PLEASE HELP!!! Samsung Galaxy Note 2 bricked? - General Questions and Answers

I have the Verizon Note 2, btw. I rooted my phone this morning, and everything was fine until I tried to install Clockworkmod rom manager. I got a message saying something about unauthorized software and to take my phone to the Verizon store. I've tried all sorts of "Restore to Stock" methods I've found online with Odin, but none have worked so far. I tried to flash a "stock" bootloader, but Odin just hangs up here:
"<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!"
Does anyone know what I can do? I can't do anything with the phone but access the Odin download mode. Maybe flash a stock PIT file? Please help. I miss my phone

Related

[Completed] [Q]

have a problem with my S3, few days ago he`s stuck in boot lop, i cant to pass to recovery mode only to download mode. I have tried to reinstal new original firmware from sammobile in odin but he give me error, PIT PARTITION MISSING, also i have tried to flash few PIT files but in some he give`s me error or he`s stuck with message Get PIT for mapping (i have leave 5hours but nothing change, stuck on that message). I used odin version 1.85, 3.04, 3.07 but with no success.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping.. --->> And stuck hours and hours
and sometimes
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing cant be installed if my pit partition is missing.
I have tried to flash clock work mode in adb but my phone cant be recognized in cmd console.
My question is, there is any chance to get my phone back with z3x box? I have samsung&lg edition so if is any chance i want to try.
Thank you for read me
Hi there,
You'd be best served asking for help from the experts who own your device here:
[HELP THREAD] Galaxy S3 Ask any question.
Good luck

[Completed] Samsung Galaxy S4 (SCH-I545) Verizon Help Needed (Soft-Brick)

Hello,
I recently borrowed my roommate's Verizon S4 because my phone broke. I rooted it because I have a different provider.
However, in my root addicted mind-set, I decided to get a custom ROM installed and so I tried to download recovery. This phone was running 5.0.1.
Upon downloading a recovery, the phone soft-bricked. It shows the Samsung logo with a wrench, and makes an error message when attempting to boot.
I tried using Odin to flash the stock firmware, but I kept getting the following error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched long and far and have yet to find a solution. I know that the reason for this issue is most likely due to the 5.0.1. build, but I was hoping that maybe something had developed in the last few months.
Any and all help is appreciated.
Also, I am not able to boot into recovery, but I am able to boot into download mode - I also reinstalled the Samsung drivers, and am using Odin 10.6. I tried using the ME7 firmware, but that didn't lead to much either.
I recently found a Verizon Software Assistant file and my phone won't be recognized on the application. Not sure what next steps are. I posted on reddit too, and no luck there either.
shivpaulchadha said:
Hello,
I recently borrowed my roommate's Verizon S4 because my phone broke. I rooted it because I have a different provider.
However, in my root addicted mind-set, I decided to get a custom ROM installed and so I tried to download recovery. This phone was running 5.0.1.
Upon downloading a recovery, the phone soft-bricked. It shows the Samsung logo with a wrench, and makes an error message when attempting to boot.
I tried using Odin to flash the stock firmware, but I kept getting the following error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched long and far and have yet to find a solution. I know that the reason for this issue is most likely due to the 5.0.1. build, but I was hoping that maybe something had developed in the last few months.
Any and all help is appreciated.
Also, I am not able to boot into recovery, but I am able to boot into download mode - I also reinstalled the Samsung drivers, and am using Odin 10.6. I tried using the ME7 firmware, but that didn't lead to much either.
I recently found a Verizon Software Assistant file and my phone won't be recognized on the application. Not sure what next steps are. I posted on reddit too, and no luck there either.
Click to expand...
Click to collapse
Hi shivpaulchadha
Thanks you for using XDA Assist.
I see you already posted in the correct forum before here. Could you please "bump" your thread up for it could be noticed by others users? I'm sure our experts in there will be able to tackle the issue.
Nice regards and good luck.
.

[Completed] Galaxy Note 5 (Sprint) N920P can not flash rom in TWRP

I have successfully installed TWRP without a hitch, and I can roll that back to stock recovery if I need to. Now, I have tried every available Sprint friendly rom I can find including stock ROMs. MOAR, etc. Every time I try to install a zip I encounter the same error:
Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Error installing zip file '/sdcard/customROMfile.zip'
Not sure if this helps but the only zip file it ever successfully installed was Galaxy Note 5 OGD/OI6/OK3 Stock Deodexed Roms (https://forum.xda-developers.com/sp...galaxy-note-5-ogd-deodexed-stock-rom-t3191065) That installed correctly but when rebooting the phone is exactly the same - hangs on boot flash SAMSUNG logo screen as soon as you turn it on.
I did try to roll back to the stock firmware using Odin but when I try to choose the file within Odin to push to the phone Odin freezes. I have spent 3 days on this now and I really don't know what to do. I hope I didn't brick this $400 phone. Any help is surely appreciated as I have already had to buy a cheap replacement for the time being.
These are the errors I receive when trying to flash a .tar (stock recovery, custom rom,) within Odin (every version I have tried...... so many different versions its crazy)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> param.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response form LOKE
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi !
Try to use some different Odin versions and also be sure you flash the proper firmware file for your device

[Completed] Odin flashing origin ROM failed!!! IMPORTANT help

Hello there,
Recently i have rooted my "rd android phone (i know how to do it)
but as some knows snapchat does not support root so i've checked and there were solutions....
As root have dissapeared on my phone i've decided to re-flash it again...
phone: Samsung galaxy J3
Model: SM-J320FN
Version: 5.1.1
Now my primary phone is stuck in boot loop witch error: Recovery is not seandroid enforcing
I can't acces my recovery mode by Vol+ + HOME + POW
and here error of odin when flshing the original rom:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> spl.img
<ID:0/003> sboot.bin
<ID:0/003> sboot2.bin
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
Thanks for helping I reaaly need it.
Are you sure that your stock ROM downloaded correctly, have you checked the md5-sum of the file? Your error seems that one of the files is corrupted.

[Solved] Samsung Galaxy S7 G930FD Odin flashing to stock firmware fails

Here's what I did from start
Installed TWRP
installed lineage 17.1 with gapps and magisk
Removed everything and installed pixel experience 10 herolte
Volte was not working in both
So I downloaded the stock firmware (latest) according to my model - G930FD INS and tried to flash it through odin as per steps
But
The log gets stuck on 'SYSTEM.IMG' and after a while fails to flash the phone.
I just want to get my stock firmware back so I can start my calls and msgs.
Please help.
I didn't used anything different just clean flashed my phone.
I have the latest firmware for stock
log file
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4077 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Solved
As the problem was, while flashing with Odin it wasn't showing any error and was only giving out output as Fail, turns out it was a port problem, I changed my USB port and cable and it worked fine. My friend also gave me advice to try it on another laptop because this happens sometimes and sometimes it works.
So if your log is something similar to what I have posted try downloading the latest Odin and changing ports or PCs, if nothing then create an id here and start a thread somebody will help you out for sure.
Peace

Categories

Resources