My brother installed cyanogenmod on this tablet, and i didn't like it, so i tried flashing the GT-P1000 stock firmware via ODIN. It didn't brick but it wasn't the right firmware so i tried going back to cyanogenmod and i bricked it. It doesn't turn on if i hold the power button and once i plug it onto the charger it gives me a blinking PHONE ------!------ COMPUTER screen, and i can't get into downloading mode or recovery mode the only option i have is to press POWER+VOL UP+VOL DOWN and a screen which shows "Power reset or uknown upload mode" appears.
How can i solve this? Do i just wait for it to charge completely and try flashing a pit via ODIN?
Any help is appreciated
Hi there,
You'd be best served asking for help from the experts who own your device, here:
Galaxy Tab Q&A, Help & Troubleshooting
Also please see this FAQ: [Questions] & [Answers] For (Nearly) All Your Galaxy Tab Problems.
Good luck
Related
My sim card wasnt working and to fix that i decided to format my phone by flashing Stock ROM using Odin [I had root], running on Cyanogenmod. While doing so, it was taking a hell lot of time and I didnt know what to do, so i pulled the cable and restarted the phone and this message came on: "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
So i did that using kies, followed the procedure..downloaded the firmware to the computer, blah blah, but while "transferring that to the mobile phone" procedure, it got stuck at 0% and for hours it wont move!!
I tried using Odin again, but it just dont work!!
Please help me!!..I cant even go to my phone now..my (Home + Power button + Volume down) is accessible, but not recovery.
Hi,
Asking here in this help thread in your device section would be best,
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting > [HELP THREAD] Galaxy S3 Ask any question
A couple ideas too.... Try a different version of Odin. Also, Odin usually fails if Kies is running. End all kies processes in the task manager on the pc. Try a different cable and USB port on your PC. And forget kies, it won't work if your rooted or are not completely stock.
Again, for more help, ask in the thread I linked above.
Good luck!
Thank you. Thread closed.
I installed a stock rom for my Galaxy Tab 7.7 (P-6800) and it was stuck at the flashing SAMSUNG logo (the one with the tune) and so I juct left it there and went to sleep. The next day I tried turning on the tabalet but it didn't work so I booted into Download Mode and did a NAND erase. I was planning to install a stock rom from SAMMOBILE but now I can't boot into Download Mode. When I try to, it goes into the warning screen and after a second or so, it becomes black. I figured it could have been out of battery or a button is broken. I have tried charging the tablet with wall charger (2.1A) but it doesn't seem to work. I could occasionaly get it succesfully into Download Mode but it will turn off itself for no reason.
THERE IS NO OS INSTALLED SO DON'T TELL ME TO GO THE TERMINAL OR ANYTHING. IT IS ABSOULUTLY EMPTY ONLY HARDWARE AND DOWNLOAD MODE.
Anyways, please help. I am trying to get daniel_hk's cyanogen mod on this for my friend and I don't think he would expect me giving a bricked tablet to him.
Hi there,
All you need for recover your stock firmware is in this threads:
[GUIDE] Flash Official JB 4.1.2 Firmware on P6810 Wi-Fi Device
[GUIDE][Noob-Friendly][adb] How to avoid Superbrick // How to revive your bricked Tab
Need ics/jb stock rom for galaxy tab 7.7?
For more/other questions please register an account on XDA and ask directly here:
Galaxy Tab 7.7 Q&A, Help & Troubleshooting
Good luck
Hi guys have a bit of a problem with my tab,
I have tried to factory reset it as it was running slow. (never been rooted or touch from standard) and it has just sat me on a "Downloading... Do not turn off target" screen, for the past 15 hours!!
I have tried holding power button + Volume Down to get into a recovery mode but screen just flashes then pops up with the same message.
I have been looking through the internet at loads of different posts trying different things with no joy. Only hoping that with the post being relatively old now someone may have a new way to fix this issue.
Okay here is what i have found out to help anyone help me...
It is not connecting to Kies it registering a device there but eventually pops up with a message saying "device taking to long to respond".
It is registering in device manager (see picture)
Have tried to use one of the guides from here to go through Odin and upload Rom to it,
this is the rom i used : N8010XXUDNE4_N8010BTUDNF1_HOME.tar.md5
When it was going through it said Failed to partition.
Did some more googling and searching and found a PIT file and tried again.
This failed.
Completely stuck now don't no what to do so any help would be great.
Hi there,
You'd be best served asking for help from the experts who own your device here:
Galaxy Note 10.1 Q&A, Help & Troubleshooting
First read this thread: Guide - Installing Firmware, CWM recovery & Rooting
Good luck
I'm just getting started trying to root my Galaxy Tab S SM-T700, and I have run into a couple problem.
I have installed the USB drivers from Samsung, and I have downloaded and extracted CF_AutoRoot to my desktop.
Now the website I was using to tell me how to do it says that next I need to download the CWM Recovery Image, which brought me to this site.
When I click the link to download it, I get a blue/purple screen saying Access Denied.
Also it says that I have to enter download mode on my Tab S by powering down, then turning it back on holding the power_volume down buttons, and this does not seem to work, it just turns on, but it stays on the powering on splash screen until I release the buttons, and when I release the buttons, it just powers on like normal.
I was going to link a screen shot of the Access Denied thing, but this forum will not let me.
Hi,
Try posting your question here:
Galaxy Tab S Q&A, Help & Troubleshooting
The experts there may be able to help.
Hello everybody, since few weeks, i found that my Smartphone wasn't detected by any computer when i'm using USB, it was charging but nothing more.
I tried to restore it but it failed, so now i can't boot anymore on system. Odin never detect it.
Only things i can do with the phone is rebooting in download mode and recovery too, i can't flash it cause of USB.
Sure i've already tried to uninstall drivers, reinstalling, changing cables, but nothing changed.
Smartphone is a G920F Samsung Galaxy S6.
If there is any solution to kick his ass back, let me know .
Hi there and welcome to Assist,
Try this:
Power down your phone completely, boot up in download mode (power + home + volume down).
Open Smart Switch and click on "More" on the right upper side of the window, "Emergency software recovery and initialization".
Click on the "Software update and initialization" tab.
Insert the model of your phone, e.g. SM-G920F and click search.
Now insert the S/N of your phone. You can see it on the bottom back of your phone. Click confirm and it will Download the latest stock firmware for your phone.
From this point on it's self explanatory. You have to be patient because it's a long process.
You'll have to create an account to post in the main forums.
> Samsung Galaxy S6 > Galaxy S6 Q&A, Help & Troubleshooting
Good luck