Hi.
I'm would like flashing my SGS to 2.2.1 android fw. I don't use my phone because the odin don't flash my phone.. HELP PLS!!
I saved my efs files and I have unlock code or what. PM for pictures. Thanks. And sorry for my very bad English
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> normalboot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well, when i switch on my phone, I see one phone and computer.
Related
HELP! I soft bricked my GSIII (Verizon) and I attempted to flash VRALG1-Full.tar to unbrick it but then it failed with this on the phone:
Erasing USERDATA Partition..
ODIN: flash write failure
and this was the odin log on the pc:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Write)
<OSM> All threads completed. (succeed 0 / failed 1)
What can I possibly do to bring this phone back to life? I will do anything except change anything internally or send it to Verizon or Samsung.
I recently tried to unroot my Galaxy Note 10.1 SCH-I925. When I tried to flash the stock firmware on it I get the following:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tired almost every piece of firmware I could find but I have no success . I am still kinda new to flashing firmware but this is my only failure so this has got me stuck. Is there anyone out there with a solution or should sent it to a professional
i have the same problem if you find solution please advice
Hi guys, i have flashed Russia firmware[I9500XXUHOH7_I9500SERHOH7_SER - if it does even matter ] for i9500 ( i'm from romania ) and i can't find the right modem to flash as mobile data doesn't work and wi-fi wouldn't turn on at all. My baseband is XXUHOD4 and i couldn't find it on the i9500 modem threads or anywhere similar, like XXUH*** as i heard it's compatible aswell.
Please read everything before doing anything else. Ask for more information, i'd appreciate some fast help
UP : I have tried to flash some modems, XXUHOD7 and XXUHOE2 but odin fails everytime, here is the log.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I did nothing else to phone but to root it and backup EFS. I have TWRP !
Hi and thank you for using XDA Assist
I saw you already posted into a right section so i'm gonna close this thread now.
Good luck!
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
hello, make that it's easy
https://www.youtube.com/watch?v=y8AZyalTf5Y
kgmaybe said:
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
I've had that problem. The really easy way to fix this is to just flash TWRP through Odin.
Have you tried to do what it told you to do and use Smart Switch? If it doesn't work, you could try to initialize using Smart Switch.
so im working on a GT-N8013 with a little known background. was stock and rooted then the owner flashed a custom rom not for the device im guessing and it now boots to a white screen for os and recover. im only able to access download mode. issue is trying to flash anything in odin fails with no pit partition. if i load the pit file for the device it fails with Re-Partition operation failed. whats next to try? ive tried to flash stock, cwm, and twrp.
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!