Related
Hi everyone!
Just a little question, as I'm facing this situation right here:
is there a way to revive a phone that doesn't boot, nor lets me access recovery mode or fastboot or bootloader?
UltimateGoblin said:
Hi everyone!
Just a little question, as I'm facing this situation right here:
is there a way to revive a phone that doesn't boot, nor lets me access recovery mode or fastboot or bootloader?
Click to expand...
Click to collapse
Which phone are you talking about?
I'm talking about the Alcatel V860. It's absolutely an uncommon model, that's the reason why I'm speaking in general.
UltimateGoblin said:
I'm talking about the Alcatel V860. It's absolutely an uncommon model, that's the reason why I'm speaking in general.
Click to expand...
Click to collapse
Please ask specific questions as its related to the phone model. I'm not hopefully about it. You can get it serviced by "bootloader repair" Should be about 40$.
Some of the more common phones can be unbricked on your own.
LS.xD said:
Please ask specific questions as its related to the phone model. I'm not hopefully about it. You can get it serviced by "bootloader repair" Should be about 40$.
Some of the more common phones can be unbricked on your own.
Click to expand...
Click to collapse
I've already posted here, but I received only one answer, so I decided to speak more general just to know if it is theoretically possible to rescue a phone in the situation I described.
Anyway, do you think that there is no way that the pc can communicate with a phone that doesn't even reach the bootloader?
Ok, I'll ask a different question: the phone I'm talking about ended up this bad while flashing an official OTA.
How is that possible?
I thought there was no possible way that an OTA messed with the bootloader, or the recovery... or fastboot! Doesn anyone know what could possibly have gone wrong during the update?
UltimateGoblin said:
Ok, I'll ask a different question: the phone I'm talking about ended up this bad while flashing an official OTA.
How is that possible?
I thought there was no possible way that an OTA messed with the bootloader, or the recovery... or fastboot! Doesn anyone know what could possibly have gone wrong during the update?
Click to expand...
Click to collapse
Actually, it seems like your phone is bricked, there are some methods to unbrick some phones but I don't know if they would work for you, just try to do a Google search how to unbrick a bricked phone, and it might return with some useful stuff, try everything that's possible, because nothing worst can happen over a brick(except it can blast in your hand if you connect a high voltage in place of battery)(lol, it won't happen! )
Hit Thanks if I helped sent from my SM-T211
Already done that, I'm giving up if my pc cannot communicate with the phone.
At this point I'd only like to know how could an OTA corrupt the bootloader.
UltimateGoblin said:
Already done that, I'm giving up if my pc cannot communicate with the phone.
At this point I'd only like to know how could an OTA corrupt the bootloader.
Click to expand...
Click to collapse
Only thing you can do now is, go to store(from where you buy your phone, act dumb and tell them that this won't turn on, they might replace your phone!
Hit Thanks if I helped sent from my SM-T211
Thanks. Anyone else?
UltimateGoblin said:
Thanks. Anyone else?
Click to expand...
Click to collapse
So, what exactly you did?
Hit Thanks if I helped sent from my SM-T211
It wasn't me, it was my cousin, who flashed an OTA which apparently corrupted all the layers of the OS. I believe him, but I find it incredibly difficult to happen, so I wanted to know if that could really happen.
UltimateGoblin said:
It wasn't me, it was my cousin, who flashed an OTA which apparently corrupted all the layers of the OS. I believe him, but I find it incredibly difficult to happen, so I wanted to know if that could really happen.
Click to expand...
Click to collapse
What do you mean by ota corrupting all layers of os?
I never heard of it.
Hit Thanks if I helped sent from my SM-T211
It means that the flashing went bad and now the phone is unusable. I cannot make it communicate with the pc. No access to recovery nor bootloader nor fastboot nor anything.
UltimateGoblin said:
It means that the flashing went bad and now the phone is unusable. I cannot make it communicate with the pc. No access to recovery nor bootloader nor fastboot nor anything.
Click to expand...
Click to collapse
Try smart phone flash tool(on pc), I recently came across a thread in which author said he have a hard bricked xolo phone and it don't boot to anything, but responds to SP Flash tool. Give it a try, if might work.
I don't have it's link, Google it
Hit Thanks if I helped sent from my SM-T211
UltimateGoblin said:
It means that the flashing went bad and now the phone is unusable. I cannot make it communicate with the pc. No access to recovery nor bootloader nor fastboot nor anything.
Click to expand...
Click to collapse
Did that worked?
Sent from my SM-T211 using xda app-developers app
So it seems I've really put myself into a bad spot, here.
I recently rooted my phone (Verizon S3) using towelroot, which seemed to work exceedingly well, so I decided to try to make a NANDroid backup using ClockworkMod. I installed ROM Manager, set that up, and chose the "restart in Clockwork recovery mode option", which didn't work. I soon realized I forgot to unlock my bootloader so, at the recommendation of a few sites, used EZ-Unlock to try to do that. The app reported that it was successful, so I tried restarting my phone in Clockwork recovery mode again. To my utter horror, my phone did not turn on, and has not turned on since.
When I say that it doesn't turn on, I mean that it gives me no audio, vibrational, or visual feedback, almost like there's no battery in the phone. I've pulled the battery and also attempted to do the fix outlined in a video, but to no avail. (I would post the link if the forum allowed me to. The title of the video is "Unbrick hard bricked Verizon Galaxy S3 running 4.3 Jelly Bean")
Feel free to scold me all you like for my irresponsibility and stupidity, it's probably deserved. Any help will be hugely appreciated, though! Thank you so much!
Edit: I guess I should mention that this is my first time doing this sort of thing to an Android device. However, I do like to think I "know my way around", as they say. (although I guess not enough to avoid messing things up!)
Velovix said:
So it seems I've really put myself into a bad spot, here.
I recently rooted my phone (Verizon S3) using towelroot, which seemed to work exceedingly well, so I decided to try to make a NANDroid backup using ClockworkMod. I installed ROM Manager, set that up, and chose the "restart in Clockwork recovery mode option", which didn't work. I soon realized I forgot to unlock my bootloader so, at the recommendation of a few sites, used EZ-Unlock to try to do that. The app reported that it was successful, so I tried restarting my phone in Clockwork recovery mode again. To my utter horror, my phone did not turn on, and has not turned on since.
When I say that it doesn't turn on, I mean that it gives me no audio, vibrational, or visual feedback, almost like there's no battery in the phone. I've pulled the battery and also attempted to do the fix outlined in a video, but to no avail. (I would post the link if the forum allowed me to. The title of the video is "Unbrick hard bricked Verizon Galaxy S3 running 4.3 Jelly Bean")
Feel free to scold me all you like for my irresponsibility and stupidity, it's probably deserved. Any help will be hugely appreciated, though! Thank you so much!
Edit: I guess I should mention that this is my first time doing this sort of thing to an Android device. However, I do like to think I "know my way around", as they say. (although I guess not enough to avoid messing things up!)
Click to expand...
Click to collapse
You need to report your post so it can be moved to the Verizon s3 forums where you can get help for your problem.
Darke5tShad0w said:
You need to report your post so it can be moved to the Verizon s3 forums where you can get help for your problem.
Click to expand...
Click to collapse
Oh, my mistake. I'll do that right away. Thank you!
Velovix said:
Oh, my mistake. I'll do that right away. Thank you!
Click to expand...
Click to collapse
No problems. This is the forum for the International version and we don't have locked bootloaders so you will have more chance in there than you will here.
can you get the phone to go in to download mode? that power+home+vol down
Timothy08 said:
can you get the phone to go in to download mode? that power+home+vol down
Click to expand...
Click to collapse
No, unfortunately, I cannot. I hope I'm not already out of luck.
Velovix said:
No, unfortunately, I cannot. I hope I'm not already out of luck.
Click to expand...
Click to collapse
Was your phone on android 4.3 before you tried to unlock bootloader? If so, that isn't good.
sjpritch25 said:
Was your phone on android 4.3 before you tried to unlock bootloader? If so, that isn't good.
Click to expand...
Click to collapse
Uhh, yes, it was.. Any suggestions?
Velovix said:
Uhh, yes, it was.. Any suggestions?
Click to expand...
Click to collapse
Maybe try looking at the unbrick thread in the q&a?
Velovix said:
Uhh, yes, it was.. Any suggestions?
Click to expand...
Click to collapse
Do what the guy above suggested. Oh just so you know when you are on 4.3 you can not unlock your bootloader. Only root. Also once on 4.3 you can not downgrade to any earlier firmware versions. You can thank Verizon for that.
Sent from my SCH-I535 using Tapatalk
YevOmega said:
Maybe try looking at the unbrick thread in the q&a?
Click to expand...
Click to collapse
If you're referring to "[GUIDE] Debrick your bricked SCH-I535! [BOOTLOADER/HARDBRICK]", I have tried that a few times. I guess I could give it a few more shots if that's my only option.
Sandman-007 said:
Do what the guy above suggested. Oh just so you know when you are on 4.3 you can not unlock your bootloader. Only root. Also once on 4.3 you can not downgrade to any earlier firmware versions. You can thank Verizon for that.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
That's awful. I guess I was looking at a guide for a non-Verzion phone. Thank you for the information, though.
So, if I understand my situation, I guess the question now is: How can I lock my bootloader back up while it's hardbricked, correct?
Velovix said:
So, if I understand my situation, I guess the question now is: How can I lock my bootloader back up while it's hardbricked, correct?
Click to expand...
Click to collapse
No. Your only focus is on getting the phone to boot back up. The only method that we have to do so is the bootloader/hardbrick thread by SpryroDazee posted at the top of our Q/A section.
SlimSnoopOS said:
No. Your only focus is on getting the phone to boot back up. The only method that we have to do so is the bootloader/hardbrick thread by SpryroDazee posted at the top of our Q/A section.
Click to expand...
Click to collapse
Alright, I'll see what I can do. Thanks for the help!
Velovix said:
Alright, I'll see what I can do. Thanks for the help!
Click to expand...
Click to collapse
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-s3-bootloader-downgrade-service/
This might help. Try mobile tech videos. they can Jtag and downgrade for you.
So pretty new to this form I'm from the United States I have a LG flex 2 h950 I rooted the other day and then I installed a application that fixed permissions... once the permissions were fixed the phone turned off and just started boot looping afterwards. I couldn't find software for my phone so I tried flashing H955 software...bad idea... the phone works but seems only the cellular service doesn't work...if there's a way for me to enable the radio somehow or flash different radio please let me know because it's really frustrating I know I'm dumb that i did it to begin with but i can at least use the phone besides cellular service .I didn't know if somebody has a spare H 950 software in there pocket or if there's another way to go around it I can't get anything from LG and I can't get anything from AT&T so pretty much I have a phone that I can't call with or text with also I noticed whenever I go to the hidden menu and I go to phone info...it says this application does not work with this device any help would be appreciated.
On my 3rd flex 2 at&t. I called and made something up and they sent a replacement. They never check. They just refurbish the device as long as it has no external damage.
Sent from my LG-H950 using Tapatalk
Really? I was thinking that. But its not my plan. Its my girlfriends i didnt wanna get her disconnected. Because it is also rooted. I heard they can do that. I didnt kno if i could modify something in build prop or flash something. It also sucks because i like this phone and there's no recovery which got me in the situation to begin with. Thanks for the advice though. Im still debating if i should do that or if anyone has any other ideas? Thanks
did you modify the system folder? i can help you with that
- didnt' read your story.
I don't know if i can help you
there are no stock images. but if there is pieces from the rom you need. I can send them to you
The system folder? What would i have to modify? I had a couple ideas but they didnt really work lol...long story short cant find att stock firmware h950...rooted...bricked...flashed h955 firmware hoping that would work but now i cant get cell service. Says radio is disabled but i cannot find a way to enable
soosoolhastam said:
did you modify the system folder? i can help you with that
- didnt' read your story.
I don't know if i can help you
there are no stock images. but if there is pieces from the rom you need. I can send them to you
Click to expand...
Click to collapse
Totally unrelated.. Is h950 att?? In android dev section i started a thread... Someones lookin for system folder so he can work on an unlock... Would you mind sharing it?
Yes H950 is att...please let me kno. Yes a little confused by last replies. Thanks
Try this .. it should work to restore
hyperndrush1989 said:
Yes H950 is att...please let me kno. Yes a little confused by last replies. Thanks
Click to expand...
Click to collapse
ahh bricked LG's. they are really hard to restore.. i remember when i bricked my lg g pro f240k and it took me forever to restore but eventually i did.
it was soo easy.. much easier than i thought.
okay, try this buddy
http://lg-support-tool.en.lo4d.com/ << download and install this. as well as lg drivers.
put your phone into download mode.. and then leave it there.
connect your phone to your pc, and then click find software or something like that.
after youve done that...
it will find the appropriate software and flash it automatically, although you will lose your root, and you might end in android 5.1.1
however i am not too sure...
btw leave a thanks and tell me how you got on!
Cool thanks much appreciated...i will let you kno tomorrow. While we are on the subject dose anyone know a custom recovery method for the flex 2 H950? or mabey a recovery from a differnent model that MAY work? So this dose not happen again. :good: many thanks.
i wouldn't mind buddy. give a few hours.
Please keep us posted, cuz I also bricked my H950. I manage to get SU but for some reason I could not install Titanium, so I proceed to root it again via traditional way. Not the phone just stuck at&t logo. Any help is appreciated!! Why can't we get TOT for this phone??
phissith said:
Please keep us posted, cuz I also bricked my H950. I manage to get SU but for some reason I could not install Titanium, so I proceed to root it again via traditional way. Not the phone just stuck at&t logo. Any help is appreciated!! Why can't we get TOT for this phone??
Click to expand...
Click to collapse
this might help you. it shows how to do a factory reset without the rom loading.
http://support.sprint.com/support/t...cenario_542_53904_771_en_396-dvc8760002prd#!/
I just bought a g flex 2 h950 for 299 and I was looking for restore option like older lg devices, but we haven't any tot/kdz file for att version ... Maybe an email to LG asking for it haha
Sent from my LG-D800 using Tapatalk
Sj12345 said:
I just bought a g flex 2 h950 for 299 and I was looking for restore option like older lg devices, but we haven't any tot/kdz file for att version ... Maybe an email to LG asking for it haha
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
good luck with that
So I read other threads with similar issues but nothings seemed to work.
Basically my LG G3 (AT&T) started acting odd one day. Resetting every 3-5 minutes, overheating (more than usual), wouldn't connect to Wi-Fi. Eventually I reset it and the problems got worse. I downloaded a boot logger that can't figure out why, there's no physical damage (EDIT: when this first started, I noticed that the little pink water damage sticker on the battery was, well pink, however I never got it wet and could've been pink before but I don't know), I factory reset it again and nothing, swapped the battery and everything. I could've done more but it is still under warranty so I kinda gave up and decided to exchange it.
The new one is on the way and comes tomorrow or Wednesday however now my G3 won't even turn on, or rather it stays locked on the boot screen (the LG logo specifically) it won't go past that. I tried to hard reset it with the power button and it gets to the screen with the android logo with its chest open and just resets again.
I'm not trying to fix it anymore I just want advice on wiping it basically as I can't even wipe it through my computer. With my last phone what I did before selling it, and what I wanted to do again, is encrypt it, then factory reset to just be extra safe and I wanna know if there's anyway I can do this basically with the phone like this, or if I can get it to a state where I can do that again. I'm not all too familiar with android this low level so I want to know if I can basically "hard" wipe it because I can't even connect it to my computer (it keeps resetting).
Also one time on a boot it said the kernel crashed, don't know how relevant that is as it only happened once out of at least 1,000 times by this point.
Any help would be appreciated, super frustrated right now.
Thank you!
dan1229 said:
So I read other threads with similar issues but nothings seemed to work.
Basically my LG G3 (AT&T) started acting odd one day. Resetting every 3-5 minutes, overheating (more than usual), wouldn't connect to Wi-Fi. Eventually I reset it and the problems got worse. I downloaded a boot logger that can't figure out why, there's no physical damage (EDIT: when this first started, I noticed that the little pink water damage sticker on the battery was, well pink, however I never got it wet and could've been pink before but I don't know), I factory reset it again and nothing, swapped the battery and everything. I could've done more but it is still under warranty so I kinda gave up and decided to exchange it.
The new one is on the way and comes tomorrow or Wednesday however now my G3 won't even turn on, or rather it stays locked on the boot screen (the LG logo specifically) it won't go past that. I tried to hard reset it with the power button and it gets to the screen with the android logo with its chest open and just resets again.
I'm not trying to fix it anymore I just want advice on wiping it basically as I can't even wipe it through my computer. With my last phone what I did before selling it, and what I wanted to do again, is encrypt it, then factory reset to just be extra safe and I wanna know if there's anyway I can do this basically with the phone like this, or if I can get it to a state where I can do that again. I'm not all too familiar with android this low level so I want to know if I can basically "hard" wipe it because I can't even connect it to my computer (it keeps resetting).
Also one time on a boot it said the kernel crashed, don't know how relevant that is as it only happened once out of at least 1,000 times by this point.
Any help would be appreciated, super frustrated right now.
Thank you!
Click to expand...
Click to collapse
Just follow my G3 back to stock guide and use the tot method.
Sent from my iPhone using Tapatalk
If the guide don't work. Try this. every guide did not work for me. Look at post 5.
http://forums.androidcentral.com/ge...ricked-lg-g2-stuck-twrp-no-download-mode.html
Sent from my LG-D850 using XDA Free mobile app
hyelton said:
Just follow my G3 back to stock guide and use the tot method.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thank you sososo much, I'm gonna give it a shot later tonight.
hyelton said:
Just follow my G3 back to stock guide and use the tot method.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So I'm going through the tot method, however when I plug the phone in I get an error that "Windows malfunctioned the last time the device was plugged in" I plugged it in last night to see if I could do anything and it kept resetting. But in device manager it just shows up as an unknown USB device and there is now no ports section.
dan1229 said:
So I'm going through the tot method, however when I plug the phone in I get an error that "Windows malfunctioned the last time the device was plugged in" I plugged it in last night to see if I could do anything and it kept resetting. But in device manager it just shows up as an unknown USB device and there is now no ports section.
Click to expand...
Click to collapse
What's your OS? If windows 8/10 you'll need to unhide. But if your getting a windows malfunctioned the last time error that would be your computer problem.
Sent from my iPhone using Tapatalk
hyelton said:
What's your OS? If windows 8/10 you'll need to unhide. But if your getting a windows malfunctioned the last time error that would be your computer problem.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Windows 10. It seems like it can't recognize the device, it says under USB controllers: " Unknown USB Device (Device Descriptor Request Failed)"
dan1229 said:
Windows 10. It seems like it can't recognize the device, it says under USB controllers: " Unknown USB Device (Device Descriptor Request Failed)"
Click to expand...
Click to collapse
Yeah you would need to try another computer.
Sent from my iPhone using Tapatalk
hyelton said:
Yeah you would need to try another computer.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I just tried it on another computer, exact same error. It says that there could be something wrong with the device.
dan1229 said:
I just tried it on another computer, exact same error. It says that there could be something wrong with the device.
Click to expand...
Click to collapse
Still windows 10? I've never even seen that error before. Try installing drivers from LGs site?
Sent from my iPhone using Tapatalk
hyelton said:
Still windows 10? I've never even seen that error before. Try installing drivers from LGs site?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Do you know where I could find the driver files? Not the executable, I'm gonna try to "force" update the driver cause it just can't recognize the device but I need the drivers and can't find them.
And yea still Windows 10.
dan1229 said:
Do you know where I could find the driver files? Not the executable, I'm gonna try to "force" update the driver cause it just can't recognize the device but I need the drivers and can't find them.
And yea still Windows 10.
Click to expand...
Click to collapse
Just go to LGs website. The executable should work fine. Are you not trying the ones in the Op? You might want to use a different OS. Not that I'm blaming 10 but for a lot of reasons I had to downgrade.
Sent from my iPhone using Tapatalk
hyelton said:
Just go to LGs website. The executable should work fine. Are you not trying the ones in the Op? You might want to use a different OS. Not that I'm blaming 10 but for a lot of reasons I had to downgrade.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I'm using the ones on your guide, they're on oceanhost
dan1229 said:
I'm using the ones on your guide, they're on oceanhost
Click to expand...
Click to collapse
Okay try the ones from LGs site and see what happens.
Sent from my iPhone using Tapatalk
hyelton said:
Okay try the ones from LGs site and see what happens.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I think I figured it out, only issue (and this is the dumbest yet) is I can't find the .tot file? I downloaded the D850 stock image zip and it's not in there as far as i can tell.
dan1229 said:
I think I figured it out, only issue (and this is the dumbest yet) is I can't find the .tot file? I downloaded the D850 stock image zip and it's not in there as far as i can tell.
Click to expand...
Click to collapse
You extract the zip file... All TOT's are placed in zip files due to size to help people who download it.
hyelton said:
You extract the zip file... All TOT's are placed in zip files due to size to help people who download it.
Click to expand...
Click to collapse
I downloaded the wrong zip my bad XD. Also this doesn't void the warranty does it?
dan1229 said:
I downloaded the wrong zip my bad XD. Also this doesn't void the warranty does it?
Click to expand...
Click to collapse
Wait. What are you trying to do? Why are you needing to flash it if you haven't already voided your warranty? Rooting/Custom rom "voids warranty" in itself.
Flash a tot or kdz puts the phone 100% complete back to stock as you bought it.
hyelton said:
Wait. What are you trying to do? Why are you needing to flash it if you haven't already voided your warranty? Rooting/Custom rom "voids warranty" in itself.
Flash a tot or kdz puts the phone 100% complete back to stock as you bought it.
Click to expand...
Click to collapse
I have the warranty replacement device coming, I just wanted to totally wipe this device but I can't even get it to boot properly.
dan1229 said:
I have the warranty replacement device coming, I just wanted to totally wipe this device but I can't even get it to boot properly.
Click to expand...
Click to collapse
Why won't it boot properly? Also keep in mind this is the only method of going back stock. Also the method only requires you to be in download mode.
Sent from my iPhone using Tapatalk
Hello guys,
I need your assistance with this issue. I got this Boost Mobile LG LS770/Stylo phone from eBay and when I wiped/restored it to clean everything from the other person, the phone still wants me to enter the information from the previous person before I can use it. Of course that is not an option. I tried.
Also, since I am unable to get to the Android OS, I cannot put it in debug mode either. So I tried a few things to no avail. This is what I have done so far:
Put the phone in ADB mode via recovery - Done, but I am unable to sideload anything. I get this error.. "* cannot read 'sideload' *"
Put the phone in download mode "Fireware Update" - Done, and I can see my port as COM3, but when I run the next step, I get a message that says... "Hello, my name is LAF....." and nothing happens.
I tried using the LG one click root tool, but that requires the phone to be in USB debug mode and like I said before, I am unable to even get to the welcome screen in android. I can't get past wifi setup in reality, I can't even skip it.
I have been at this all day today. Can you please help me out? I really appreciate any help you can provide.
Thanks
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
revulv said:
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
Click to expand...
Click to collapse
I have OTG cable... Can you help me out??
revulv said:
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
Click to expand...
Click to collapse
Thank you for your response. I have one. Please go ahead with the steps.
revulv said:
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
Click to expand...
Click to collapse
Also, I forgot to respond to your question. I did contact the eBay guy or lady that sold it to me, but since I'm the one that did the wipe, they are not taking responsibility and I get it. I just would like to be able to use the phone and not waste the money I spent on it. I really appreciate any help you or others can provide.
Have OTG cable & flashdrive
revulv said:
You need a USB-OTG cable and some files. If you have a USB-OTG i'll reply with what you'll need to do. Also, have you contacted the eBay member letting them no they FRP screwed you and you basically own a brick now?
Click to expand...
Click to collapse
I am stuck in the same boat, bought what appears to be a brick. Would be most grateful if I could get the files/procedure you mentioned as well.
Sorry guys!
https://www.youtube.com/watch?v=xNSBbpVOmb4
Thank you for the suggestion , but this method does not work. I have already tried this and after the tool went through all the steps, it still asks for the previous account. I have found on some other forums that LG patched this flaw a few months ago and it is no longer possible to bypass FRP Factory Reset Protection. I guess I have a rock until someone can figure out how to bypass this "Feature", which in my opinion should be illegal because it forces people to buy devices from carriers only and you can no longer sell your phone online to anyone, as you cannot give them the account.
webmanny said:
but this method does not work..
Click to expand...
Click to collapse
It didn't work for me either... the last security patch disabled user from the settings menu. I did find a way after many hours of work.
Basically once I got to settings I clicked unknown sources and then enabled USB debugging and oem unlock. After that I flashed twrp and then a rooted system image. After that I used http://androiding.how/bypass-google-account-verification-on-lg-g4-g3-and-others and it worked
Sent from my HTC One M9 using XDA-Developers mobile app
bigp951 said:
Basically once I got to settings I clicked unknown sources and then enabled USB debugging and oem unlock. After that I flashed twrp and then a rooted system image. After that I used http://androiding.how/bypass-google-account-verification-on-lg-g4-g3-and-others and it worked
Click to expand...
Click to collapse
How did you get to settings? I am only able to get to the accessibility to turn on the voice stuff.
webmanny said:
How did you get to settings? I am only able to get to the accessibility to turn on the voice stuff.
Click to expand...
Click to collapse
I honestly don't remember. I'll try to figure it out and get back to you. I think it was through the keyboard. I returned the phone already so I do t have it on front of me.
Look for anything with terms of service. Once you're on the internet you can download the settings app that everyone uses on the internet.
Sent from my HTC One M9 using XDA-Developers mobile app
Web trust me i went crazy with this for 3 days. My friend gave me his Stylo from work to unlock and i had this same issue. Flashed back to 5.1.1e,i,j, using kdz files and all the exploits that these guys are using have been shut down. If your on MM forget it. The only thing that worked for me was that tool i linked in the other thread. I hope your wrong on the virus part, ill check my laptop, but your the first person to mention that. Either way i flashed back to 5.1.1 from MM, used the tool, rebooted and it worked i signed in with his gmail.
sshafranko said:
Web trust me i went crazy with this for 3 days. My friend gave me his Stylo from work to unlock and i had this same issue. Flashed back to 5.1.1e,i,j, using kdz files and all the exploits that these guys are using have been shut down. If your on MM forget it. The only thing that worked for me was that tool i linked in the other thread. I hope your wrong on the virus part, ill check my laptop, but your the first person to mention that. Either way i flashed back to 5.1.1 from MM, used the tool, rebooted and it worked i signed in with his gmail.
Click to expand...
Click to collapse
I understand and I apologize if I sounded like I was shutting your advise down. That was not my intention. I was just stating what my virus tools detected and my experience. Regardless, I decided to ignore the virus warning and let the tool run and do what the steps on the word document stated. It went through all the steps without issues and I got the same matching screen as in the tutorial document. However, after I reboot, I still get the same screen that reads, login with a google account previously associated with this device.
Now, the one piece I'm not sure I understand from your message above is the part about flashing to 5.1.1 from MM using kdz files. How can you flash the phone when you cannot get into the settings to enable usb debug mode? I have tried everything. I even downloaded a rom file image that I placed on an Micro SD card and tried running it from recovery to no avail.
Maybe you are correct and I am just missing a step. Would you mind expanding on the flashing 5.1.1 from MM part? Maybe what steps and files you had to use?
Also, I'm not sure I understand this portion of your message. You signed in with who's gmail?
sshafranko said:
i signed in with his gmail.
Click to expand...
Click to collapse
Thank you in advance for your assistance.
is there a software older than 5.1.1 that can be flashed to the device?
You can use touch assistant to get in to settings and then disable all google aps, works for me on lg stylo 6.0, PaulieP he is the person that found this method