have a problem with my S3, few days ago he`s stuck in boot lop, i cant to pass to recovery mode only to download mode. I have tried to reinstal new original firmware from sammobile in odin but he give me error, PIT PARTITION MISSING, also i have tried to flash few PIT files but in some he give`s me error or he`s stuck with message Get PIT for mapping (i have leave 5hours but nothing change, stuck on that message). I used odin version 1.85, 3.04, 3.07 but with no success.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping.. --->> And stuck hours and hours
and sometimes
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing cant be installed if my pit partition is missing.
I have tried to flash clock work mode in adb but my phone cant be recognized in cmd console.
My question is, there is any chance to get my phone back with z3x box? I have samsung&lg edition so if is any chance i want to try.
Thank you for read me
Hi there,
You'd be best served asking for help from the experts who own your device here:
[HELP THREAD] Galaxy S3 Ask any question.
Good luck
Related
I have the Verizon Note 2, btw. I rooted my phone this morning, and everything was fine until I tried to install Clockworkmod rom manager. I got a message saying something about unauthorized software and to take my phone to the Verizon store. I've tried all sorts of "Restore to Stock" methods I've found online with Odin, but none have worked so far. I tried to flash a "stock" bootloader, but Odin just hangs up here:
"<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!"
Does anyone know what I can do? I can't do anything with the phone but access the Odin download mode. Maybe flash a stock PIT file? Please help. I miss my phone
When I boot the S3, it goes into download mode.
I tried flashing the VRALEC file, except it says no PIT paritions. So, I downloaded the PIT file for the 16GB phone, but I get the following error:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
How can I fix this?
Hi all,
My S7 (rooted) appears to be stuck in a bootloop. Last night, I was using it as normal and set it down to charge overnight.
Woke up this morning, recurring bootloop. Tried to get into recovery, but just got a 'Downloading' screen. Tried to flash a stock firmware (vol down key etc) but got
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
For info, it's rooted, running a custom rom and until yesterday was working fine. No new software has been installed in the past couple of weeks, no settings have been changed.
Any ideas as to how I can get the phone working again?
The "Downloading..." screen is where you need to be to flash stock with ODIN
Make sure to use ODIN 3.12.3 minimum version
I'll give it a go when I get home from work and report back. Seems I was using an older version of Odin (3.11.1). I now have 3.12.3.
Thanks for the reply.
So I loaded a BL, AP, CP & CSC file into Odin (stock 7.0 firmware based on my phone carrier).
Clicked Start:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Doesn't seem to like what i'm doing.
<ID:0/003> FAIL! (DeviceInfo)
Do you have a green/blue COM port lit up at the top of ODIN when you connect the phone?
Tried a different USB lead / port?
The Com port info shows in blue. Tried on two different PCs, 2 different official cables, 4 different USB ports.
Getting a bit further:
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Any thoughts?
Hi,i used lineage os without anyproblems,one day i decided to flash the original rom (downloanded from sammobile),so i go in twrp,i made backup,i wiped all,then i go in download mod,plug in with odin etc,when i am about flash the samobile rom with odin it sais
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1831)
<OSM> All threads completed. (succeed 0 / failed 1)
My settings are correct,i guess,i use the AP,options are the folowing (autoreboot)(re-partition)(f.resettime)
And i tried many things from google still not working,and bonus thing,when i try to go in twrp,is not working.
You could have a look at this thread it may help you with this
https://forum.xda-developers.com/showthread.php?t=1808412
Hey guys,
I had an issues yesterday that have forced me to get the original firmware and reinstall it but it won't work end of story phone is in odin mode odin 3.12.3 seems stuck here's my Odin log
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
it's been like that since 1am this morning and odin just says "Set Partition" at the top anyone know what's happening?
EDIT: Download mode just came up with VBMETA:ERROR verifing VB META VBMETA: no sign info
Fixxed
This was resolved using odin 3.13.1