Hi Everyone
I am using indian version of Moto G (Dual Sim) :angel: with Kitkat Vers. 4.4.2. :victory:
Also, purchased a Nillkin Fresh Leather Flip Diary Cover Case For Motorola Moto G. (see image)
Now, benefit of this case is that it has a cut out on the top side of the flip (see image), so that whenever there is an incoming call,caller id should be visible in that cut out. This was the primary reason to buy such an overpriced case.
It also locks the screen when you close the flip and wakes up the screen when you open the flip. Smart thing to have !:good:
But, unfortunately the screen remains off whenever there is an incoming call, it remians off until you open the flip. Ideally screen should wake up for incoming call even if the proximity sensor is blocked until you answer the call. Its definitely the proximity sensor at work but its not serving the purpose of the cut out.
If any one noticed the same issue and has a solution to the problem, please feel free to answer or PM me ! Would be highly Obliged !
same issue with me plz tell the solution
hi
same with me please anyone tell the solution
Grab a magnet and try the following: http://www.youtube.com/watch?v=L_KL60gf_hU
If this works for you the issue is related with the cover.
I bought the same cover and I faced same problem ,,, any solution please .
If you are rooted, you can try this xposed mod.
http://tinyurl.com/qbpjv22/MotoMagnetOff_test3.apk
I've just added an setting checkbox to wake the phone if it's ringing.
Moto G - Screen does not wake in Flip Case.
hi anish.awalkar ..have you got the solution?
Related
Hello,
I bought the 'created N7',
a 7 inch phablet that is like the ulefone u7/tronsmart ps7/luftco a onex/orientphone mega pro 7 etc..., and is sold by the factory with 4.4.2 installed
I found a bug in this product
The bug is about the bad working of the s-view window.
I link here a video where is possible to see how it should work:
http://youtu.be/lk1P9jziw64
The problem is that with the created N7 it is not possible to answer
to the calls without opening the flip cover:
when the N7 receive a call, the s-view window is not sensitive, so it
is not possible to answer
The sview with cover closed is sensitive only for a few seconds after the cover has ben closed, specifically only before the sview goes in standby (black screen)...after the standby, wakening the phone by a call or simply pressing the power button (without opening the cover) the sview seems not sensitive
These are two videos that shows the problem:
https://www.youtube.com/watch?v=EG6D...e_gdata_player
https://www.youtube.com/watch?v=-By6...e_gdata_player
This should be fixed, because is an important feature that is missing:
the phones like N7 of other brands (like ulefone u7/u69, luftco a-one
x, tronsmart ps7, orientphone mega pro 7) instead have a fully
functional s-view window
I already informed some created online sellers (kent wang, peter
yang... ) about this bug,
they told me that they will contact the engineer... but i have
not answer yet...i think they are not able to solve this problemi...
A seller told me that they send the leather case for free,
Its a gift , so i cannot ask them to fix this problem ��
Can someone help me to fix this problem?
I tried installing firmware of other device (luftco a onex 4.4.2)
But nothing has changed ...(and by the way i found that the luftco firmware
does not fit with my n7...the camera does not work with it)
Any hint?
Any suggestion?
I did some tests i found that actually the sview is sensitive also after the standby, but not enought to feel the touches through the screen...
in the settings there is an option 'increase touch sensitivity to allow the control through sview screen',
seems that this high sensitivity status is not reactivated if the cover is not opened after the phone goes to standby...
How can i fix this problem? perhaps some fix on touch drivers is needed?
Please help me!
Thank you!
Hi,
I just updated my Droud Ultra and it looks like there are missing two features:
1. in the 21.xxx sw if I approached with my hand the proximity sensor the phone shows the time/missed events. Now if I want to see the clock I have to move / to jog the phone it is not enough to go close with my palm to proximity sensor
2. in the 21.xxxx when the phone was charging a stripe/band was going up and down -- now it is missing, too (
How could I enable this features or they are turned off ?
For the first one. Yes, waving the hand over the phone no longer wakes it up. According to one of the moderators on the Moto support forum, the ability to display notifications with a wave of the hand was a bug that Moto fixed. I know..... So there is no way to reactivate it 23.3.24. Sorry.
Source:
https://forums.motorola.com/posts/fe26ceed34
Also stock messaging app no longer allows you to open the address book and multi select recipients. Hangouts is the same.
I could slap whomever decided to do this!
Touchless controls actually goes to speakerphone now when making a call if you have the setting checked, it was broken in the last update and wouldn't actually go to speakerphone even though it was checked but worked before that one. I'm so glad it works now.
Hello there, I just got myself a flip cover, and I would love to have the functionality that turns the screen on and off when you open or close the cover like on CM11S but on CM12.
Does anyone know if there's an xposed module or something like that???
Thanks in advance!!!
Affected system:
Android Lollipop 5.x.x/Marshmallow 6.x.x
Affected device(s):
All Moto G (1st, 2nd and 3rd gen) with Magnetic Flip Cover (+ All Nexus devices)
Issue:
With Flip Cover closed and being turned on "Also Vibrate for Calls" option phone vibrates only once for incoming calls
Result:
Many missed calls.
Diagnosis:
It seems to be related to the Magnetic Sensor Mechanism and Automatic Screen On/Off Feature.
This issue has also been reported to the AOSP action tracker, but no one seems to care.
There is also a workaround described, but I am not a programmer / developer.
I invite developers including @Alberto97, @squid2 to solve this issue.
I also invite @rovo89, @C3C076 to see anything can be done through Xposed Framework.
Hello there!
I have the problem since I put matte screen protector on my phone. Everytime I call/answering call screen goes black. Maybe it needs calibrating proximity sensor or something like, but I don't know how.
I would be very grateful if you could suggest me some way to fix this problem.
Thanks
Some screen protectors just mess with the proximity sensor, remove them and verify the sensors operation... If it fixes the problem, contact the manufacturer/retailer and request a refund, a screen protector designed for the device should not interfere with any sensor's operations.
There is no way to calibrate the sensor I am aware of.
Sensors Test app by Ettore Zaffaroni is a handy tool to check proximity sensor and others. It detects 3 levels of proximity, less than 1 cm, between 1 and 3 cm, beyond 3 cm on Moto G 3th. The proximity sensor on this model is right between the ear speaker and the front facing camera.
Thank you both for the answer.
The protector I'm using currently is custom cut (cause there was no other option for my phone in my region). It covers sensor and hence the problem comes. When putting on I didn't think there would form this kind of obstacle. The Clear one that I had purchased from amazon and used before was cut nicely and didn't cover sensor.
Lately I was searching some tools for calibrating and came up with an app named Proximity sensor restore/repair by Mobile Direction. As it says it only repairs the software problem not hardware. I gave it a try and for now sensor works. Though, I don't know if it will be permanent solution.
Alternative is to cut there too where proximity sensor is located, cause I don't want to remove the protector yet.
Oh no ! here it comes again! I had a long standing issue on Moto G Osprey with screen going blank when making or receiving a call . WIth AospExtended ROM 26/09 version it was resolved . In mean time I spent 1 year tried to resolve teh issue by installing stock motoroal firmwayre, proximity sensor disabling via exposed module, proximity sensor caliberation etc and nothing worked . But with 26/09 build thsi was resolved and my screen was working on 90% of calls and on 10 % dialler or call accepting option was not apearing but status bar was visible where on Andropid Nougat roms and Marshmellow Roms it was 90% of calls were made received with blank screen and then rubbing over sensor to wake up screen .
After the Alpha build 30/09 this has came back again . I have checked again on 26/09 build and issue is not there . Can anyone suggest why I am having this issue with new build or what changes been made into new build which can cause this issue ? I understand only few people have this issue and even on Lenovo forums there is no solution to it
Proximity sensor Complete solution 101%
I have also same problem and All osprey custom ROM last update has this problem.
But guys u can use cypheros 4.1.2 there is no problem with proximity sensor it's same stable as AEX 4.6
get.cypheros.co