Related
Hi all, got an update this morning for the baltic variant of kit kat.
27mb
Sent from my SM-N9005 using XDA Premium 4 mobile app
Details from my Note 3
Sent from my SM-N9005 using XDA Premium 4 mobile app
Downloading...
Off the 3 official kitkat 4.4.2 roms I have tested, Switzerland & Poland & Baltic, I find the Baltic one the best.
At least I get to use kitkat before the BTU variant is released,as long as I use the official sam-mobile firmware, basically I can test the different country variants of the new kitkat 4.4.2 without fear of tripping knox, and I still get the OTA updates.
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Before update...
After update...
But here you don't see the CSC.You must install phone info and there you can see what country you have.
orly_mihai said:
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Click to expand...
Click to collapse
Hi orly.
Didn't see that, weird? why would an update change the CSC back to Poland, my CSC also shows N9005OXXENB1 and kies still says its an official version?
So to try to understand process I did a wipe cache and wipe data in recovery and it still shows N9005OXXENB1, so I re flashed Baltic ROM again and it now shows CSC N9005OXXENA5, now when I plug my note 3 into kies it says it wants to change it back
Just realised that the CSC has changed but both were the same XEO!
See screen dump.
Yes it's like mine.But the problem is that i have the Baltic CSC and now i have the Polonian CSC. Only with OTA update.
orly_mihai said:
But here you don't see the CSC.You must install phone info and there you can see what country you have.
Click to expand...
Click to collapse
To see CSC put in *#1234# in phone dialer
I will flash the Switzerland ROM again after tea and report back, I am guessing that the first kitkat ROM you flash is the CSC you get stuck with unless you root, and the CSC variations are only small software programs that are country specific like the Switzerland ROM. As I flashed the first official Poland ROM I am stuck with XEO.
The core features like like say having 4G in settings are ROM specific not the CSC files, which is why I swapped between all the 3 kitkat versions I have tested..
My first rom was a baltic 4.3 with that one i bought the Phone.First time i have Baltic CSC then uk CSC after flash i made a full wipe and then Netherland CSC. I verify in kies3.
Phew..
So I flashed the Switzerland ROM again and my CSC is now N9005PHNENA2, I tried hard reset from menu and hasen't changed, plugged into pc for kies and says its latest? So I was wrong you can change the CSC it appears?
Which is great as I am waiting for the BTU variant this month hopefully.
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
orly_mihai said:
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
Click to expand...
Click to collapse
Hi orly.
No my Knox fine, as long as I use official 4.4.2 ROM's. Now on latest Poland ROM.
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
SPYRO80 said:
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
Click to expand...
Click to collapse
I have never been rooted on my Note 3, and I only flashed official firmware from samfirmare.com, not posted ones on XDA just in case, I use odin 3.09
You can see from my previous screen dumps while I flashed different variants this week, and I include a screen shot from my note 3 as of today with the latest Poland ROM.
I've flashed Official Poland 4.4.2 Feb 2014 too... just curious can you install an application from APK files ? I seems having problems not able to do it short while after Factory Reset... already enable in setting thou but still the Install bar can't be click...
? SM-N9005 @ Tapatalk ?
Yes you can.But first you must enable from settings unknown sources.Everything it's ok no wifi drop or something else sayed somebody.
New Poland ROM has same problems for me as first Poland release, i.e.. screen off f-ups and wake lock problems, phone does random lock ups when switching screen back on, and no buttons seem work for a few seconds and screen blank, capacitive buttons sometimes light up? I had to hold power button down for 10 seconds once to get a re boot!
So I am flashing back to the Baltic ROM again.
I've tried flashing BTU - the SIM free firmware - with ODIn, and whilst it seems fine, updates don't seem to work. I have factory reset after every flash yet still software updates don't work. I know this because the version of BTU firmware I flashed was at least three versions old. When I check for updates I just get 'your software is up to date' - yet there are at least three newer versions of BTU on Sammobile.
The only thing I can think is that the low-level Computrace software that Samsung allegedly puts in their firmware is messing with the updates server. I know that Computrace still exists in the App Manager when I flash BTU. I've also just flashed 5.1.1 and it's still there.
I'd like to know if anyone with an EE S6 has managed to successfully get updates after flashing to a stock ROM, or if EE have crippled it. I wouldn't mind using EE's firmware as there is next to no bloatware; but their updates are horribly slow.
I should point out that I have never rooted the phone and the KNOX counter is not tripped. I've only ever flashed official firmware.
Thanks.
It could be your CSC is still pointing to EE and not BTU?
Nope, CSC shows as BTU when I boot into recovery.
Hi!
A few months back, I installed the leaked version of the Edge lollipop fw leak on my German Note Edge, basically turning the 915FY into a 915F - which didn't trigger Knox and everything worked fine.
Now 5.0.1 is officially out in Germany (and the 5.1.1 OTA hopefully arriving relatively soon), I tried to turn the phone back to its original state. So I downloaded the 5.0.1 fw from sammobile and applied the tar to the PDA part. After a few minutes, the phone rebooted, updated the apps and the model number changed back from 915F to 915FY.
Today, it requested a security guideline update but failed during the update procedure. I had a closer look what might cause the issue. Booting into the download mode, I can see that Knox still says 0x0 (so that's good), booting into the stock recovery and it says 'multi-csc and then csc: SER' on the bottom, with SER standing for Russia.
So despite updating the PDA-part of the phone, I must still have some remains of the older firmware on it. I can remember that when I first installed the leaker version, I had several update files for the various parts of the phone, not just the PDA part.
So basically, what else do I need to install via ODIN to also turn the CSC back to Germany so the security guidelines can be updated and German OTA becomes available again?
Thanks in advance
Alex
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
kamranali44 said:
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
Click to expand...
Click to collapse
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
No updates on Smart switch
userName'dYa said:
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
Click to expand...
Click to collapse
I do not have root or custom recovery. I have downloaded the firmware from sammobile and checked that the knox warranty is not tripped over and the device status is still official.
MAX 404 said:
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
Click to expand...
Click to collapse
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Do you get any error?
userName'dYa said:
Do you get any error?
Click to expand...
Click to collapse
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
kamranali44 said:
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
Click to expand...
Click to collapse
Are these bug fixes for the country AND the carrier you are using
userName'dYa said:
Are these bug fixes for the country AND the carrier you are using
Click to expand...
Click to collapse
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
kamranali44 said:
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
Click to expand...
Click to collapse
Yes the carrier matters even for unlocked phones
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
Okay, in this case I think I will have to wait for O2 to approve them.
I thought the idea of having an unlocked phone from samsung is to use any sim and get updates directly from Samsung when they release it.
kamranali44 said:
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Click to expand...
Click to collapse
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
I was wondering the same and SergioA is right. I still have the DBT CSC although I was flashing the BTU Firmware. Thanks for clarification
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
So my S7(Sprint) running on G930U firmware will go back to Sprint Nougat firmware full of bloatware?
MAX 404 said:
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Click to expand...
Click to collapse
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
SergioA said:
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
Click to expand...
Click to collapse
My S7 DUOS FD and my wife's S7 F both recieved the Nougat OTA update DQB1 today, mine was originally CSC XSG (UAE) and mi wife's was CSC TTT (Trinidad And Tobago), and both were updated to CSC BTU Nougat Final release, changing the CSC to BTU (this will wipe out your memory in the process but for a newer OS version it is recommended). I had doubts about getting any OTA updates since my S7 is the FD version which does not exists as a BTU phone originally, but in the end I got the update.
Long story short, if you want to recieve OTA updates after sideloading firmware with ODIN with a different CSC, you should fully convert to that new CSC, otherwise you won't get the OTA's.
kamranali44 said:
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
Click to expand...
Click to collapse
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
If your using the btu version for UK phones, then how did you manage not to brick your phone? The UK phones do not have snapdragon, they have the Samsung chips.
MAX 404 said:
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
Click to expand...
Click to collapse
Thank you, you are a hero :good:. I did update via odin and installed it without losing any data.
As I have said I have previously (about a week ago) used the CSC file rather than HOME_CSC.
I have the Phone Info app, The Orignal CSC code is blank(is it normal?), Does this look normal as I have not checked the CSC before updating to android nougat. I have added a screenshot of it.
Hi all,
Yesterday I bought an S10e under the impression that it is sm-g970F.
Trying to flash Android 11 I discovered that it is actually sm-g970N.
Is there really a difference between them?
Should I be worried that some functions will be missing/unavailable?
Also, in the settings, it appears as g970F. How did the seller change it??
I have the same problem i tried to update the phone to the latest sm-g970f rom (figured if it's already installed it's possible)
And non of the roms flashed only when i decided to try latest sm-g970n rom it flashed however i bricked the phone and i have no idea what to do now.
almogkm said:
Hi all,
Yesterday I bought an S10e under the impression that it is sm-g970F.
Trying to flash Android 11 I discovered that it is actually sm-g970N.
Is there really a difference between them?
Should I be worried that some functions will be missing/unavailable?
Also, in the settings, it appears as g970F. How did the seller change it??
Click to expand...
Click to collapse
So after digging into the issue since i have the same problem here are my conclusions:
1. The phone is a Korean Variant G970N it is probably a renewed phone and not a new one.
apparently it's okay for an importer to take used phones (from Korea in this case) and replace all the cosmetics but of cause leaving the used MB.
Now here is what you should worry about, in order to flash the G970F Fixed Rom (there is no way you have updates) they used a Custom Kernel which means the phone was rooted and now Knox is tripped (this not reversible).
(Download Phone Info from play store and check knox if it shows 0x1 then your phone warrenty is void and some features won't be available any more for example - Samsung Pay).
So what should you do?
Well if you still have the option i would have demanded my money back!!
One thing that i am perplexed about is how in hell is this legal?!!!
If you no longer have this option or you want to keep the phone you have two option:
1. Flashing Korean Unbranded Firmware (KOO) which is pretty good it doesn't have bloatware or issues as far as i can tell, i only found one down side for it, the phone language selection is small but if you only need English (like any normal Human) then you are golden.
2. Keep the G970F ROM but bare in mind it will receive no updates and no security patches.
I am still looking for a proper way to flash G970F Firmware over G970N for now i haven't found any internet source that will confirm it's even possible.
So how did those importers\sellers did it, they probably flashed it with a Cellphone Lab Software (not Odin solution) and used a custom Kernel to fool Knox, like i said before this is practically a crime and i don't understand how can they sell used phones as new and get away with it!!!!
I had the same suspicions....
I'll try going to the lab that sold the previous owner the device and deal with them tho it looks like I just got scammed...
Sorry to bring this up again but I've just had an idea following JerryRigEverything's video:
What if I transplant SM-G970F components from a broken device that no longer works or in use in my SM-G970N which is supposedly new.
My N device is now bricked for some reason I couldn't solve, though my suspicion is that it has to do with incompatibility with the SIM card I use.
When my device did work, it worked great! ...besides battery issues that are most likely a result of the incompatibility aforementioned.
Will this work? If so, what components do I need? I already know I'll need the logic board but as seen in the video, there are several more antennas, should I just copy what Jerry did?
Vegetto32 said:
I have the same problem i tried to update the phone to the latest sm-g970f rom (figured if it's already installed it's possible)
And non of the roms flashed only when i decided to try latest sm-g970n rom it flashed however i bricked the phone and i have no idea what to do now.
Click to expand...
Click to collapse
Hi Vegetto,
I am from India and buy a galaxy S10e from UAE, It is showing G970F in the Phone's about but the problem is It is a G960N. Now, When I see in Sam Phone Info app there is Bootloader version - G970N, PDA Version - G970F, CSC G970F.
It is also a Knox tripped phone. Knox 0/1.
But if I see in Samsung code by typing in keypad *#12580*369#
it showing like all option in Odin:
BL: G970F
AP: G970F
CP: G970F
CSC: G970F
Does this means I can flash new Firmware on the list of SAM Mobile website, with G970F series firmware, It also showing in SAM Phone Info App that there latest firmware G970FXXSEFUL1/G970FOXMEFUJ2/G970FXXSEFUJ2.
I am in India right now.
Please help me, My email Id is -- [email protected]
It actually means you cannot flash SM-G970F the only roms you can flash are G970N.
Also if you want the phone to get security updates you must flash the original phones bootloader version, my suggestion download the G970N KOO firmware it's a global firmware. As for the knox it is tripped and there is nothing you can do about it.
Vegetto32 said:
It actually means you cannot flash SM-G970F the only roms you can flash are G970N.
Also if you want the phone to get security updates you must flash the original phones bootloader version, my suggestion download the G970N KOO firmware it's a global firmware. As for the knox it is tripped and there is nothing you can do about it.
Click to expand...
Click to collapse
How can I flash the original phone's bootloader version?
Where from I can download the original phone's G970N KOO Firmware and is it official Samsung Firmware?
How are they able to flash G970F? Is it custom Rom or do they use the original one?
I searched that my phone is using G970FXXS4BTB3 firmware which Vietnam XXV and same number found at https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/XXV/download/G970FXXS4BTB3/322678/ in an old update in 2020.
So see the attached screenshot, can I flash its latest version with odin. Of course, there is a chinese written in recovery mode installed when I go to its recovery mode for flashing with Odin.
I have a similar problem right now on my Korean S10E. Device is SM-G970N. I need it to be in Turkish. Only Themes item in Settings is in Turkish- very interesting- The rest is in English. App names are mostly Turkish Settings app name is in English.
The bootloader is unlocked but the phone is not rooted, Knox seems not tampered.
Could not start OTA update at first, I have upgraded a few versions from PC via Smartswitch. Just then noticed OTA also started downloading. The rest of the updates went on from the phone until upgrading to 12, there was a message like "All of the updates were not succesful." OTA update no longer responded. This time I turned back to Smart Switch. Update finished this time and finally I am at the latest version.
I only need Turkish in Settings. I used some ADB commands and an app called MoreLocale2. It did not work either. This has to be simple. Turkish exists. Keyboard is Turkish but not Settings. Quick links and most other things are strangely mixed English and Turkish.
How can I enable full Turkish?