Database Info

[Q] Help! Xperia X8 stuck at "Android is Upgrading.... Starting Application"

[Q] Help! Xperia X8 stuck at "Android is Upgrading.... Starting Application"
After flashing paul xxx's cyanogenmod 9 into my xperia x8, it became bricked!
Xrecovery and cwmod wont startup! too
I really need help please!

Same here
I tried it also and it bricked mine also Please I need help, I try to get back into Clockwork Mod and yet it still wouldn't get into it :/ any fixes around?

Same here
same here not even Flashtool will help .... heeeelp somebody

Found a solution
Hi guys, I found a solution .
After - I do not remmember how many times, It worked with Flash tool.
Here see the proces (its not my - just found it ):
"HowTo: Unbrick the Sony Ericsson Xperia X8
Recovering the Xperia X8 from a soft-brick situation is actually not that
hard...
"Soft-brick" means that your phone isn't fully dead. For as long as it shows
some sign of life, for example the white "Sony Ericsson" boot logo or the
charging graphics when you plug the USB cable into the charger, you can use
the method below to restore the default Sony Ericsson Android OS (also called
"ROM") on your phone.
Restoring the default ROM may also solve some other problems. For example, if
you flashed a custom ROM and you suddenly have severe issues with your WiFi
functionality you can't resolve flashing back the genuine ROM can bring things
back into order.
Note that if your phone doesn't turn on anymore (the green LED does not light
up) you can't restore the device this way. This is a hard-brick situation
where only Sony Ericsson or a repair shop having a JTAG RIFF Box are able to
breath new life into your phone.
Requirements:
Oracle Java Runtime Environment
http://www.oracle.com/technetwork/java/javase/downloads/index.html
If you're on a 64-Bit Windows Edition you NEED to have the 32-Bit JRE
installed!
Android Device Drivers
Should already be installed in case PC Companion got installed on your system.
If not, you need to install 'Gordon's Gate' which comes with Flashtool (see
below).
Starting the process...
* Download Flashtool 0.2.9.1
http://www.mediafire.com/?123ial2dza5u5hu
Extract to C:\Flashtool
NOTE: I don't use Flashtool 0.5 intentionally. Flashtool version 0.5.0.0
through 0.5.2.0 failed to recognize the phone.
If you don't have the Android drivers installed on your system it's the
right moment now to install Gordon's Gate. Simply run ggsetup-2.2.0.10.exe
in C:\Flashtool\drivers and follow instructions.
* Download Android 2.1.1.C.0.0
http://www.mediafire.com/?eca0sualnao4c4c
Copy the "X8_2.1.1.C.0.0_generic.ftf" you just downloaded INTO the firmwares
directory inside the Flashtool directory.
* Make sure your phone is DISCONNECTED from the computer and turned OFF!
* Now start the X10FlashTool.exe in C:\Flashtool
* Plug the USB cable into JUST your phone (NOT into the computer!)
* Click the "Flash" button and select "X8_2.1.1.C.0.0_generic.ftf" you just
copied into the C:\Flashtool\firmwares directory
* In the next window don't do anything, just click "OK"
* Flashtool will show you a window about what you have to do:
- PRESS and HOLD the BACK button of your phone
- Connect the USB cable to your computer. Keep the button PRESSED!
- If Windows is about to install the "SEMC Flash Device" driver - let it
do its job. Keep the button PRESSED!
- Once you see that Flashtool started to flash (the progressbar on bottom
of Flashtool's window started to move) you can release the back button
of the phone
* Patiently wait until flashing finished
* Now, as Flashtool will tell you... disconnect the phone and turn it on.
BE PATIENT - the first boot can take a few minutes!
Once the phone booted up...
* Enable "Unknown Sources" and "USB-Debugging" in your phone's settings
* Connect the phone back to the computer
* Press the "Root" button and let Flashtool root the Droid
A automatic reboot will follow!
Once the phone finished rebooting...
* Press the "Ask root perm" button and look at your phone.
You will get a popup from Superuser to grant su permissions.
Confirm the request!
* Now click the "xRecovery" button to inject xRecovery into your phone.
* Done.
If you don't want to stick to the original ROM you can now continue with
flashing a custom ROM of your choice. While there's a bunch of custom ROMs
available I'll provide how to flash FroyoPro or GingerDX as an example below.
Flashing FroyoPro (Android 2.2)...
* Download the latest version of FroyoPro
* Copy the ZIP file onto your phone's SD card
* Reboot your phone into xRecovery
Either reboot to xRecovery from Flashtool OR reboot your phone normally and
keep on pressing the BACK button once the Sony Ericsson logo appears to get
into the recovery
* Flash FroyoPro
* Full-Wipe ("Factory Reset")
* Reboot into FroyoPro
NOTE: If you get a boot-loop (the phone resets and starts to boot-up anew)
while the animated FroyoPro logo is being displayed you forgot to Full-Wipe
your phone in CWM before the reboot.
Flashing GingerDX (Android 2.3)...
* Download GingerDX v013
http://www.mediafire.com/?8qag7k8h1hc4z2u
* Download the latest version of GingerDX AND
download the 'Modules for Stock Kernel' addon
http://forum.xda-developers.com/showthread.php?t=1188486
* Copy ALL THREE ZIP files onto your phone's SD card
* Reboot your phone into xRecovery
Either reboot to xRecovery from Flashtool OR reboot your phone normally and
keep on pressing the BACK button once the Sony Ericsson logo appears to get
into the recovery
* Flash GingerDX v013 in xRecovery
* Reboot
* Keep on tapping onto the screen once the Sony Ericsson logo appears to get
into ClockworkMod recovery
* Flash the latest version of GingerDX in CWM
* Flash the Modules for Stock Kernel addon in CWM
* Full-Wipe ("Factory Reset")
* Reboot into GingerDX
NOTE: If you get a boot-loop (the phone resets and starts to boot-up anew)
while the animated GingerDX logo is being displayed you forgot to Full-Wipe
your phone in CWM before the reboot.
"

[Recovery+Backup+Root] Walton Primo C1

Cautions:
1.your warranty is now void.
2.do this at your own risk.
3.read the whole post before starting.
Flashing CWM recovery and taking backup :
1. Download the package and extract all files.
2. Extract the driver.zip located in drivers folder->1
3. Install the driver.if your OS is 64bit then install the x64 one.if the OS is 32bit,then the x86 one.
4. Open researchdownload application
5. Select the 2nd button with double cog sign.
6. Now a new window will appear like the screenshot attached.
7. Right click on the file name field.choose the files located in "Required files" folder of the package.
be careful here.Put fdl1 in fdl1 field,fdl2 in 2nd field and the recovery image(extract the "CWM-recovery-SC8810-nonpadded.zip") in recovery field. Then press the "OK" button.
8. Press the Start (Play) button in ResearchDownload -application (third button).
9. Turn off the phone.
10. Keep holding the "- volume" key. Without releasing the button "- volume" plug the usb cable
11. The process of CWM- burning should be started now in ResearchDownload-application and it will take approximately 1 Minute.
I think you can release the Vol.Button, but I had kept it nevertheless.
12. Wait until the CWM-flashing has been finished (A green sign will appeare and "Passed" will be shown in ResearchDownload- application window).
13. Remove the battery, wait 20 seconds. Put battery back and turn on the phone.
14. now hold the vol (-) and power button until the screen flashes (40 seconds or less or more) and now you are in the CWM recovery menu.
15. PLEASE make a full backup by the "backup and restore" option .make sure there's about 500mb free space in your micro SD card.
16. after the backup reboot the phone and PLEASE store the backup files in somewhere else..(the whole ''clockworkmod'' folder)
congratulation. you have done a full backup and flashed your CWM recovery.
Rooting device:
*don't do this.if u find that your backup size is lower than 250mb~300mb(slight +/- may occur)
1. download and put the "superuserandfullbackup.zip" in your micro SD card
2. power off your device.
2. Reboot to Recovery by holding volume (-) and power button until the screen flashes and recovery menu comes.
3. just go to "install zip from sdcard option and select the zip "superuserandfullbackup.zip"
4. flash it
5. reboot.
Advices:
Rooting is dangerous.so first make a full backup of your unrooted stock Rom just after flashing CWM.
Store the backup(size will be around 250mb~300mb(+/- ) in someplace safe.it's the life of your phone.If anything goes wrong,it's the only key to fix your phone.......be careful.........
Getting back your warranty:
Restore your stock Rom's backup.Then,flash the stock recovery(included in the package.find it in RECOVERIES folder),in the same way you've flashed the CWM.
good luck.and thanks for reading this.

[ROOT] Pantech Breakout [No Drivers Needed]

Since The Pantech Breakout does not have it's own forum I'm posting here.
NOTE: Following These steps you can easily root your Pantech Breakout even if you are a Windows 8 user with no compatible drivers available for your PC.
I did this to a Pantech Breakout using my Windows 8.1 laptop, no drivers used, worked perfectly!
Files Needed:
-BreakoutAllinOnePkg.zip
-BreakoutRoot.zip
Files can be downloaded from:
https://code.google.com/p/breakout-all-things-root/downloads/list
INSTALLING CLOCKWORKMOD RECOVERY:
1- Unzip "BreakoutAllinOnePkg.zip"
2- Open RecoveryAIO
3- Type "1"
4- Press "Enter" & Hit Any Key
5- Continue to Rooting Device
----------------------------------
If you get the message:
Code:
Installing Recovery
Press any key to continue . . .
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
< waiting for device >"
That means your computer does not have compatible drivers for it.
You need to enter to fastboot manually.
Enter Fastboot Mode Manually:
A. Turn off phone and hold down back button
B. While still holding back button insert usb cable
C. Continue to hold back button until "android development mode" appears on screen.
D. That's it you are in fastboot mode.
Now Re-Do Steps 1-4 to complete CWMRecovery Installation.
(Advanced Users)
Optional You can Flash the "cwmrecovery.img" included in "BreakoutAllinOnePkg.zip" with ADB If you dont want to use the AIO Batch File.
----------------------------------
CWM RECOVERY NAVIGATION ON PANTECH BREAKOUT:
Volume Keys - Up/Down
Power Button - Back
Camera Button - Select
ROOTING DEVICE:
You Need to put "BreakoutRoot.zip" in your SD Card.
1- Boot Into Recovery (With the Phone Powered Off Hold the Search and the Power Button)
2- Install Zip From SD Card
3- Choose ZIP from SD Card
4- Select "BreakoutRoot.zip"
5- Reboot! Enjoy =]

[SC7731][5.1] Starmobile PLAY Click Beta V1.0 By Team YuniX [Lava A59 Firmware Fixed]

Note:
* I'm not responsible for any damages will be held! Do at your own risk!
* Rooted system on .PAC file
* Follow instructions!
* This will delete your installed user apps!
*Please Do a Full Wipe/Factory Reset Before Flashing Thanks
For:
* Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / Softbrick
Part One: Installing drivers
1. Extract the driver file.
2. Run dpinst.exe . Note that "x86" folder is for 32-bit computer while "amd64" is for 64-bit computer
3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager
4. Turn off your phone and remove the battery then insert back the battery again.
5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don't connect the USB cord to PC itself.
6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC.
7. A poped-up notification appear to show if the drivers are successfully installed.
8. You may now remove the USB cord to the PC if success but don't remove yet the micro USB cord to your phone.
9. Now, we are ready to use Research Download!
Part Two: Using Research Download
1. Extract Research Download file
2. Extract your downloaded stock ROM file
3. Run ResearchDownload.exe
4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click "Open" button.
5. Once the PAC file is loaded click play button .
6.Connect your Starmobile Play Click (while holding volume down)
7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone!
Links:
[SC7731][5.1]Starmobile_PLAY_Click_V07_24052016_1464084103 Beta V1.0 By Team YuniX.7z [Lava A59 Firmware Bug Fixed]
Link: Click Here
Spreadtrum Drivers
Link: Click Here
Research Download
Link : Click Here
Bug: Boot Logo Size 480x800 original Size 480x854 [Cant Fix i have no proper tools]
Features?
All Stock Lava A59 Rom
Rooted Via SuperSU
TWRP Recovery Installed
Credits:
Lava A59 [Firmware]
Team YuniX [Porting] [Admin][Members]
Team Win Recovey Project
Klark Luis Fajardo Peralta [Guiding us from day 1]
Ezra Ramos Monteclaro [Team YuniX Member]
Castillo Monsale Ronnie
Mark Glenn
Google
XDA
ETC.
VIEW THIS PAGE FOR MORE UPDATES!!!!
Team YuniX

Sir bakit na bootloop phone ko sinunud ko nman ang Instruction peroo ayaw pa din sir I'm using new dev of ampc which is v10 pls we need the new firmware pls help

need md5 code boss.

Not Working
ayaw gumana pre gara ..
Bootloop ako
pero may back up ako kaya na restore ko agad .

Please make twrp recovery.img for lava a59

Leree Le 3 Stock Rom and Flashable Customized Firmware

Leree Stock Rom
https://mega.nz/#!F09XDIqS!clkk3-7aFjEWt4i_futDyGnSrmZ_Y9Nt4YQEMqpxaBk
1. Flashable thru TWRP, and thru the File Manager
2. Just for restoring the system.
3. NOT FOR BRICKED DEVICES
Customized Firmware3
HOW TO UNBRICK
*For the RED LIGHTS OF DEATH
# INFO #
1. Flashable thru miflash
2. CUSTOMIZED stock.
3. With root, viper4android, BusyBox, Facebook & Messenger, ES File explorer, Quick Reboot and many more.
4. Removed unnecessary apps from system.
5. Will not WIPE your internal storage and applications, so your files in it are safe.
6. CUOCO92 Advanced TWRP as recovery.
# REQUIREMENTS #
1.) MIFlash
- https://mega.nz/#!V58lmaZR!bf00enXY3ueeowrfMsV8SHZ-6QoQLJRfDDYp5j_v-Ew
2.) Revive Firmware
- https://mega.nz/#!QpFGVa5D!lYyA0yqcc99-ip2b8zIJ70_AHxocRqyvGMCLurYdppU
3.) Drivers
- https://mega.nz/#F!I81lTaZD!tcvEVP9syk0oCHaxeGdYrw
# INSTRUCTIONS #
1.) Extract REVIVE.zip preferably in a FOLDER on the desktop of your computer.
2.) Install miflash on your computer.
3.) Connect your phone to the computer while pressing and holding VOLUME UP AND DOWN BUTTONS for at least 3 seconds. You will then notice the LED LIGHT BLINKING IN RED. The RED LIGHTS OF DEATH.
4.) Go to your computers DEVICE MANAGER and look for QSHS_BULK with a yellow triangle on the side. Right click, and choose "UPDATE DRIVER". Search manually and look for the downloaded drivers from mega.
5.) Open MIFlash and click on refresh. You will then see a COM PORT if you installed the drivers correctly.
6.) Now press Browse and search for the FOLDER where you extracted the REVIVE.zip
7.) Click on FLASH.
8.) Wait at least 5minutes for the flashing to finish and your done. Remove USB Cable BUT DON'T TURN IT ON JUST YET.
9.) Press and Hold Volume Up and Power button for at least 4 seconds. Release the power button once the Leree Logo shows up on the screen.
10.) Once inside TWRP, go to WIPE and do a FACTORY RESET, this is to avoid conflict between the apps that you left in your data and the customized stock Firmware.
11.) Wipe DLAVIK CACHE
12.) REBOOT
# NOTES #
*Flashing with MIFlash may take a little longer depending your computer specs, so pls be patient.
*First boot will take atmost 25minutes, this is due to the system building it's DALVIK CACHE or what we normally see as "OPTIMISING APPS".
*This Firmware will not WIPE your DATA & INTERNAL STORAGE. So if you bricked your phone , you don't need to worry about the pictures you saved in your internal storage. But be sure to do the FACTORY RESET thru the installed TWRP