Hi Guys.
I really hope someone can help me. I'm kind of a newbie at this so please excuse if I don't use the correct terminology or something.
My Dad's Samsung Galaxy Note 10.1 has been rooted a few months ago and everything worked completely fine. Then about 2 months ago, it restarted randomly. (This was entirely random) Then something went wrong and the device would not boot at all.
It's a Samsung Galaxy Note 10.1 GT-N8000
So I tried flashing it with the factory firmware with no luck. (after this the white noise/static screen appeared)
I sent it in for repairs and they said it was a faulty battery and overcharged me to repair it. So I rejected their quotation and replaced the battery myself for a quarter of the price.
Unfortunately this did not fix the problem.
When turned on it shows a white noise screen(I hope that makes sense) and then shows the samsung logo after a few seconds. It will then restart and continue this cycle until I disconnect the battery or it runs out of power.
I'm almost completely certain that it is a software related issue. I'm thinking the firmware got corrupted somehow.
Can someone please refer me to a guide to completely flash the device so that there is no firmware on the device at all, and then flash it with either a custom firmware or the original samsung firmware.
Or if you guys know of an alternative fix please let me know!
PS. I can access the recovery mode (pressing the power & volume button).
I have uploaded a video to youtube showing exactly what it does.
Use Odin to reflash the latest firmware for the device, then boot into recovery and do a factory reset to wipe cash, data and dalvik. It should boot after that if it is a software issue.
Sent from my GT-N8013 using Tapatalk
Also, providing the link to the youtube video would help
N8000 loop
Hi everybody!
I've got the same problem. I installed a 4.4.2 rom a couple of months ago. Everything got well, no problems, no loop, no random restart.
Suddenly, while I was NOT using the tablet, it started to reboot.
I tried everything but I can only access in download mode.
With Odin it writes than was not possible to complete write.
What can I do?
Please, help me if you have any idea!
Thanks
Alberto
AlbertWolf said:
Hi everybody!
I've got the same problem. I installed a 4.4.2 rom a couple of months ago. Everything got well, no problems, no loop, no random restart.
Suddenly, while I was NOT using the tablet, it started to reboot.
I tried everything but I can only access in download mode.
With Odin it writes than was not possible to complete write.
What can I do?
Please, help me if you have any idea!
Thanks
Alberto
Click to expand...
Click to collapse
i am having the same problem...any progress ?
same problem here
Hi, I have the same problem. It started today, I wasn't using the tablet at all. I have GT-N8000 with German KitKat rooted. As the tablet boots ,at the samsung logo it freezes and restarts. I can access the download mode but not the CWM recovery. Im gonna try to flash again the CWM via the Download mode. Will see.... how about you guys ? Did you resolve the issue ?
thanks Gabriel
---------- Post added at 10:10 PM ---------- Previous post was at 09:17 PM ----------
Itried to FLASH CWM .... - result = Operation FAILED
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.41.6-n8000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
stock JB rom with PIT files FAILED !
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMF1_N8000OXXCMF1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
[B]<ID:0/009> Set PIT file..[/B]
<ID:0/009> DO NOT TURN OFF TARGET!!
[B]<ID:0/009> FAIL![/B]
<ID:0/009>
[B]<ID:0/009> Re-Partition operation failed.[/B]
<OSM> All threads completed. (succeed 0 / failed 1)
same here GT-N8000
after searching I re-flash with the Icecream Sandwitch Stock rom , this stopped the boat loop
but as I wipe everthing to factory reset, It seems that I lost the EFS folder
I tried all the ways adviced at the net...
end up with the factory mode(yellow text on screen....
no efs backup and don't know what to do.
pls pls help
same for me N8000 in bootloop cannot pass throught samsung logo and cannot enter in recovery just can enter in download mode :crying:
My wife's Note 10.1 does the same thing. Boot loop, Only thing I can reach is download mode. It won't boot past the Samsung Logo.
This Note is stock, it has never been flashed. My wife hasn't used it for a couple of weeks and now it's in this state.
Anyone?
Same here n8000 samsung bootloop, but i can acess recovery and downloaf mode, i reflashed stock kitkat and custom rom but nothing changed. Can i install ics rom? The last was kitkat.
Tried loading a couple of stock roms through Odin. They work every time. Odin declares it a success. But it still won't boot.
When I check the re-partition it fails at once. Doesn't do anything. Just fails.
I think it's time for an iPad.
I think it too bro....
boot loop Stock rom, no root.
boot to samsung logo and stuck. boot only to download mode. no recovery
HEEEEELP
-r-
sell the parts , your mobo is toast or try to replace the emmc chip on the board by someone...
gabiX87 said:
sell the parts , your mobo is toast or try to replace the emmc chip on the board by someone...
Click to expand...
Click to collapse
can we replace this part manually?
boozecraze said:
can we replace this part manually?
Click to expand...
Click to collapse
No the EMMC chip is soldered onto the board. It needs attention of a specialist.
here is my damaged board =
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's so discouraging... I've been looking for an answer to this same problem all weekend, and was so hopeful after reading and learning about all these different problems solved, and such brilliant minds tweaking their stuff for fun, there seems to be no answer to this problem of the re-boot loop. I used to think Samsung was the best, but now I've lost all faith...
exactly the same problem since this morning when my son was about to watch his favorite videos on youtube and turn on the note, it just stuck in the samsung logo,,,, cannot go to recovery, only download mode
#shouldgetipad?
Same issue here. The battery was completely drained so I charge it overnight and found Samsung boot logo in the morning. I tried to flash UAE stock ROM and it failed as it found no partition. I tried again with PIT file found in http://forum.xda-developers.com/showthread.php?t=2268735 and tried again but still fail:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXUDNF2_N8000OJVDNF3_N8000XXUDNF1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any luck anyone?
Thanks.
Related
I have followed many tutorials to the T and I have flashed with philz_touch_6.55.0-p5110 and GT-P5110_ClockworkMod-Recovery_6.0.1.0 to absouetely no avail whatsoever.
My counter is up to 15 and when I go into the recovery mode I get the default. I cannot for the life of me get the tablet to launch the recovery screens.
I have been at this for 4hours. I cant even update the device as it says the device altered. It also show custom , yet I CANNOT load the recovery other than the default.
What am I missing?
Android 4.2.2
Table: GT-P5113
More details:
From ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin both 3.5 and 1.85 I tried. Both say pass. I am completely and totally frustrated.
kjsphoto said:
I have followed many tutorials to the T and I have flashed with philz_touch_6.55.0-p5110 and GT-P5110_ClockworkMod-Recovery_6.0.1.0 to absouetely no avail whatsoever.
My counter is up to 15 and when I go into the recovery mode I get the default. I cannot for the life of me get the tablet to launch the recovery screens.
I have been at this for 4hours. I cant even update the device as it says the device altered. It also show custom , yet I CANNOT load the recovery other than the default.
What am I missing?
Android 4.2.2
Table: GT-P5113
More details:
From ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Odin both 3.5 and 1.85 I tried. Both say pass. I am completely and totally frustrated.
Click to expand...
Click to collapse
Flash recovery in Odin again but this time with auto reboot UNCHECKED. After it flashes, wait 10 seconds, unplug tablet, and boot into recovery (hold in combo until you see recovery screen. It will exit download mode.) Wipe cache and Dalvik and reboot. I'd recommend flashing @Android-Andi's TWRP for a good touch based recovery.
Sent from my SGH-T989
jrc2 said:
Flash recovery in Odin again but this time with auto reboot UNCHECKED. After it flashes, wait 10 seconds, unplug tablet, and boot into recovery (hold in combo until you see recovery screen. It will exit download mode.) Wipe cache and Dalvik and reboot. I'd recommend flashing @Android-Andi's TWRP for a good touch based recovery.
Sent from my SGH-T989
Click to expand...
Click to collapse
Thank you very much! Once I unchceked the re-boot and then rebooted holding down the key it worked!
I am not sure what you mean by the TWRP flash?
Again, thank you very much for y our help..
Kindest Regards...
kjsphoto said:
Thank you very much! Once I unchceked the re-boot and then rebooted holding down the key it worked!
I am not sure what you mean by the TWRP flash?
Again, thank you very much for y our help..
Kindest Regards...
Click to expand...
Click to collapse
TWRP is another recovery. @Android-Andi has a recovery thread in the development section. If you go to his download page, there is a .zip and a .tar file. The .tar is for Odin and the .zip is if you want to flash it in your current recovery. You just choose one file and flash it accordingly.
Sent from my SGH-T989
Hi folks .
Present some servise firmwares , including BL , AP , CP , CSC with PIT-file , for SM-T53X and SM-T33X .For KitKat and Lollipop .
Flash via Odin .
Link https://www.androidfilehost.com/?w=files&flid=35515
Don't forget press "Thanks" button
I added a few firmware
Added few firmwares for Tab 4 8.0 (5.1.1)
service firmwares will come as OTA updates?
patsio said:
service firmwares will come as OTA updates?
Click to expand...
Click to collapse
Flash via Odin .
Click to expand...
Click to collapse
Read OP
repey6 said:
Read OP
Click to expand...
Click to collapse
Yes, i only wondered if service firmwares will come later as OTA updates. I got Galaxy 335, i guess SM-T335XXU1BOF8_AUT_SERVICE_LP_5.1.1 is for me as i'm on LP T335XXU1BOF8_T335OXA1BOF8_T335XXU1BOF3_Home.
patsio said:
Yes, i only wondered if service firmwares will come later as OTA updates. I got Galaxy 335, i guess SM-T335XXU1BOF8_AUT_SERVICE_LP_5.1.1 is for me as i'm on LP T335XXU1BOF8_T335OXA1BOF8_T335XXU1BOF3_Home.
Click to expand...
Click to collapse
Yes it is . Why do you want Service firmware ?
repey6 said:
Yes it is . Why do you want Service firmware ?
Click to expand...
Click to collapse
Because ServiceFirmware updates offer the latest stability enchancements, security buf fixes etc, right? By the way, the zip contains 4 files, could you pls explain what each file initials stand for?
Thanks!
patsio said:
Because ServiceFirmware updates offer the latest stability enchancements, security buf fixes etc, right? By the way, the zip contains 4 files, could you pls explain what each file initials stand for?
Thanks!
Click to expand...
Click to collapse
The main difference between a service firmware from a usual stock - forced reset to factory settings and provided wipe system (command "csc = factory" in the file on the way cache.img/recovery/command; for regular firmware it looks like "csc = home"). CSC file contains PIT-file to force the file system layout verification.
Caution! Service firmware produces wipe user data:
- removes section USERDATA and recreate it with the factory settings;
- removes SD-CARD partition and recreate it with the factory settings (format Internal sd-card).
It makes:
- the system state official: in Downloading mode Current Binary: Official and System Status: Official;
@repey6, I read the complete thread, but I'm still not clear on which of these files I should flash. Do I only flash AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5, or all 3? And if all 3, in which order? (Asking here, since I don't want spam sub77's ROM thread)
SomeDuder said:
@repey6, I read the complete thread, but I'm still not clear on which of these files I should flash. Do I only flash AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5, or all 3? And if all 3, in which order? (Asking here, since I don't want spam sub77's ROM thread)
Click to expand...
Click to collapse
All three files simultaneously .
repey6 said:
All three files simultaneously .
Click to expand...
Click to collapse
What, like so?:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cuz I did that, and it seems to only flash the stock ROM. Anyway, the result is the same - it keeps stuck at the bootlogo and, after a while, becomes responsive to touch, but with no screen updates...
SomeDuder said:
What, like so?:
Cuz I did that, and it seems to only flash the stock ROM. Anyway, the result is the same - it keeps stuck at the bootlogo and, after a while, becomes responsive to touch, but with no screen updates...
Click to expand...
Click to collapse
Try to reflash again and tick re-partition checkbox
I did:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_BTU_T530BTU1BOE1_CL4973560_QB5048859_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Le proof (Click for image).
It says I've got firmware/bootloader (I don't think there's a way to tell which version of the BL you have) version T530XXU1BOD8, so that seems to be the same as the Lollipop stock ROM (T530XXU1BOD8_T530OXA1BOD8_HOME.tar.md5).
It still won't boot into anything resembling an OS, but I'm gonna go through the whole TWRP and CM installation again. Who knows, maybe it'll do the trick.
I'm afraid this is a different problem tho, like it's not loading the correct display drivers or something...
After flashing you must hear Samsung music normal and wait 8-10 min
repey6 said:
After flashing you must hear Samsung music normal and wait 8-10 min
Click to expand...
Click to collapse
Yup, heard the startup tune, Kies recognized my device again:
(And I let it update the firmware to the latest official whatever)
But it still will not show anything else than the bootlogo as I'm writing this (+10 minutes). I'll keep it plugged in for the rest of the afternoon, maybe something will happen. If not, I'll try again in a few months, maybe it's just some weird bug with the device, idk.
Anyway, thank you for your assistance @repey6!
SomeDuder said:
Yup, heard the startup tune, Kies recognized my device again:
(And I let it update the firmware to the latest official whatever)
But it still will not show anything else than the bootlogo as I'm writing this (+10 minutes). I'll keep it plugged in for the rest of the afternoon, maybe something will happen. If not, I'll try again in a few months, maybe it's just some weird bug with the device, idk.
Anyway, thank you for your assistance @repey6!
Click to expand...
Click to collapse
Strange all . Try to go to stock recovery and do factory reset . May be this help ?
[Q] Soft brick S6 ( SM-G920F) 5.1.1.
Tried to flash it with S6_UniKernel_v8-0002-ODIN, cf-autoroot, and it did only say pass and the phone started to reboot but it didnt get pass the logo part. So I tried to go back to stock firmware, and it only got fail so I tried with 5.0.2 instead and that didnt work either. Both case gave me this kind of error.
The firmware was from sammobile.
I didnt saw OEM in "Developer options" hope that I didnt miss it, but some post did say some phone have bootloader unlocked at start, so it should be noproblem to flash the phone. But it didnt work out for me so well.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
KFelix said:
.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.
cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.
Calnyx said:
cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.
Click to expand...
Click to collapse
I tried to connect phone with Kies, nothing happend, just "connecting.." what can I do?
Tried flashing kernel alot of times, same problem .
Just re-read his post, one small problem, the box i have is a bit damage and i can't find the S/N , is there any chance I can get the S/N , I have the ART code and some numbers under a bar but wasn't the S/N with numbers and chars?
Thanks for the help
Can't find the S/N on my box due to damage , is there other way? Do they still have the S/N inprinted under the battery? And when I'am in Odin "Binary : Custom , System : Official , Knox : 1" So it did someone "half-rooted" it or something but I have tried to reflash unikernel v8 still the same problem, is there any way to fix it without going back to the latest stable firmware with the S/N in Kies?
first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider
Ghostrider said:
first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider
Click to expand...
Click to collapse
Wow, dont know what to say but this did WORK , didn't know that I could open TWRP, because I tried to go to recovery mode but the phone didn't react so I just thought it was messed up. Thanks friend.
you're Welcome
good to hear it Worked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi all, my S4 mini won't turn on, while i was messaging, the display shutting down and can't turn on it.
When i connected it to my pc, my pc found new driver: QHSUSB_DLOAD. I searched it on google and i discovered that my phone was bricked without doing anything. So i flashed a sdcard with debrick.img and my phone finally showed:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
BOOT RECOVERY
WRITE 139008 sectors
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-i9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANT VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
So i tried to flash it with Odin and after Odin said:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_shi p_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULT I_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_M ULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So i searched on internet PIT files and i found "CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit", i tried to flash with it and Odin show same thing:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
While on the phone showed:
Code:
PIT FAIL : TOTAL SECTORS 0
ODIN flash read failure
I tried nand flash erase and show me other errors.
I think emmc died, if not, can anyone help me?
if emmc died, how can i install all partition ( bootloader ecc.) on sdcard for start the phone with it?
supergatto said:
Hi all, my S4 mini won't turn on, while i was messaging, the display shutting down and can't turn on it.
When i connected it to my pc, my pc found new driver: QHSUSB_DLOAD. I searched it on google and i discovered that my phone was bricked without doing anything. So i flashed a sdcard with debrick.img and my phone finally showed:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
BOOT RECOVERY
WRITE 139008 sectors
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-i9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANT VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
So i tried to flash it with Odin and after Odin said:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_shi p_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULT I_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_M ULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So i searched on internet PIT files and i found "CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit", i tried to flash with it and Odin show same thing:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
While on the phone showed:
Code:
PIT FAIL : TOTAL SECTORS 0
ODIN flash read failure
I tried nand flash erase and show me other errors.
I think emmc died, if not, can anyone help me?
if emmc died, how can i install all partition ( bootloader ecc.) on sdcard for start the phone with it?
Click to expand...
Click to collapse
here same
Can anyone help me?
@supergatto @espaciox99
I had the same problem with my galaxy s4 (gt-9505) where it didn't want to flash stock rom but I was able to root the phone (with cf autoroot) and also able to flash cwm recovery and flash resurrection remix and it's working fine now. Try it out and tell me if it works (better custom than nothing) and don't forget to press the thanks button .
a. felon said:
@supergatto @espaciox99
I had the same problem with my galaxy s4 (gt-9505) where it didn't want to flash stock rom but I was able to root the phone (with cf autoroot) and also able to flash cwm recovery and flash resurrection remix and it's working fine now. Try it out and tell me if it works (better custom than nothing) and don't forget to press the thanks button .
Click to expand...
Click to collapse
I tried CF-Auto-Root by this http://download.chainfire.eu/425/CF...Auto-Root-serranolte-serranoltexx-gti9195.zip
It says to use PIT file, i tried with it, and show same error of first post.
supergatto said:
I tried CF-Auto-Root by this http://download.chainfire.eu/425/CF...Auto-Root-serranolte-serranoltexx-gti9195.zip
It says to use PIT file, i tried with it, and show same error of first post.
Click to expand...
Click to collapse
Try with this method, it worked for me http://forum.xda-developers.com/showthread.php?t=2364980 good luck.
Don't just say thanks, press the ? button.
a. felon said:
Try with this method, it worked for me http://forum.xda-developers.com/showthread.php?t=2364980 good luck.
Don't just say thanks, press the button.
Click to expand...
Click to collapse
Here the result...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
supergatto said:
Here the result...
Click to expand...
Click to collapse
This is the only thing I could find, hope it solves your problem bro.
Follow radicspeter's method as it's the one that seems to work. http://forum.xda-developers.com/showthread.php?t=2469375&page=2 Tell us if it works because @espaciox99 has the same problem like you, good luck.
Thanks for reply.
Code:
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013>
<ID:0/013> There is no PIT partition.
After used PIT file.
Code:
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> FAIL!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.
UP
UP
UP
Your eMMC is definitively bricked, or at least it seems to be.
I didn't find any solution for that on quick, but you could be able to manually repartition your sd card. I see your device is booting from sd card, so maybe you could give a try to plug in the SD into a linux machine and see what it shows you.
xdvs23 said:
Your eMMC is definitively bricked, or at least it seems to be.
I didn't find any solution for that on quick, but you could be able to manually repartition your sd card. I see your device is booting from sd card, so maybe you could give a try to plug in the SD into a linux machine and see what it shows you.
Click to expand...
Click to collapse
I did it, and show 24 partitions like modem, sbl1, sbl2, sbl3, recovery, system, tz, hidden, cache, efs, and others, but if i want boot android with sdcard on my phone, how can i do?
I tried to copy eMMC from another S4 mini GT-I9195 on sdcard with "busybox dd..." command and it show same thing of pics.
Other thing that i tried on my phone with Odin: I tried to repartition eMMC with PIT and CSC and both show same thing of pics.
supergatto said:
I did it, and show 24 partitions like modem, sbl1, sbl2, sbl3, recovery, system, tz, hidden, cache, efs, and others, but if i want boot android with sdcard on my phone, how can i do?
I tried to copy eMMC from another S4 mini GT-I9195 on sdcard with "busybox dd..." command and it show same thing of pics.
Other thing that i tried on my phone with Odin: I tried to repartition eMMC with PIT and CSC and both show same thing of pics.
Click to expand...
Click to collapse
Good, I don't know if you need to install a bootloader but there are couple of videos showing how you can boot from sdcard by modifying the hardware.
xdvs23 said:
Good, I don't know if you need to install a bootloader but there are couple of videos showing how you can boot from sdcard by modifying the hardware.
Click to expand...
Click to collapse
Can you post some video? I didn't find it...
supergatto said:
Can you post some video? I didn't find it...
Click to expand...
Click to collapse
I found this on quick.
xdvs23 said:
I found this on quick.
Click to expand...
Click to collapse
In the video show same thing that i did... Except disassembling the phone. And this doesn't work.
supergatto said:
In the video show same thing that i did... Except disassembling the phone. And this doesn't work.
Click to expand...
Click to collapse
Ok so I don't know if there is any way to fix that. I also had a eMMC brick but on a S3 mini. If you did not install custom software you can send it for repair to samsung. If your warranty is already void you can pay for them to repair it but that would be expensive. You can also look for a eMMC replacement and replace it yourself. That could cost around 40 bucks, depending on what you need to order (dollars or euros).
Your emmc is now write-protected that means you simply can not flash anything. A reason for the brick can be overwriting the same file many times, using poorly developed apps or software / ROMs, daily backups in messaging apps, but also flashing many many many times could potentially make the eMMC to die. That is well-known on Samsung devices.
Is there any way for boot android from sdcard without replacing eMMC?
I found other thread with write protection: enabled but they can flash..
http://forum.xda-developers.com/showthread.php?t=2322185
Hi Everybody,
my phone was working with latest twrp and lineage os 15.1 without issues until 2 weeks ago. I got a /efs error, as I was on my way to the airport, I just rebooted a couple of times. This put the phone in the loop that it now only boots into this, which roughly needs 2 hours to get there:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from restarting (Volume-Down and Power Button) it takes roughly 2 hours to get back into the same state.
any other button combinations not working, so no Access to twrp...
I Think the screen does not change during Odin Upload tries, so no status or other writing on the screen...
What i have tried so far:
Samsung KIES:
in "emergency recover" -> "phone model is not supported" (after adding Model and SN: ) in Main screen it is stated as an "unsupported device"
Samsung Smart Switch:[/INDENT]
roughly the same error as in Kies does not show up in list in emergency recovery, in Main screen it is stated as an "unsupported device"
Odin:
Downloaded latest firmware from sammobile
1st try: it failed (after several hours) with a log stating re-partition not possible ( I have not saved that log...)
2nd try (with Option Re-Partition enabled) log static for 1 hour EDIT: now it failed:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 3981 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
any hint in which direction i need to go, as trial an error takes so much time with the telephone being that slow...
thanks in advance
Next Try:
Odin:
Downloaded latest firmware from sammobile
3rd try:
Code:
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 3981 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
next I will try flashing TWRP with odin
any other ideas?
hello, have you tried unzipping the sammobile file first? firmwares consist of 5 different files
diagonals said:
hello, have you tried unzipping the sammobile file first? firmwares consist of 5 different files
Click to expand...
Click to collapse
-> Yes i did, and i allocated them as the are named (BL -> BL;AP -> AP;CP -> CP;CSC_DBT -> CSC)
Status:
after many tries to get into Download mode i can not mange it...
The Phone only reboots when volume down + Power is presse, this takes two ours and only gets me to the screen shown in first post, so it looks something like Download mode but it is not 100%, it shows up in ODIN but is not accesable
Volume down + power + home (holding for 10s upto several minutes) results in blank screen and I need to wait several hours to start over again
Vollume up + power + home results in blank screen and I need to wait several hours to start over again
I also had once a distorted screen, looking like a RAM-Hardware Problem
any Ideas on how to proceed?
thanks in Advance!
Thanks for your message:
Oemdroid said:
I can fix it
Add me
Whatsapp +xxxxx
https://hangouts.google.com
[email protected]
Click to expand...
Click to collapse
Sounds good!
What is your approach?
Thanks
jeti88 said:
Thanks for your message:
Sounds good!
What is your approach?
Thanks
Click to expand...
Click to collapse
He doesn't have any approach. He just likes to waste others time. In my thread, https://forum.xda-developers.com/galaxy-s7/help/samsung-s7-edge-stuck-powered-android-t3859791 he did the same message. When I contacted him on WhatsApp, he wanted the picture of the phone in download mode that I provided. Then he stopped replying and seeing any of my messages. God knows what is his intentions.
ukero said:
He doesn't have any approach. He just likes to waste others time. In my thread, https://forum.xda-developers.com/galaxy-s7/help/samsung-s7-edge-stuck-powered-android-t3859791 he did the same message. When I contacted him on WhatsApp, he wanted the picture of the phone in download mode that I provided. Then he stopped replying and seeing any of my messages. God knows what is his intentions.
Click to expand...
Click to collapse
thats what i thought, hence I only answered in the post not contacting him directly...
I am getting frustrated with the phone always trying to enter Download mode, waiting 2 Hours and trying over...