[Completed] [Q] Bad Flash/Memory cut - XDA Assist

Help me please :< I flashed my moto g with the carbon rom from the moto g page of XDA but I had a bad recovery and it did not do a factory reset. When I flashed it my phone was empty and working good but I had one problem. As the phone was empty I had occupied 550 MB Which I suspect were the application cache or data or something like that.
I have already tried:
1.reflash the rom
2.factory reset
3.hard reset
4.flash another recovery(went from CWM to philz touch)
5.did the same steps again.
but still I got 550 MB occupied that the files cannot be seen by ES root explorer or by anything else I tried.
I went to the rom page but the thread is closed. Please help me
As you can see in the screenshot the numbers don't add up :/
PS. I don't thing its a roms problem I just messed something up

Hi there,
I'd suggest asking in this thread regarding help: [RC-FAQ] >> Frequently Asked Questions for Motorola Moto G [Updated : 2014/09/29]
When posting in XDA Assist please keep this statement in mind:
This is not a support forum, but rather a place to get some help by being pointed to the right thread.
Click to expand...
Click to collapse
Thank you and thread closed

Related

[Completed] can u help meee???

Hi!!i have a motorola xt910 razr it has 2 firmwares...i buy it that way...the problem i have is that i cant delete nothing from the phone (apps,fotos,....etc)and on camera said camera has stopped..android procces has stoped and many other has stoped..i try to wipe data format and when i open it everything is just like before nothing deleted.. plsss HEEEEEEELP!!!!
XDA Visitor said:
Hi!!i have a motorola xt910 razr it has 2 firmwares...i buy it that way...the problem i have is that i cant delete nothing from the phone (apps,fotos,....etc)and on camera said camera has stopped..android procces has stoped and many other has stoped..i try to wipe data format and when i open it everything is just like before nothing deleted.. plsss HEEEEEEELP!!!!
Click to expand...
Click to collapse
First I recommend to read the Frequently Asked Questions - Motorola Razr [XT912, XT910, XT908] (2015).
There you might find many helpful things about your device and how to restore stock firmware (a link to the guide is in the first post ... see Q6).
If this won't help in your case, please register on xda and ask in the Droid RAZR Q&A, Help & Troubleshooting forum.
Good luck !
Thread closed. Thank you!

[Completed] Zest T1 repartition

Updated my zest t1 with software upgrade off their site to repartition the memory.
Worked fine and memory etc was successful.
HOWEVER on start-up the screen is completely out of focus.
Please help. Is their a fix or reset . Thanks
XDA Visitor said:
Updated my zest t1 with software upgrade off their site to repartition the memory.
Worked fine and memory etc was successful.
HOWEVER on start-up the screen is completely out of focus.
Please help. Is their a fix or reset . Thanks
Click to expand...
Click to collapse
Hi smart guy,
have you already asked the same question here?
Please avoid double posting.
As there is not much about your exact device on xda (I found only this rooting thread: [ROOT/GUIDE] Zest T1-G46 by ka13b), the place where you ave asked in the first place is the right one.
Just give the other smart guy a little bit more time to read and hopefully answer your question.
BTW ... no chance to contact the official support of the manufacturer from where you have installed the update?
Thanks for your understanding. Thread closed.

[Completed] olegario dia

Hey eveyrone i have a problem with my alcatel ot-991.I rooted before two days and deleted some app one of them i think that had a name like jada or something today i tried to factory restore my phone and when it comes to first setup after i complete the steps an error hops to the screen says com.jrdcom.JrdSetupWizard had to stop and i press force close and it takes me back to 1st step what can i do???did i destroyed my phone ? :/ some one plz help me can i reinstall alcatel ot-991 stock os or something ?
XDA Visitor said:
Hey eveyrone i have a problem with my alcatel ot-991.I rooted before two days and deleted some app one of them i think that had a name like jada or something today i tried to factory restore my phone and when it comes to first setup after i complete the steps an error hops to the screen says com.jrdcom.JrdSetupWizard had to stop and i press force close and it takes me back to 1st step what can i do???did i destroyed my phone ? :/ some one plz help me can i reinstall alcatel ot-991 stock os or something ?
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
First, please create an account so you can post in other forums.
After creating your account, please post your question here:
http://forum.xda-developers.com/android/help
There's no specific forum for your device, however the thread I'm directing you to is filled with expert advice.
Good luck!

[Completed] Asus ZenFone 2 ZE551ML recovery and fast boot doesnt work

Phone: Asus Zenfone 2
Model: ZE551ML
CPU: Quad-core 2.3Ghz
RAM: 4GB
Storage: 32Gb
Root: Used QuickRoot to gain root privileges
Bootloader: Not unlocked, at least not intentionally...
Hello dear XDA members,
I am posting this because I have quite unusual problem with my Recovery Mode.
Like everybody else here I rooted my phone to get rid of the pre-installed cra.. I mean BloatAware. After the root everything was successful and I managed to delete all the apps that I am not going to use and that I don't need. I didn't delete any of the key modules except S-KEY Cleaner if that is of some relevance.
So how all this happened?
I was looking into flashing ROM called BlissPop because Lolipop has a RAM leak and I find it quite annoying. So I started doing the steps...
I think my recovery stopped working after I installed TWRP app from Google Play store and tried to make a recovery.
I prepared all the zip folders on my phone and turned off my phone. I used Power key + Vol UP to get to the menu.
There are few of the lines missing like "Secure_Boot - ?" and "Signing - ?" which doesnt seem to be the case when I looked at other threads.
When I press power button to select Recovery Mode it just reboots and pops up the same menu. No error messages or pictures on the screen.
Dont forget that I didnt NOT unlock bootloader.
So.. Does anybody knows what is the problem and what should I do? Because I want that Blisspop so bad. To add to that I am a full time traveler at the moment and I cant afford to brick my phone as I am 35.000km away from home.
If anybody has the time and energy to explain me step by step process how to do all that + how to flash BlissPop ROM and Gapps I would sincerely appreciate it.
If I missed any relevant detail please ask and Ill try my best to answer as accurately as possible.
Thank you so much for your time.
P.S. I cant post outside link, but if you want the picture Ill send it by phone, mail, or whatever.
Hi
Welcome to xda.
Thanks for being so thorough and descriptive in your question. That makes it much easier for people to provide help.
Your devices Q&A is located here > Asus ZenFone 2 > ZenFone 2 Q&A, Help & Troubleshooting.
If you don't find any information regarding your problem then feel free to post your question here [GENERAL HELP] Post Your Questions Here Instead of Making a New Thread or make a new thread in Q&A.
Hello again guys!
I think I am on the right track. I did my homework and read a lot of threads about bootloaders and recoveries. I will test it out soon and tell you guys if I managed to fix it and what did it take.
Wish me luck!
civelja5 said:
Hello again guys!
I think I am on the right track. I did my homework and read a lot of threads about bootloaders and recoveries. I will test it out soon and tell you guys if I managed to fix it and what did it take.
Wish me luck!
Click to expand...
Click to collapse
Well done mate Good to see you found your way.
As this is resolved I'll have to close this thread now. Enjoy the site. :good:

[Completed] No SU binary installed?

Hello,
I am a newbie here, so please be patient. I apologise in advance if I have not posted my question in the correct place.
I have a Moto G 1st gen (XT1032). The bootloader is unlocked with the eventual goal of installing CM13. Previously, I have done this successfully with my old Moto E (1st gen).
No custom recovery is available, although I have flashed TWRP three times via cmd ...in the hope I could bully the Moto G into getting my own way...but no such luck. The error message on the phone reads: "Mismatched partition size (recovery)."
However, via cmd it would appear to have flashed successfully?
SuperSU reads: "There is no su binary installed and supersu cannot install it..."
Obviously, in an ideal world I should be able to load the missing binary files myself but I don't know where to start?
In spite of the problems, the mobile still appears to work fine, so hopefully, it's only a minor glitch that can be easily rectified. What is the best course of action for me to get this phone rooted and CM13 flashed.?
Many thanks for your help in advance.
Hi EmergeXT
Let me start stating that no question should be apologized. We are all equally newbies, each one in the others expertise's
So please, here on XDA, do never be afraid of asking yourself out. Be always extremely welcome.
Now, regarding your questions, I would invite you to contact our Moto G experts at the below Forum. They should be able to help you.
Moto G Q&A, Help & Troubleshooting
Thank you for using XDA Assist.
Good luck and mainly, have fun.
.
EmergeXT said:
Hello,
I am a newbie here, so please be patient. I apologise in advance if I have not posted my question in the correct place.
I have a Moto G 1st gen (XT1032). The bootloader is unlocked with the eventual goal of installing CM13. Previously, I have done this successfully with my old Moto E (1st gen).
No custom recovery is available, although I have flashed TWRP three times via cmd ...in the hope I could bully the Moto G into getting my own way...but no such luck. The error message on the phone reads: "Mismatched partition size (recovery)."
However, via cmd it would appear to have flashed successfully?
SuperSU reads: "There is no su binary installed and supersu cannot install it..."
Obviously, in an ideal world I should be able to load the missing binary files myself but I don't know where to start?
In spite of the problems, the mobile still appears to work fine, so hopefully, it's only a minor glitch that can be easily rectified. What is the best course of action for me to get this phone rooted and CM13 flashed.?
Many thanks for your help in advance.
Click to expand...
Click to collapse
Hey Kdio,
Your help is much appreciated.
Thank you.
Kdio said:
Hi EmergeXT
Let me start stating that no question should be apologized. We are all equally newbies, each one in the others expertise's
So please, here on XDA, do never be afraid of asking yourself out. Be always extremely welcome.
Now, regarding your questions, I would invite you to contact our Moto G experts at the below Forum. They should be able to help you.
Moto G Q&A, Help & Troubleshooting
Thank you for using XDA Assist.
Good luck and mainly, have fun.
.
Click to expand...
Click to collapse

Categories

Resources