I rooted my LG G Flex 2 successfully. Thankss to XDA thread.
It worked well for few hours as I was exploring number of APPs
I had not flashed the ROM yet and never intended to do so. I just wanted to get rid of stock apps.
Suddenly I got a message about some instalation TWRP from an APP ( I think it was Super SU)
I accepted and it has got into loop infinite with the error message - Authentication Error # 9
Can someone help me. Has anyone encountered this. I found lot of threads here but none of them is specific to this.
Can you explain what the problem is and the resolution
Hi,
Try posting your question here:
http://forum.xda-developers.com/g-flex2/help
The experts there may be able to help.
Good luck!
Related
I just purchased a LG G Pro E980 and want to use it on ST, the problem is the APN TYPE is greyed out.
After looking through your forum I found that someone said you have to use SQLite to fix this problem and they put what are supposed to be steps 1-10 basically, but.... whenever I try to follow these steps I FAIL miserably !!!
I am VERY new to this type of thing and I think that I am just simply not understanding the steps correctly.
Can someone that is familiar with SQLite PLEASE HELP ME ????
This is driving me absolutely insane....I previously owned an LG D801 G2 that I used on ST with this very sim card until it broke and I never had to do any of this !!!!!
PLEASE, PLEASE, PLEASE, HELP ME !!!!!
1fast93stang said:
I just purchased a LG G Pro E980 and want to use it on ST, the problem is the APN TYPE is greyed out.
After looking through your forum I found that someone said you have to use SQLite to fix this problem and they put what are supposed to be steps 1-10 basically, but.... whenever I try to follow these steps I FAIL miserably !!!
I am VERY new to this type of thing and I think that I am just simply not understanding the steps correctly.
Can someone that is familiar with SQLite PLEASE HELP ME ????
This is driving me absolutely insane....I previously owned an LG D801 G2 that I used on ST with this very sim card until it broke and I never had to do any of this !!!!!
PLEASE, PLEASE, PLEASE, HELP ME !!!!!
Click to expand...
Click to collapse
Here you can find general information about SQLite: Simplify SQLite Usage on Android with DBXDroid.
Best is to ask in the Optimus G Pro Q&A, Help & Troubleshooting to get help especially for your device.
OK, so here's what I have figured out : the one click kit Kat root doesn't seem to work with my phone (LG E980) BUT.... Stump grinder root worked perfectly and once installed, I was then able to open sqlite and edit my apn settings and now device works absolutely perfect on the ST network.
Thanks to anyone who took the time to at least read my post.
1fast93stang said:
OK, so here's what I have figured out : the one click kit Kat root doesn't seem to work with my phone (LG E980) BUT.... Stump grinder root worked perfectly and once installed, I was then able to open sqlite and edit my apn settings and now device works absolutely perfect on the ST network.
Thanks to anyone who took the time to at least read my post.
Click to expand...
Click to collapse
Thanks for letting us know. Thread closed.
My tapatalk signature:
Device: SGS5 (SM-G900F)
ROM: AllianceROM v5.6
Kernel: Stock G900FXXU1ANG2
Recovery: TWRP
Modem: G900FXU1ANG7
If you have any question about or any issue with your SGS2, just ask in the New members friendly Q&A thread.
... for the SGS5, just ask in the Noob friendly S5 All in one support thread
If you need general help/assistence, please go to XDA-Assist.
Hi,
I recently tried to root my LG G3 (d855) with help from this Post http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
Since this did not seem to work I tried various different methods: All of them stated that my device is rooted but when I went to check on my Phone it wasn't. Then I found out that no Superuser File was installed and this seems to be the reason for it not tho work. Is there a way to install this manually? And how do i do it?
(I don't know much about that kinda stuff so detailed please)
Hi there,
You'd be best served asking for help from the experts who own your device here:
LG G3 Ask Away help thread.
Good luck
Hi,
Need help very badly ... Tried all the methods mentioned on web starting from factory reset to Stock Rom to setting the SMSC number
Here is what my problem is
NOT able to send sms or receive SMS on MOTO G gen 1
I was using CM12.1 initially , which was good but the Gmaps were not comfy in it ( the gps used to get lost often)
Then i moved to a Custom ROM of 5.1 ( dont remember the maker basically a stock one but some boatware removed)... this is when the problem started
since then I have tried all the stuff mentioned on the forum but no help
Any way i can get it serviced , probably by locking the bootlocker and going to a service center and getting it fixed OR
IS THERE ANY OTHER SOLUTION
PLEASE HELP
smarannss said:
Hi,
Need help very badly ... Tried all the methods mentioned on web starting from factory reset to Stock Rom to setting the SMSC number
Here is what my problem is
NOT able to send sms or receive SMS on MOTO G gen 1
I was using CM12.1 initially , which was good but the Gmaps were not comfy in it ( the gps used to get lost often)
Then i moved to a Custom ROM of 5.1 ( dont remember the maker basically a stock one but some boatware removed)... this is when the problem started
since then I have tried all the stuff mentioned on the forum but no help
Any way i can get it serviced , probably by locking the bootlocker and going to a service center and getting it fixed OR
IS THERE ANY OTHER SOLUTION
PLEASE HELP
Click to expand...
Click to collapse
Hi,
There is a forum dedicated specifically for your device. You shall try to ask your question there http://forum.xda-developers.com/moto-g/help to get better help and support.
Good luck
Thread closed, thank you
I tried all the softwares for the lg g stylo & none of em seemed to work I been trying it literally over and over all night nd nothing . can someone just show me the simplest way possible besides all these complications so my phone will stop being a dead brick .
XDA Visitor said:
I tried all the softwares for the lg g stylo & none of em seemed to work I been trying it literally over and over all night nd nothing . can someone just show me the simplest way possible besides all these complications so my phone will stop being a dead brick .
Click to expand...
Click to collapse
Hi and welcome to XDA.
Please create an account so you can have full posting privileges.
Then you can post your question here:
> LG G Stylo > LG G Stylo Questions & Answers
Experts there may be able to help you.
Good luck
Hello,
I am a newbie here, so please be patient. I apologise in advance if I have not posted my question in the correct place.
I have a Moto G 1st gen (XT1032). The bootloader is unlocked with the eventual goal of installing CM13. Previously, I have done this successfully with my old Moto E (1st gen).
No custom recovery is available, although I have flashed TWRP three times via cmd ...in the hope I could bully the Moto G into getting my own way...but no such luck. The error message on the phone reads: "Mismatched partition size (recovery)."
However, via cmd it would appear to have flashed successfully?
SuperSU reads: "There is no su binary installed and supersu cannot install it..."
Obviously, in an ideal world I should be able to load the missing binary files myself but I don't know where to start?
In spite of the problems, the mobile still appears to work fine, so hopefully, it's only a minor glitch that can be easily rectified. What is the best course of action for me to get this phone rooted and CM13 flashed.?
Many thanks for your help in advance.
Hi EmergeXT
Let me start stating that no question should be apologized. We are all equally newbies, each one in the others expertise's
So please, here on XDA, do never be afraid of asking yourself out. Be always extremely welcome.
Now, regarding your questions, I would invite you to contact our Moto G experts at the below Forum. They should be able to help you.
Moto G Q&A, Help & Troubleshooting
Thank you for using XDA Assist.
Good luck and mainly, have fun.
.
EmergeXT said:
Hello,
I am a newbie here, so please be patient. I apologise in advance if I have not posted my question in the correct place.
I have a Moto G 1st gen (XT1032). The bootloader is unlocked with the eventual goal of installing CM13. Previously, I have done this successfully with my old Moto E (1st gen).
No custom recovery is available, although I have flashed TWRP three times via cmd ...in the hope I could bully the Moto G into getting my own way...but no such luck. The error message on the phone reads: "Mismatched partition size (recovery)."
However, via cmd it would appear to have flashed successfully?
SuperSU reads: "There is no su binary installed and supersu cannot install it..."
Obviously, in an ideal world I should be able to load the missing binary files myself but I don't know where to start?
In spite of the problems, the mobile still appears to work fine, so hopefully, it's only a minor glitch that can be easily rectified. What is the best course of action for me to get this phone rooted and CM13 flashed.?
Many thanks for your help in advance.
Click to expand...
Click to collapse
Hey Kdio,
Your help is much appreciated.
Thank you.
Kdio said:
Hi EmergeXT
Let me start stating that no question should be apologized. We are all equally newbies, each one in the others expertise's
So please, here on XDA, do never be afraid of asking yourself out. Be always extremely welcome.
Now, regarding your questions, I would invite you to contact our Moto G experts at the below Forum. They should be able to help you.
Moto G Q&A, Help & Troubleshooting
Thank you for using XDA Assist.
Good luck and mainly, have fun.
.
Click to expand...
Click to collapse