Xperia Z5 E6683 dual - Boot looping - Xperia Z5 Q&A, Help & Troubleshooting

Hi all,
i have been attempting to root my Z5 dual, i have unlocked the bootloader no issues.
but when i got to the stage of trying to flash TWRP.img thats where i ran into issues, it flashed ok - but now my phone won't boot - it is just stuck on the white sony screen.
the only way to turn it off is to hard reset ( hold power button and the volume buttons until it vibrates 3 times ) - then it will power on if i hold down the volume key and press the power button - or plug it into a wall charger..
when it does turn on it gets to the sony screen - the LED goes white, then amber for a second or two then the LED turns off..
im not too sure what to do now guys - my laptop wont pick up my device any more so it seems as though i have soft bricked it. i have also tried the P.c companion thing also but it says i have modded software so it can't do it lol.
help me pls

Hi,
If you already have installed the z5 drivers on you laptop (i assume this is the case because pc companion is installed and detect your phone), guess you can try to flash a stock Rom of your contry using flastool, your laptop will normally detect your z5 cause you connect it thanks to a special manipulation (vol - + connexion while button is maintained) .
Try this if everything goes great, it will fix the bootloop issue.

I got the same prob and eveb worse (battery 0% and wasnt charging) i hard rest it ( vol up+ power) and left it for 10 seconds then i pluged into my laptop while holding vol down and suprisly my laptop detected my phone and i was saved ! But i was scared about the flashig procsess as my battery was 0% lol

Baradoura said:
Hi,
If you already have installed the z5 drivers on you laptop (i assume this is the case because pc companion is installed and detect your phone), guess you can try to flash a stock Rom of your contry using flastool, your laptop will normally detect your z5 cause you connect it thanks to a special manipulation (vol - + connexion while button is maintained) .
Try this if everything goes great, it will fix the bootloop issue.
Click to expand...
Click to collapse
hi there,
thanks for your response,
my phone is no longer being recognized by my laptop - i have tried a bunch of things - it doesn't boot loop any more - if i turn it on ( well attempt to) it will just show a no battery picture - out of 20 times of trying to get it into fast boot mode it the green LED will flash for a second or so and then it will turn off again.
i have tried to leave my phone on charge for a whole weekend to see if it worked - but it still shows that it has no battery

Branga said:
hi there,
thanks for your response,
my phone is no longer being recognized by my laptop - i have tried a bunch of things - it doesn't boot loop any more - if i turn it on ( well attempt to) it will just show a no battery picture - out of 20 times of trying to get it into fast boot mode it the green LED will flash for a second or so and then it will turn off again.
i have tried to leave my phone on charge for a whole weekend to see if it worked - but it still shows that it has no battery
Click to expand...
Click to collapse
Flash your phone firmware with Flashtool and you would solve a problems.
Sent from my Sony Xperia Z5

Allek84 said:
Flash your phone firmware with Flashtool and you would solve a problems.
Sent from my Sony Xperia Z5
Click to expand...
Click to collapse
thanks for your response - i have been trying but my phone wont get into fast boot mode / flashtool wont pick up my phone even if my p.c does

Branga said:
thanks for your response - i have been trying but my phone wont get into fast boot mode / flashtool wont pick up my phone even if my p.c does
Click to expand...
Click to collapse
You dont need put your phone in fastboot mode than flashmode.
Sent from my Sony Xperia Z5

flashmode not fastboot mode . make sure u install flashtool drivers and fastboot drivers and ur devices drivers as well. dont skip this just cause u think u did it. if you are on a windows pc windows 8 - windows 10 , you have to disable signature verification in order to install the drivers. if you dont know about that , tell me to explain . apart from that , what commmand did you use to flash twrp? fastboot flash boot twrp.img or fastboot flash recovery twrp.img? if you did the first , thats why it doesnt boot. and apart from that , can you at least enter the recovery ?

Related

Tutorial: Fix Xperia C softbrick with red led and no Sony logo

Fix Xperia C Red Light brick
Are you facing that the red led on your device blinks and there is no other signs of life? Then you are in the correct thread, I faced this issue when flashing a corrupted recovery but then I found out a easy way to fix it without opening the device or sending it in to Sony.
Requirements:
Xperia C with red light softbrick
MicroUSB Cable
Sony Update Service
Click to expand...
Click to collapse
1. The first thing you need to do is to make sure that you have downloaded Sony Update Service and have installed it onto your PC from the link above, if not, do it now.
2. Now launch Sony Update Service and select Xperia C in the list and then press Next.
3. Hold the Volume Up button and plugin microusbcable while doing so, if that doesn't work for you, hold power + volume up and plugin the microusbcable while doing. Keep holding button combination for a few seconds and wait for a green light on your phone, if it appears check on
your PC so that it's detected.
4. Wait while the firmware is being downloaded and reinstalled on your phone and enjoy your working device!
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
chauhanjayc said:
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
Click to expand...
Click to collapse
I flashed a faulty recovery using mobileuncles and there was no signs of life other than a red led liggt, and holding power + volume up works just fine and it went into flashmode.
I have the same issue.
I organized xperia light rom for our xperia c, I flashed it from custom recovery. Phone is completely dead now.
There is a just red light, phone does not go into download or fastboot mode. Pc Companion, Sony Update Center, Wmshua Flashtool do not recognize the phone.
Any suggestion with that?
I don't have warranty, my last option is to pay money for technical service.
this worked for me but instead of POWER+VOL UP i used POWER+VOL DOWN
thanks
thank, i like this forum
worth to try... (hope it won't happen to me :laugh: )
I have experienced this too, however, instead of using the Sony Update Service, I used the Sony PC Companion. At first it was not working, so I did a hard reset on the phone (press the button at the back). I held the power+up button while inserting the cable, and finally it was detected by Sony. It will reset your device to factory settings though.
seiferfury said:
I have experienced this too, however, instead of using the Sony Update Service, I used the Sony PC Companion. At first it was not working, so I did a hard reset on the phone (press the button at the back). I held the power+up button while inserting the cable, and finally it was detected by Sony. It will reset your device to factory settings though.
Click to expand...
Click to collapse
How did it
How Catch 4 buttons simultaneously
Please reply to the importance of
Im in the same scenario.. I tried all the procedures here but i failed.. I noticed that when i connect it, it disconnects after a while along with blinking of led light then reconnect again. And my PC detects it as unknown device.. I tried to install ADB driver but it also fails. Please help me.. Thanks. Sorry about my English
zergmac023 said:
Im in the same scenario.. I tried all the procedures here but i failed.. I noticed that when i connect it, it disconnects after a while along with blinking of led light then reconnect again. And my PC detects it as unknown device.. I tried to install ADB driver but it also fails. Please help me.. Thanks. Sorry about my English
Click to expand...
Click to collapse
If you flash a different device's rom, it happens. If you replace your motherboard, it will work again.
(
TacoNikky said:
If you flash a different device's rom, it happens. If you replace your motherboard, it will work again.
Click to expand...
Click to collapse
Which probably crying::crying::crying:
yeubeo168 said:
Which probably crying::crying::crying:
Click to expand...
Click to collapse
I have bought motherboard from china http://www.yoybuy.com/en/show/37431065583/ from this seller.
It took 20 days to arrive to Turkey. I have changed my motherboard and my phone is back right now :victory:
It works like a charm. Model number changed, it shows s39h but phone works like old days :good:
A detailed guide :
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
It worked!!!!!
GethPrime said:
Fix Xperia C Red Light brick
Are you facing that the red led on your device blinks and there is no other signs of life? Then you are in the correct thread, I faced this issue when flashing a corrupted recovery but then I found out a easy way to fix it without opening the device or sending it in to Sony.
Requirements:
1. The first thing you need to do is to make sure that you have downloaded Sony Update Service and have installed it onto your PC from the link above, if not, do it now.
2. Now launch Sony Update Service and select Xperia C in the list and then press Next.
3. Hold the Volume Up button and plugin microusbcable while doing so, if that doesn't work for you, hold power + volume up and plugin the microusbcable while doing. Keep holding button combination for a few seconds and wait for a green light on your phone, if it appears check on
your PC so that it's detected.
4. Wait while the firmware is being downloaded and reinstalled on your phone and enjoy your working device!
Click to expand...
Click to collapse
It worked for my Xperia M (rooted on JB 4.3) with a locked bootloader which was STUCK on bootloop screen and when I did the whole thing with holding the power and volume up button (after I let the battery die after so many bootloops it did), FINALLY I was able to take it to flashmode, while I had selected from Sony PC Companion to repair my phone, and after 3-4 tries, I DID IT!!! Thank you so much for this thread ( I DEFINITELY pressed the "thanks" button), it really SAVED ME time and money (because I was planning to send it to Sony to fix it and you ALL know how bastards Sony is)!!!! And to all those of you who are DESPERATE to fix their phone (I hope you read this thread), DON'T PANIC, and DON'T GIVE UP!!! It took me 2 days of searching the web, and FINALLY I MADE IT!!! There are ALWAYS solutions to these kinds of problems!!!!
red light
dear friends please help me. I wanted to install cwm recovery with mobile uncle tools. when I placed recovery.img to phone memory(not in any folder), it didn't find the file, but when in sd card(not in any folder) it succesfully find. I selected and flashed, but the phone shut down and didn't start anymore. yesterday, when plugging to charge the red light under the screen was blinking. but today, it just stays on, not blinking, but after some time, goes off again, and start blinking. when I connect to PC, first it connects, after some time connection is lost and green light passes to red again, after some time it again connects. I tried Sony Update Service and PC Companion, didn't work. Please help...
Need help
same here only red light is blinking,,,i tried doing Power+vol up and Power+vol down and by inserting cable also...it just show a red light when plugged in
i'm also having the same problem....somebody please help!!!!really need to use it
kamran.kerim said:
dear friends please help me. I wanted to install cwm recovery with mobile uncle tools. when I placed recovery.img to phone memory(not in any folder), it didn't find the file, but when in sd card(not in any folder) it succesfully find. I selected and flashed, but the phone shut down and didn't start anymore. yesterday, when plugging to charge the red light under the screen was blinking. but today, it just stays on, not blinking, but after some time, goes off again, and start blinking. when I connect to PC, first it connects, after some time connection is lost and green light passes to red again, after some time it again connects. I tried Sony Update Service and PC Companion, didn't work. Please help...
Click to expand...
Click to collapse
i'm also having the same problem....somebody please help!!!!really need to use it
chauhanjayc said:
Have tried this on my bricked xperia c red led
Few weeks back no success
Logic
If you flash wrong recovery there is no way to boot in any mode
I can say this with 100% confident as I had spent full 3 days and tried every thing...
If u wona check goto custome mod for xperia c thred and get recovery installed
Then try this and share results
All the best
Click to expand...
Click to collapse
Does that mean phone is dead?
choxx said:
Does that mean phone is dead?
Click to expand...
Click to collapse
no all you need stock kernel
you can either google it or download ftf and check all except kernel
done

[Q] Help phone is not turning on red flashes

Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
callum123457 said:
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
Click to expand...
Click to collapse
when you connect your phone in flashmode green light should stay on (press & hold vol down then plug usb in)
it should show
"device connected in flashmode"
IF you want fastboot mode
when you connect your phone in fastboot mode blue light should stay on (press & hold vol up then plug usb in)
NOTE-it should actually do bootloops....not sure why red light
callum123457 said:
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
Click to expand...
Click to collapse
Sometimes flash tool, while flashing tells me to turn on usb debugging (although its already on). So what do I do? Wait. After ten minutes(approx), device disconnects automatically and then flashtool requests me to connect in flash mode. So I disconect my usb cable and connect it again in flash mode and voila! flash begins. Worked for me, hope it works for u too..
Sent from my Xperia E dual using XDA Premium 4 mobile app
sohailferdous said:
Sometimes flash tool, while flashing tells me to turn on usb debugging (although its already on). So what do I do? Wait. After ten minutes(approx), device disconnects automatically and then flashtool requests me to connect in flash mode. So I disconect my usb cable and connect it again in flash mode and voila! flash begins. Worked for me, hope it works for u too..
Sent from my Xperia E dual using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes thats a common mistake
on flashmode connect phone in flashmode only when asked (or like you said ...you will have to do twice)
on fastboot mode your phone has to be connected in fastboot before selecting the fastboot mode
I'm having very similar trouble, i flashed FXP CM10 a little while ago until the phone stopped receiving a signal (which has happened a few times using CM10), unfortunately the battery died before i got home to flash it again. 3 days and 7 hours later and the battery still hasn't charged, i've managed to boot into android very quickly while it's connected to a wall charger but i get nothing at all if i try and connect in flashmode or fastboot.
Is the battery dead? Is there something i'm probably missing? I figured this might go to someway with hoping the OP.
[Edit: Good news! I've plugged into USB and i can get to the battery bar with the power symbol, maybe i can get to flashmode after all!]
[Edit 2:] Noticing the phone had just enough power to get to the battery/power symbol screen, held down the volume button for about a minute till it went through that cycle and managed to get it into flashmode, installed stock and plugged it into the wall. 5 mins later i hit the power button and it's working again! Hooray!
GeoH85 said:
I'm having very similar trouble, i flashed FXP CM10 a little while ago until the phone stopped receiving a signal (which has happened a few times using CM10), unfortunately the battery died before i got home to flash it again. 3 days and 7 hours later and the battery still hasn't charged, i've managed to boot into android very quickly while it's connected to a wall charger but i get nothing at all if i try and connect in flashmode or fastboot.
Is the battery dead? Is there something i'm probably missing? I figured this might go to someway with hoping the OP.
[Edit: Good news! I've plugged into USB and i can get to the battery bar with the power symbol, maybe i can get to flashmode after all!]
[Edit 2:] Noticing the phone had just enough power to get to the battery/power symbol screen, held down the volume button for about a minute till it went through that cycle and managed to get it into flashmode, installed stock and plugged it into the wall. 5 mins later i hit the power button and it's working again! Hooray!
Click to expand...
Click to collapse
use jim34 cm10 with hsr0 kernel....FXP IS CRAP for daily use
don't connect your phone to the pc until flashtool asks you to. I get that thing sometimes when I reflash a rom or kernel
Sent from my ST21i using Tapatalk

Miro bricked after flashing wrong bootloader

Hi,
I don't know what can I do now, perhaps noting. I accidentialy flashed wrong bootloader (from other xperia, not Miro). Now phone seems to be completly bricked, I can't turn it on and my PC does not see any new device after connecting phone to usb. I also tried to remove and insert battery, after this when trying to power on, there is short vibration and nothing more.
Do you have any ideas? Or I simply should to use it as brick, not as phone or put it to my toilet and wash? Thanks.
Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303
Don't worry, Your phone is not hard bricked. As you mentioned that on starting , phone is vibrating that means there are chances to recover your phone.
1.First go through this guide :Using Flashtool for Xperia devices
2.Download your current stock firmware . Visit this: Miro all official firmwares
3.Install proper drivers as mentioned in the above 1.flashtool guide.
4.Flash the firmware for your phone , according to the above 1. Flastool guide.
5.Wait untill flashing completes. start your device when you are told to do so.
Good luck :good:
Dzepar said:
Can you get in flashmode? Power button down + connect to pc. Flash proper ftf for your phone.
Sent from Xperia M2 D2303
Click to expand...
Click to collapse
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.
giaur said:
It seems I can't. I already tried this, but nothing happens. As far as I know, there should be blue led after connect. But nothing happens and PC can't see any new device.
Click to expand...
Click to collapse
You should see green light. Try this :
Pull out battery, hold power button for 10 seconds without battery. Reinstall battery, hold volume button - and connect to usb. Then follow steps that prateek.invasion gave you.
The point is you can flash ftf and restore your phone.
Good luck.
Sent from Xperia M2 D2303
Thanks, I will try. Batteery is not charging, so I need to do this quick, it was not fully charged.
Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?
giaur said:
Unfortunatly, I can't do anything. I tried to connect while Volume down + power pressed. But nothing happens, only led flashing with red color. PC can't see any new device after I connect to usb.
Any ideas?
Click to expand...
Click to collapse
I had the same issue with my xperia e after I unlocked the bootloader and installed CWM, the phone just rebooted itself at boot up. If you have installed CWM I suggest you to install a custom rom and a new kernel. That worked for me . Or ofc, if you have warranty you can send it to them. They won't be able to tell if you installed another rom since the pc doesn't recognize the phone.
I don't have cwm... trying to connect to computer with volume down pressed. After this led starts flashing red and computer can't see any device connected
Seems there is no any recovery or I can't put it to recovery mode.

Sony Xperia Z3 HARD BRICKED

Hi. My device is hardbricked. I see no lights while charging. Flashtool doesn't see my device.how can i fix this?
Edit:Easily fixed it.I plugged my device into the computer.I entered platform-tools and flashed boot.img.I saw "waiting for device" And i pressed volume up and power buttons. Suddenly boot flashed and i recovered my phone
You are very unlikely to have hard bricked it unless you have unlocked the boot and flashed something wrong.
If you did this please help us help you by telling us what you did just before this happened.
Also, just leave the phone on charge (Wall charger) for 24 hours and then see what happens.
In the mean time read this
solution for no LEDs no response no fastboot devices.
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Fastboot remote command not allowed SOLVED
stevenmanzano said:
Take two rubberbands one to hold down the power button and one to hold down the volume up button on Xperia Z3 dual. I spent a lot of time figuring this out. Alter a few minutes the phone just booted up from the dead. It worked for me 3 times. Now if someone can tell me how to fix the fastboot remote command not allowed error I'll be happy.
Click to expand...
Click to collapse
Hello
I had the same problem with REMOTE COMMAND NOT ALLOWED till i managed to solve it.
1st thing you need to clean that ANDROID folder you made on C: drive.Install all from the begining including flashtool.Boot windows to install unsigned drivers.In the flash tool folder youll find the driver downloader,just enable usb debugging and choose Mass Storage not MTP .; You have 4 options usb debug on/off and usb connectivity MTP or Mas Storage ;with every version selected connect and disconnect from pc with flashtool running.
When you use Fastboot start the flashtool and close it if it cant kill ADB (that assuming you succeeded in installing drivers).
Good Luck
Please tell me D6603 testpoint
bgbgtbvan said:
Please tell me D6603 testpoint
Click to expand...
Click to collapse
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
john abruzzi said:
you must read this
http://forum.xda-developers.com/showthread.php?t=2646405&page=54
Click to expand...
Click to collapse
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
mihir762000 said:
i have an xperia e3 d2212 stuck pon sony logo....bootloader is unlocked....i m able to enter fastboot so i flashed kernel.sin and system.sin after extracting from stock ftf but it didnt workwed...also,,i m not able to enter flash mode as the flash tool doesnt detects it in flashmode...but when i press power button and volume down the green led lights up...i have reinstalled flashtool many times and also reinstalled the drivers many times...any fix for this??
Click to expand...
Click to collapse
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Omario-242 said:
Try a different driver package from another download source and use another usb on your pc.
Maybe it works. If your device can enter flash mode it definitely can be recovered.
Click to expand...
Click to collapse
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
mihir762000 said:
first of all my phone cant enter flashmode..(just the green light lits up)..secondly,,i have tried to reinstall drivers many times and i have tried to flash the system.sin and kernel.sin of 3 diffrent ftf rom for xperia e3 dual....is there any other solution..???
Click to expand...
Click to collapse
The green led indicates flash mode so the problem is probably on your PC not detecting it properly. Does it show up in the system manager of windows if you plug it in at all? (Like a new device/android with a yellow triangle)
You could also try to fastboot a recovery and flashing a ROM from there. Not sure if it works but that's what I would try.
i m not even able to fastboot a recovery ...tried twrp and cwm both of them...
Me too
in my phone after charging 24h, only the red LED blinks, this is not normal any suggestions?
--------------edit
ok another week and still nothing
maybe I'll describe the problem:
I wanted to upload clean soft 5.1.1 and flash it
after the phone turned off it's start in recovery i used zip with SU and the phone turned off with no respond i try too reset (vol- + vol+ + power) but no reaction
there were no three vib
so I found that you have to reset the button under the sd flip
after this treatment you already know the charging of 3 days and only the red LED blinks
So any suggestions??
|
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
ibo90p said:
I‘m having the same problem, I can’t open my Xperia Z3. I tried with holding on/off button, holding volume up and on/off button, holding volume down and on/off button. When I connect it to PC, nothings happen. No vibrates, no led on, no screen on. What should I do?
Click to expand...
Click to collapse
Like you I have a Xperia Z3 mines the 6633 variant.. Signs were showing it to be hard bricked, for example:
No led charge indication!
No power led!
No fastboot leds!
No USB detection sound when plugging into windows.
Literally a Z3 that was essentially a glass brick I bought off ebay for £6.50 GBP for spares/repair.
Since I had a bricked device, I had nothing to loose.
I applied heat to the rear glass with a hair drier & removed the panel, I removed the battery ribbon cable & plugged in via USB only to find the phone would show LEDs so put it on charge.
The Z3 now goes into flash mode, so then re-flashed a stock ROM from flashtool. I did a apps log & user data wipe, cust reset & fota reset.
To date I have no idea why the phone would not take a charge before or even detect via USB, though Id say give this method a go, you may be surprised!!
Good luck

Z3 won`t charge via USB

I have a Z3 which won`t charge from anything other than magnetic cable.I tried holding volume up and pluging the cable, only blue light shows and nothing, tried holding volume down, flashes red green blue and nothing again.When i connect it only with usb phone starts with a big battery symbol but doesn`t charge...tried holding power+ vol down and vol up again nothing tried pressing the reset button near the sd slot but again no connection.Bad part is that I don`t have any drivers for it on this PC but still it does not connect...
What version of android you are at are you using stock or aosp rom or stock or custom kernals both things can affect your charging in your phone. You can download drivers from the Sony,s website and can start flashing stock roms the charging part can be the software or if you have a broken connector on your Xperia Z3
It`s 6.0.1 version, but my PC does not recognise the device...
lioton2000 said:
It`s 6.0.1 version, but my PC does not recognize the device...
Click to expand...
Click to collapse
Then my friend you are in a heap of trouble. Well sort of two more questions i need to ask your question is confusing me
Q1 can your device boot to the OS ?
Q2 Have you tried fast boot if not flash an custom recovery like TWRP
If you have the case that your phone does not boot would not detect or be recognized by either Flash mode or fastboot mode then your phone might need some work
Tech core said:
Then my friend you are in a heap of trouble. Well sort of two more questions i need to ask your question is confusing me
Q1 can your device boot to the OS ?
Q2 Have you tried fast boot if not flash an custom recovery like TWRP
If you have the case that your phone does not boot would not detect or be recognized by either Flash mode or fastboot mode then your phone might need some work
Click to expand...
Click to collapse
I gues I will have to take it sony service...

Categories

Resources