Database Info

[KK&LP]Some service firmwares for SM-T53X and SM-T33X

Hi folks .
Present some servise firmwares , including BL , AP , CP , CSC with PIT-file , for SM-T53X and SM-T33X .For KitKat and Lollipop .
Flash via Odin .
Link https://www.androidfilehost.com/?w=files&flid=35515
Don't forget press "Thanks" button

I added a few firmware

Added few firmwares for Tab 4 8.0 (5.1.1)

service firmwares will come as OTA updates?

patsio said:
service firmwares will come as OTA updates?
Click to expand...
Click to collapse
Flash via Odin .
Click to expand...
Click to collapse
Read OP

repey6 said:
Read OP
Click to expand...
Click to collapse
Yes, i only wondered if service firmwares will come later as OTA updates. I got Galaxy 335, i guess SM-T335XXU1BOF8_AUT_SERVICE_LP_5.1.1 is for me as i'm on LP T335XXU1BOF8_T335OXA1BOF8_T335XXU1BOF3_Home.

patsio said:
Yes, i only wondered if service firmwares will come later as OTA updates. I got Galaxy 335, i guess SM-T335XXU1BOF8_AUT_SERVICE_LP_5.1.1 is for me as i'm on LP T335XXU1BOF8_T335OXA1BOF8_T335XXU1BOF3_Home.
Click to expand...
Click to collapse
Yes it is . Why do you want Service firmware ?

repey6 said:
Yes it is . Why do you want Service firmware ?
Click to expand...
Click to collapse
Because ServiceFirmware updates offer the latest stability enchancements, security buf fixes etc, right? By the way, the zip contains 4 files, could you pls explain what each file initials stand for?
Thanks!

patsio said:
Because ServiceFirmware updates offer the latest stability enchancements, security buf fixes etc, right? By the way, the zip contains 4 files, could you pls explain what each file initials stand for?
Thanks!
Click to expand...
Click to collapse
The main difference between a service firmware from a usual stock - forced reset to factory settings and provided wipe system (command "csc = factory" in the file on the way cache.img/recovery/command; for regular firmware it looks like "csc = home"). CSC file contains PIT-file to force the file system layout verification.
Caution! Service firmware produces wipe user data:
- removes section USERDATA and recreate it with the factory settings;
- removes SD-CARD partition and recreate it with the factory settings (format Internal sd-card).
It makes:
- the system state official: in Downloading mode Current Binary: Official and System Status: Official;

@repey6, I read the complete thread, but I'm still not clear on which of these files I should flash. Do I only flash AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5, or all 3? And if all 3, in which order? (Asking here, since I don't want spam sub77's ROM thread)

SomeDuder said:
@repey6, I read the complete thread, but I'm still not clear on which of these files I should flash. Do I only flash AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5, or all 3? And if all 3, in which order? (Asking here, since I don't want spam sub77's ROM thread)
Click to expand...
Click to collapse
All three files simultaneously .

repey6 said:
All three files simultaneously .
Click to expand...
Click to collapse
What, like so?:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cuz I did that, and it seems to only flash the stock ROM. Anyway, the result is the same - it keeps stuck at the bootlogo and, after a while, becomes responsive to touch, but with no screen updates...

SomeDuder said:
What, like so?:
Cuz I did that, and it seems to only flash the stock ROM. Anyway, the result is the same - it keeps stuck at the bootlogo and, after a while, becomes responsive to touch, but with no screen updates...
Click to expand...
Click to collapse
Try to reflash again and tick re-partition checkbox

I did:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_BTU_T530BTU1BOE1_CL4973560_QB5048859_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Le proof (Click for image).
It says I've got firmware/bootloader (I don't think there's a way to tell which version of the BL you have) version T530XXU1BOD8, so that seems to be the same as the Lollipop stock ROM (T530XXU1BOD8_T530OXA1BOD8_HOME.tar.md5).
It still won't boot into anything resembling an OS, but I'm gonna go through the whole TWRP and CM installation again. Who knows, maybe it'll do the trick.
I'm afraid this is a different problem tho, like it's not loading the correct display drivers or something...

After flashing you must hear Samsung music normal and wait 8-10 min

repey6 said:
After flashing you must hear Samsung music normal and wait 8-10 min
Click to expand...
Click to collapse
Yup, heard the startup tune, Kies recognized my device again:
(And I let it update the firmware to the latest official whatever)
But it still will not show anything else than the bootlogo as I'm writing this (+10 minutes). I'll keep it plugged in for the rest of the afternoon, maybe something will happen. If not, I'll try again in a few months, maybe it's just some weird bug with the device, idk.
Anyway, thank you for your assistance @repey6!

SomeDuder said:
Yup, heard the startup tune, Kies recognized my device again:
(And I let it update the firmware to the latest official whatever)
But it still will not show anything else than the bootlogo as I'm writing this (+10 minutes). I'll keep it plugged in for the rest of the afternoon, maybe something will happen. If not, I'll try again in a few months, maybe it's just some weird bug with the device, idk.
Anyway, thank you for your assistance @repey6!
Click to expand...
Click to collapse
Strange all . Try to go to stock recovery and do factory reset . May be this help ?

Samsung galaxy s4 mini GT-I9195 bricked without doing anything.

Hi all, my S4 mini won't turn on, while i was messaging, the display shutting down and can't turn on it.
When i connected it to my pc, my pc found new driver: QHSUSB_DLOAD. I searched it on google and i discovered that my phone was bricked without doing anything. So i flashed a sdcard with debrick.img and my phone finally showed:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
BOOT RECOVERY
WRITE 139008 sectors
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-i9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANT VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
So i tried to flash it with Odin and after Odin said:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_shi p_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULT I_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_M ULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So i searched on internet PIT files and i found "CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit", i tried to flash with it and Odin show same thing:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
While on the phone showed:
Code:
PIT FAIL : TOTAL SECTORS 0
ODIN flash read failure
I tried nand flash erase and show me other errors.
I think emmc died, if not, can anyone help me?
if emmc died, how can i install all partition ( bootloader ecc.) on sdcard for start the phone with it?

supergatto said:
Hi all, my S4 mini won't turn on, while i was messaging, the display shutting down and can't turn on it.
When i connected it to my pc, my pc found new driver: QHSUSB_DLOAD. I searched it on google and i discovered that my phone was bricked without doing anything. So i flashed a sdcard with debrick.img and my phone finally showed:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
BOOT RECOVERY
WRITE 139008 sectors
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-i9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANT VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
So i tried to flash it with Odin and after Odin said:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_shi p_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULT I_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_M ULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So i searched on internet PIT files and i found "CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit", i tried to flash with it and Odin show same thing:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
While on the phone showed:
Code:
PIT FAIL : TOTAL SECTORS 0
ODIN flash read failure
I tried nand flash erase and show me other errors.
I think emmc died, if not, can anyone help me?
if emmc died, how can i install all partition ( bootloader ecc.) on sdcard for start the phone with it?
Click to expand...
Click to collapse
here same

Can anyone help me?

@supergatto @espaciox99
I had the same problem with my galaxy s4 (gt-9505) where it didn't want to flash stock rom but I was able to root the phone (with cf autoroot) and also able to flash cwm recovery and flash resurrection remix and it's working fine now. Try it out and tell me if it works (better custom than nothing) and don't forget to press the thanks button .

a. felon said:
@supergatto @espaciox99
I had the same problem with my galaxy s4 (gt-9505) where it didn't want to flash stock rom but I was able to root the phone (with cf autoroot) and also able to flash cwm recovery and flash resurrection remix and it's working fine now. Try it out and tell me if it works (better custom than nothing) and don't forget to press the thanks button .
Click to expand...
Click to collapse
I tried CF-Auto-Root by this http://download.chainfire.eu/425/CF...Auto-Root-serranolte-serranoltexx-gti9195.zip
It says to use PIT file, i tried with it, and show same error of first post.

supergatto said:
I tried CF-Auto-Root by this http://download.chainfire.eu/425/CF...Auto-Root-serranolte-serranoltexx-gti9195.zip
It says to use PIT file, i tried with it, and show same error of first post.
Click to expand...
Click to collapse
Try with this method, it worked for me http://forum.xda-developers.com/showthread.php?t=2364980 good luck.
Don't just say thanks, press the ? button.

a. felon said:
Try with this method, it worked for me http://forum.xda-developers.com/showthread.php?t=2364980 good luck.
Don't just say thanks, press the button.
Click to expand...
Click to collapse
Here the result...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

supergatto said:
Here the result...
Click to expand...
Click to collapse
This is the only thing I could find, hope it solves your problem bro.
Follow radicspeter's method as it's the one that seems to work. http://forum.xda-developers.com/showthread.php?t=2469375&page=2 Tell us if it works because @espaciox99 has the same problem like you, good luck.

Thanks for reply.
Code:
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013>
<ID:0/013> There is no PIT partition.
After used PIT file.
Code:
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> FAIL!
<ID:0/013>
<ID:0/013> Re-Partition operation failed.

UP

UP

UP

Your eMMC is definitively bricked, or at least it seems to be.
I didn't find any solution for that on quick, but you could be able to manually repartition your sd card. I see your device is booting from sd card, so maybe you could give a try to plug in the SD into a linux machine and see what it shows you.

xdvs23 said:
Your eMMC is definitively bricked, or at least it seems to be.
I didn't find any solution for that on quick, but you could be able to manually repartition your sd card. I see your device is booting from sd card, so maybe you could give a try to plug in the SD into a linux machine and see what it shows you.
Click to expand...
Click to collapse
I did it, and show 24 partitions like modem, sbl1, sbl2, sbl3, recovery, system, tz, hidden, cache, efs, and others, but if i want boot android with sdcard on my phone, how can i do?
I tried to copy eMMC from another S4 mini GT-I9195 on sdcard with "busybox dd..." command and it show same thing of pics.
Other thing that i tried on my phone with Odin: I tried to repartition eMMC with PIT and CSC and both show same thing of pics.

supergatto said:
I did it, and show 24 partitions like modem, sbl1, sbl2, sbl3, recovery, system, tz, hidden, cache, efs, and others, but if i want boot android with sdcard on my phone, how can i do?
I tried to copy eMMC from another S4 mini GT-I9195 on sdcard with "busybox dd..." command and it show same thing of pics.
Other thing that i tried on my phone with Odin: I tried to repartition eMMC with PIT and CSC and both show same thing of pics.
Click to expand...
Click to collapse
Good, I don't know if you need to install a bootloader but there are couple of videos showing how you can boot from sdcard by modifying the hardware.

xdvs23 said:
Good, I don't know if you need to install a bootloader but there are couple of videos showing how you can boot from sdcard by modifying the hardware.
Click to expand...
Click to collapse
Can you post some video? I didn't find it...

supergatto said:
Can you post some video? I didn't find it...
Click to expand...
Click to collapse
I found this on quick.

xdvs23 said:
I found this on quick.
Click to expand...
Click to collapse
In the video show same thing that i did... Except disassembling the phone. And this doesn't work.

supergatto said:
In the video show same thing that i did... Except disassembling the phone. And this doesn't work.
Click to expand...
Click to collapse
Ok so I don't know if there is any way to fix that. I also had a eMMC brick but on a S3 mini. If you did not install custom software you can send it for repair to samsung. If your warranty is already void you can pay for them to repair it but that would be expensive. You can also look for a eMMC replacement and replace it yourself. That could cost around 40 bucks, depending on what you need to order (dollars or euros).
Your emmc is now write-protected that means you simply can not flash anything. A reason for the brick can be overwriting the same file many times, using poorly developed apps or software / ROMs, daily backups in messaging apps, but also flashing many many many times could potentially make the eMMC to die. That is well-known on Samsung devices.

Is there any way for boot android from sdcard without replacing eMMC?
I found other thread with write protection: enabled but they can flash..
http://forum.xda-developers.com/showthread.php?t=2322185

Can't get Odin to work for the life of me

I'm trying to get Odin to work so I can flash my bootlooped S7 back to stock ROM, but I can't get it to work at all. There are so many different "solutions" online, and none of them are working. I've followed the steps in this guide, downloaded and installed the USB drivers, using Odin3 v.3.13, using the SM-G930F AP/CSC files for my country and model downloaded from updato, and I'm still getting this error in Odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> modem_debug.bin
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 4404 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I suspect it's an issue with the drivers. When I plug the USB into the port, I get a "Installing device drivers" window, which recognizes two different devices: "SAMSUNG Mobile USB CDC Composite Device" and "SAMSUNG Mobile USB Modem". The CDC Composite Device is version 2.12.5.0. The Mobile USB Modem is version 2.12.4.0. I've pointed the modem to the USB drivers downloaded in the guide I'm following, but still get the Complete(Write) failed error, switched USB ports, still get the error, switched USB cables, still get the error, tried it with and without "Nand Erase" and "Re-Partition" checked, still get it, tried different Odin versions, still get it. Nothing is working, I've been at this for hours and am at my wit's end. Can someone please help?
Thank you.

S7
Were you able to solve this problem?
I also have the same error in my galaxy s7
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

These things I say might be long shots but well here I go:
For the drivers (if on Windows), disable automatic driver searching and then completely remove the samsung drivers and reboot. Then re-install them with your phone disconnected, reboot your computer again and then connect your phone while it is booted to system and make sure you select charging only or MTP.
Could also go advanced mode and look for leftovers in the registry of the samsung drivers if you know how to.
Or try downloading the latest firmware "G930FXXU2EREM" and try flashing it, if you succeed then you can flash your country/carriers CSC later and possibly modem if you experience low signal.

try running odin in admin rights or double check if the files you got are the correct one's.

You should use the PIT file from CSC file.

Root failed

I tried to root via odin, got error that failed, now my s7 is stuck on updating the device software, and can't start up, what should i do?
I tried recovery with Smart switch but my model is not supported, also tried with kies, same situation. what to do?

gosha90 said:
I tried to root via odin, got error that failed, now my s7 is stuck on updating the device software, and can't start up, what should i do?
I tried recovery with Smart switch but my model is not supported, also tried with kies, same situation. what to do?
Click to expand...
Click to collapse
When you start messing about with it Smart switch and Kies don't want to know, so don't bother trying.
What device do you have? Where are you? What firmware installed?
To force a reboot hold power+volume down until the phone goes off then Quickly press home+volume up+power. This should boot into recovery mode where you can choose factory reset and reboot.
If this fails then force reboot again (power+volume down) but this time press power+home+volume down to boot into download mode, then flash the correct firmware with odin.

cooltt said:
When you start messing about with it Smart switch and Kies don't want to know, so don't bother trying.
What device do you have? Where are you? What firmware installed?
To force a reboot hold power+volume down until the phone goes off then Quickly press home+volume up+power. This should boot into recovery mode where you can choose factory reset and reboot.
If this fails then force reboot again (power+volume down) but this time press power+home+volume down to boot into download mode, then flash the correct firmware with odin.
Click to expand...
Click to collapse
I have Samsung Galaxy s7 G930F, I,m from Serbia, firmware is stock, android is 8.0, from my provider. I have warranty but in this case is not valid. I tried to reboot and use recovery mod, but it won't.

gosha90 said:
I have Samsung Galaxy s7 G930F, I,m from Serbia, firmware is stock, android is 8.0, from my provider. I have warranty but in this case is not valid. I tried to reboot and use recovery mod, but it won't.
Click to expand...
Click to collapse
can you force reboot hold power+volume down? 20 seconds

cooltt said:
can you force reboot hold power+volume down? 20 seconds
Click to expand...
Click to collapse
yes i can force reebot, and its showing this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
also i can enter download mode
but that is far as i get. Phone won't even turn off, he is becoming so hot right now.

gosha90 said:
yes i can force reebot, and its showing this
also i can enter download mode
but that is far as i get. Phone won't even turn off, he is becoming so hot right now.
Click to expand...
Click to collapse
Ok press home+volume down+power you should then get into download mode

cooltt said:
Ok press home+volume down+power you should then get into download mode
Click to expand...
Click to collapse
yes i can enter download mode, but i can't do anything from there

gosha90 said:
yes i can enter download mode, but i can't do anything from there
Click to expand...
Click to collapse
Ok i forgot to say first try home+volume down+power until the phone goes off then let go. The phone should reboot by itself, if it doesn't press power.
tell me what happens

cooltt said:
Ok i forgot to say first try home+volume down+power until the phone goes off then let go. The phone should reboot by itself, if it doesn't press power.
tell me what happens
Click to expand...
Click to collapse
It does reboot itself after 1 sec, but on this

gosha90 said:
It does reboot itself after 1 sec, but on this
Click to expand...
Click to collapse
Ok thats fine, so you want to get back to download mode......home+volume down+power....hold until download mode shows. Then connect to pc, Start Odin, press volume up, Odin shows "added", do you know how to flash firmware?

cooltt said:
Ok thats fine, so you want to get back to download mode......home+volume down+power....hold until download mode shows. Then connect to pc, Start Odin, press volume up, Odin shows "added", do you know how to flash firmware?
Click to expand...
Click to collapse
I saw few videos flashing via odin, looks very easy. I took phone to a local phone store, so they will try to flash it. If they fail, i must flash it no matter what.

Got phone from local phone store, phone is working, except network, i can't make calls, messages cause i have no network coverage. I did tried to flash firmware from my country, but everytime i get fail.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1303)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 3966 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Done it! I made it! Now its working perfectly! Please close or delete thread!

SOLVED - Bricked/stuck on Smart Switch error screen

Samsung S7 (unlocked) (UK) SM-G930F
Hi
I don't know really where to start but I can tell you where I've ended up.
I tried to install Resurrection and after I went through it all it has just ended up with Odin failing.
I then thought I would try to reinstall the stock from Sam's mobile and following that I'm ending up with still a fail and also smart switch software message remaining on the screen.
These are the files from Sam's mobile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The message left on my screen after Odin's flash
Code:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 8, BINARY: 2
and odins error log
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4262 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

TokyoElbow said:
Hi
I don't know really where to start but I can tell you where I've ended up.
I tried to install Resurrection and after I went through it all it has just ended up with Odin failing.
I then thought I would try to reinstall the stock from Sam's mobile and following that I'm ending up with still a fail and also smart switch software message remaining on the screen.
These are the files from Sam's mobile
The message left on my screen after Odin's flash
and odins error log
Click to expand...
Click to collapse
The firmware you are trying to flash is older then what is already on the device. You need the correct version 8 firmware to flash with Odin.

cooltt said:
The firmware you are trying to flash is older then what is already on the device. You need the correct version 8 firmware to flash with Odin.
Click to expand...
Click to collapse
Thanks for the reply,
I searched for the youngest firmware for a UK phone and now its working, so thanks for the heads up.

TokyoElbow said:
Thanks for the reply,
is there anyway I can find out what firmware should go on this device?
Click to expand...
Click to collapse
The firmware you've posted is an old unbranded France yes?
This is the latest version of that firmware https://www.sammobile.com/samsung/galaxy-s7/firmware/SM-G930F/XEF/download/G930FXXS8ETC2/327936
If you know how to use Samfirm tool you can download it faster. The firmware code is XEF.

The firmware you've posted is an old unbranded France yes?
Click to expand...
Click to collapse
No, it was a UK firmware for the Three Network (H3G)
If you know how to use Samfirm tool you can download it faster. The firmware code is XEF.
Click to expand...
Click to collapse
Thanks, I'm not familiar with it, I'll check it out. I paid for a 30 day subscription so the download speed was ok.

TokyoElbow said:
No, it was a UK firmware for the Three Network (H3G)
Thanks, I'm not familiar with it, I'll check it out. I paid for a 30 day subscription so the download speed was ok.
Click to expand...
Click to collapse
Hey I posted the message before I saw you'd already found the right firmware so shouldn't have to do anything else now. Unbranded UK has the code BTU.
The S7 is getting on abit now so I don't think there will be any further release from veriosn 8.

cooltt said:
Hey I posted the message before I saw you'd already found the right firmware so shouldn't have to do anything else now. Unbranded UK has the code BTU.
The S7 is getting on abit now so I don't think there will be any further release from veriosn 8.
Click to expand...
Click to collapse
I think I'll grab the unbranded firmware as this one has Virgin crap all over it....(that didn't sound right at all HA HA) :laugh:
Nice one for the heads up on Samfirm, the speeds are just as quick as the paid subscription on Sam's mobile.
cheers