Database Info

Rooting Micromax Funbook easiest way!!!!

This is the method to root Micromax Funbook & install CWM recovery.
1) Download the attachment funbook.rar
2) Extract it , it contains CWM recovery & CWM-SuperSU.zip two .rar files
3) Extract CWM recovery to desktop & connect your funbook via usb
4) If the device is not detected then install the ADB driver in the attachment
5) open CWM recovery run Recovery-Install.bat
it has 3 option select 1 to install CWM recovery
select 2 to reboot into recovery
select 3 to quit.
6) then move CWM-SuperSU.zip to internal sd of funbook
7) boot into CWM recovery by pressing menu button & power button simultaneously.
8) select install zip from internal sd card & select the CWM-SuperSU.zip & press power button, select yes to continue.
now you are Rooted
Before installing any custom rom perform a NANDROID backup.
This method is successfully tested by me however use this at your own risk!

How exactly is CWM recovery supposed to be installed on the tablet?

just run the Recovery-Install.bat with micromax funbook connected & ADB driver installed on your computer, it will autometically install CWM recovery on your funbook.

Funbook is Pre-Rooted. No Need to root it again.

Thank You
Thank You..
I Love you...

not working
Its say system remount failed, could not copy recovery image
Please help me I want to install custom rom ,
I am using micromax funbook

Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.

pls help
when i run recovery-install.bat
permission denied can somone pls help

I am Getting The following error
remount failed: Operation not permitted
failed to copy 'recovery.img' to '/data//recovery.img': Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied

Problem with installation of CWM on Funbook
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.

help me
dushmanta.bgh said:
Make sure ADB driver for ur funbook installed on ur computer, otherwise install ADB and try again, This method is tested by me successfully working.Don't forget to hit Thanks Button it won't cost u any thing.
Click to expand...
Click to collapse
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it

JetMOD 5.0.1 stuck on Funbook logo, u may tru FunSeries or CyanBook for micromax funbook.Hit Thanks button

For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
INSTALLING CUSTOM RECOVERY
1. Download CWM Recovery 5 ICS.zip
2. Extract it.
These are the requirements fo Flash CWM...
- tablet must be running Android ICS version (4.0.x)
- tablet must have Superuser installed with SU binary loaded
- tablet must have Debugging enabled (ADB drivers included)
Your Funbook is Pre-Rooted, so we'll just proceed with installing Superuser App from Market
3. Go to Play Store and download Superuser.
4. Go to Superuser App > Settings > Su Binary > Install the Binary
5. Reboot.
Now we'll enable USB Debugging
6. Go to Settings > Developer Options > Turn On USB Debugging.
Now we'll increase the screen timeout to prevent screen from getting turned off in the middle of these procedures
7. Go to Settings > Display > Select Never at Sleep.
8. So now connect the USB Cable to your PC and Funbook and you should see USB Debugging Connected notification.
At this point, if this is your first time, you may see Windows trying to find Drivers which will fail ofcourse. Go to Device Management [Press Windows Key + R > Type devmgmt.msc] > Right Click on Unknown Devices > Update Driver Software > Browse My Computer for Driver Software > Both 64bit [Drivers-AllwinnerA10-64bits] and 32bit [Drivers-AllwinnerA10-32bits] Drivers are provided there within a folder named ADB_Drivers under the Recovery Package, so just browse them according to your OS Specification. A screen may appear up saying "The Publisher of this Driver could not be verified", just ignore that and "Continue Anyway".
9. DO NOT TURN ON USB STORAGE. LEAVE IT AS IT IS.
Time to install CWM. There are two methods. One is easy, by running a script and another is using ADB by typing commands. You'll get an _Instructions.txt there which lists both the methods in case you want to try out the 2nd method. Here I'll only cover the easy one i.e. using Script.
10. Run recovery-install.bat [Windows] / recovery-install.sh [Linux] and press any key and just wait and watch the show
11. Within few mins recovery will be installed.
To reboot in Recovery Mode -> Press Options Key and by keeping it pressed, Press Power Key. Release Power Key and then Release Options Key.
12. Reboot.
Code:
=======================================================
| How to control ClockworkMod Recovery 5 |
| |
| VOL+: up |
| VOL-: down |
| POWER: select |
| BACK: back |
=======================================================
Credit goes to tkin
HAVING PROBLEM WHILE INSTALLING CWM?? GETTING PERMISSION DENIED ERROR??
Ok, for those who cannot install CWM from the normal steps(most probably new funbook users having Base 1.2 and ICS 4.0.3) follow these steps.
1. Install Superuser from playstore, update binary, you'll notice it will fail one part(red text), re do the update 2,3 times staright away until all the text become green, no need to reboot phone, but you might want to.
2. Install Android terminal from playstore, in terminal put su and press enter, if you get a warning allow it, if # comes you have root access. If not, re do step one. Don't continue till you get this step correct.
3. Download ES File manager from playstore, go to settings, allow all root access related options and also tick go upto root option.
4. Now start ES file manager, go to root, long press the dev folder, set properties, check all boxes, click ok. Do the same for the data folder, now open the dev folder, and repeat the steps for the block folder, and inside the block folder do the steaps for nandg file.
5. Allow USB debugging from dev options, connect the cable, install drvers.
6. Run the ICS recovery script, wait for it to finish, if it fails then you need to check and set permission again, if all goes well you have successfully installed CWM.
Warning: When setting permissions in ES File Manager make sure the USB cable is not attached, if so it might cause a hard crash and brick the device.
I had used this method to flash CWM on mine and on my friends device, both Base 1.2 and ICS 4.0.3(made in may 2012, the rom build no is: 97F1-D1-H2-H01-MMX.20120512) hence I think funbooks made after may 2012 must use this method, otherwise the script will fails due to permission denial.
Click to expand...
Click to collapse
Worked like a charm for me after setting permissions... Good luck..

Guys try the new Rom
http://forum.xda-developers.com/showthread.php?p=28353648
Sent from my HTC Desire S using xda app-developers app

sudhirrawal20 said:
sir i want to add custome rom jetmod 5.0.1 in my micromax funbook but after installing it process says sucess and then it stucks on FUNBOOK LOGO so, pls tell me how could i solve it
Click to expand...
Click to collapse
If you want Custom to Jetmod you have to flash yuor ROM into ployer Momo9 Based ROM...
Please use search tool forum before asking question like this.

sukhjit321 said:
For all having problems in installing I found this on thinkk digit forums... Maybe this will help you:
Worked like a charm for me after setting permissions... Good luck..
Click to expand...
Click to collapse
dude 'm suck wit a problem!!
I can't change permission of nandg. file and the file name on my funbook is '2012nandg'
I time root browser es explorer
help!! and es explorer gives me on root access to change permission

how to root?
Micromax Funbook ICS 4.0.3 how to root it?
guys i had lots of troubles in installing custom recovery so i tried sparky root but that crappy app can only unroot.
after that i cant update su binary.so used superoneclick it can only root 2.2 and 2.3 now am stuck with rooting.
please guide me to root funbook

neo.abyss said:
I was also trying to install CWM recovery on my funbook. I have already installed SUPERUSER app and updated SU binary.
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied
Kindly help in this case.
Click to expand...
Click to collapse
Try this:_
Right click on 'recovery-install.bat' and run as administrator.....

Unable to install recovey on funbook
Is there anybody to help, i am getting the same error while trying to install recovery on my funbook....
I am getting below error while running recovery-install:-
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘recovery.img’ to ‘/data//recovery.img’: Permission denied
/system/bin/sh: cannot create /dev/block/nandg: Permission denied to install a custom rom...

this is the easiest way to root
1)download this super user by chainsDD on you funbook
2)open it and update you binary from it and you r done
installing cwm is easy use this guide

[ROOT / unROOT] Spice Stellar Mi-1010 Tablet Pad [USB adb Driver]

**************************
MAY 2013 update [root & unROOT]
**************************
Spice mi-1010 is pre-rooted by company. Check by going to android settings -> about device -> kernel version
BUT the su binary is so modified tat u WONT get root access as device user but u WILL get root access as adb user. So all am gonna do here is install the latest unrestricted su binary thru adb
REMEMBER => do NOT mess with the busybox, its custom modded by spice (its better if u donno wat busybox is &/or how to mess/update it)
*************************
all other rooting methods for mi-1010 (wherever u've found it) r simply WRONG!!! because of wat i've just explained. if u have done them, i suggest u to reinstall the stock firmware again. its available in another post of mine, linked below
*************************
Driver Installation...
1. Install attached PDAnet
2. choose BRAND as OTHER
3. MUST exit the pdanet app that'll auto start (system tray) after installation
*************************
Enable on yr device...
1. setting > developer option > USB debugging
2. setting > developer option > allow mock location
3. setting > security > unknown sources
*************************
start DEVICE MANAGER on PC, keep an eye & plugin mi-1010... a new device sud pop up in device manager. it sud NOT have any EXCLAMATION or QUESTION mark beside
*************************
Download attached [size=+1]sadhu.mi1010.may.2013.rar[/size]
*************************
to root => run [size=+1]ROOT.sadhu.mi1010.may.2013.bat[/size]
to unROOT => run [size=+1]unROOT.sadhu.mi1010.may.2013.bat[/size]
*************************
After ROOTing...
1. download latest "superSU" from play store
2. in superSU settings, install it to SYSTEM
3. dont touch the busybox
*************************
hit THANKS if u appreciate
*************************

sadhu_s60 said:
**************************
MAY 2013 update [root & unROOT]
**************************
Spice mi-1010 is pre-rooted by company. Check by going to android settings -> about device -> kernel version
BUT the su binary is so modified tat u WONT get root access as device user but u WILL get root access as adb user. So all am gonna do here is install the latest unrestricted su binary thru adb
REMEMBER => do NOT mess with the busybox, its custom modded by spice (its better if u donno wat busybox is &/or how to mess/update it)
*************************
all other rooting methods for mi-1010 (wherever u've found it) r simply WRONG!!! because of wat i've just explained. if u have done them, i suggest u to reinstall the stock firmware again. its available in another post of mine, linked below
*************************
Driver Installation...
1. Install attached PDAnet
2. choose BRAND as OTHER
3. MUST exit the pdanet app that'll auto start (system tray) after installation
*************************
Enable on yr device...
1. setting > developer option > USB debugging
2. setting > developer option > allow mock location
3. setting > security > unknown sources
*************************
start DEVICE MANAGER on PC, keep an eye & plugin mi-1010... a new device sud pop up in device manager. it sud NOT have any EXCLAMATION or QUESTION mark beside
*************************
Download attached [size=+1]sadhu.mi1010.may.2013.rar[/size]
*************************
to root => run [size=+1]ROOT.sadhu.mi1010.may.2013.bat[/size]
to unROOT => run [size=+1]unROOT.sadhu.mi1010.may.2013.bat[/size]
*************************
After ROOTing...
1. download latest "superSU" from play store
2. in superSU settings, install it to SYSTEM
3. dont touch the busybox
*************************
hit THANKS if u appreciate
*************************
Click to expand...
Click to collapse
any rom for this tab like cm 10

japjit100 said:
any rom for this tab like cm 10
Click to expand...
Click to collapse
donno bro, am out of country with limited internet

Waiting for Rom development.

adb always shows DEVICE NOT FOUND
I have Spice Mi 1010.. I m trying to root this...
I already installed RockChip Drivers... but, still it says "DEVICE NOT FOUND"
Plz help me on this

U need to forget rockchip & any/everything else.... just do ONLY & EXACTLY as described
**rockchip driver is for FIRMWARE purpose ONLY

sadhu_s60 said:
U need to forget rockchip & any/everything else.... just do ONLY & EXACTLY as described
**rockchip driver is for FIRMWARE purpose ONLY
Click to expand...
Click to collapse
Thanks for the Quick Response....
I m using Windows 7 64bit... ADB from your zip file didnt work for me, it was showing Side-by-side Error(something like that).. Then, I used new AD B driver and then adb command didnt give any ERROR.
The main issue I had is, We need to ADD ADB_USB.INI file. 'coz, google says, all devices cannot be detected from ADB, in that case, we need to find our device Vendor ID and then put it in ini file. Then my device got detected. Now, Everything is fine...
- My Next attempt is to get CWM installed on this device. Then will make a custom ROM. I read that, RK3066 Retina display modules work on any RK3066 device.. I ll give a try.. If you already installed CWM on this device, plz do let me know.
If you dont mind, can u add a Trouble shooting section in First post and add below data:
1. Unzip and Copy Attached file in C:\users\Username\.android folder. So, file is C:\user\Username\.android\adb_usb.ini
2. Then on ADB, run these commands, adb kill-server and adb devices. Now, you device should be displayed.
In case, if you still cant find it, then search for LUSB.EXE file from google and run it, it displays your device Vendor and Product ID's. Then, open attached file(adb_usb.ini)(use Notepad++ or Textpad editor) and add your device Vendor ID in the last line just like I did

Bro, don't get too excited with spice mi1010... it'll die on U someway or the other, before U develop any FW for it... its a piece of junk
Then when it dies & U give it to service, u'll get a completely bashed up piece of junk which U won't feel like using anymore... then u'll tell them to give U a better condition piece & they'll give U a even more bashed up piece & the circle will go on 1month for each transaction... & finally u'll come home & either use sell_the_****_till_it_turns_on.ini or >adb hammer

I wrote all this during the 1st 1 month tat the device worked... after that 2months of service & then sold off
What I wrote WORKED!!! But now obviously there's better tricks
& I don't have the device or any other android to test anymore... I've moved on to windows ecosystem with Asus vivotab smart LTE

sadhu_s60 said:
I wrote all this during the 1st 1 month tat the device worked... after that 2months of service & then sold off
What I wrote WORKED!!! But now obviously there's better tricks
& I don't have the device or any other android to test anymore... I've moved on to windows ecosystem with Asus vivotab smart LTE
Click to expand...
Click to collapse
Ohh.. Thanks for you suggestion.. Anyway, its working good as of now, I will try to use it with care.
I m very glad to say that CWM worked on my device and I already extracted SYSTEM folder from Stock image. Hope I can create a custom Rom now...

Thanks for this mate.. was helpful to root my 2 yrs old device

[Q] lenovo a560 root methods??

Hello to everyone.
I'm using Lenovo A560 and want to root it to delete all those junk, built-in apps so that my RAM usage will decrease. I have tried many times using various root software (rootgenius, kingo, framaroot) yet didn't successful to root my a560. I have already installed usb driver for lenovo a560. Anyone can help me? I already have tried to root my phone like in the http://forum.xda-developers.com/showthread.php?t=2769260 thread but still the same problem occurred.
When i used rootgenius, my phone just reboot and reboot until 86% and the process failed. same on the kingo (except my phone did not reboot like before, it just failed after a reboot). In framaroot, the #error 6 message pop out.
Anyone can help me how to root my phone please? My phone system:
Android 4.3
Baseband ver : A560_A_0001_140330
Kernel Ver: 3.4.0-g80ec9c8-01182-gb30d6a7-dirty [email protected] #6
Build Num : A560_S010_143330
#just put every details for that i'm a newbie in these things. Any help would be very appreciated. (manual root not recommended, but still can try~)
Thanks!

Same problem here. Anyone can help please? Android 4.3 running on Lenovo A560.

problem solved.
I finally managed to root my a560 by installing the driver from the phone into the PC . Then I used iRoot to root my phone. It works! I followed the methods provided by a Russian blog (cannot post outside link because I'm a new user,credit to the blog)
Here's the methods (translated, contains grammar errors).
Remember, you're doing it at your own risk. The site administrator can not be held liable for the actions that you make.
1. Download and install the program on your computer VRoot
2. Disable antivirus (as needed).
3. Run the program, connect the device to your computer (if it is not defined, then try to install the drivers from the official site of your device). On the phone should be included: Debugging via USB, install from unknown sources in the USB connection must be uncheck MTP and Camera (RTR).
4. Once the device is determined, press the bottom right button green "ROOT", and wait.
5. Then, after the last window, the device will reboot (And it can be disconnected from the computer).
6. Root entitled to receive!
Russification (Thanks to Timur):
- Set on the PC this Chinese VRoot
- Put on sotik "Chinese" root-rights
- Then go to the Play Store, we set out SuperSU
- Run it, he will offer to update binary.
- Click to continue, and then click "OK". Pops request of the Chinese root.
- Press the right button zelёnenkuyu. After SuperSU say that the installation is successful, it will prompt you to delete other applications control root-access.
- Click "Yes" forward (SuperSU remove our "Chinese" and replace it with a more simply). Writes again about the successful installation.
Note : The phone will ask you something in Chinese after you root the phone. Just click the right button when the phone pop-up something after you root. This is because right button is the 'YES' and left one is 'NO' and i think that is the phone is asking for root permission.
P/s : for some reason I cannot delete the pre-installed software on my phone, even using root explorer. Anyway, the softwares that need the phone rooted can be installed.

Unlocking bootloader

Pls can anyone help me to unlock the bootloader of samsung galaxy e700h along with its rooting process......
And suggest some custom roms

Ultrax Drago said:
Pls can anyone help me to unlock the bootloader of samsung galaxy e700h along with its rooting process......
And suggest some custom roms
Click to expand...
Click to collapse
Hey! there buddy..
For rooting have you tried the farmaroot app?? i've used it two times n that too with a success
Rooting:
Note:Rooting voids the warranty of the device...proceed at your own will!!
1.Download the farmaroot apk from the attachments. (present at the end of the post)
2.copy it to your device and install it. Note:Make sure u have unknown sources checked in your app settings in your device.If so proceed to step 3.
3.launch farmaroot and click install super SU.
4.Choose an exploit (for ex:Boromir)Note:if root fails, select another exploit from the dropdown and try again.
5.If It is successfull a message will popup saying "Success, installed superuser restart device".
6.Reboot the device..and woola!! ur phone is rooted.
100% success is not promised!!
Possible Cases --->
1."Success ... Superuser and su binary installed. You have to reboot your device"
2."Failed ... Exploit work but installation of Superuser and su binary have failed"
3."Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root", happen when the filesystem in use on system partition is a read only filesystem (ex: squashfs)
4."Failed ... Try another exploit if available"
5.Framaroot crash or freeze, in this case relaunch Framaroot a second time and select the same action and exploit.
Unlocking Bootloader
And coming to unlocking bootloader...i'am making a pc soft...it wud be most probably ready by tomorrow!!...i'll post it tomorrow....install it and unlock the bootloader.. i hope you are using Windows??

Lenovo A606 [FLASH CWM ][ROOT]

Today am going to show you how to root and flash our lenovo A606.
You may feel this method a little bit impractical and lengthy but its fact that non of the normal method works for the device .( that how i felt becuase non adb methods works).
And many helps found in internet were not working .
!!!!!!!!!!!!!!!!!!Do it in your own risk i am not responsible for any damage !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
REQUIRMENTS :
LENOVO A606
KINGROOT
FLASHIFY
CWM
DEVICE INFORMATION :
LenovoA606
ANDROID VERSION : 4.4.2
ANDROID VERSION NAME : KITKAT
PROCEDURES :
#Download kingroot and follow the steps to root the device( a method to root phone thru supersu will be posted soon)
#Download flashify and give root access
#In flashify goto backup option and backup option and backup your recovery (optional)
#Now Goto Flash Option And Choose Recovery
Goto To flash file option And Select The Cwm file downloaded before.
#It may take few minutes and after flashing it will show popup message showing "successful"
Now reboot your phone And Goto recovery and check whether its successful.
Links :
CWM :https://drive.google.com/file/d/0B6ruZNwe20sLRFJkNmJmenE2a2M/view?usp=drivesdk
kingroot : Google it.
Flashify : Playstore
END :
Thank me if you find this thread useful And it would be better if someone can make a thread for this device.

if you have ERROR flashing you can also try this
Unbrick Lenovo A606:
https://www.youtube.com/watch?v=XzHLxjSOELA
Repair IMEI after flashing without PC:
https://www.youtube.com/watch?v=SN64Mddr3AM&t
We know that Lenovo Doesnt have pre-installed Playstore so here is the instruction on how to install playstore
this also works on all Chinese phones:
https://www.youtube.com/watch?v=xJ2LAHMN4h0&t
Hope this all helps alot enjoy