Since The Pantech Breakout does not have it's own forum I'm posting here.
NOTE: Following These steps you can easily root your Pantech Breakout even if you are a Windows 8 user with no compatible drivers available for your PC.
I did this to a Pantech Breakout using my Windows 8.1 laptop, no drivers used, worked perfectly!
Files Needed:
-BreakoutAllinOnePkg.zip
-BreakoutRoot.zip
Files can be downloaded from:
https://code.google.com/p/breakout-all-things-root/downloads/list
INSTALLING CLOCKWORKMOD RECOVERY:
1- Unzip "BreakoutAllinOnePkg.zip"
2- Open RecoveryAIO
3- Type "1"
4- Press "Enter" & Hit Any Key
5- Continue to Rooting Device
----------------------------------
If you get the message:
Code:
Installing Recovery
Press any key to continue . . .
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
< waiting for device >"
That means your computer does not have compatible drivers for it.
You need to enter to fastboot manually.
Enter Fastboot Mode Manually:
A. Turn off phone and hold down back button
B. While still holding back button insert usb cable
C. Continue to hold back button until "android development mode" appears on screen.
D. That's it you are in fastboot mode.
Now Re-Do Steps 1-4 to complete CWMRecovery Installation.
(Advanced Users)
Optional You can Flash the "cwmrecovery.img" included in "BreakoutAllinOnePkg.zip" with ADB If you dont want to use the AIO Batch File.
----------------------------------
CWM RECOVERY NAVIGATION ON PANTECH BREAKOUT:
Volume Keys - Up/Down
Power Button - Back
Camera Button - Select
ROOTING DEVICE:
You Need to put "BreakoutRoot.zip" in your SD Card.
1- Boot Into Recovery (With the Phone Powered Off Hold the Search and the Power Button)
2- Install Zip From SD Card
3- Choose ZIP from SD Card
4- Select "BreakoutRoot.zip"
5- Reboot! Enjoy =]
SAMSUNG GALAXY S4 - SUPPORTS ALL VERSIONS UP TO THE LATEST ANDROID BUILDS
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
SUPPORTED MODELS
INTERNATIONAL MODEL GSM [GT-I9500]
INTERNATIONAL MODEL LTE [GT-I9505]
US SPRINT MODEL LTE [SPH-L720]
US CELLULAR MODEL LTE [SCH-R970]
US C SPIRE MODEL LTE [SCH-R970X]
US CRICKET MODEL LTE [SCH-R970C]
US TMOBILE/METROPCS MODEL LTE [SGH-M919]
CANADA MOBIL, VIDEO, WIND LTE [SGH-M919V]
Click to expand...
Click to collapse
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports many Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit/Windows 10
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* [NEW] use SkipRoot boot image to Auto Root device, install Busybox Binaries and rename Recovery Restore files [selected devices]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Flash any part of a stock Nexus image to device [boot, system, recovery] – Great for fixing broken parts of firmware
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk’s to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
**Updates**
**FREQUENTLY ASKED QUESTIONS**
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to
send commands to your android device. For S-ON devices, this is crucial for
modifying files in the /system partition (where the rom sits) as you cannot modify
anything in /system when the rom is running without S-OFF like removing system apps.
------------------------------------------------------------------------------------
Q. I flashed Custom Recovery but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on certain Stock Android Builds that will
reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from Google
Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and
/system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery
it will NOT be overwritten after a reboot. You can also do this via the Toolkit.
------------------------------------------------------------------------------------
Q. My AntiVirus program says the Toolkit files may be harmful
The exe compiled files are not digitally signed with a Microsoft certificate (as
they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) may
pick it up as potentially harmful when it is not. They will pick up ANY file that
doesn't contain a purchased Microsoft certificate in the same way. Just Restore the
deleted file and exclude it from further scans and it will be fine. Or switch to a
better AntiVirus program such as BitDefender.
------------------------------------------------------------------------------------
Q. What is the difference between Nandroid and Titanium backup?
A NANDROID will backup the whole system including boot, system, data and recovery
partitions so you can restore a complete rom and all data and settings.
Titanium Backup is mainly used to backup apps and associated user data. These
could be restored AFTER a full wipe and a new Rom had been flashed on your phone.
The other option now which google added into the new adb command list is the adb
backup which is in the ToolKit and can do the same job as Titanium Backup but will
store the data on your PC rather than on the phone (which takes up space).
Q. I cannot find Developer options
With Android 4.2 google have thought it would be funny to hide the Developer options
screen in the Settings. This means you cannot enable usb debugging to communicate
with your device. To show the Developers options screen do the following:
1. Goto Settings, About and tap the Build number text 7 times.
2. When you have tapped 3 times you will be given a countdown of taps until you
become a developer.
3. Once you are told you are now a developer you can go back to the Settings
Screen and can see Developer options.
4. You can now go into Developer options and enable usb debugging.
Q. I am having trouble getting adb working with the drivers installed
Try switching your connection type from media (MTP) mode to camera (P2P) mode.
To do this open the notification area [top left] with the device connected via usb,
click where it says 'connected as' and change from MTP to PTP.
------------------------------------------------------------------------------------
Q. How to get into your Download Mode
1. Unplug your usb cable if you have one plugged in
2. Keep holding the Volume Down, Home and Power buttons until you see a warning
screen [about 10 seconds]
3. Press the Volume Up button to boot the phone into Download Mode
------------------------------------------------------------------------------------
Q. How to get into Recovery
1. Unplug your usb cable if you have one plugged in
2. Keep holding the Volume Up, Home and Power buttons until you see a green android
man on the scree [about 15-20 seconds]
Q. I tried to enter the code for the pro version but it says the code is incorrect
1. Make sure the code entered is for the correct Toolkit being used.
2. You need to start the Toolkit with the toolkit.exe file when activating so the
settings can be initialised or the code will not be accepted.
3. Make sure you enter the code correctly as the characters are case sensitive.
**if needed*
GREAT. Thank you for providing your tools to our device mskip
powered by Fingerbite Chocolate™
mskip said:
**if needed*
Click to expand...
Click to collapse
I think most of your pics are damaged...can they be repaired?
Sent from my GT-I9500
anu.cool said:
I think most of your pics are damaged...can they be repaired?
Sent from my GT-I9500
Click to expand...
Click to collapse
Sorry im not sure what you mean.
Mark.
mskip said:
Sorry im not sure what you mean.
Mark.
Click to expand...
Click to collapse
tapatalk shows images in first post are damaged ie can't be seen,broken links maybe.
Can they be fixed?
Sent from my GT-I9500
Thanks mskip, yours utilities are the best.
Enviado do meu GT-I9500
knox
if you do root the S4 with this process, active knox?
kraiioL said:
if you do root the S4 with this process, active knox?
Click to expand...
Click to collapse
bump bump:highfive:
kraiioL said:
if you do root the S4 with this process, active knox?
Click to expand...
Click to collapse
If you flash any custom image on a device with KNOX present then yes you will trip the knox flag.
Mark.
mskip said:
If you flash any custom image on a device with KNOX present then yes you will trip the knox flag.
Mark.
Click to expand...
Click to collapse
Works to root 4.4.2 official?
I need the phone in download mode? Recovery mode?
[SGS4]
KNOX S4
whether this method changes the root flag knox with 0x0 to 0x1
by far the best application i have used for a long time... whether rooting the phone or reverting to stock firmware. great piece of work.
i keep getting error when i try to install custom recovery ive tried both my wifes phone and mineim on 4.4.2
I installed the toolkit to do an ADB backup of Samsung Galaxy S4 M919 with Android 4.2.2 (already rooted)
PC system in Win7/32
After installing the Samsung USB drivers, and plugging in the USB cable, I can see that the ADB drivers are loaded. In Device Manager, The "SAMSUNG Android ADB Interface" is shown under Android Phone. Running "adb device" from the command line shows that the SGS4 is recognized.
However, the prompt about pairing with the PC never occurs. I thought maybe I had done it before, so I didn't worry about it since ADB was working. I selected ADB Backup in the toolkit using the -all -apk -system -noshared options.
The Full Backup function appeared on the phone, and I selected "Back Up My Data". The phone had not rebooted - the backup app is on top of the regular phone function and the status bar is still showing at the top. I did not enter a password.
Below the password field various apps are displayed one by one.
However the progress is unbelievably slow. After 30 minutes, only at 200 MB file is present in the backup folder. It hasn't increased in size for over 10 minutes.
This is the first time I've tried an ADB backup with the SGS4, but my previous phone would back up several Gbytes in about 15 minutes.
Is this process just very slow on the SGS4, or is something wrong?
so the Att SGH 1337 model is not supported by this toolkit?
thank you for this wonderful tool, makes things easier
HI Mark,
I just want to say THANK YOU for all of your toolkits!
I bought the OG N7 AND N7 2013 versions, and I (finally) have a SGS4 on the way and will be buying this toolkit as well when my i9500 arrives.
You have saved me a ton of time of trouble, and I plan on following your work down the road as well.
Thank you for making these available to us, and please keep up the great work... :highfive:
Note:
* I'm not responsible for any damages will be held! Do at your own risk!
* Rooted system on .PAC file
* Follow instructions!
* This will delete your installed user apps!
*Please Do a Full Wipe/Factory Reset Before Flashing Thanks
For:
* Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / Softbrick
Part One: Installing drivers
1. Extract the driver file.
2. Run dpinst.exe . Note that "x86" folder is for 32-bit computer while "amd64" is for 64-bit computer
3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager
4. Turn off your phone and remove the battery then insert back the battery again.
5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don't connect the USB cord to PC itself.
6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC.
7. A poped-up notification appear to show if the drivers are successfully installed.
8. You may now remove the USB cord to the PC if success but don't remove yet the micro USB cord to your phone.
9. Now, we are ready to use Research Download!
Part Two: Using Research Download
1. Extract Research Download file
2. Extract your downloaded stock ROM file
3. Run ResearchDownload.exe
4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click "Open" button.
5. Once the PAC file is loaded click play button .
6.Connect your Omega HD 3 (while holding volume down)
7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone!
Additional:
* After the first boot of your phone, your current internal storage is xxxGB. Before doing anything else like rooting, installing or flashing recoveries, go to Settings>Factory data reset>Factory data reset then tap Reset Phone then tap Erase everything. Your phone will reboot to recovery. Wait for erasing and it reboot automatically. After that, your internal storage restore to its default size
Links:
Final Firmware For Omega HD 3 V1 By Team YuniX [MIUI Recovery Recomended]
Click Here
Spreadtrum Drivers
Click Here
Research Download
Click Here
ATTENTION!! THIS IS REQUIRED!!!
Please Boot Into MIUI Recovery !
Todo..
Boot Into Recovery Mode hold "Power button +volume +"
Use Volume Kesys to Navigate "Wipe/Factory Reset"
Then Select "Factory Reset" and it to Finish.
Done
Credits
* Rafael A. Broas
* Vhin Cantalejo
* Dranreb Alcantara
* Ezra Ramos Monteclaro
* Team YuniX
* Mito A260
* Cherry Mobile Omega HD 3 / 3s
Thanks for Approve
Note:-
/* Your warranty is now void. */
* I am not responsible for bricked devices, dead SD cards.
Requirements
* 10 or G With Unlocked Bootloader >> If you don't know How to Unlock Bootloader -- Click Here
* A Computer
* Data Cable
* A Working Human Brain
Method -1 [Installing From Pc]
* Go to Settings >> About Phone >> Tap " Build Number " 7 Times to Enable Developer Options
* Enable USB debugging[/B] in Developer Options
* Extract Platform tools into a Specific Folder and Open Command Prompt or Terminal There
* Type Without Quotes " adb reboot bootloader " to go to Fastboot Mode
or to go to Manually >> Turn Off Device >> Press both Volume Down and Power Button >> Release When 10or Logo appear
* Type Without Quotes " fastboot devices " to know your device in Fastboot Mode or not
* Place the recovery in platform tools and rename as recovery.img .
* Type Without Quotes " fastboot flash recovery recovery.img " to flash Custom recovery
* To Reboot to Recovery Mode by press Volume dowm button twise and press power button[If you are in Fastboot Mode ]
Method-2 [Installing From Device] [TWRP required]
* Reboot to Recovery By >> Turn Off Device >> Press both Volume Up and Power Button >> Release When 10or Logo appear
* In TWRP , Go to Install >> Select recovery.img >> Select Recovery Partition to Flash >> Swipe to Flash
* To boot into new recovery ,Go to Reboot >> Select recovery
*It's Done:good::good:
Downloads
* Download TWRP > > Get Here
* Download adb&fastboot drivers>> Get Here
* Download Platform Tools >> Get Here
Contributors:-
*DhirajMS
Xda Page
Github
Donations:-
To support future projects Donate
DhirajMs UPI id : [email protected]
Jion 10 or G Groups - Telegram - Whatsapp
For any Doubts feel free to Contact Me
If you like My Work Don't Forget To :fingers-crossed:Thank me:fingers-crossed:
Last Updated 25-11-2019
#Reserved
Thank-you
after flash dolby atmos my phone has dead.
Edl boot fail. Stock rom flash by fail.
what to do enyone tell me.
hai i have a doubt
I'm afraid assume u have rooted ur phone using this method and twrp also ... Ok
I know there is a hide option to gpay and phone pay to work..
But in some rom even if u hide the G pay won't work that's way I am asking after flasing any one tried online line payment?
Is it passing SafetyNet check?
Goutam NB said:
I'm afraid assume u have rooted ur phone using this method and twrp also ... Ok
I know there is a hide option to gpay and phone pay to work..
But in some rom even if u hide the G pay won't work that's way I am asking after flasing any one tried online line payment?
Is it passing SafetyNet check?
Click to expand...
Click to collapse
Thanks for........
As per My knowledge,
If hide in magisk
Magisk manager hides super user permission
But payment apps still can identify magisk manager is installed on that device.
So goto settings in magisk manager >> Hide magisk manager with random name
This will works best.....
?????
[email protected] said:
after flash dolby atmos my phone has dead.
Edl boot fail. Stock rom flash by fail.
what to do enyone tell me.
Click to expand...
Click to collapse
Try flashing in edl mode.
Device is not turning on , or fully dead , or hard brick
Try contacting 10 or Customer service
They can help U
-Bringing to you Ressurection Remix nougat for Lava R1s
-NOTE: This ROM is only build for LAVA R1s, Which is non-camera, non-gps version of Lava R1. It is not meant for Lava R1.
-NOTE: I am not responsible if you phone bricks or your data is lost.
-NOTE: This ROM needs to be flashed using SP Flash tools
-Thanks to all earlier MTK devs who made it easy to compile ROM for Lava R1s.
Download ROM https://github.com/maniacx/Lava-R1s-ROMs/blob/RR-N-v5.8.5-08-Aug-2020/Ressurection_remix.zip
Instructions:
Lets Backup your ROM. It is a bit time consuming but it is worthed.
Overview
Step no 1: Install MTK VCOM drivers
Step no 2: Install SP_FLASH_TOOL 5.19.24
Step no 3: Backup your current ROM. (Long process)
Step no 4: Installation of ROM.
Detail intructions
1. Install MTK VCOM drivers (On you PC/Laptop) if not already installed.
* Download VCOM drivers for Windows 10 for -> https://androidfilehost.com/?fid=962021903579482090
* Extract it to a folder.
* Go to Device Manager.
* Click on the name of your pc/LAPTOP
* Right-click on the name and select "Add Legacy Hardware".
* A new wizard will pop up. Just click on "Next".
* Select "Install the hardware that I manually select from the list (Advance)" and click "Next".
* From the long list in the following screen, just select "Show All Devices" and click "Next".
* Click on "Have Disk" in the following window and select the file "Windows 10 x64 MTK USB Drivers.inf" for 64bit Windows 10
(Note: Most PC are 64bit but if you are using 32bit version, Select "Windows 10 x86 MTK USB Drivers.inf")
* Click "Next"
* If asked for security warning select " Install Anyway"
Alternatively you can watch this Youtube video of how to install MTK VCOM drivers
(You can skip few instruction and start watching from 4:09 till the end)-> https://www.youtube.com/watch?v=T0n9dXZb6xo
2.Install SP_FLASH_TOOL 5.19.24
* Download SPflash tool for windows. https://spflashtool.com/
* Extract the SP_Flash_Tool_v5.1924_Win.zip in a folder.
* Open the file "option.ini" in Notepad. Under [Readback] change the text "ShowByScatter=false" to "ShowByScatter=true" and Save.
3. Backup your current ROM.
* Create a folder to backup ROM. Lets name it "Backup_lava_r1s"
* Download the file "LAVA_R1S_Android_scatter.txt" and copy is in the folder "Backup_lava_r1s"
* Run the SP_FLASH tool from the folder you have extract the files by double clicking "flash_tool.exe"
* You will automaically shown the screen tab for Downloads. For "Scatter-loading File" Choose "LAVA_R1S_Android_scatter.txt" in your backup folder "Backup_lava_r1s".
* Click on "Readback" tab. You will see of table with a list of partitions on the device.
* Double click on "preloader". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "preloader_lava6737m_sp504_int.bin". Then Click "OK".
* Double click on "preloader". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "preloader_lava6737m_sp504_int.bin". Then Click "OK".
* Double click on "pgbt". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "pgbt". Then Click "OK".
* Double click on "procinfo". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "procinfo". Then Click "OK".
* Double click on "nvram". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "nvram". Then Click "OK".
* Double click on "protect1". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "protect1". Then Click "OK".
* Double click on "protect2". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "protect2". Then Click "OK".
* Double click on "lk". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "lk.bin". Then Click "OK".
* Double click on "para". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "para". Then Click "OK".
* Double click on "boot". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "boot.img". Then Click "OK".
* Double click on "recovery". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "recovery.img". Then Click "OK".
* Double click on "logo". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "logo.bin". Then Click "OK".
* Double click on "expdp". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "expdb". Then Click "OK".
* Double click on "seccfg". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "seccfg". Then Click "OK".
* Double click on "oemkeystore". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "oemkeystore". Then Click "OK".
* Double click on "secro". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "secro.bin". Then Click "OK".
* Double click on "keystore". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "keystore". Then Click "OK".
* Double click on "tee1". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "trustzone1.bin". Then Click "OK".
* Double click on "tee2". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "trustzone2.bin". Then Click "OK".
* Double click on "frp". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "frp". Then Click "OK".
* Double click on "nvdata". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "nvdata". Then Click "OK".
* Double click on "metadata". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "metadata". Then Click "OK".
* Double click on "system". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "system.img". Then Click "OK".
* Double click on "cache". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "cache.img". Then Click "OK".
* Double click on "userdata". It will ask you the folder location and file name for the partition to be saved.
Choose folder Backup_lava_r1s and give file name "userdata.img". Then Click "OK".
*Tick all the partitions. preloader,pgbt,procinfo,nvram,protect1,protect2,lk,para,boot,recovery,logo,expdp,seccfg,oemkeystore,secro,keystore,tee1,tee2,frp,nvdata,metadata,system,cache,userdata
* Now Power off your lava R1s. Disconnect Mobile from Laptop/PC if connect using USB.
* Click "Readback" button.
* Connect your lava R1s to you PC using USB. It will start transfering paritions files to the PC in Backup_lava_r1s folder. Wait for transfer to complete.
Thats it. Keep these files safe, so that you will be able to restore original StarOS ROM for Lava R1s.
Alternatively you can watch https://www.youtube.com/watch?v=KRnz4iu85aE
4: Installation of ROM.
* Downloads the ROM file.
* Extract it to a folder "RRemix"
* Run the SP_FLASH tool from the folder you have extract the files by double clicking "flash_tool.exe"
* You will automaically shown the screen tab for Downloads. For "Scatter-loading File" Choose "MT6737M_Android_scatter.txt" in your backup folder "RRemix".
* Make sure the following are ticked for download on the phone boot,recovery,system,cache,userdata.
* Now Power off your lava R1s. Disconnect Mobile from Laptop/PC if connect using USB.
* Click on "Download" button.
* Connect your lava R1s to you PC using USB. It will start transfering paritions files to the phone. Wait for transfer to complete. This will install Ressurection Remix ROM and TWRP recovery.
Now you can start you Lava Phone and enjoy ressurection remix.
Alternatively you can watch this video https://www.youtube.com/watch?v=aht7Ey6WyNg
5. Installing Gapps or Magisk.
* Boot into TWRPrecovery but turning off your phone. Hold "Volume UP" buttton and "Power" Button until the device give an 3 option to choose between Recovery, Fastboot and Normal.
* Use "Volume Up" button arrow to move pointer to "Recovery" and press "Volume down" button to boot into TWRP recovery.
If you want to install Gapps, visit https://opengapps.org/ and select ARM64, 7.1, pico and download and copy to your phone when in recovery using USB cable.
install gapps
If you want to install Magisk, visit magisk site and download "Magisk 20.4" and copy to your phone when in recovery using USB cable.
install magisk
Unfortunately as reported by CarlosSprekeslen , Bluetooth fails. as one file went missing probably during compilation or during zipping the rom.
To fix bluetooth
1. Download the attached zip file "Bluetooth_fix.zip" on you sdcard
2. Reboot to TWRP recovery
3. Install the zip
4. Reboot
How to install TWRP in Lava_R1s no camera?
R1as said:
How to install TWRP in Lava_R1s no camera?
Click to expand...
Click to collapse
To install TWRP only.
Download magisk zip (installer fir recovery) and save in you phone
Follow instructions step 1 to 3 on the first post.
Step 3 is important as it will backup your starOS rom.
And follow modified step 4 below
4: Installation of recovery.
* Downloads the ROM file.
* Extract it to a folder "RRemix"
* Run the SP_FLASH tool from the folder you have extract the files by double clicking "flash_tool.exe"
* You will automaically shown the screen tab for Downloads. For "Scatter-loading File" Choose "MT6737M_Android_scatter.txt" in your backup folder "RRemix".
* Make sure the only recovery is ticked for download on the phone .
* Now Power off your lava R1s. Disconnect Mobile from Laptop/PC if connect using USB.
* Click on "Download" button.
* Connect your lava R1s to you PC using USB. It will start transfering paritions files to the phone. Wait for transfer to complete. This will install TWRP recovery only, without removing Star OS
!!! IMPORTANT Step.!!!
Power off and boot in recovery by holding power button and volume up button.
It will boot into TWRP recovery. Install magisk.zip
!! NOTE !!
After flashing using SP tool in step 4, If you do not boot in recovery the first time, and/or if you do not install magisk, It will make your phone not bootable. And you might have to restore all partition that you backed in step 3 which is very time consuming