wana root my moto e gen I, i have upgraded to lollipop,
the device space is too low,
i have tried it to root via twrp recovery v 2.7, 2.8 &2.10
all gives error, mismatched partition size,
guide
I thank you for using XDA Assist. Please only post your question in one thread per XDA rules. It gets too confusing if it's in multiple places. I see you've posted here also, http://forum.xda-developers.com/moto-e/help/how-to-root-moto-e-lollipop-t3028902. I'll close this thread.
Related
I am receiving an E980 today, new, AT&T version, unlocked. Since I am a NOOB at Root and Flash, I hope you can point me in the direction for my updating. I have been an Iphone Jailbreaker for the last 3 versions of iphone, so I understand following the corrrect procedures in the correct order.
I started out using Google to get an idea about rooting and flashing, but there is so much info and not everybody shows all the steps to accomplish what I want to do. I am looking to place my contacts which are in a saved vcards file on my desktop. (And I guess that is one of the first things I am supposed to do.) But, just as important, I want to Backup my entire system before making any changes, ROOT my LG PRO G to gain access and FLASH with most current ROM for KitKat,
Hi there,
For root I would look at this thread: [ROOT] for LG Optimus G Pro E98x + CWM + TWRP [s-off]
For a custom recovery to allow you to backup your system and data look further down the original post and here: Freegee OG Pro Edition
For further questions regarding your device, ask here: Optimus G Pro Q&A, Help & Troubleshooting
Noobiness
matt4321 said:
Hi there,
For root I would look at this thread: [ROOT] for LG Optimus G Pro E98x + CWM + TWRP [s-off]
For a custom recovery to allow you to backup your system and data look further down the original post and here: Freegee OG Pro Edition
For further questions regarding your device, ask here: Optimus G Pro Q&A, Help & Troubleshooting
Click to expand...
Click to collapse
Thanks for your excellent guidance. :good:
Help me please :< I flashed my moto g with the carbon rom from the moto g page of XDA but I had a bad recovery and it did not do a factory reset. When I flashed it my phone was empty and working good but I had one problem. As the phone was empty I had occupied 550 MB Which I suspect were the application cache or data or something like that.
I have already tried:
1.reflash the rom
2.factory reset
3.hard reset
4.flash another recovery(went from CWM to philz touch)
5.did the same steps again.
but still I got 550 MB occupied that the files cannot be seen by ES root explorer or by anything else I tried.
I went to the rom page but the thread is closed. Please help me
As you can see in the screenshot the numbers don't add up :/
PS. I don't thing its a roms problem I just messed something up
Hi there,
I'd suggest asking in this thread regarding help: [RC-FAQ] >> Frequently Asked Questions for Motorola Moto G [Updated : 2014/09/29]
When posting in XDA Assist please keep this statement in mind:
This is not a support forum, but rather a place to get some help by being pointed to the right thread.
Click to expand...
Click to collapse
Thank you and thread closed
i bought an acer liquid e 700 phone.i have tried to root it using kingoroot,framaroot,eroot,one click&finally using sp flash tool provided on our forum.none of these have worked.my kernel version is 3.4.67.built no is acer_av0k0_e39_1.022.00_aap_gen1.i used the sp flash tool to root&flash cwm recovery.clicking'download',gives me a message -"PMT changed for the ROM:it must be downloaded".what does that mean.i have rooted many devices like htc-1 v,lg optimus 2x,samsung 4s mini.one of the above methods has always worked.but not for acere700.can anyone help?
Hi
Thanks for writing to us at XDA Assist. A quick search allowed me to find this thread:
Root Acer Liquid E2
Good luck!
Thread closed, thanks.
Hello,
I am a newbie here, so please be patient. I apologise in advance if I have not posted my question in the correct place.
I have a Moto G 1st gen (XT1032). The bootloader is unlocked with the eventual goal of installing CM13. Previously, I have done this successfully with my old Moto E (1st gen).
No custom recovery is available, although I have flashed TWRP three times via cmd ...in the hope I could bully the Moto G into getting my own way...but no such luck. The error message on the phone reads: "Mismatched partition size (recovery)."
However, via cmd it would appear to have flashed successfully?
SuperSU reads: "There is no su binary installed and supersu cannot install it..."
Obviously, in an ideal world I should be able to load the missing binary files myself but I don't know where to start?
In spite of the problems, the mobile still appears to work fine, so hopefully, it's only a minor glitch that can be easily rectified. What is the best course of action for me to get this phone rooted and CM13 flashed.?
Many thanks for your help in advance.
Hi EmergeXT
Let me start stating that no question should be apologized. We are all equally newbies, each one in the others expertise's
So please, here on XDA, do never be afraid of asking yourself out. Be always extremely welcome.
Now, regarding your questions, I would invite you to contact our Moto G experts at the below Forum. They should be able to help you.
Moto G Q&A, Help & Troubleshooting
Thank you for using XDA Assist.
Good luck and mainly, have fun.
.
EmergeXT said:
Hello,
I am a newbie here, so please be patient. I apologise in advance if I have not posted my question in the correct place.
I have a Moto G 1st gen (XT1032). The bootloader is unlocked with the eventual goal of installing CM13. Previously, I have done this successfully with my old Moto E (1st gen).
No custom recovery is available, although I have flashed TWRP three times via cmd ...in the hope I could bully the Moto G into getting my own way...but no such luck. The error message on the phone reads: "Mismatched partition size (recovery)."
However, via cmd it would appear to have flashed successfully?
SuperSU reads: "There is no su binary installed and supersu cannot install it..."
Obviously, in an ideal world I should be able to load the missing binary files myself but I don't know where to start?
In spite of the problems, the mobile still appears to work fine, so hopefully, it's only a minor glitch that can be easily rectified. What is the best course of action for me to get this phone rooted and CM13 flashed.?
Many thanks for your help in advance.
Click to expand...
Click to collapse
Hey Kdio,
Your help is much appreciated.
Thank you.
Kdio said:
Hi EmergeXT
Let me start stating that no question should be apologized. We are all equally newbies, each one in the others expertise's
So please, here on XDA, do never be afraid of asking yourself out. Be always extremely welcome.
Now, regarding your questions, I would invite you to contact our Moto G experts at the below Forum. They should be able to help you.
Moto G Q&A, Help & Troubleshooting
Thank you for using XDA Assist.
Good luck and mainly, have fun.
.
Click to expand...
Click to collapse
I rooted my LG G Flex 2 successfully. Thankss to XDA thread.
It worked well for few hours as I was exploring number of APPs
I had not flashed the ROM yet and never intended to do so. I just wanted to get rid of stock apps.
Suddenly I got a message about some instalation TWRP from an APP ( I think it was Super SU)
I accepted and it has got into loop infinite with the error message - Authentication Error # 9
Can someone help me. Has anyone encountered this. I found lot of threads here but none of them is specific to this.
Can you explain what the problem is and the resolution
Hi,
Try posting your question here:
http://forum.xda-developers.com/g-flex2/help
The experts there may be able to help.
Good luck!