Database Info

[Q] Bricked Nexus 5? :( Need your help guys

Hi everyone, ( Newbie here)
Pardon me if something similar has already been posted before. I have major issues with my Nexus 5 which gave up on me a day back.
THe phone wont boot up and is stuck at the google logo.
I went through a few troubleshooting steps with the google technicians. We tried recovering it but that didn't work either, nor a hard reset. I dont see the dead android show up after which i can wipe the entire data and do a factory reset.
The USB Debugging feature on my phone was switched off so now if i try to unlock the bootloader using adb i can't. It says erasing but does nothing. I waited for about 25min and gave up on that.
I downloaded the stock android OS from the google website and also have adb and all the drivers installed.
Is there anyway i can get this thing up and running again? Anything at all?
Please help

fastbooting
Well the only thing I can come up with is to boot your phone into fastboot. First turn off your phone then press the power+volume down or power+volup+voldwn and then there should be a screen with an android laying on its back. If you can get that far well continue but if you can't then you can send in your phone

Sounds like you're trying to use adb commands when you should be using fastboot commands
Sent from my Android L Nexus 5 via Tapatalk

smackster said:
Well the only thing I can come up with is to boot your phone into fastboot. First turn off your phone then press the power+volume down or power+volup+voldwn and then there should be a screen with an android laying on its back. If you can get that far well continue but if you can't then you can send in your phone
Click to expand...
Click to collapse
I tried doing that but the recovery mode wont work. I only see a blank screen when i try to get into recovery mode. I dont care about my data anymore. I just hope for the phone to come back alive. How i wish the usb debugging was on

Usb debugging is irrelevant when the phone is off. If you hard power the phone off by holding power button for like 10 secs, try holding just volume down while powering up
Sent from my Android L Nexus 5 via Tapatalk

Ben36 said:
Sounds like you're trying to use adb commands when you should be using fastboot commands
Sent from my Android L Nexus 5 via Tapatalk
Click to expand...
Click to collapse
I'm sorry , i used this command
fastboot oem unlock
After that i saw
erasing. . .
Which went on for more than 25min and more. So i had to abort.

varunst said:
I'm sorry , i used this command
fastboot oem unlock
After that i saw
erasing. . .
Which went on for more than 25min and more. So i had to abort.
Click to expand...
Click to collapse
Try LG flashtool. That is your only hope. Link in my signature.

bitdomo said:
Try LG flashtool. That is your only hope. Link in my signature.
Click to expand...
Click to collapse
Could that void the warranty of my phone? I need the .dll file and the ROM or firmware whatever they call it for Nexus 5 32gb ( lg d820) I have downloaded the lg flash tool.

varunst said:
Could that void the warranty of my phone? I need the .dll file and the ROM or firmware whatever they call it for Nexus 5 32gb ( lg d820) I have downloaded the lg flash tool.
Click to expand...
Click to collapse
It could not void your warranty. This is how LG would reflash your phone. You will find lg flashtool, dll for D820 and the firmware for D820 32Gb in my lg flashtool thread. You have to use the converted firmware. Dont worry about that it is converted. It was tested by numerous people and never got any negative response.

bitdomo said:
It could not void your warranty. This is how LG would reflash your phone. You will find lg flashtool, dll for D820 and the firmware for D820 32Gb in my lg flashtool thread. You have to use the converted firmware. Dont worry about that it is converted. It was tested by numerous people and never got any negative response.
Click to expand...
Click to collapse
So i will need 3 things now..
1. LG Flash tool
2. The right .dll file
3. Firmware for D820 32gb NExus 5 (converted firmware )
Now i have to figure out how to use them

varunst said:
So i will need 3 things now..
1. LG Flash tool
2. The right .dll file
3. Firmware for D820 32gb NExus 5 (converted firmware )
Now i have to figure out how to use them
Click to expand...
Click to collapse
Yes, but you dont have to figure out anything . I have already figured out and made a thread about it. Just check my signature about LG flashtool. You will find the guide there.

bitdomo said:
Yes, but you dont have to figure out anything . I have already figured out and made a thread about it. Just check my signature about LG flashtool. You will find the guide there.
Click to expand...
Click to collapse
Btw my bootloader is locked. and USB debugging is off . Can i still go ahead?

varunst said:
Btw my bootloader is locked. and USB debugging is off . Can i still go ahead?
Click to expand...
Click to collapse
Sure. That is not a problem.

bitdomo said:
Sure. That is not a problem.
Click to expand...
Click to collapse
Cool i am going through the tutorial . Will keep you posted. Also i wanted to mention, i think some images on the tut have broken links.
Are the D820 DLL and Firmware files for 32 gb ? Does that matter?

bitdomo said:
Sure. That is not a problem.
Click to expand...
Click to collapse
What's the worst case scenario here?
Will Google still replace it for me?

varunst said:
What's the worst case scenario here?
Will Google still replace it for me?
Click to expand...
Click to collapse
Worst case scenario is that LG flashtool will stop with Erase command failed error. Google will replace your phone does not matter what happen.

bitdomo said:
Worst case scenario is that LG flashtool will stop with Erase command failed error. Google will replace your phone does not matter what happen.
Click to expand...
Click to collapse
I don't see a reason why i shouldn't try it then . Once i am done with all this i will have to install Android 4.4 on top of it right?

varunst said:
I don't see a reason why i shouldn't try it then . Once i am done with all this i will have to install Android 4.4 on top of it right?
Click to expand...
Click to collapse
You dont have to install anything to your phone. If lg flashtool will be successful then your phone will be like that when you first turned it on.

bitdomo said:
You dont have to install anything to your phone. If lg flashtool will be successful then your phone will be like that when you first turned it on.
Click to expand...
Click to collapse
The converted one says USE AT OWN RISK . Why so ? I will have to download the 32GB one right? One more question.. what are TOT's ? or TOT file? And there are 2 files inside the 32 GB one.. Which one should i download? The first or the 2nd?
THanks

varunst said:
The converted one says USE AT OWN RISK . Why so ? I will have to download the 32GB one right? One more question.. what are TOT's ? or TOT file?
THanks
Click to expand...
Click to collapse
I should remove the use at your own risk message since it have been confirmed that they dont do any trouble. Tot is the file format of the LG's firmware file format.

[Q] Bricked Flex 2

What are my options for a failed root attempt on my flex 2? I've tried recovery and that doesn't work. Can't find any ROM's. Am I stuck with a bricked device until the ROM's are out?

Lurtz988 said:
What are my options for a failed root attempt on my flex 2? Can't find any ROM's. Am I stuck with a bricked device until the ROM's are out?
Click to expand...
Click to collapse
What do you mean by "I've tried recovery and that doesn't work."? You can't get to recovery? You can't restore?

lge h959 v10c rom(kdz format) works, u can try that rom with lg flash tool. Flash it in downloading mode.

Stank0 said:
What do you mean by "I've tried recovery and that doesn't work."? You can't get to recovery? You can't restore?
Click to expand...
Click to collapse
I tried going to the recovery menu via hardware reset and when I hit "restore factory settings" it did it's thing but still freezes at login screen.

Ive got the same problem with my sons flex 2. He decided to try to root it and now all it does is sit at the boot screen. Is there anything that can be done or should i send it back for repair and play dumb?
Thanks

cjm1979 said:
Ive got the same problem with my sons flex 2. He decided to try to root it and now all it does is sit at the boot screen. Is there anything that can be done or should i send it back for repair and play dumb?
Thanks
Click to expand...
Click to collapse
How far in the rooting process did you make it? Wondering which part could have daused the issue. I have rooted and unrooted probaby 10 times with not the slightest issue.
Sent from my GT-N8013 using XDA Free mobile app

shuka325 said:
How far in the rooting process did you make it? Wondering which part could have daused the issue. I have rooted and unrooted probaby 10 times with not the slightest issue.
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
Not sure as I didn't do it. My son says he thought it had done all of it but then stuck when it came to boot screen. Is there a stock Vodafone UK image anywhere? Had a look and couldn't see any
Cheers
Sent from my HTC One M8 using Tapatalk

cjm1979 said:
Not sure as I didn't do it. My son says he thought it had done all of it but then stuck when it came to boot screen. Is there a stock Vodafone UK image anywhere? Had a look and couldn't see any
Cheers
Sent from my HTC One M8 using Tapatalk
Click to expand...
Click to collapse
Use LG mobile support tool. Launch it and select upgrade recovery. Then type in IMEI and follow instructions.( hold volume up and connect usb cable to boot in to download mode)
http://www.lg.com/uk/support-mobile/lg-H955#software

Lg g flex 2 us995 us cellular stuck at boot
LG G FLEX 2 US995 US CELLULAR STUCK AT BOOT
i tried to unroot my lg g flex 2 us995 with SIMPLY UNROOT.APk. it was successful. but when i reboot my device it got stuck in boot at lg logo. its going to download mode. but not booting up. neither going to recovery,
any help from worthy developers

zydroid1985 said:
lge h959 v10c rom(kdz format) works, u can try that rom with lg flash tool. Flash it in downloading mode.
Click to expand...
Click to collapse
hello bro. i saw your comment oon lg flex 2 brick. i have lg flex 2 us995 cdma. i brick it while unrooting it with SIMPLY UNROoT.APK. i cant find any kdz file for this modal over internet. do u have any idea what should i do. should i flash other modal stock like 955? is that safe for my modal

shuka325 said:
How far in the rooting process did you make it? Wondering which part could have daused the issue. I have rooted and unrooted probaby 10 times with not the slightest issue.
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
how did you unroot your flex 2. I root it successfully but after unrooting it with simply unroot.apk i rebbot it and then was stuck on lg logo. I have us995 modal 10c rom on it. How can i get rid of this issue

muzammil457 said:
how did you unroot your flex 2. I root it successfully but after unrooting it with simply unroot.apk i rebbot it and then was stuck on lg logo. I have us995 modal 10c rom on it. How can i get rid of this issue
Click to expand...
Click to collapse
Within settings of SuperSU, closer to the bottom, there is option to unroot.
Sent from my LGLS996 using XDA Free mobile app

shuka325 said:
Within settings of SuperSU, closer to the bottom, there is option to unroot.
Sent from my LGLS996 using XDA Free mobile app
Click to expand...
Click to collapse
Thts cool bri. But too late for me. I bricked my device. And unluckily no firmware file on internet. Waiting for some body to upload.

shuka325 said:
Within settings of SuperSU, closer to the bottom, there is option to unroot.
Sent from my LGLS996 using XDA Free mobile app
Click to expand...
Click to collapse
Is that safe to flash Ls996 tot on us995 modal. Wont it hard brick my phone???

fail flash
hi
i have a 955 g flex2 and i wrong 969 kdz file flashed stoped at 99% and sadly turned the phone off ,now i cant turn on the phone help

Im pretty new to this site so i appologize if im posting in the wrong area. I got a new h950 flex 2 and i rooted and installed a app. that fixes permissions, fixed the phone turned off and bricked. Coouldnt find a way to unbrick so i flashed a h955 kdz. Which now the phone works. But no cell service....it says im on airplane mode...and sometimes it says cell radio off...so i was wondering if there is something i could change in build prop or flash a radio i just cant seem to find a kdz for att ho50....i see the chinese are the only ones that have a puerto rico edition....no offense to them just cannot pernounce the website. If someone can ease help i dont care which version it is i just want cell serive

Hey, what's your status? Have tou manages to solve the issue?
Sent from my LG-D855 using Tapatalk

anyone have a bricked flex 2 they'd like to donate for testing?
looking for flex 2 devices with messed up bootloader.. either showing up as a 9008 qhsusb bulk device or phone not turning on at all (nothing shows on screen).

i do have one black screen and 9008

Qdloader 9008
I have mine too, i followed some genius and ended up with dead phone, awaiting solution as it was rolled for G3 and other LG devices. :crying:

Erased OS!! And Cant access Download Mode because Kill Switch

Ok I think I really may have messed up big time with this guys so I'm begging for some help.
]So I just recently bought a AT&T LG G3 on ebay in excellent condition everything worked great until I started experimenting. I rooted it using KingRoot but later decided I'd rather use another method of root because I prefer SuperSu to manage my root access...Anyways to make a long story very short. I needed to get into download mode but Kill Switch had already locked me out because I rooted it..I did not know that McAfee would lock my phone when I rooted.. and so as a last ditch effort I attempted to wipe the entire drive and re-flash the OS well to my surprise that did completely erase the OS as expected but not the Kill Switch. So now im stuck at LG Welcome screen and cant do anything.. I'm at the mercy of the web help PLEASE!!! smh

TriLTorch said:
Ok I think I really may have messed up big time with this guys so I'm begging for some help.
]So I just recently bought a AT&T LG G3 on ebay in excellent condition everything worked great until I started experimenting. I rooted it using KingRoot but later decided I'd rather use another method of root because I prefer SuperSu to manage my root access...Anyways to make a long story very short. I needed to get into download mode but Kill Switch had already locked me out because I rooted it..I did not know that McAfee would lock my phone when I rooted.. and so as a last ditch effort I attempted to wipe the entire drive and re-flash the OS well to my surprise that did completely erase the OS as expected but not the Kill Switch. So now im stuck at LG Welcome screen and cant do anything.. I'm at the mercy of the web help PLEASE!!! smh
Click to expand...
Click to collapse
You can't get passed that. There's no way around it. Only way if it's even possible is to pay a phone store that has a box that might can fix it. But other wise chances are slim
Sent from my iPhone using Tapatalk

hyelton said:
You can't get passed that. There's no way around it. Only way if it's even possible is to pay a phone store that has a box that might can fix it. But other wise chances are slim
Click to expand...
Click to collapse
Dang please dont tell me that I honestly just bought this phone a week ago..heh..Ive rooted and flashed multiple phones in my time but have never seen a "kill switch".

TriLTorch said:
Dang please dont tell me that I honestly just bought this phone a week ago..heh..Ive rooted and flashed multiple phones in my time but have never seen a "kill switch".
Click to expand...
Click to collapse
you can try this.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085

Jahanzaibawan said:
you can try this.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085
Click to expand...
Click to collapse
Thank you I will try this!!

TriLTorch said:
Thank you I will try this!!
Click to expand...
Click to collapse
Don't think that will work with the kill switch issue. That is if you loose download mode. But worth a shot.
Sent from my iPhone using Tapatalk

Jahanzaibawan said:
you can try this.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085
Click to expand...
Click to collapse
This method worked after many hours of trying and trying thank you for this ...unfortunately the phone which was unlock is now locked again and says that it is permanently locked to AT&T.. any Ideas?

TriLTorch said:
This method worked after many hours of trying and trying thank you for this ...unfortunately the phone which was unlock is now locked again and says that it is permanently locked to AT&T.. any Ideas?
Click to expand...
Click to collapse
What do you mean says its permanently locked to AT&T? Screen shot? Is it asking for a sim unlock code?
Sent from my iPhone using Tapatalk

hyelton said:
What do you mean says its permanently locked to AT&T? Screen shot? Is it asking for a sim unlock code?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yea the SIM unlock is permanently locked and I havent even had the opportunity to put a unlock code in. After finally getting the Download mode working and getting the OS back on it Dial 2945#*850# to insert unlock code and it says "this phone is permanently locked and can not be unlocked" I haven't even made a wrong attempt at it yet its just already locked.

Jahanzaibawan said:
you can try this.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085
Click to expand...
Click to collapse
This link worked pretty flawlessly just took a few tries shorting the pins out and plugging in the computer simultaneously but once the phone shows as its plugged into a com port and you have your tot file and dll ready for flash read directions very very carefully and this works great thank you so much!

TriLTorch said:
This link worked pretty flawlessly just took a few tries shorting the pins out and plugging in the computer simultaneously but once the phone shows as its plugged into a com port and you have your tot file and dll ready for flash read directions very very carefully and this works great thank you so much!
Click to expand...
Click to collapse
welcome buddy.?

[LG-H918 TMO] [TOTs]

As promised,
here above you have some TOTs just created and only for Development use
This image files are been created in Stock bootloader locked mode, but should be the same as unlocked mode for sure.
V 10d TOTs
Stock FULL TOT -----> LINK
Stock System and boot partitions TOT -----> LINK
Stock only Recovery TOT -----> LINK
Stock only Boot Partitions TOT -----> LINK

Sick! Do these flash correctly though? Have you tested on your device?

Honestly Annoying said:
Sick! Do these flash correctly though? Have you tested on your device?
Click to expand...
Click to collapse
Still not Bro.
Waiting @tungkick to have a way to always go back, but i'm pretty sure if you flash only recovery TOT for example, you don't have any risk of brick nothing

wolfgart said:
Still not Bro.
Waiting @tungkick to have a way to always go back, but i'm pretty sure if you flash only recovery TOT for example, you don't have any risk of brick nothing
Click to expand...
Click to collapse
Alright, I am going to attempt to make a TOT with TWRP. Just need the TWRP file from @jcadduono

Honestly Annoying said:
Alright, I am going to attempt to make a TOT with TWRP. Just need the TWRP file from @jcadduono
Click to expand...
Click to collapse
He already posted it on his website a few pages back. Check it out

arjuna_ said:
He already posted it on his website a few pages back. Check it out
Click to expand...
Click to collapse
Oh damn, I'll check that out! Totally missed that, my bad

Wait. Is there a TWRP for the T-Mobile V20??...

stanleyopar2000 said:
Wait. Is there a TWRP for the T-Mobile V20??...
Click to expand...
Click to collapse
There is a twrp recovery.img, but it's not yet flashable.

What is @tungkick website where I can find all of this stuff? Looking forward to flashing everything in the near future.

stanleyopar2000 said:
Wait. Is there a TWRP for the T-Mobile V20??...
Click to expand...
Click to collapse
Yes, there seems to be one already, but as far as i know it is not flashable yet.
Look on this thread:
http://forum.xda-developers.com/v20...-stock-tot-t3484982/post69308906#post69308906

I have a bricked v20 and I have tried flashing this .tot and the other posted in this forum and I keep getting error messages at 9% on all attempts on two windows machines. Any ideas on what this issue could be? I am using LGUP version 1_14_3. Is this the latest build or the build compatible with the V20? Drivers were latest I could find also using the LG common.dll which I needed for LGUP to recognize the V20. This is my only way out of brick I think. Any suggestions would be greatly appreciated. Thanks

bud951 said:
I have a bricked v20 and I have tried flashing this .tot and the other posted in this forum and I keep getting error messages at 9% on all attempts on two windows machines. Any ideas on what this issue could be? I am using LGUP version 1_14_3. Is this the latest build or the build compatible with the V20? Drivers were latest I could find also using the LG common.dll which I needed for LGUP to recognize the V20. This is my only way out of brick I think. Any suggestions would be greatly appreciated. Thanks
Click to expand...
Click to collapse
mate, as of today, i have read that there is no dll file for the v20. i.e there is no updated dll file to recognise the v20 in lgup.
u might want to wait a bit longer before u can unbrick your phone.

frostmore said:
mate, as of today, i have read that there is no dll file for the v20. i.e there is no updated dll file to recognise the v20 in lgup.
u might want to wait a bit longer before u can unbrick your phone.
Click to expand...
Click to collapse
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.

bud951 said:
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.
Click to expand...
Click to collapse
I don't think the flash tool is meant to be public, so they are probably leaked files.
I have a soft bricked LG V20 and have tried the LGUP DLL for every LG phone model I could find. The most progress I got was with the LG G5 dll and it only went to 10%.

bud951 said:
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.
Click to expand...
Click to collapse
not really sure as i am new to LG.
been reading up on xda relating to flashing and rooting (i came from samdung phones) this baby. i think being patient here is what you can do at the moment.also, not only the dll file is missing, i read twrp is not saving backup properly due to the new security protocols in place android 7.0.
take heart mate,i know it sucks to have a bricked phone.

all im getting is "Unknown Model"

Managed to soft brick my H918 as well, so if anyone working on this needs a tester, I'd love to get my phone back.

Perion said:
Managed to soft brick my H918 as well, so if anyone working on this needs a tester, I'd love to get my phone back.
Click to expand...
Click to collapse
Check here
http://forum.xda-developers.com/v20/development/h918-stock-deodex-debloat-t3499423/page13
Sent from my Pixel XL using Tapatalk

alane708 said:
Check here
http://forum.xda-developers.com/v20/development/h918-stock-deodex-debloat-t3499423/page13
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I appreciate it, wish I'd seen that the day before. I tried to go back to stock recovery to see if that would fix my boot loop issue, so, without access to TWRP, I'm hosed until we have a method to reflash recovery from Fastboot or Update modem connection..

I am screwed as well, I messed my phone up too, and when I turn my phone on it automatically goes the to the upgrade mode screen, I want to through away this damn phone, hehehe.

LG-H959 stuck on logo

Hello,
I have an lg-h959 stuck on logo and i want to flash it....problem is i have never flashed an lg before and also i dont know what region it is....can someone help me out?

andrew21 said:
Hello,
I have an lg-h959 stuck on logo and i want to flash it....problem is i have never flashed an lg before and also i dont know what region it is....can someone help me out?
Click to expand...
Click to collapse
What's the reason it's stuck on the logo? Did you do something like attempt root or anything?
If you haven't done anything to cause it did you try performing a factory reset?
It could be a hardware issue or battery problem if you didn't do anything to cause the stuck on LG logo problem.
Sent from my iPhone using Tapatalk

hyelton said:
What's the reason it's stuck on the logo? Did you do something like attempt root or anything?
If you haven't done anything to cause it did you try performing a factory reset?
It could be a hardware issue or battery problem if you didn't do anything to cause the stuck on LG logo problem.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I didnt root the phone, it just goes on and off, i want to try flashing it with LG Flash Tool 2014...i cant hard reset either since it just doesnt go to factory set mode.....can you provide me with correct firmware pls?

andrew21 said:
I didnt root the phone, it just goes on and off, i want to try flashing it with LG Flash Tool 2014...i cant hard reset either since it just doesnt go to factory set mode.....can you provide me with correct firmware pls?
Click to expand...
Click to collapse
So with the phone off you've tired holding down vol up and power or vol down and power to attempt to factory reset? Your phone doesn't need to boot into the OS to factory reset it...
Also normally this doesn't happen unless it's a hardware issue since you didn't do anything to cause it.
Was the device running MM? If so you need to use LGUP. Lg flashtools 2014 won't work if your running MM 6.0.
Just check out the general section there's a back to stock guide with links to firmwares.
Sent from my iPhone using Tapatalk

Ok so I checked it, can you tell me which stock firmware to download, also my phone reboots and I don't know if it running on mm

Hello, my phone constantly reboots and stuck on logo, how do I know android version of this phone? Is there any tool that can help me do this? I can go to factory set mode and download mode

andrew21 said:
Hello, my phone constantly reboots and stuck on logo, how do I know android version of this phone? Is there any tool that can help me do this?
Click to expand...
Click to collapse
Just use LGUP. And flash your models kdz. There's no specific one just make sure it matches your model.
Sent from my iPhone using Tapatalk

hyelton said:
Just use LGUP. And flash your models kdz. There's no specific one just make sure it matches your model.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So, i downloaded LGUP AND drivers and H95920a_00_0624.kdz file...will that do it? I know the flashing procedure.

andrew21 said:
So, i downloaded LGUP AND drivers and H95920a_00_0624.kdz file...will that do it? I know the flashing procedure.
Click to expand...
Click to collapse
Yes. Just place your phone in download mode.
If your phone still does the same after flashing it's either your battery or a hardware failure.
Sent from my iPhone using Tapatalk

hyelton said:
Yes. Just place your phone in download mode.
If your phone still does the same after flashing it's either your battery or a hardware failure
Ok thanks will try tomorrow and post results
Click to expand...
Click to collapse

Just one more question, can I select refurbish in LGUP and how to select file in this procedure?

andrew21 said:
Just one more question, can I select refurbish in LGUP and how to select file in this procedure?
Click to expand...
Click to collapse
You would choose refurbish
Sent from my iPhone using Tapatalk

Ok will try it out later tomorrow

A couple of us had the same problem. Just buy a new battery and replace it yourself. It fixed the bootloop for all of us.

z.coniglietti said:
A couple of us had the same problem. Just buy a new battery and replace it yourself. It fixed the bootloop for all of us.
Click to expand...
Click to collapse
Ok will do that if software doesnt work

z.coniglietti said:
A couple of us had the same problem. Just buy a new battery and replace it yourself. It fixed the bootloop for all of us.
Click to expand...
Click to collapse
I flashed the phone but same problem...now ill try out new battery and post results tomorrow

Just search the forum and YouTube for lg g flex 2 bootloop and you'll see. I was in the same situation as well and that helped. I replaced it multiple times and I even baked the motherboard in the oven. Just the battery was the issue and thank God nothing worse. And the battery is like 10$ so not too much. Hope you fix it.

z.coniglietti said:
Just search the forum and YouTube for lg g flex 2 bootloop and you'll see. I was in the same situation as well and that helped. I replaced it multiple times and I even baked the motherboard in the oven. Just the battery was the issue and thank God nothing worse. And the battery is like 10$ so not too much. Hope you fix it.
Click to expand...
Click to collapse
Guys problem solved after changing battery...