Database Info

[RECOVERY] ClockWorkMod 6.0.2.8 by Lucky76 Beta 1 x Acer Liquid Gallant Duo

ClockWorkMod 6.0.2.8 by Lucky76
Beta 1
X
Acer Liquid Gallant Duo E350​
PLEASE READ BEFORE CONTINUING CAREFULLY FOLLOWING LINES. THANKS
WARNING As always do not take any responsibility for any of your brick * Gallant Duo E350 Acer Liquid, then these steps at your own risk, and please be sure to perform them only after you understand what you do and you understand the meaning.
Any operating errors could affect the use of your smartphone forcing you to send it in for repair in service.
Flashing is a dangerous action and should be done very carefully.
This is Porting of the famous Recovery mod to version 6.0.2.8 beta for our device. Should be functional enough and if you notice bugs please report here so I'll try to fix.
Then you will see the installation guide that is identical to that of the root and at the bottom of this post the link to the complete package of PaulOBrien including recovery of my mod.
Big Thanks to Bruno Martins have compiled this Recovery from cyano 10.1 source and i have ported for us device Acer Liquid Gallant Duo.
WARNING
1. If you already have done the Root of your Gallant duo continued with the guide below.
2. If you have not done the Root of your Gallant duo passed through the post from Root and follow the guide then return to this.
Installation Guide ClockworkMod
Tips Pre Flash
1. Having your own device with charge battery to 100%
2. Please read the guide below can be at least a couple of times prior to start.
Follow the step by step guide below:
1. Have necessarily like the Windows operating system (tested by me with win 7 64 bit)
2. Download the pack with the tools in the link below
3. Unzip the zip file you just downloaded to a directory on your PC.
4. Turn off your Duo Gallant and remove the battery
5. Connect your Gallant Duo to your PC via USB cable
6. The Gallant will not be recognized so you'll have to manually install the drivers in the zip file you downloaded and depending on your operating system (XP, Vista, 7).
7. Once you have installed the usb drivers properly you can run the program for the Flash file via the "flash_tools.exe." Good start it as an administrator with the right mouse button.
8. You will see the first line of the program Flash Tools "Download Agent" automatically compiled.
9. Disconnect the USB cable from your Gallant Duo and keep it without a battery.
10. Now you have to upload the file "MT6575_android_scatter_emmc.duo.modaco.txt" created by PaulOBrien and you'll have to click on the button to the left "Scatter-loading."
11. When you will open the window of Windows find this file in the folder going to scatter. Select file MT6575_android_scatter_emmc.duo.modaco.txt.
12. Now you have to choose what to Flashing. On the bottom window you will see many writings and in this case the Root you check the box next to the word RECOVERY.
13. After clicking within the area corresponding to the RECOVERY need to click just above the word RECOVERY.
14. We will open a new window in Windows and in this case you get inside the Images folder where you will find two files.
15. Now to install the ClockworkMod 6.0.1.5 you must click on the file cwm6.0.1.5.lucky76_1.img.
6. At this point you are ready to file the new Flashing the ClockworkMod recovery 6.0.1.5.
WARNING I remind you that you do this to flash your own risk. Flashing is dangerous and could result in an unusable vosto Device. So if you have it all figured out and you are sure and aware of what you're doing, continue with the steps below .......
17. To get started you will need the Flash at this point click on Download.
18. You will come out a dialog warning / alert with the yellow triangle and black exclamation mark telling you not all the images have been properly loaded .... etc..
19. Click on Yes
20. Hook up your Gallant Duo to your PC via the USB cable within a few seconds.
21. You'll see a line starting at the bottom gradually followed by a Red and Yellow and finally there will come a window with a Green Circle Square on side written Download OK.
22. Flash the new ClockworkMod recovery 6.0.1.5 is over/end.
23. Disconnect the USB cable from the Duo Gallant and replace the battery in the device.
24. Now before restarting usually have to go into recovery mode
25. To enter recovery mode you have to press and hold Vol + (up) and Power on the device with the Power button (starting of the engine). Hold down both buttons until you see from the new Recovery. Now you can release the Vol + and Power.
26. With the volume keys you can get on and off in the options of the new recovery. With the Power Button can confirm your choices in the various menus.
27. To restart go to the written reboot system now (System Reboot) ---> To select this option press the Power button as mentioned.
28. Wait Rebooting the System.
29. If you want to enter in Recovery when the phone is on I recommend use app Quick Boot.
30. End
DOWNLOAD
Link Download Fully Pack R2 with tool and file Scatter. -----> Here
md5 ---> 4a055ab7ab0ff9d51647c77961886fbc
Link Download only File Immagine of Recovery Clockworkmod ---> Here
md5 ---> 30022fcc55440c784bae7746f5a8f6fb
Link Download only File Imagine of Recovery 6.0.2.8 ---> Here
md5 ---> 552346dca388cb2993546a5295dd55d5
Link Download ZIP Flash Recovery 6.0.2.8 Normal -----> Here
md5 ---> cdf297dfde3c082d71cd80545dacbaba
If you have installed 6.0.1.5 Recovery you can flash this .zip file into it.
Big Thanks to Bruno Martins have compiled this Recovery from cyano 10.1 source and i have ported for us device Gallant Duo.
Credits
PaulOBrien -----> Root and pack R1
Clockworkmod -----> For their recoverymod ----> Koush Dutta
Bruno Martins ----> Base 6.0.2.8 for Devices MTK 6575/77
Lucky76 ----> Porting for Acer Liquid Gallant Duo and Acer Z110
Tuttoandroid.net -----> For all my post ----> Here
Bye.

Hi, the boot.img backed-up by this recovery seems odd (no ANDROID! header, etc...). However it restores correctly. By any chance was the mechanism changed? Would you be able to share the modified source code?

ameer1234567890 said:
Hi, the boot.img backed-up by this recovery seems odd (no ANDROID! header, etc...). However it restores correctly. By any chance was the mechanism changed? Would you be able to share the modified source code?
Click to expand...
Click to collapse
Hi i have porting new recovery cwm 6.0.2.8.....

Acer Liquid E3 - E380
The new Acer Liquid E3 E380 Duo is coming very very soon now. I have posted links to the kernel source etc, and we (waiting for our new phones) would be GREATLY THANKFUL for developers that help to root the E380 and develop custom ROMs / CWM!
http://forum.xda-developers.com/showthread.php?p=51524910

Cheers
Can someone reupload the files for cwm 6.0.2.8 once made by Bruno Martins ,links are down so far

[Recovery]Philz Touch Recovery for Gionee Elife E3 Kitkat Firmware

I have successfully Ported Philz Touch Recovery to our Gionee Elife E3 device.
All credits goes to Master yuweng for the simple and easy instruction to build it.
Download Link: Philz Touch Recovery V6
Instructions:
* Download Philz Touch Recovery.img
* Replace it in the Rom downloaded from Gionee.co.in/gcafe file of Kitkat
* open spflash tool
* open Scatter loading
* Select MT6589_Android_scatter_emmc.txt
* uncheck every thing except Recovery
* click Download
* Turn off ur device
*connect ur device(Gionee E3) with usb cable given by Gionee.
*wait for 'Ok" message.
*disconnect and reboot ur device.

[MT6580] [Kernel 3.18.19] Leagoo OS - Symphony i10

Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Notable Feature :
Xpossed Firmware Support
Background Apps Working
Themed SystemUI
Known Bug:
*Front Camera Flash Not Supporting*
*Blur Not Support During Camera Focus*
*Not Working Smart Awake*
*Problem in Downloading From Playstore*
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. Leagoo OS For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Leagoo OS For i10 zip file here and save the file on your phone’s internal memory
Step 3 : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Leagoo OS For i10 zip file that you downloaded on step 2, after that select Add more zips option and select SuperSU > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Credits:
*Hasin Rayan ZIdni (For i10)*
*Kbd Md Rasel (For GH6)*

buddy could u please port a recovery to my device "intex cloud q11"
device specs
KERNEL 3.18.19+
mediatek mt6580
android 6.0
display 5.5 inch hd
resolution 720x1280
.
i can't port it via easy magic twrp maker coz it asks root permissions and i cant root my device [intex cloud q11].
i ve been trying to root my device, but i cant root it.
i ve tried almost every rooting tools both pc and droid and even mtkdroidtools.
but neither of them worked.
can u just port this recovery to my device.
i'll send u the stock boot.img and recovery.img of my device.
please.
i'd do anything in return for u. please.
please please please please.

dj4v1n45h said:
buddy could u please port a recovery to my device "intex cloud q11"
device specs
KERNEL 3.18.19+
mediatek mt6580
android 6.0
display 5.5 inch hd
resolution 720x1280
.
i can't port it via easy magic twrp maker coz it asks root permissions and i cant root my device [intex cloud q11].
i ve been trying to root my device, but i cant root it.
i ve tried almost every rooting tools both pc and droid and even mtkdroidtools.
but neither of them worked.
can u just port this recovery to my device.
i'll send u the stock boot.img and recovery.img of my device.
please.
i'd do anything in return for u. please.
please please please please.
Click to expand...
Click to collapse
inbox me ur boot.img or recovery

Zidni said:
inbox me ur boot.img or recovery
Click to expand...
Click to collapse
hey buddy. no thanks.
i ve made it. ported twrp without a bug.
thanks btw.

Touch not worked in Twrp
How to fixed touch not working in symphony v75??

[SC7731/SC8830] [5.1] Cherry Mobile Omega HD 3 Firmware v1 By Team YuniX

Note:
* I'm not responsible for any damages will be held! Do at your own risk!
* Rooted system on .PAC file
* Follow instructions!
* This will delete your installed user apps!
*Please Do a Full Wipe/Factory Reset Before Flashing Thanks
For:
* Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / Softbrick
Part One: Installing drivers
1. Extract the driver file.
2. Run dpinst.exe . Note that "x86" folder is for 32-bit computer while "amd64" is for 64-bit computer
3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager
4. Turn off your phone and remove the battery then insert back the battery again.
5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don't connect the USB cord to PC itself.
6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC.
7. A poped-up notification appear to show if the drivers are successfully installed.
8. You may now remove the USB cord to the PC if success but don't remove yet the micro USB cord to your phone.
9. Now, we are ready to use Research Download!
Part Two: Using Research Download
1. Extract Research Download file
2. Extract your downloaded stock ROM file
3. Run ResearchDownload.exe
4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click "Open" button.
5. Once the PAC file is loaded click play button .
6.Connect your Omega HD 3 (while holding volume down)
7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone!
Additional:
* After the first boot of your phone, your current internal storage is xxxGB. Before doing anything else like rooting, installing or flashing recoveries, go to Settings>Factory data reset>Factory data reset then tap Reset Phone then tap Erase everything. Your phone will reboot to recovery. Wait for erasing and it reboot automatically. After that, your internal storage restore to its default size
Links:
Final Firmware For Omega HD 3 V1 By Team YuniX [MIUI Recovery Recomended]
Click Here
Spreadtrum Drivers
Click Here
Research Download
Click Here
ATTENTION!! THIS IS REQUIRED!!!
Please Boot Into MIUI Recovery !
Todo..
Boot Into Recovery Mode hold "Power button +volume +"
Use Volume Kesys to Navigate "Wipe/Factory Reset"
Then Select "Factory Reset" and it to Finish.
Done
Credits
* Rafael A. Broas
* Vhin Cantalejo
* Dranreb Alcantara
* Ezra Ramos Monteclaro
* Team YuniX
* Mito A260
* Cherry Mobile Omega HD 3 / 3s

Thanks for Approve

Cloudfone Spotify Edition Lite V10 PAC Firmware By Team YuniX

NOTE! For V10 ONLY! !!
Requirements :
PAC FILE : Link: Here
Factory Upgrade ResearchLink : Here
Download all Requirements
Extract Compressed Files
Install Drivers
Open Factory Download
Load the Pac File
Turn off the Device And Unplug Device from USB cord
Press Start Downloading
Plug the CFSEL
Wait for the process to end
DONE
How to Fix Signal After Flashing the PAC File?
Donwload this fix: Here
Copy the fix into your Sdcard And Power Off your Phone
Boot into recovery mode by
Holding the Power button and holding volume Up button
if you see the Cloudfone logo release your Fingers quickly
Now your in the recovery mode
TAP Instal
Locate The Fix you copied earlier
then flash wait for a second and DONE!
Credits :
Ezra Ramos Monteclaro
Ben Tumblinf
Bo Troublesome
Team YuniX
Cherry Mobile J1 mini

flick.ezra said:
NOTE! For V10 ONLY! !!
Requirements :
PAC FILE : Link: Here
Factory Upgrade ResearchLink : Here
Download all Requirements
Extract Compressed Files
Install Drivers
Open Factory Download
Load the Pac File
Turn off the Device And Unplug Device from USB cord
Press Start Downloading
Plug the CFSEL
Wait for the process to end
DONE
How to Fix Signal After Flashing the PAC File?
Donwload this fix: Here
Copy the fix into your Sdcard And Power Off your Phone
Boot into recovery mode by
Holding the Power button and holding volume Up button
if you see the Cloudfone logo release your Fingers quickly
Now your in the recovery mode
TAP Instal
Locate The Fix you copied earlier
then flash wait for a second and DONE!
Credits :
Ezra Ramos Monteclaro
Ben Tumblinf
Bo Troublesome
Team YuniX
Cherry Mobile J1 mini
Click to expand...
Click to collapse
what's v10?
how do I know that this is compatible with my Spotify Edition Lite?
---------- Post added at 03:46 PM ---------- Previous post was at 03:38 PM ----------
what android version is this?

my CLOUDFONE SPOTIFY EDITION LITE have v09 firmware and i want to update it to v10.