to try a custom rom. Now I'm facing same problem when flashing to stock marshmallow or to stock lollipop. My device is J700F n my region is XID (indonesia). I've tried so many times with so many different stock roms n regions but Odin always says FAIL after cm.bin. Please help me solve this problem. I want my phone back to its original n official rom. I really appreciate for any help. Best regards. Thx n sorry for my bad english

Rahadian1981 said:
Hello. Few days ago after updated to latest marshmallow i decided to flash twrp n root my J7 2015 just to try a custom rom. Now I'm facing same problem when flashing to stock marshmallow or to stock lollipop. My device is J700F n my region is XID (indonesia). I've tried so many times with so many different stock roms n regions but Odin always says FAIL after cm.bin. Please help me solve this problem. I want my phone back to its original n official rom. I really appreciate for any help. Best regards. Thx n sorry for my bad english
Click to expand...
Click to collapse
You can either flash the correct firmware for your device region or remove cm.bin then flash.

ashyx said:
You can either flash the correct firmware for your device region or remove cm.bin then flash.
Click to expand...
Click to collapse
thx for your response. I've tried to flash the correct n official rom based by my region n by latest build number. Btw is there any side effect if that cm.bin removed?

Rahadian1981 said:
thx for your response. I've tried to flash the correct n official rom based by my region n by latest build number. Btw is there any side effect if that cm.bin removed?
Click to expand...
Click to collapse
You should be fine without cm.bin as long as the rest of the new firmware is compatible with the one already installed.

same issue
aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same issue after flash my J5 pro to the lastest Nougat firmware,cant downgrade to the before version on Nougat too...i've try so many time with different version,still same failed cm.bin
Are there anyone knows how to force downgrade or trick to solved it?? thank u
Click to expand...
Click to collapse

dwidy22 said:
aa_yas said:
Quote:
Originally Posted by ghost_j1
I am tring to flash Samsung Galaxy J7 with Odin software but I am getting fail Error message
log file attached below as image please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same issue after flash my J5 pro to the lastest Nougat firmware,cant downgrade to the before version on Nougat too...i've try so many time with different version,still same failed cm.bin
Are there anyone knows how to force downgrade or trick to solved it?? thank u
Click to expand...
Click to collapse
Either remove it, flash with flashfire with modem unchecked or use the correct firmware for your device region.
Click to expand...
Click to collapse

ashyx said:
dwidy22 said:
Either remove it, flash with flashfire with modem unchecked or use the correct firmware for your device region.
Click to expand...
Click to collapse
when i reflashing with the current firmware (lastest nougat firmware) on my device now everything is oke no ODIN failed, but when try to flashing with any other version (before version on nougat too) always failed on cm.bin
Device region and firmware absolutaly correct
Click to expand...
Click to collapse

system.img error

help

Phone : Samsung Galaxy S6 Edge +
Model Name : SM-G928C
Phone Country : United Arab Emirates
Product Code : XSG
PDA : QA5
What happened? : my mother always turning off the phone if she's not using it so there's a running update on this phone then she turn off the phone while updating (note she's not techy so she didnt know what she was doing) so thats why.
(this phone is not rooted)
What i do : the first i tried to fix this phone is download any firmware that i see in sammobile on g928c then my phone turn to blue screen and a message "an error has occurred while updating the device software use the emergency recovery function in the smart switch pc software", Then i tried the smart switch i press MORE>EMERGENCY SOFTWARE RECOVERY AND INSTALLATION>DEVICE INITIALIZATION> i entered model name and my s/n number then > ok > set up my phone in to download mode then click okay and wait to finish the installation then after that my phone back to samsung logo boot loop now i tried to install the main firmware i see in smartswitch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i downloaded it in sammobile and used it in odin but the results is the same bootloop on samsung logo and i tried odin v3.09, odin3_v3.10.6, odin3_v3.10.7 and the latest 12.3 its just the same issue (note: i tried samsung kies too but its just the same on smartswitch)
Main Problem :
- Stuck on samsung logo / Boot loop on samsung logo
- can't enter to recovery mode
- FRP LOCK : On
any solution for this?

Read https://forum.xda-developers.com/showpost.php?p=71478246&postcount=3

dinamo1975 said:
Read https://forum.xda-developers.com/showpost.php?p=71478246&postcount=3
Click to expand...
Click to collapse
is it required the custom rom for me? its on the steps on the thread you gave

chibisan14 said:
is it required the custom rom for me? its on the steps on the thread you gave
Click to expand...
Click to collapse
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.

dinamo1975 said:
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.
Click to expand...
Click to collapse
i tried but the odin error, cant enter to settings to change the frp lock only download mode i can access
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

chibisan14 said:
i tried but the odin error, cant enter to settings to change the frp lock only download mode i can access
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
thx to @forumber2
You must follow this procedure:
1. Download this program LINK
2. Extract it to a new folder and open it
3. Enter the parameters like attached picture (1) and wait to download the firmware
4. Extract the firmware (use winrar/winzip/ 7zip) in a new folder and you will have 4 files like attached picture (2)
5. Open Odin and put these 4 file accordingly in Odin (BL to BL, AP to AP, CP to CP, CSC to CSC) like attached picture (3) and flash them (press START).

is there any other link you provided to download that 2088 MB because its always interrupted and make me download it again from the start using samfirm

chibisan14 said:
is there any other link you provided to download that 2088 MB because its always interrupted and make me download it again from the start using samfirm
Click to expand...
Click to collapse
SamFirm program himself make the download!

dinamo1975 said:
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.
Click to expand...
Click to collapse
dinamo1975 said:
thx to @forumber2
You must follow this procedure:
1. Download this program LINK
2. Extract it to a new folder and open it
3. Enter the parameters like attached picture (1) and wait to download the firmware
4. Extract the firmware (use winrar/winzip/ 7zip) in a new folder and you will have 4 files like attached picture (2)
5. Open Odin and put these 4 file accordingly in Odin (BL to BL, AP to AP, CP to CP, CSC to CSC) like attached picture (3) and flash them (press START).
Click to expand...
Click to collapse
dinamo1975 said:
SamFirm program inself make the download!
Click to expand...
Click to collapse
Checking CRC32...
Error: CRC does not match. Please redownload the file.
thats why i redownload it again and start to 1% but thanks trying to download it again

Checking CRC32...
Error: CRC does not match. Please redownload the file.
downloading again for the 4th time

chibisan14 said:
Checking CRC32...
Error: CRC does not match. Please redownload the file.
downloading again for the 4th time
Click to expand...
Click to collapse
Download from HERE

dinamo1975 said:
Download from HERE
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> userdata.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
i passed the odin but still the same issue stuck on samsung logo boot loop

chibisan14 said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> userdata.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
i passed the odin but still the same issue stuck on samsung logo boot loop
Click to expand...
Click to collapse
After you done this procedure, extract hidden.img from CSC file, rename it to hidden.img.tar, enter in Downloading Mode and flash it in AP on Odin.
After reboot, wait cca 10 - 15min!

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
done and still not working

any solution for this?

Manual enter to recovery and perform wipe data.
Reboot and wait few minutes afterwards

punktnet said:
Manual enter to recovery and perform wipe data.
Reboot and wait few minutes afterwards
Click to expand...
Click to collapse
can't enter to recovery (vol up + home + power) only download mode and samsung logo bootloop only i can access

chibisan14 said:
done and still not working
Click to expand...
Click to collapse
After you flash "hidden.img.tar" Odin says "PASS" and your phone reboot?
Note that, hidden.img.tar must be rename it by changing the file extension! Is not just an "usual rename" !
Try again the whole procedure.
Otherwise, read this: https://forum.xda-developers.com/s6-edge-plus/help/samsung-galaxy-s6-edge-sm-g928c-twrp-t3192532

dinamo1975 said:
After you flash "hidden.img.tar" Odin says "PASS" and your phone reboot?
Note that, hidden.img.tar must be rename it by changing the file extension! Is not just an "usual rename" !
Try again the whole procedure.
Otherwise, read this: https://forum.xda-developers.com/s6-edge-plus/help/samsung-galaxy-s6-edge-sm-g928c-twrp-t3192532
Click to expand...
Click to collapse
yes it's says pass and phone reboot then coming to boot loop again
yes i change the file extension using 7-zip to tar
tried the link you gaved but its fail got the same issue again "Custom Binary(RECOVERy) blocked by frp lock" in download mode i guess i cant flash twrp recovery anymore because of the frp is on.
is there a solution to off the recovery in download mode?

I think you should try reflash a new image with PIT file from the beginning. Mind you should use a new version with same bootloader as your previous one. Different bootloaders won't install.

Problem with Odin Updating firmware

Hey guys
I did the update from marshmallow to nougat on my J7 Prime G610F
But I found any problems in the process:
I tried update the nougat via Odin and appear an error for me about Pit file.
So I watched a video that a guy was using miracle to get pit file, but I didn't know what the miracle was. So I repeated the process that the guy did and my cellphone was updated to nougat( video)
But I think something is wrong, since the firmware file comes with 5 files and I used only one and my cellphone was update to nougat
Now I'm trying to use Odin to update the other files and I can't. I've already tried to use PIT file from backup that the miracle did, unsucessfully. Pit file from the CSC file on firmware folder, same thing. I downloaded some pit files from sammobile site, same thing.
here are some bugs that have been returned to me
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
I tried remove the pit file from csc and update, selecting an external pit file. Unsucessfull every time.
This was a firmware I used: ROM 1_G610FDDU1BQH9_INDIA_7.0
Cell phone is working so far, showed no error.
In Phone INFO:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
I downloaded another version of firmware, from sammobile.
G610FXXU1BRB4_G610FODI1BRB4_INS.zip - India
But I'll wait for someone to give me a hand to proceed.
Sorry for my bad english.
I'm grateful already.

I downloaded another version of firmware, from sammobile.
G610FXXU1BRB4_G610FODI1BRB4_INS.zip - India
But I'll wait for someone to give me a hand to proceed.
Click to expand...
Click to collapse
I got flash the AP and HOME CSC, but I can't flash BL and CP (including my 4g is not working, because that, i think)
I noticed that there are different models 610f and 610f / ds (my model). Can this be the problem? if that's the problem, where can I find the rom for my model?

Maybe I can't help you that much but I only know you must flash the right .pit file with the stock rom. I did this on my SM-J700F and everything worked, before that my phone was dead for me. Just Google your phone models pit file, finding that file wasn't easy for me but I found it. You can also use SamFirm, a tool that I found in XDA. You can download your stock ROM (for Samsung) with fullspeed, and it is also reliable. The STOCK ROM should everytime work right with the right STOCK ROM file and the right PIT file. I found that link on the internet I can't guarantee it's the right one. You can also Google it yourself from a reliable resource. But I don't think it's wrong.
The PIT File----dosya.co/0zv84005icrk/SM-G610F_7-4-2017_10-0-3.pit.html
If you are using a Custom ROM read this:
And I had another problem, the ROM didn't even recognize my SIM card. there is actually nothing much to do. I heard much about methods. Some say if you are using something like Cyanogenmod or LineageOS try disabling System profiles, or take a backup of your stock ROM's Radio and EFS and restore them in your new ROM. Nothing worked for me. My ROM's developer published a new version of the ROM and that solved it. But If you are not good enough to edit the ROM then there is not something I think you can do.
I hope I solved your problem...