Sony Z3 D6633 is dead , wiped system accidentally ,Led not Blinking, screen blackout - Xperia Z3 Q&A, Help & Troubleshooting

Hello There
I was trying to hard reset my Sony Z3 D6633 and I firstly wiped the Rom then after that I tried to install Stock Rom using "Sony Mobile Flasher by Androxyde" , unfortunately the power went of while it was flashing and now the phone doesn't even boot or show any thing on the screen , and the led doesn't even blink , I tried the following :
-pressing the volume down then connecting it to the flasher (No Response)
-pressing the yellow reset button in sim tray 10 times then connecting the charger (No Response)
-holding volume up and power together (No response)
I'm currently putting it in charger but it doesn't give any response , I think I deleted an important part in the system , is there's any software that could help me ,if someone could guide me I would be very grateful for him/her

Usually a normal flash with a flash tool shouldn't brick your device in a way that it can't enter stock recovery or download/flash mode.
Did you check the device manager when connecting with volume up/down?
You can try EMMA by Sony to flash full stock, but you need to follow a tutorial to set it up (there's a specific file you need to put in the install directory of the program to skip the devs login).

When connecting the charger does the red LED light up?

Resolved
Sorry for the long absence, after three days of posting this i was about to give up until I plugged my phone into the charger and the led turned on which was a good sign that now I know that the device is still working, after charging it for a couple of hours I connected it to the PC and used "Sony PC Companion" and followed it's steps, and the device was restored to it's original firmware.:laugh::laugh::laugh:

Related

Tutorial: Fix Xperia C softbrick with red led and no Sony logo

Fix Xperia C Red Light brick
Are you facing that the red led on your device blinks and there is no other signs of life? Then you are in the correct thread, I faced this issue when flashing a corrupted recovery but then I found out a easy way to fix it without opening the device or sending it in to Sony.
Requirements:
Xperia C with red light softbrick
MicroUSB Cable
Sony Update Service
Click to expand...
Click to collapse
1. The first thing you need to do is to make sure that you have downloaded Sony Update Service and have installed it onto your PC from the link above, if not, do it now.
2. Now launch Sony Update Service and select Xperia C in the list and then press Next.
3. Hold the Volume Up button and plugin microusbcable while doing so, if that doesn't work for you, hold power + volume up and plugin the microusbcable while doing. Keep holding button combination for a few seconds and wait for a green light on your phone, if it appears check on
your PC so that it's detected.
4. Wait while the firmware is being downloaded and reinstalled on your phone and enjoy your working device!
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
chauhanjayc said:
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
Click to expand...
Click to collapse
I flashed a faulty recovery using mobileuncles and there was no signs of life other than a red led liggt, and holding power + volume up works just fine and it went into flashmode.
I have the same issue.
I organized xperia light rom for our xperia c, I flashed it from custom recovery. Phone is completely dead now.
There is a just red light, phone does not go into download or fastboot mode. Pc Companion, Sony Update Center, Wmshua Flashtool do not recognize the phone.
Any suggestion with that?
I don't have warranty, my last option is to pay money for technical service.
this worked for me but instead of POWER+VOL UP i used POWER+VOL DOWN
thanks
thank, i like this forum
worth to try... (hope it won't happen to me :laugh: )
I have experienced this too, however, instead of using the Sony Update Service, I used the Sony PC Companion. At first it was not working, so I did a hard reset on the phone (press the button at the back). I held the power+up button while inserting the cable, and finally it was detected by Sony. It will reset your device to factory settings though.
seiferfury said:
I have experienced this too, however, instead of using the Sony Update Service, I used the Sony PC Companion. At first it was not working, so I did a hard reset on the phone (press the button at the back). I held the power+up button while inserting the cable, and finally it was detected by Sony. It will reset your device to factory settings though.
Click to expand...
Click to collapse
How did it
How Catch 4 buttons simultaneously
Please reply to the importance of
Im in the same scenario.. I tried all the procedures here but i failed.. I noticed that when i connect it, it disconnects after a while along with blinking of led light then reconnect again. And my PC detects it as unknown device.. I tried to install ADB driver but it also fails. Please help me.. Thanks. Sorry about my English
zergmac023 said:
Im in the same scenario.. I tried all the procedures here but i failed.. I noticed that when i connect it, it disconnects after a while along with blinking of led light then reconnect again. And my PC detects it as unknown device.. I tried to install ADB driver but it also fails. Please help me.. Thanks. Sorry about my English
Click to expand...
Click to collapse
If you flash a different device's rom, it happens. If you replace your motherboard, it will work again.
(
TacoNikky said:
If you flash a different device's rom, it happens. If you replace your motherboard, it will work again.
Click to expand...
Click to collapse
Which probably crying::crying::crying:
yeubeo168 said:
Which probably crying::crying::crying:
Click to expand...
Click to collapse
I have bought motherboard from china http://www.yoybuy.com/en/show/37431065583/ from this seller.
It took 20 days to arrive to Turkey. I have changed my motherboard and my phone is back right now :victory:
It works like a charm. Model number changed, it shows s39h but phone works like old days :good:
A detailed guide :
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
It worked!!!!!
GethPrime said:
Fix Xperia C Red Light brick
Are you facing that the red led on your device blinks and there is no other signs of life? Then you are in the correct thread, I faced this issue when flashing a corrupted recovery but then I found out a easy way to fix it without opening the device or sending it in to Sony.
Requirements:
1. The first thing you need to do is to make sure that you have downloaded Sony Update Service and have installed it onto your PC from the link above, if not, do it now.
2. Now launch Sony Update Service and select Xperia C in the list and then press Next.
3. Hold the Volume Up button and plugin microusbcable while doing so, if that doesn't work for you, hold power + volume up and plugin the microusbcable while doing. Keep holding button combination for a few seconds and wait for a green light on your phone, if it appears check on
your PC so that it's detected.
4. Wait while the firmware is being downloaded and reinstalled on your phone and enjoy your working device!
Click to expand...
Click to collapse
It worked for my Xperia M (rooted on JB 4.3) with a locked bootloader which was STUCK on bootloop screen and when I did the whole thing with holding the power and volume up button (after I let the battery die after so many bootloops it did), FINALLY I was able to take it to flashmode, while I had selected from Sony PC Companion to repair my phone, and after 3-4 tries, I DID IT!!! Thank you so much for this thread ( I DEFINITELY pressed the "thanks" button), it really SAVED ME time and money (because I was planning to send it to Sony to fix it and you ALL know how bastards Sony is)!!!! And to all those of you who are DESPERATE to fix their phone (I hope you read this thread), DON'T PANIC, and DON'T GIVE UP!!! It took me 2 days of searching the web, and FINALLY I MADE IT!!! There are ALWAYS solutions to these kinds of problems!!!!
red light
dear friends please help me. I wanted to install cwm recovery with mobile uncle tools. when I placed recovery.img to phone memory(not in any folder), it didn't find the file, but when in sd card(not in any folder) it succesfully find. I selected and flashed, but the phone shut down and didn't start anymore. yesterday, when plugging to charge the red light under the screen was blinking. but today, it just stays on, not blinking, but after some time, goes off again, and start blinking. when I connect to PC, first it connects, after some time connection is lost and green light passes to red again, after some time it again connects. I tried Sony Update Service and PC Companion, didn't work. Please help...
Need help
same here only red light is blinking,,,i tried doing Power+vol up and Power+vol down and by inserting cable also...it just show a red light when plugged in
i'm also having the same problem....somebody please help!!!!really need to use it
kamran.kerim said:
dear friends please help me. I wanted to install cwm recovery with mobile uncle tools. when I placed recovery.img to phone memory(not in any folder), it didn't find the file, but when in sd card(not in any folder) it succesfully find. I selected and flashed, but the phone shut down and didn't start anymore. yesterday, when plugging to charge the red light under the screen was blinking. but today, it just stays on, not blinking, but after some time, goes off again, and start blinking. when I connect to PC, first it connects, after some time connection is lost and green light passes to red again, after some time it again connects. I tried Sony Update Service and PC Companion, didn't work. Please help...
Click to expand...
Click to collapse
i'm also having the same problem....somebody please help!!!!really need to use it
chauhanjayc said:
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
Click to expand...
Click to collapse
Does that mean phone is dead?
choxx said:
Does that mean phone is dead?
Click to expand...
Click to collapse
no all you need stock kernel
you can either google it or download ftf and check all except kernel
done

Sony Xperia Z3 HARD BRICKED

Hi. My device is hardbricked. I see no lights while charging. Flashtool doesn't see my device.how can i fix this?
Edit:Easily fixed it.I plugged my device into the computer.I entered platform-tools and flashed boot.img.I saw "waiting for device" And i pressed volume up and power buttons. Suddenly boot flashed and i recovered my phone
You are very unlikely to have hard bricked it unless you have unlocked the boot and flashed something wrong.
If you did this please help us help you by telling us what you did just before this happened.
Also, just leave the phone on charge (Wall charger) for 24 hours and then see what happens.
In the mean time read this
solution for no LEDs no response no fastboot devices.
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Fastboot remote command not allowed SOLVED
stevenmanzano said:
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Click to expand...
Click to collapse
Hello
I had the same problem with REMOTE COMMAND NOT ALLOWED till i managed to solve it.
1st thing you need to clean that ANDROID folder you made on C: drive.Install all from the begining including flashtool.Boot windows to install unsigned drivers.In the flash tool folder youll find the driver downloader,just enable usb debugging and choose Mass Storage not MTP .; You have 4 options usb debug on/off and usb connectivity MTP or Mas Storage ;with every version selected connect and disconnect from pc with flashtool running.
When you use Fastboot start the flashtool and close it if it cant kill ADB (that assuming you succeeded in installing drivers).
Good Luck
Please tell me D6603 testpoint
bgbgtbvan said:
Please tell me D6603 testpoint
Click to expand...
Click to collapse
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
john abruzzi said:
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
Click to expand...
Click to collapse
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
mihir762000 said:
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
Click to expand...
Click to collapse
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Omario-242 said:
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Click to expand...
Click to collapse
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
mihir762000 said:
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
Click to expand...
Click to collapse
The green led indicates flash mode so the problem is probably on your PC not detecting it properly. Does it show up in the system manager of windows if you plug it in at all? (Like a new device/android with a yellow triangle)
You could also try to fastboot a recovery and flashing a ROM from there. Not sure if it works but that's what I would try.
i m not even able to fastboot a recovery ...tried twrp and cwm both of them...
Me too
in my phone after charging 24h, only the red LED blinks, this is not normal any suggestions?
--------------edit
ok another week and still nothing
maybe I'll describe the problem:
I wanted to upload clean soft 5.1.1 and flash it
after the phone turned off it's start in recovery i used zip with SU and the phone turned off with no respond i try too reset (vol- + vol+ + power) but no reaction
there were no three vib
so I found that you have to reset the button under the sd flip
after this treatment you already know the charging of 3 days and only the red LED blinks
So any suggestions??
|
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
ibo90p said:
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
Click to expand...
Click to collapse
Like you I have a Xperia Z3 mines the 6633 variant.. Signs were showing it to be hard bricked, for example:
No led charge indication!
No power led!
No fastboot leds!
No USB detection sound when plugging into windows.
Literally a Z3 that was essentially a glass brick I bought off ebay for £6.50 GBP for spares/repair.
Since I had a bricked device, I had nothing to loose.
I applied heat to the rear glass with a hair drier & removed the panel, I removed the battery ribbon cable & plugged in via USB only to find the phone would show LEDs so put it on charge.
The Z3 now goes into flash mode, so then re-flashed a stock ROM from flashtool. I did a apps log & user data wipe, cust reset & fota reset.
To date I have no idea why the phone would not take a charge before or even detect via USB, though Id say give this method a go, you may be surprised!!
Good luck

Xperia Z5 E6683 dual - Boot looping

Hi all,
i have been attempting to root my Z5 dual, i have unlocked the bootloader no issues.
but when i got to the stage of trying to flash TWRP.img thats where i ran into issues, it flashed ok - but now my phone won't boot - it is just stuck on the white sony screen.
the only way to turn it off is to hard reset ( hold power button and the volume buttons until it vibrates 3 times ) - then it will power on if i hold down the volume key and press the power button - or plug it into a wall charger..
when it does turn on it gets to the sony screen - the LED goes white, then amber for a second or two then the LED turns off..
im not too sure what to do now guys - my laptop wont pick up my device any more so it seems as though i have soft bricked it. i have also tried the P.c companion thing also but it says i have modded software so it can't do it lol.
help me pls
Hi,
If you already have installed the z5 drivers on you laptop (i assume this is the case because pc companion is installed and detect your phone), guess you can try to flash a stock Rom of your contry using flastool, your laptop will normally detect your z5 cause you connect it thanks to a special manipulation (vol - + connexion while button is maintained) .
Try this if everything goes great, it will fix the bootloop issue.
I got the same prob and eveb worse (battery 0% and wasnt charging) i hard rest it ( vol up+ power) and left it for 10 seconds then i pluged into my laptop while holding vol down and suprisly my laptop detected my phone and i was saved ! But i was scared about the flashig procsess as my battery was 0% lol
Baradoura said:
Hi,
If you already have installed the z5 drivers on you laptop (i assume this is the case because pc companion is installed and detect your phone), guess you can try to flash a stock Rom of your contry using flastool, your laptop will normally detect your z5 cause you connect it thanks to a special manipulation (vol - + connexion while button is maintained) .
Try this if everything goes great, it will fix the bootloop issue.
Click to expand...
Click to collapse
hi there,
thanks for your response,
my phone is no longer being recognized by my laptop - i have tried a bunch of things - it doesn't boot loop any more - if i turn it on ( well attempt to) it will just show a no battery picture - out of 20 times of trying to get it into fast boot mode it the green LED will flash for a second or so and then it will turn off again.
i have tried to leave my phone on charge for a whole weekend to see if it worked - but it still shows that it has no battery
Branga said:
hi there,
thanks for your response,
my phone is no longer being recognized by my laptop - i have tried a bunch of things - it doesn't boot loop any more - if i turn it on ( well attempt to) it will just show a no battery picture - out of 20 times of trying to get it into fast boot mode it the green LED will flash for a second or so and then it will turn off again.
i have tried to leave my phone on charge for a whole weekend to see if it worked - but it still shows that it has no battery
Click to expand...
Click to collapse
Flash your phone firmware with Flashtool and you would solve a problems.
Sent from my Sony Xperia Z5
Allek84 said:
Flash your phone firmware with Flashtool and you would solve a problems.
Sent from my Sony Xperia Z5
Click to expand...
Click to collapse
thanks for your response - i have been trying but my phone wont get into fast boot mode / flashtool wont pick up my phone even if my p.c does
Branga said:
thanks for your response - i have been trying but my phone wont get into fast boot mode / flashtool wont pick up my phone even if my p.c does
Click to expand...
Click to collapse
You dont need put your phone in fastboot mode than flashmode.
Sent from my Sony Xperia Z5
flashmode not fastboot mode . make sure u install flashtool drivers and fastboot drivers and ur devices drivers as well. dont skip this just cause u think u did it. if you are on a windows pc windows 8 - windows 10 , you have to disable signature verification in order to install the drivers. if you dont know about that , tell me to explain . apart from that , what commmand did you use to flash twrp? fastboot flash boot twrp.img or fastboot flash recovery twrp.img? if you did the first , thats why it doesnt boot. and apart from that , can you at least enter the recovery ?

Help!! Fix Xperia C C2305 dead boot( Hard brick)

I flashed a wrong recovery img... now the Xperia c2305 is not booting. It is only showing red light when i connect to computer.
I tried the PC companion method and wmshua flash tool. but it doesn't detect my phone.
How to repair this ??
How can i repair this using testpoint method or Meta mode method??
so your pc doesn't detect your phone?
when you plug your usb + press volume down at the same time green light should appear, what happen in your case?
same problem
tataboga said:
so your pc doesn't detect your phone?
when you plug your usb + press volume down at the same time green light should appear, what happen in your case?
Click to expand...
Click to collapse
I am also facing same problem and yes when I press volume down while plugging in, the orange light blinks once in 10sec but the device doesn't get recognized or nothing is happening on the device side.
this is how I solved it
subhashvnr said:
I am also facing same problem and yes when I press volume down while plugging in, the orange light blinks once in 10sec but the device doesn't get recognized or nothing is happening on the device side.
Click to expand...
Click to collapse
I flashed a wrong recovery.img and that's it the phone wouldn't boot. If I connect to pc companion it just shows blinking orange light but is not detected. This is what I have found out
1. the phone is struck in a bootloop which drains all the battery -- Press the hard reset button at the back of the phone to break from this loop
2. Put the phone on charge for a while ( now it should at least show a steady orange led indicative of charging) as this is needed for software repair
3. Use software repair in sony pc companion for restoring stock android os. -- if the phone is not detected when you plug in while holding volume down key, then release the key once and again press and hold it while the usb is still connected (this worked for me)
4. once the phone is detected and repairing has started the process may fail in between and pc companion may say repair failed!(don't loose hope) -- disconnect from pc, press hard reset button again and repeat steps 3 & 4. ( the repairing process will resume and will be completed slowly)
Note: If your phone is struck at sony logo or is not fully switched off press and hold the power+volume up key together to first switch if off and then connect to pc companion
subhashvnr said:
I flashed a wrong recovery.img and that's it the phone wouldn't boot. If I connect to pc companion it just shows blinking orange light but is not detected. This is what I have found out
1. the phone is struck in a bootloop which drains all the battery -- Press the hard reset button at the back of the phone to break from this loop
2. Put the phone on charge for a while ( now it should at least show a steady orange led indicative of charging) as this is needed for software repair
3. Use software repair in sony pc companion for restoring stock android os. -- if the phone is not detected when you plug in while holding volume down key, then release the key once and again press and hold it while the usb is still connected (this worked for me)
4. once the phone is detected and repairing has started the process may fail in between and pc companion may say repair failed!(don't loose hope) -- disconnect from pc, press hard reset button again and repeat steps 3 & 4. ( the repairing process will resume and will be completed slowly)
Note: If your phone is struck at sony logo or is not fully switched off press and hold the power+volume up key together to first switch if off and then connect to pc companion
Click to expand...
Click to collapse
Where is the hard reset button. I haven't been able to find it.
LawrenceMyers666 said:
Where is the hard reset button. I haven't been able to find it.
Click to expand...
Click to collapse
It is pin hole above the battery beside the sim slots
Hi,My sony xperia C phone is not booting up. I think it is stucked at bootloop. Tried to repair it using Xperia Companion but it is showing that the software repair is no longer supported for this phone. Can someone help me on this?
Plz help
Any body please help i have xperia c2305 im not able to flash any rom in it it says i have to enable usb debugging but currently my phne is not turning on it is only showing sony logo is there is any way to flash rom in it.?

[help] Z3 Completely dead (no vibration / no led / no charging / no flash mode)

Hello everybody!
I recently wanted to use a custom rom..
So I Flashed the stock firmware the .291 build. after that I wanted to flash twrp recovery.
So I downgraded the kernel to ,575 then flashed the recovery file, and from the recovery I flashed the Existenz rom (.291 based).
Then I rebooted the device,, Unfortunately I got a boot loop on SONY logo.
So I reflashed the stock firmware (.291) throw flashtool. but flash didn't complete,,, and I got boot loop again.
after that I DON'T KNOW why I flashed the .575 kernel.. Flash completed,, phone turned off
then it's COMPLETELY DEAD.. no signs of life
I tried every power- volume combinations, but I got no vibrations nor leds. and the charging sign doesn't appear when connecting the device to a power supply.
I only hear the connection sound when I connect the device to the computer and press volume down + power button for 10 secs, but it shows nothing on computer!
Any help would be appreciated
Your best bet if it shows no sign of life is to charge for a few hours to make sure it has enough battery.
Hopefully the red light comes on at some point. Either way try leaving it plugged in for a few hours.
Then you can try flashing again.
Ensure all the drivers are properly installed for flashtool.
Ensure you have the correct ftf for your device!
Start flash mode for a full .291 ftf and plug the phone in while holding down the volume down button as normal.
Try this repeatedly until you get a connection.
Alternatively you can wrap a very tight rubber band around the volume down key and connect it while flashtool is in flashmode.
If you're lucky a connection will be made and flashtool will have time to flash the firmware.
Persistence is key here. Many times a brick can be saved but it can take a long time.
Good luck and I hope it works
keep it on charge overnight.flash again when led turns on

Categories

Resources