Hello,
I am a newbie here, so please be patient. I apologise in advance if I have not posted my question in the correct place.
I have a Moto G 1st gen (XT1032). The bootloader is unlocked with the eventual goal of installing CM13. Previously, I have done this successfully with my old Moto E (1st gen).
No custom recovery is available, although I have flashed TWRP three times via cmd ...in the hope I could bully the Moto G into getting my own way...but no such luck. The error message on the phone reads: "Mismatched partition size (recovery)."
However, via cmd it would appear to have flashed successfully?
SuperSU reads: "There is no su binary installed and supersu cannot install it..."
Obviously, in an ideal world I should be able to load the missing binary files myself but I don't know where to start?
In spite of the problems, the mobile still appears to work fine, so hopefully, it's only a minor glitch that can be easily rectified. What is the best course of action for me to get this phone rooted and CM13 flashed.?
Many thanks for your help in advance.
Hi EmergeXT
Let me start stating that no question should be apologized. We are all equally newbies, each one in the others expertise's
So please, here on XDA, do never be afraid of asking yourself out. Be always extremely welcome.
Now, regarding your questions, I would invite you to contact our Moto G experts at the below Forum. They should be able to help you.
Moto G Q&A, Help & Troubleshooting
Thank you for using XDA Assist.
Good luck and mainly, have fun.
.
EmergeXT said:
Hello,
I am a newbie here, so please be patient. I apologise in advance if I have not posted my question in the correct place.
I have a Moto G 1st gen (XT1032). The bootloader is unlocked with the eventual goal of installing CM13. Previously, I have done this successfully with my old Moto E (1st gen).
No custom recovery is available, although I have flashed TWRP three times via cmd ...in the hope I could bully the Moto G into getting my own way...but no such luck. The error message on the phone reads: "Mismatched partition size (recovery)."
However, via cmd it would appear to have flashed successfully?
SuperSU reads: "There is no su binary installed and supersu cannot install it..."
Obviously, in an ideal world I should be able to load the missing binary files myself but I don't know where to start?
In spite of the problems, the mobile still appears to work fine, so hopefully, it's only a minor glitch that can be easily rectified. What is the best course of action for me to get this phone rooted and CM13 flashed.?
Many thanks for your help in advance.
Click to expand...
Click to collapse
Hey Kdio,
Your help is much appreciated.
Thank you.
Kdio said:
Hi EmergeXT
Let me start stating that no question should be apologized. We are all equally newbies, each one in the others expertise's
So please, here on XDA, do never be afraid of asking yourself out. Be always extremely welcome.
Now, regarding your questions, I would invite you to contact our Moto G experts at the below Forum. They should be able to help you.
Moto G Q&A, Help & Troubleshooting
Thank you for using XDA Assist.
Good luck and mainly, have fun.
.
Click to expand...
Click to collapse
Related
Hi,
I recently tried to root my LG G3 (d855) with help from this Post http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
Since this did not seem to work I tried various different methods: All of them stated that my device is rooted but when I went to check on my Phone it wasn't. Then I found out that no Superuser File was installed and this seems to be the reason for it not tho work. Is there a way to install this manually? And how do i do it?
(I don't know much about that kinda stuff so detailed please)
Hi there,
You'd be best served asking for help from the experts who own your device here:
LG G3 Ask Away help thread.
Good luck
Hi, I really need help, last night I bricked my moto g so, I did all the steps to get my phone running again at first i installed a kitkat version of android and noticed that wifi was not working and could't go on the internet wifi the data, i thought that something had gone wrong so i chamged my rom to lollipop 5.0.2 and it still dosent work i have no idea what it could be if anyone could help i would really appreciate it.
XDA Visitor said:
Hi, I really need help, last night I bricked my moto g so, I did all the steps to get my phone running again at first i installed a kitkat version of android and noticed that wifi was not working and could't go on the internet wifi the data, i thought that something had gone wrong so i chamged my rom to lollipop 5.0.2 and it still dosent work i have no idea what it could be if anyone could help i would really appreciate it.
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Moto G Q&A, Help & Troubleshooting
Your device experts are located there....(You will have a much better chance of getting help there)
Also, here is the Main Moto G Area just in case:
http://forum.xda-developers.com/moto-g
Always Remember to use the Search...
Thank you! Hope this help!
Hello. I'm quite new to this site and don't really know my way around. I have almost no background knowledge in rooting any phone at all. I would greatly appreciate it if someone could direct me somewhere where I can find a simple guide on how to root it, speed up my phone, and improve battery life.
Phone details:
Moto G (1st Gen.)
Android version is 5.1
(Not sure if anything more is needed)
Thanks for any help regarding this (and apologies if I caused any inconveniences)!
Bump
Edit: Would this still work for my phone even though it came out two years ago and that I have an xt1031?
http://forum.xda-developers.com/moto-g/help/guide-root-xt1032-xt1033-moto-g-running-t2965507
By this point I'm starting to suspect that there is no root for my phone/no known guide I could be directed to. If so, could someone confirm this?
Bump
I'm really beginning to loathe bumping this. If you guys need any more information just ask, as I said in the original post, I don't know everything that is needed.
Helgrinds said:
I'm really beginning to loathe bumping this. If you guys need any more information just ask, as I said in the original post, I don't know everything that is needed.
Click to expand...
Click to collapse
Hi,
See question 8 of this FAQ.
The best place to get help for this sort of thing would be in > Moto G > Moto G Q&A, Help & Troubleshooting.
Good luck
Hi guys, i just bought a BLU STUDIO G "HD" (S170L_V13)(Lollipop 5.1) but i found nothing of how to root and/or ROM. I try Kingo and Towel with no success (uff, no brick), also need recovery for this phone.
I dont know if the BLU STUDIO G (not HD) will work for my phone, i dont wanna brick it. I've read all Studio G but like a say, dont know if will work for my HD and i dont want to "assume" it will work.
If some one can give me some info about it, much appreciated.
MAY BE NO ONE CARES BUT I'LL BE POSTING MY UPDATES FOR PEOPLE WITH THE SAME PHONE "BLU STUDIO HD (S170L_V13)
I try just one more time KINGOROOT and it work, SuperUser was installed and remove apps that i want, then install SuperSU and like always ask to update Binary, i update it successfully and restart, one's restarted remove SuperUser of Kingo and done.. I have root and SuperSU Installed with no problems at all.
Searching for the ROM after many hours found the stock ROM for this phone by William Smith (BLU Dev) https://www.mediafire.com/folder/5gegw4ka4f72u/Studio_G_HD_S170L. the ROM is in .pac and you have to use SPD Upgrade Tool to installed. All the info is here https://androidmtk.com/flash-pac-stock-rom-android-smartphone, I have not tested but I took the risk rooting cus I found the rom so do it at you own risk.
I try to install Xposed but the phone is lollipop and x64 which is not compatible, I read some xda threads but tbh is kind of confusing for my, TMI jeje.
If someone can please tell me how to do it, how to install Xposed in Lollipop
Thanks in advance.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
I rooted my LG G Flex 2 successfully. Thankss to XDA thread.
It worked well for few hours as I was exploring number of APPs
I had not flashed the ROM yet and never intended to do so. I just wanted to get rid of stock apps.
Suddenly I got a message about some instalation TWRP from an APP ( I think it was Super SU)
I accepted and it has got into loop infinite with the error message - Authentication Error # 9
Can someone help me. Has anyone encountered this. I found lot of threads here but none of them is specific to this.
Can you explain what the problem is and the resolution
Hi,
Try posting your question here:
http://forum.xda-developers.com/g-flex2/help
The experts there may be able to help.
Good luck!