Hi guys, i have flashed Russia firmware[I9500XXUHOH7_I9500SERHOH7_SER - if it does even matter ] for i9500 ( i'm from romania ) and i can't find the right modem to flash as mobile data doesn't work and wi-fi wouldn't turn on at all. My baseband is XXUHOD4 and i couldn't find it on the i9500 modem threads or anywhere similar, like XXUH*** as i heard it's compatible aswell.
Please read everything before doing anything else. Ask for more information, i'd appreciate some fast help
UP : I have tried to flash some modems, XXUHOD7 and XXUHOE2 but odin fails everytime, here is the log.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I did nothing else to phone but to root it and backup EFS. I have TWRP !
Hi and thank you for using XDA Assist
I saw you already posted into a right section so i'm gonna close this thread now.
Good luck!
Related
Hi.
I'm would like flashing my SGS to 2.2.1 android fw. I don't use my phone because the odin don't flash my phone.. HELP PLS!!
I saved my efs files and I have unlock code or what. PM for pictures. Thanks. And sorry for my very bad English
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> normalboot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well, when i switch on my phone, I see one phone and computer.
I recently tried to unroot my Galaxy Note 10.1 SCH-I925. When I tried to flash the stock firmware on it I get the following:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tired almost every piece of firmware I could find but I have no success . I am still kinda new to flashing firmware but this is my only failure so this has got me stuck. Is there anyone out there with a solution or should sent it to a professional
i have the same problem if you find solution please advice
so i downloaded the 4.4.2 firmware i did all the steps with odin.. and i keep getting this
<OSM> Please wait..
<OSM> G900A_Downgrade_to_NCE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
IF ANYONE CAN TELL ME WHAT IM DOING WRONG THAT WOULD BE GREAT... THANKS
Hi
Please explain your issue in the Q&A section of your device: http://forum.xda-developers.com/att-galaxy-s5/help
Do not hesitate to share more information about your situation (which files you have used, Odin version, checkboxes in Odin and so on). It will help others to help you
Thank you for using XDA Assist.
Good luck!
Hello guys,
I'm a bit new to posting things to this forum. My english isn't very good either :fingers-crossed:
My problem is:
i'm trying to install TWRP recovery to my s7. Everytime i install it with Odin everything works and when i reboot into recovery it goes automatically to my stock recovery.
LOG odin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Could somebody please help me with my problem
I'm sorry if this has been asked before but i just can't find the awnser
i've used this tutorial: http://www.droidviews.com/install-twrp-galaxy-s7-exynos-variants-g930ffdxsw8/
Jesse050 said:
Hello guys,
I'm a bit new to posting things to this forum. My english isn't very good either :fingers-crossed:
My problem is:
i'm trying to install TWRP recovery to my s7. Everytime i install it with Odin everything works and when i reboot into recovery it goes automatically to my stock recovery.
LOG odin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Could somebody please help me with my problem
I'm sorry if this has been asked before but i just can't find the awnser
i've used this tutorial: http://www.droidviews.com/install-twrp-galaxy-s7-exynos-variants-g930ffdxsw8/
Click to expand...
Click to collapse
I had the same problem. I just used chainfire 's auto root and then installed twrp with flashify.
so im working on a GT-N8013 with a little known background. was stock and rooted then the owner flashed a custom rom not for the device im guessing and it now boots to a white screen for os and recover. im only able to access download mode. issue is trying to flash anything in odin fails with no pit partition. if i load the pit file for the device it fails with Re-Partition operation failed. whats next to try? ive tried to flash stock, cwm, and twrp.
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!