[Q] Xperia C3 won't open, no display, just red led light - Sony Xperia C

:crying:I rooted my brother's Sony Xperia C3 via Framaroot and everything seemed fine. Then, I installed MobileUncle MTK Tools and flashed TWRP recovery. Lastly, I installed Xposed Installer, went to Framework, Update/Install, then chose the reboot option. I've waited for the device to open but it didn't! I tried using Power and Volume + and nothing is happening. The same with Power and Volume -, still no display. I tried to plug it with its charger, then red led light shows. The light is on for quite some time, then it blinked, and gone, when I pushed the Power and Volume buttons again while charging, the red led light just show up. Please help me what should I do. Please..:crying:

can you show some information of your device: what version of android( kikat 4.4.??, or android 5).
can you try in to fastboot mode(press volume+ and plugin cable connect to computer) or Flash mode(volume - and plugin cable). make sure your conputer install Flash tool of Sony and install full driver of your device.
can you download flash tool in this link page http://forum.xda-developers.com/sony-xperia-c/general/guide-root-sony-xperia-c3-dual-d2502-t2973589
if your computer( Flash tool can see your device) you can re-Flash ROM of your device. how to do use Flash tool please search more information on some thead.

Related

[Xperia M2][D2305] How to recover from bootloop after unlock bootloader

[Xperia M2][D2305][4.3] 18.0.A.1.30
XPERIA M2 Recovery from Brick and more...etc
u can only use this 2 item
Flash tool
http://www.flashtool.net/index.php
[Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318]
http://forum.xda-developers.com/showthread.php?t=2635830
D2305_18.0.A.1.30_Global Generic by Sai Arkar
https://mega.co.nz/#!tc4G0Ahb!5MQuH17IY5OwBE50Mlb5SzHBE1G04UOyGz6q9YipoYI
1.Download and install Flashtool on your PC.
2.Download the firmware you need (from the list below) and move it into the directory C:/Flashtool/firmwares
3.Open Flashtool, click on the lightning symbol ("flash device"), select "Flashmode" and click on "OK"
4.Just select the name of what you downloaded and click on "Flash"
5.Wait for a window to pop up (it may take a few minutes, be patient)
6.Now everything is ready: turn off your phone
7.Push the volume-down button, keep pushing and connect to your PC
8.Once the flashing process has started, release the volume rocker as soon as possible
9.NEVER disconnect the USB cable until it's finished!!!
10.Turn on and enjoy!
IMPORTANT:
if you are using Windows 8 you will need to enable few things to allow driver installation
If you are a Windows 8.1 user, you must see this video
https://www.youtube.com/watch?v=NM1MN8QZhnk
Please contact us if there is anything we can do.
Twitter
https://twitter.com/kum4423
Phone will not switch on ...
Tried unlocking the boootloader following instructions from the Sony website,
after "sucessfully" unlocking the bootloader in flashboot mode the phone got stuck in a boot loop.
Eventually stopped the phone boot looping by pressing all the buttons at the same time, have now found out it is the two volume buttons and the power button, then the phone did not switch on at all, tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone. Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from http://forum.xda-developers.com/showthread.php?t=2762296 and it worked.
fonephreak said:
Tried unlocking the boootloader following instructions from the Sony website,
after "sucessfully" unlocking the bootloader in flashboot mode the phone got stuck in a boot loop.
Eventually stopped the phone boot looping by pressing all the buttons at the same time, have now found out it is the two volume buttons and the power button, then the phone did not switch on at all, tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone. Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from http://forum.xda-developers.com/showthread.php?t=2762296 and it worked.
Click to expand...
Click to collapse
tried connecting and holding volume button etc, to USB but all that comes up in device manager is "unknown device" and the flash tool does not recognise it in any mode, found out that holding the power button down for five minutes reboots the phone.
Click to expand...
Click to collapse
Did you read this? and tried it?
IMPORTANT:
if you are using Windows 8 you will need to enable few things to allow driver installation
If you are a Windows 8.1 user, you must see this video
https://www.youtube.com/watch?v=NM1MN8QZhnk
Then flashed with above firmware and ended up in another bootloop, holding the up volume and power button makes the phone vibrate once then three times, let go after one and then you can get into flashmode, this time I flashed the latest firmware from
Click to expand...
Click to collapse
u can only use this listed item
Flash tool
[Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318]
D2305_18.0.A.1.30_Global Generic by Sai Arkar←This FTF file is most important
Help please?
Hi man, I need your help urgently... I tried flashing kernel image to my Xperia M2 D2303, but I got impatient as recovery mode wasn't coming on and I did in in fastboot mode instead. Now it's stuck on boot loop and the screen only flashes. I can't get it to connect to my computer either, my computer just doesn't recognize it anymore. So, I can't flash anything on to it to recover it now either, and I tried putting files into my SD card to restore from but those files won't show when I try to download from zip using Clockwork Mod. What should I do?
Update
I tried to flash a custom rom into it, but even though I remember turning USB debugging on, it seems it's off. And plus, the drivers link you gave don't include the Xperia m2 drivers.
It would not connect to Flash modehttp://dl-1.va.us.xda-developers.com/2/9/8/5/4/7/8/NewPicture002.jpg?key=xzdzp41r6BQtbbijWRPtQA&ts=1414307092
Could You please update link for :
"D2305_18.0.A.1.30_Global Generic by Sai Arkar"
can't download file, please help
Thank You

Sony Xperia Z3 HARD BRICKED

Hi. My device is hardbricked. I see no lights while charging. Flashtool doesn't see my device.how can i fix this?
Edit:Easily fixed it.I plugged my device into the computer.I entered platform-tools and flashed boot.img.I saw "waiting for device" And i pressed volume up and power buttons. Suddenly boot flashed and i recovered my phone
You are very unlikely to have hard bricked it unless you have unlocked the boot and flashed something wrong.
If you did this please help us help you by telling us what you did just before this happened.
Also, just leave the phone on charge (Wall charger) for 24 hours and then see what happens.
In the mean time read this
solution for no LEDs no response no fastboot devices.
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Fastboot remote command not allowed SOLVED
stevenmanzano said:
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Click to expand...
Click to collapse
Hello
I had the same problem with REMOTE COMMAND NOT ALLOWED till i managed to solve it.
1st thing you need to clean that ANDROID folder you made on C: drive.Install all from the begining including flashtool.Boot windows to install unsigned drivers.In the flash tool folder youll find the driver downloader,just enable usb debugging and choose Mass Storage not MTP .; You have 4 options usb debug on/off and usb connectivity MTP or Mas Storage ;with every version selected connect and disconnect from pc with flashtool running.
When you use Fastboot start the flashtool and close it if it cant kill ADB (that assuming you succeeded in installing drivers).
Good Luck
Please tell me D6603 testpoint
bgbgtbvan said:
Please tell me D6603 testpoint
Click to expand...
Click to collapse
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
john abruzzi said:
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
Click to expand...
Click to collapse
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
mihir762000 said:
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
Click to expand...
Click to collapse
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Omario-242 said:
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Click to expand...
Click to collapse
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
mihir762000 said:
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
Click to expand...
Click to collapse
The green led indicates flash mode so the problem is probably on your PC not detecting it properly. Does it show up in the system manager of windows if you plug it in at all? (Like a new device/android with a yellow triangle)
You could also try to fastboot a recovery and flashing a ROM from there. Not sure if it works but that's what I would try.
i m not even able to fastboot a recovery ...tried twrp and cwm both of them...
Me too
in my phone after charging 24h, only the red LED blinks, this is not normal any suggestions?
--------------edit
ok another week and still nothing
maybe I'll describe the problem:
I wanted to upload clean soft 5.1.1 and flash it
after the phone turned off it's start in recovery i used zip with SU and the phone turned off with no respond i try too reset (vol- + vol+ + power) but no reaction
there were no three vib
so I found that you have to reset the button under the sd flip
after this treatment you already know the charging of 3 days and only the red LED blinks
So any suggestions??
|
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
ibo90p said:
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
Click to expand...
Click to collapse
Like you I have a Xperia Z3 mines the 6633 variant.. Signs were showing it to be hard bricked, for example:
No led charge indication!
No power led!
No fastboot leds!
No USB detection sound when plugging into windows.
Literally a Z3 that was essentially a glass brick I bought off ebay for £6.50 GBP for spares/repair.
Since I had a bricked device, I had nothing to loose.
I applied heat to the rear glass with a hair drier & removed the panel, I removed the battery ribbon cable & plugged in via USB only to find the phone would show LEDs so put it on charge.
The Z3 now goes into flash mode, so then re-flashed a stock ROM from flashtool. I did a apps log & user data wipe, cust reset & fota reset.
To date I have no idea why the phone would not take a charge before or even detect via USB, though Id say give this method a go, you may be surprised!!
Good luck

[Q] Xperia C3 won't open

I rooted my brother's Sony Xperia C3 via Framaroot and everything seemed fine. Then, I installed MobileUncle MTK Tools and flashed TWRP recovery. Lastly, I installed Xposed Installer, went to Framework, Update/Install, then chose the reboot option. I've waited for the device to open but it didn't! I tried using Power and Volume + and nothing is happening. The same with Power and Volume -, still no display. I tried to plug it with its charger, then red led light shows. The light is on for quite some time, then it blinked, and gone, when I pushed the Power and Volume buttons again while charging, the red led light just show up. Please help me what should I do. Please..

Sony Z3 D6633 is dead , wiped system accidentally ,Led not Blinking, screen blackout

Hello There
I was trying to hard reset my Sony Z3 D6633 and I firstly wiped the Rom then after that I tried to install Stock Rom using "Sony Mobile Flasher by Androxyde" , unfortunately the power went of while it was flashing and now the phone doesn't even boot or show any thing on the screen , and the led doesn't even blink , I tried the following :
-pressing the volume down then connecting it to the flasher (No Response)
-pressing the yellow reset button in sim tray 10 times then connecting the charger (No Response)
-holding volume up and power together (No response)
I'm currently putting it in charger but it doesn't give any response , I think I deleted an important part in the system , is there's any software that could help me ,if someone could guide me I would be very grateful for him/her
Usually a normal flash with a flash tool shouldn't brick your device in a way that it can't enter stock recovery or download/flash mode.
Did you check the device manager when connecting with volume up/down?
You can try EMMA by Sony to flash full stock, but you need to follow a tutorial to set it up (there's a specific file you need to put in the install directory of the program to skip the devs login).
When connecting the charger does the red LED light up?
Resolved
Sorry for the long absence, after three days of posting this i was about to give up until I plugged my phone into the charger and the led turned on which was a good sign that now I know that the device is still working, after charging it for a couple of hours I connected it to the PC and used "Sony PC Companion" and followed it's steps, and the device was restored to it's original firmware.:laugh::laugh::laugh:

Brick after flashing new rom.

Hi,
I wanted to change my rom to newest version of CarbonROM (7.x.x). I downloaded new rom, copied this onto my sd card, then I rebooted my phone to recovery where I wiped system, data, cache and dalvik. Later I flashed new rom from .zip file, everything went fine, so I rebooted my device and then I realized that it's not starting anymore. I was holding power button but there was only short vibration signal and anything more, when I connect my xperia z3 (d6603) to charger, only red light is blinking, when I'm trying to start device while it's connected to charger, red light is not blinking but it shines continously till I release power button. When I'm holding power and volume up there are only three short vibrations and that's all, they are repeating till I release buttons (this only happens when xperia is connected to charger or computer in other situation there is no response for power and volume up). Flashtool says that I have to install drivers, but they're already installed, device manager shows my phone as uknown device. But when I'm connecting my phone to computer, there is this specific sound from windows and flashtool shows that 'Device disconnected', when I'm disconnecting it. Is there any hope for my phone? Can I try anything more?
well try to enter fastbootmode and flash a recovery.
Similar issue here, I have a d6603 and after using GiefRoot & NUT's DualRecovery I succesfully entered TWRP and attempted to install CarbonROM (latest: device-z3 on the official website)
Now my phone won't boot until I re-flash an older version of stock... any help would be greatly appreciated!
1. Followed this guide: xda's Z3 forum: guide-rootrecovery-how-to-root-install-t3017056
2. boot into recovery, turn off zip verification
3. install CarbonMOD's zipfile
What'd I miss? :S

Categories

Resources