Hey Guys
Need help with this one, my daughter locked her Lava LT-7009 tablet and forgot the pin code.
When I push power+volume up the recovery menu is in Chinese and power+volume down buttons resets it but won't hard reset. I've tried pushing the reset pin with no success either.
Without having to learn Chinese, does anyone have any suggestions? Wiping etc isn't an issue or can it be flashed with another ROM (preferably English lol). Any assistance is much appreciated.
Hi, thank you for using XDA assist. Unfortunately there is virtually no information about your device on XDA. You could try asking here, http://forum.xda-developers.com/general/help. I'm sorry I can't be more helpful.
Thread closed.
Related
Hello everyone. first of all I must say that I am Italian, so I apologize if my English is not perfect. Now let me share with you my problem: I have among others a Htc8s for some time after the last updates the baby did not work very well so I decided to try a process to rewrite the Roma since I could not restore it with the hard reset , so I ran into the same process of user Deextaar "The phone is dead
Hello, on the phone I have got an error message where was written insert the install media and something about recovery. So I download the files and I flash it. But unfortunately when i Should push the volume buttons, camera and flash and power button was started I let go of the button and the flash did not finished and now the display is out, the phone will not turn on, flash mode do not working, and after connecting to the PC is displayed That is not working properly. Do you know what I should do? "
It seems incredible but like an idiot I made the same mistakes, and now I find myself with my HTC8S that no charge is not recognized by pc that flashes for a few seconds and sometimes vibrates. Know that you are two weeks I read the post and try different solutions but nothing I can not get it started. I hope you can help me get my jewel. Excuse me while I was down in my first post. In expectation of a prompt Response I greet you and thank you in advance
Hi, thank you for using XDA Assist. The best place to get help is in your device's specific forum here, http://forum.xda-developers.com/htc-8s They are the experts on your device.
Good luck!
Thread closed.
Hi,
I'm new here, for first thanks for read my help request,
I don't know if i'm doing the right thing writing here,I do not want to bother,
and sorry for my bad eng.
I tried to root my Phonepad using RootZenFone-1.4.6.4r, but when i try to reboot my phone fallen in a infinite loading Screen,
I waited 10 minutes than i forced power off with the power button, now when i try to power on it, it does the same thing
I'm very noob using fastboot,
there is a way to read partitions from fast boot?
if i do the system upgrade using the default bootloader (load from sd card in bootoption) i lose all my data?
I know that i can run a custom kernel image from fastboot, but i think that you know best pratcties to applied in these cases,
Thanks in advance,
SleepyDev
Hi,
Thanks for using XDA Assist you may try to post here has your device dont have a dedicated forum yet [GUIDE] How to Root ASUS Fonepad 7 FE375CG K019 (11.10.1.43) KitKat
Also you can post here http://forum.xda-developers.com/t/fonepade-7 too
Good Luck!
Thread Closed.
Hello friends!,
I have a huge problem with my THL W200 phone. You see stupid me changed the build.prop file and then my phone got bricked and I think still is, because it wont pass the THL logo. I don't have a recovery installed, so it makes this situation harder, I have tried factory mode (volume down + power) and selected emmc, but still stops at the THL logo.
I have tried with SP flash tool, but nobody gives decent instructions... and the program doesn't wish to do anything at all.
I would very appreciate it if somebody can help me fix my phone.
Bump. Please help me! Phone costed me a lot.
Hi Dujo13309,
Unfortunately there's no dedicated forum for your model. Since I'm not familiar with MTK devices I suggest you to ask your question in the following thread: http://forum.xda-developers.com/showthread.php?t=2259645
Thank you for using XDA Assist.
Thread closed.
Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 Intel®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
OreoFudge said:
Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 Intel®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
Click to expand...
Click to collapse
Hi Jinky
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards.
.
Hi, today i tried to hard reset mi S6, and i think is a clone, i tried to hard reset, but, i get stuck in the android logo and down appears (Nincs parancs.) I tried to push power button, to reboot the device, but he don't do anyting !!! Is any method to flash my phone with a USB cable connected to my pc??? Or anyting, to flash my device!!
I don't speack inglish very good, im spanish!
Hi
You can ask in the forum linked below, providing as much info as possible so that you can get help
http://forum.xda-developers.com/android/help
Good luck