[Q] Major problem with original Flip cover on Lolipop - ONE Q&A, Help & Troubleshooting

Hi experts,
on CM12 is big problem with filp cover and vibration on incoming call
The same probem is described on google Issue 80399.
I must do downgrade on CM11 because this is really anoying
Have any one fix on this problem?? If not i must believe it will be fixed soon.
Regads
Hefk

Vibration flip cover issue fix
I've created this tool to fix the issue on my nexus 5:
play.google.com/store/apps/details?id=org.koradesktop.mylongvibrator&hl=en
Some users reported that works also with:
Xperia Z1 (C6903), Moto G

Related

[Q] Problem in phone after jelly bean update

After I have updated to Jelly bean 4.1 on my nexus s GT-I9023 phone I am facing problem which is given below
1) When I press call button for calling some person there is black out on the screen and all my buttons on the phone become nonfunctional .
3) When I receive the call from some person some time the call button doesn't function.
2) Third problem is my proximity sensor on the device which has stopped functioning after the update.
Please provide solution for this if any body has .I have already tried to reset my phone but still the problem exist .
Regards
Akhil
Same problem...... any fix out there?
Are others experiencing this problem?
Sent from my HTC One S using Tapatalk 2

[Q] Moto G - Screen does not wake in Flip Case.

Hi Everyone
I am using indian version of Moto G (Dual Sim) :angel: with Kitkat Vers. 4.4.2. :victory:
Also, purchased a Nillkin Fresh Leather Flip Diary Cover Case For Motorola Moto G. (see image)
Now, benefit of this case is that it has a cut out on the top side of the flip (see image), so that whenever there is an incoming call,caller id should be visible in that cut out. This was the primary reason to buy such an overpriced case.
It also locks the screen when you close the flip and wakes up the screen when you open the flip. Smart thing to have !:good:
But, unfortunately the screen remains off whenever there is an incoming call, it remians off until you open the flip. Ideally screen should wake up for incoming call even if the proximity sensor is blocked until you answer the call. Its definitely the proximity sensor at work but its not serving the purpose of the cut out.
If any one noticed the same issue and has a solution to the problem, please feel free to answer or PM me ! Would be highly Obliged !
same issue with me plz tell the solution
hi
same with me please anyone tell the solution
Grab a magnet and try the following: http://www.youtube.com/watch?v=L_KL60gf_hU
If this works for you the issue is related with the cover.
I bought the same cover and I faced same problem ,,, any solution please .
If you are rooted, you can try this xposed mod.
http://tinyurl.com/qbpjv22/MotoMagnetOff_test3.apk
I've just added an setting checkbox to wake the phone if it's ringing.
Moto G - Screen does not wake in Flip Case.
hi anish.awalkar ..have you got the solution?

Phone vibrates only once on incoming call (Android L)

Hello,
Anyone else experienced this?
When receiving a call, my phone only vibrates once. Ringtone is still there. I'm using LG's QuickCover for Nexus 5.
Is there a way to solve this?
Same here. It's horrible because the phone only vibrates one...
NEXUS % - ANDROID L
I have quick cover too. I was trying call without this cover and vibrate was working. When I closed the phone, vibrate worked as you described...
So it's a bug with the OFFICIAL cover?! I have receiver OTA yesterday and i discover that bug, the battery drains quickly and the lockscreen created by user preferences just disappeared as the silent mode... Common Google what is this?! Please fix that!
Yes, official cover.. Its a pity.. I really do miss a lot of calls because of that bug..
Nexoez said:
Yes, official cover.. Its a pity.. I really do miss a lot of calls because of that bug..
Click to expand...
Click to collapse
I hope Google fix that mess...
Same thing here, but for me it only occurs sometimes.
Noticed it the first time today after flashing the factory image from release day.
Also with the quick cover...
Same problem for me
I'm having the same problem with my Nexus 5 w/quick cover. With the cover on, my phone will only vibrate once for incoming calls when set to vibrate. If I remove the cover the phone will continue to vibrate when receiving an incoming call. GOOGLE, PLEASE FIX THIS BUG.!
Nexoez said:
Hello,
Anyone else experienced this?
When receiving a call, my phone only vibrates once. Ringtone is still there. I'm using LG's QuickCover for Nexus 5.
Is there a way to solve this?
Click to expand...
Click to collapse
Same here!
I tried even with Cyanogenmod 12 unofficial rom (based on 5.0.1) and still the same bug.
Come on Google!
Bug still present in 5.0.1 ?
DennizzNL said:
Bug still present in 5.0.1 ?
Click to expand...
Click to collapse
Bug still present after flashing the 5.0.1 Factory Image
Any workaround with stock?
Yes bug still appearing on Android 5.0.1
Hi guys. Could this be your problem? I was having same issue too.
Search on YouTube: My Google Nexus 5 is Not Vibrating - HOW TO FIX IT
Problem still not fixed after 5.1 update
Issue still in 5.1.1
Installed smart vibtrator and that seems to work..
Short vibrate with LG Quick Cover
I've created this tool to fix the issue on my nexus 5:
play.google.com/store/apps/details?id=org.koradesktop.mylongvibrator&hl=en

[Q] Proximity & Light Sensor Not Working In 5.0 Factory Update

Hey Everyone,
I have installed factory image of 5.0 on my Nexus & since then I am facing the issue. My screen doesn't go off during calls & light sensor is also not working; Auto Brightness is also not working. I tried pulling back to 4.4 through which I made sure my hardware is working fine. It wasn't working in 5.0 Lollipop.
Has anybody else faced the same issue & does anyone know how to fix it?
Have attached the screenshot from CPU-Z.
Nyk
NykBradley said:
Hey Everyone,
I have installed factory image of 5.0 on my Nexus & since then I am facing the issue. My screen doesn't go off during calls & light sensor is also not working; Auto Brightness is also not working. I tried pulling back to 4.4 through which I made sure my hardware is working fine. It wasn't working in 5.0 Lollipop.
Has anybody else faced the same issue & does anyone know how to fix it?
Have attached the screenshot from CPU-Z.
Nyk
Click to expand...
Click to collapse
A few other people are also experiencing the same problem. You can follow another thread here .
There are multiple threads for this already. Please posthttp://forum.xda-developers.com/showthread.php?t=2941045 in them.
Also there is a bughttps://code.google.com/p/android/i...s Owner Summary Stars&groupby=&sort=&id=80149 report in Google. Please provide your input and vote for the bug for resolution.
Sent from my Nexus 5 using XDA Free mobile app
I have the same problem...
Any fix?

M2 Aqua Accelerometer Bug

My GF's M2 Aqua has a bug with the accelerometer. If she makes a longish phone call the accelerometer stops working (i.e. no auto-rotate) without a reboot. Looks like I'm not the only one:
https://talk.sonymobile.com/t5/Xperia-M2-M2-dual-M2-Aqua/accelerometer-bug/td-p/918650/page/16
Anyone else facing this?
Apparently Sony are finally looking into it and hopefully will issue a fix in another firmware release.
Usually I'd just flash a custom ROM but there doesn't seem to be any reliable builds with a fully working camera...
I confirm that this happens to me too, I just hate it because it worked if I had NFC activated in the update before 18.3.1.c.1.13.
temporary solution
it seems that the proximity sensor has something to do with it.
somehow after a long call it stucks and blocks even the accelerometer and the compass sensors.
it happens even to me and you have to restart your device to work again, but if you talk using the headset or if you press the power button while you are talking at the phone you can avoid the bug.
for me is working all the time and i can wait patiently until the official fix
Looking at the other thread I posted, one of the users said a new firmware update has been pushed with the same version number. Let's hope it fixes it...
Accelelometer bug tread
maxray said:
it seems that the proximity sensor has something to do with it.
somehow after a long call it stucks and blocks even the accelerometer and the compass sensors.
it happens even to me and you have to restart your device to work again, but if you talk using the headset or if you press the power button while you are talking at the phone you can avoid the bug.
for me is working all the time and i can wait patiently until the official fix
Click to expand...
Click to collapse
Thanks for the tip, but :confused for how long should i press the power button...just one click or during the conversation?
Just enough to wake up the screen, can't say as my M2 has it as never had a problem of on my own one
D2303 stock 4.4.4 KK rooted philz touch recovery xposed Bravia engine 2 x-reality
I think it only affects the Aqua (2403) model. Anyway, I installed a kernel for the standard M2 model following the instructuions here: http://forum.xda-developers.com/xpe...a-2403-root-philz-touch-t3072833/post60152564 and it seems to have fixed the issue.
Apparently Sony are about to issue another software update, but I'll hold off on that until I know the status of this bug...
I have the latest update 1.15 and it seems that it doesn't have the bug anymore. I am quite happy now with phone. Hope it works for everybody

Categories

Resources