Hi.
I'm would like flashing my SGS to 2.2.1 android fw. I don't use my phone because the odin don't flash my phone.. HELP PLS!!
I saved my efs files and I have unlock code or what. PM for pictures. Thanks. And sorry for my very bad English
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> normalboot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well, when i switch on my phone, I see one phone and computer.
When I boot the S3, it goes into download mode.
I tried flashing the VRALEC file, except it says no PIT paritions. So, I downloaded the PIT file for the 16GB phone, but I get the following error:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
How can I fix this?
i tried to root my s6, now only shows the blue update error, how do i unbrick it ?
this is the odin log
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks alot
Hi all,
My S7 (rooted) appears to be stuck in a bootloop. Last night, I was using it as normal and set it down to charge overnight.
Woke up this morning, recurring bootloop. Tried to get into recovery, but just got a 'Downloading' screen. Tried to flash a stock firmware (vol down key etc) but got
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
For info, it's rooted, running a custom rom and until yesterday was working fine. No new software has been installed in the past couple of weeks, no settings have been changed.
Any ideas as to how I can get the phone working again?
The "Downloading..." screen is where you need to be to flash stock with ODIN
Make sure to use ODIN 3.12.3 minimum version
I'll give it a go when I get home from work and report back. Seems I was using an older version of Odin (3.11.1). I now have 3.12.3.
Thanks for the reply.
So I loaded a BL, AP, CP & CSC file into Odin (stock 7.0 firmware based on my phone carrier).
Clicked Start:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Doesn't seem to like what i'm doing.
<ID:0/003> FAIL! (DeviceInfo)
Do you have a green/blue COM port lit up at the top of ODIN when you connect the phone?
Tried a different USB lead / port?
The Com port info shows in blue. Tried on two different PCs, 2 different official cables, 4 different USB ports.
Getting a bit further:
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Any thoughts?
so im working on a GT-N8013 with a little known background. was stock and rooted then the owner flashed a custom rom not for the device im guessing and it now boots to a white screen for os and recover. im only able to access download mode. issue is trying to flash anything in odin fails with no pit partition. if i load the pit file for the device it fails with Re-Partition operation failed. whats next to try? ive tried to flash stock, cwm, and twrp.
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!