This morning i have updated lock screen on my HTC one max 803s and now i cant unlock it cuse 0 is missing and enter arrow is not visible on screen. I have tried everything from restart to recovery and its still there. I use pin pasword not the pattern protection.
may i bump it?
G0rila said:
may i bump it?
Click to expand...
Click to collapse
are you rooted ?
Related
Hello,
I've been using my HTC Sensation for more than a year, but since monday I can't get it to work.
When I turn it on, a grey screen appears instantly and I can't do anything on the phone (see picture)
I was using CM 10.1 rom for a long time without any problem
Is that a software issue or a hardware issue ? I'm scared my phone had died...
can you enter recovery? "hold down power plus volume down" at the same time
I've tried many times but no, I can't enter recovery...
Maxioum said:
I've tried many times but no, I can't enter recovery...
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1239238
rzr86 said:
try this
http://forum.xda-developers.com/showthread.php?t=1239238
Click to expand...
Click to collapse
I tried this but it didnt change anything...
The screen is instantly grey when I start the phone and I cant enter recovery
Please, I really need your help because I need to know very fast if I have to buy a new phone...!
Maxioum said:
Please, I really need your help because I need to know very fast if I have to buy a new phone...!
Click to expand...
Click to collapse
Does it show the bootloader?
If not then probably it could be a hardware issue
Probably your digitizer is faulty
Sent from my HTC Sensation Z710e using xda premium
No bootloader... I absolutely have no screen and image
After I went to a repair store, they told me that the screen is broken.
They ask me 120€ (160$) to change it. Is it possible to buy a screen on internet and change it by myself ? (knowing that I never repaired a phone before and have absolutely no knowledge in doing it)
Can anybody answer me please ?...
up !
TAP TO WAKE ????
Hello Devs and Modders
I have a question for you all.
Yesterday i installed to TWRP Recovery 2.6.3.0 posted by @icoolguy1995 downloaded for this thread
http://forum.xda-developers.com/showthread.php?t=2410495
I wanted to install dark magic 4.2 on my phone using the new recovery, and during the installation and other process i noticed that the recovery got locked and a few seconds later the led blacked out as normal locking does.
Then to wake the phone i just need to tap the screen and the phone wakes up (i.e. screen get on):silly::silly::silly::silly:
No hard key is required to wake the phone during the twrp recovery, just a tap on the screen.
NOW my QUE is
Can we use this feature of TWRP 2.6.3.0 (TAP TO WAKE) to wake phone during the normal working.
I am completely a newbie.
But just a Query.
The Recovery is loaded before the phone boots (Plz correct me if i am wrong).
If recovery is not used then the phone first boots the kernel and then the phone (Plz correct me if i am wrong)
So if the recovery can wake the phone with a tap on the screen, may be the kernal can load some command to activate the feature on the phone normal usage. Just a hunch.
Please Dev reply
Whether its possible or not????????
subhashdas said:
TAP TO WAKE ????
Hello Devs and Modders
I have a question for you all.
Yesterday i installed to TWRP Recovery 2.6.3.0 posted by @icoolguy1995 downloaded for this thread
http://forum.xda-developers.com/showthread.php?t=2410495
I wanted to install dark magic 4.2 on my phone using the new recovery, and during the installation and other process i noticed that the recovery got locked and a few seconds later the led blacked out as normal locking does.
Then to wake the phone i just need to tap the screen and the phone wakes up (i.e. screen get on):silly::silly::silly::silly:
No hard key is required to wake the phone during the twrp recovery, just a tap on the screen.
NOW my QUE is
Can we use this feature of TWRP 2.6.3.0 (TAP TO WAKE) to wake phone during the normal working.
I am completely a newbie.
But just a Query.
The Recovery is loaded before the phone boots (Plz correct me if i am wrong).
If recovery is not used then the phone first boots the kernel and then the phone (Plz correct me if i am wrong)
So if the recovery can wake the phone with a tap on the screen, may be the kernal can load some command to activate the feature on the phone normal usage. Just a hunch.
Please Dev reply
Whether its possible or not????????
Click to expand...
Click to collapse
phone can't be locked in recovery mod, in your case the screen was off due to minimal timeout ,
hence when u tap the device sense touch and backlight come again,
" i noticed that the recovery got locked and a few seconds later the led blacked out as normal locking does."
are u saying that u got lock screen on recovery mod . it isn't possible.
correct me DEVS if wrong
shekhar1986 said:
phone can't be locked in recovery mod, in your case the screen was off due to minimal timeout ,
hence when u tap the device sense touch and backlight come again,
" i noticed that the recovery got locked and a few seconds later the led blacked out as normal locking does."
are u saying that u got lock screen on recovery mod . it isn't possible.
correct me DEVS if wrong
Click to expand...
Click to collapse
You are very much true. It was just slept due to minimum time setup (timeout). I have tries sweep2wake on my kernel but it doesn't work. Later I come to know that it's not possible to use sweep2wake on MTK SoC. I'm searching for some other solution. Hope to get the answer soon.
Sent from my GT-I9500 using xda app-developers app
andiroxu said:
You are very much true. It was just slept due to minimum time setup (timeout). I have tries sweep2wake on my kernel but it doesn't work. Later I come to know that it's not possible to use sweep2wake on MTK SoC. I'm searching for some other solution. Hope to get the answer soon.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
thanks sir ,
one more thing , any news for your upcoming projects :highfive:
I said locked as the screen gets lock after the time out set by me and after that I get a screen saying swap to unlock. All the features of recovery are in accessible when the screen is locked.
And you all for your replies.
Sent by Micromax A110 Subh_D
subhashdas said:
I said locked as the screen gets lock after the time out set by me and after that I get a screen saying swap to unlock. All the features of recovery are in accessible when the screen is locked.
And you all for your replies.
Sent by Micromax A110 Subh_D
Click to expand...
Click to collapse
That is default behaviour of twrp and there is no feature like awake on screen swap in twrp because screen never sleeps in recovery.
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 11:59 PM ---------- Previous post was at 11:40 PM ----------
shekhar1986 said:
thanks sir ,
one more thing , any news for your upcoming projects :highfive:
Click to expand...
Click to collapse
Will take a little time. Now a days I'm not well and can't sit on computer for a long. So you have to wait for a while till I get better.
Sent from my GT-I9500 using xda app-developers app
andiroxu said:
Will take a little time. Now a days I'm not well and can't sit on computer for a long. So you have to wait for a while till I get better.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
All the best sir
And get well soon
Hope to see u back in action . god bless u.
sent from :- Oh God where I am ???
I think "tap to wakeup" is possible but it will consume too much power as the touch sensor of screen requires to be turned on.
I'm a newbie. Correct me if I am wrong.
i just used autorec to install custom recovery and when i lock the screen and turn it back on the screen is all messed up and there's lines everywhere but i can still see the screen move when i swipe.. in order to get it to work i have to reboot the phone everytime...i have the d80020k software... any help is appreciated
MaestriFC said:
i just used autorec to install custom recovery and when i lock the screen and turn it back on the screen is all messed up and there's lines everywhere but i can still see the screen move when i swipe.. in order to get it to work i have to reboot the phone everytime...i have the d80020k software... any help is appreciated
Click to expand...
Click to collapse
wow sounds serious pal. I'd recommend a full reset to factory and unroot it.
MaestriFC said:
i just used autorec to install custom recovery and when i lock the screen and turn it back on the screen is all messed up and there's lines everywhere but i can still see the screen move when i swipe.. in order to get it to work i have to reboot the phone everytime...i have the d80020k software... any help is appreciated
Click to expand...
Click to collapse
I am having the same problem with my AT&T LG G2, did you figure out the solution?
i have the same problem any help
first of all i wanna tell you that my english is really bad
I have experienced black screen of death several times before and i've managed to recover from it by using key combination or my phone just recovers from it within 30 minutes when i haven't done anything but this time it is taking way too long and I'm not able to fix myself I'm on custom rom is there anyway to recover from black screen of death?
Hold the power button until it reboots.
thanks for replying but that doesn't work phone just vibrates and screen stays black i think phone is actually on but screen is not it even enters bootloader mode and i can do adb stuff on my pc
tmrasdf said:
thanks for replying but it when i do that doesn't work phone just vibrates and screen stays black it even enters bootloader mode and i can do adb stuff on my pc
Click to expand...
Click to collapse
If your can get into the bootloader I'd try flashing the factory image
Sent from my Nexus 5 using XDA Free mobile app
okay i will do that and give you an update about whether it fixed the problem or not
also can you guys give me some information about what causes black screen of death? i've searched on the google and was not able to find proper answer about it
jd1639 said:
If your can get into the bootloader I'd try flashing the factory image
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
it doesn't work i didn't have lollipop factory image so flashed kitkat and my screen is still black
tmrasdf said:
it doesn't work i didn't have lollipop factory image so flashed kitkat and my screen is still black
Click to expand...
Click to collapse
Then I'm afraid it's a hardware problem.
Sent from my Nexus 5 using XDA Free mobile app
tmrasdf said:
it doesn't work i didn't have lollipop factory image so flashed kitkat and my screen is still black
Click to expand...
Click to collapse
Does the screen function in bootloader? If not like jd said its hardware. Most likely the flex ribbon connection.
theesotericone said:
Does the screen function in bootloader? If not like jd said its hardware. Most likely the flex ribbon connection.
Click to expand...
Click to collapse
yeah i have just finished fixing it an was about to tell you guys that my phone is working now
i disassembled it and unplugged and replugged the cable beneath the speaker(ithe cable is connected to lcd so it might be the flex ribbon connection i have no idea) thank you guys for replying and helping me to solve this issue unfortunately,due to the downgrade my sdcard is erased and i lost my data but i'm glad that my phone is functioning properly :highfive:
Hello,
ive ran into a problem: my kid was playing with my android phone and set a pattern lock which he (obviously) doesn´t remember.
All my important data is backed up so i did a hard reset, but the phone is asking for the pattern even after resetting. I am now in a big trouble because i need my phone ASAP so i googled for advice and found out about this forum.
I tried multiple guides i found here but everything was unsuccessful.
My phone is NOT rooted, USB debugging is OFF.
Is there a way i can save my phone?
Thank you
What's phone's brand/model?
jwoegerbauer said:
What's phone's brand/model?
Click to expand...
Click to collapse
Asus Zenfone 3 Max ZC553KL
Bump, is there any hope that i can fix my phone or is it gone ?
K3vlar159 said:
Bump, is there any hope that i can fix my phone or is it gone ?
Click to expand...
Click to collapse
Watch this video:
jwoegerbauer said:
Watch this video:
Click to expand...
Click to collapse
thank you i really appreciate your help but i cannot find the files on the website in description
bump
You can start mobile in recovery mode. Use volume and power button. Clear cache partition. Then you can start your mobile. I think pattern will be removed.
Mobilelearner said:
You can start mobile in recovery mode. Use volume and power button. Clear cache partition. Then you can start your mobile. I think pattern will be removed.
Click to expand...
Click to collapse
hi, already tried that, no luck :/
Bump,
i may be able to remove gestures.key file to remove the pattern lock but i need to turn on usb debugging
Do you know any way i could do that ?
bump
FIXED !!!
I figured out a way to change the pattern !
Guide for those with same problem:
A the beginning of the phone setup is a button for people with bad vision to turn on features that help with the setup.
Find Talkback and turn it on
Navigate to help and support and scroll until you find a video.
Tap on the video, it should open youtube, then find random video that has a link in the description.
Click the link to get into Chrome and search for apex launcher apk
Download apex launcher and open it.
Go through the setup and at the end it takes you to homescreen.
Go to settings and set a new pattern.
Restart the phone and now when it asks for pattern enter the one you just set.
Hope this helps someone like me