Database Info

[Q] Samsung Galaxy ACE Hard Bricked... Please help

Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...

an exact thing happen to me.but i manage to get my pc to detect the phone by pressing power+volume up+home (i dont know what mode).odin detected my phone but the flashing stuck at setup connection..because it was not in downloading mode i guess...
same as above, help needed!
additional info: pc and odin detect phone bot not kies, on kies it keep saying connecting....and theres no display on the phone

same here wont do anything

same with me, my phone wont start even on download mode so you cannot use odin.. please help.

same case , i accidently pressed wrong phone version and my phone was 'bricked'
any help ?

Same happened here! Has anyone found a solution??
Edit: All right. Here's what I did:
1. Remove the battery from the Galaxy Ace
2. Connect the USB cable to the PC as well as the phone
3. Hold: volume down + home + power buttons all together and insert the battery while you're doing that (could be a bit tricky but it works)
4. Now you should be in download mode with "downloading" on your screen
5. Open up Odin v4.38 and flash your stock firmware (find it on samfirmware)
6. That's it! It should be fully working now (at least it did for me)
Tell me if it works for you guys!

its okay alr , i bring it to the service center it claims my motherboard spoil , it changed a new one for me

@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.

same thing happened to me.
did different methods to bring it to boot, even the two-prong diy to force to turn it on, still no go.
in the end, store replaced the device...with a bnew one of course.

Did anybody successfully revived bricked ACE??

Found expensive solution...
google "riff box samsung galaxy ace"

Samsung SGA revived
hey guys, i bricked my phone last april then the only solution to revive it is by replacing the motherboard or by using JTAG. btw JTAG support for samsung was released last May 12.

delete post
delete post

Galaxy Ace Bricket
i am also facing same situation..any update about please share
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse

It just corrupts your motherboard
So a hardware issue can't be solved from home
Only option I guess is Service Center
Hope you have warranty
ROM Manager is a tricky tool
It hard bricks your phone if you do even a step wrong !
Ps ....Im just cautioning everyone so that it doesn't happen in future to others....
Sent from my Xperia Neo V using xda premium

dimethicone2k9 said:
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
Click to expand...
Click to collapse
Hardbricked ace cost 0 .

sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
reloading tar by odin:laugh:

Galaxy sl i9003 dead, please help

so since ive rooted and flashed a few android and symbian phones, my friend gave me his samsung galaxy sl 9003 and asked me to flash it to gingerbread, i choose official rom instead of cyanogenMod. i flashed device with odin v1.82 and when the phone shoud have rebooted, it did not, so i pulled out the battery and now i have no sign of life. no booting, no recovery, no download, even the hard reset button on the back does not help. is there any way that i can get this thing working? oh, and there is no radioshack store around, so i cant make a usb jig. please help me with this, i dont have money to buy him a new galaxy s

Same issue
Please please please..
I just had the same problem. Mistakenly and so stupidly I flashed my I9003 with I9000 stock.
Now phone is totally dead. I mean no recovery no download nothing.
Please help me out.

Is there no one to help?
Tried JIGing, combination keys (in various ways mentioned), hardware reset from back..nothing is working and phone is still dead.
Only thing left to do is JTAGing. Phone is still under warranty so don't wanna do it.
Will samsung cover this issue with their warranty?
Please at least help on that. I'm totally disappointed here and helpless.

[Firmware] Unbrick & restore Galaxy Tab 3 7in SM-T210R

[Firmware] Galaxy Tab 3 7in SM-T210R
How to restore your Samsung Galaxy Tab 3 7in wifi tablet with odin and the stock firmware. Unbrick your device
Directions [NOTE] make sure your battery is fully charged before starting this process.
Download files listed to your computer
UPDATED LINK WITH ALL Firmware in one easy spot HERE
1. http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware or MK1 Firmware to fix screen flicker
2. ODIN 3.07.ZIP
3. Samsung drivers
extract the drivers and install.
extract odin 3.07 program to desktop
extract firmware to desktop
Enter download mode / odin mode on the tablet from a powered off state.
Press and hold power, home, and volume down. you will see a warning screen then press volume up to continue
Now the device is in download mode. plug in usb cable to computer and device and let the drivers install give it 3 minutes
run odin 3.07 and wait to see the com port connect.
Click on pda button in odin and find the firmware file you extracted to your desktop and select it
press start and wait for device to finish the flash and reboot.
Thats it you just restored the firmware on your device.
Link to samsung mobile firmware
http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware
How to video linked here VIDEO

Thanks for the info. Is there already a way of how to reset the flash counter ?

batman08 said:
Thanks for the info. Is there already a way of how to reset the flash counter ?
Click to expand...
Click to collapse
No sure if Triangle away app will work on this device yet. I really dont care if it shows flash counts it doesnt bother me.

Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app

meber said:
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It should restore the entire device even stock recovery

Video added to OP

hi
is the firmwere contains or supports the arabic language ?
if not how do i find a firmwere that supports arabic language
tab 3 ( sm-t210r )
thak you

i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery

Thank you
I am glad I found this I just got mine a week ago and was in a hurry to root it so I could play around and in doing so I spaced off making a backup. So again thanks your a lifesaver. Can do the updates then back it up before I root it again. You happen to know of any good roms for this tablet?

it didint work for me i get a block of yellow text and it says factory mode and alot of other stuff

my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?

tuncell said:
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
Click to expand...
Click to collapse
yes I think it would

is the latest version for the galaxy tab 3 t210r wifi only for the US the MK1 listed as unknown on http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=XAC ??
does this overwrite recovery?
if so can you still install philz recovery from http://forum.xda-developers.com/showthread.php?t=2468441 ??
also will the root method work from http://forum.xda-developers.com/showthread.php?t=2433853 ??

biggyhead said:
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Click to expand...
Click to collapse
After I rooted my Samsung Galaxy Tab 3 7" using prerooted.tar.md5, I had the same issue. The screen kept flickering and now I want to unroot to go back to the original manufacturing setting. I just flashed this firmware and it restored to the original condition except the flickering problem still exists. Please help.

unbrick my galaxy tab 3 10.1 P5200
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.

Horatio03 said:
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Click to expand...
Click to collapse
ok, here's the update, I have in fact been told it IS as a result of the firmware . . . . is there a 3rd party or download available that can be used to fix the firmware issue . ..if known please, please, please, give the link - - -thank you for your attention

screen flickers
when i restore my screen flickers and shakes and changes colors randomly

does it work for my : samsung galaxy tab 3, 7 inch SM-T210 ?

Bad firmware image
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.

samsong313 said:
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
Click to expand...
Click to collapse
Thread updated. when I made this thread the device it was on a different firmware and it must not work anymore so links in OP are updated get the firmware from samsung mobile

[Completed] Touchscreen not working due to software malfunction on Samsung galaxy ace gt s5830i

I am using Samsung galaxy ace gt s5830i. I dialed a number *#*#2664#*#* to view the lcd version. after dialing the lcd firmware version came on the screen and an update button on the middle of the screen. My phone was connected to the internet via wifi. When I pressed the update button a message came showing update failed and the touchscreen stopped working. I restarted my phone but the problem still exist. I then rebooted my phone but no response on the touch. Finally I update my mobile from gingerbread to jellybean via custom rom but still the touchscreen was not working at all. I then again install gingerbread via odin but still the same case. Please give any suggestion to solve the problem. The touch was working properly before pressing the update button, this happened due the software malfunction I think. Please anybody have the solution, then help resolving it.
*sorry for the grammatical mistakes..

XDA Visitor said:
I am using Samsung galaxy ace gt s5830i. I dialed a number *#*#2664#*#* to view the lcd version. after dialing the lcd firmware version came on the screen and an update button on the middle of the screen. My phone was connected to the internet via wifi. When I pressed the update button a message came showing update failed and the touchscreen stopped working. I restarted my phone but the problem still exist. I then rebooted my phone but no response on the touch. Finally I update my mobile from gingerbread to jellybean via custom rom but still the touchscreen was not working at all. I then again install gingerbread via odin but still the same case. Please give any suggestion to solve the problem. The touch was working properly before pressing the update button, this happened due the software malfunction I think. Please anybody have the solution, then help resolving it.
*sorry for the grammatical mistakes..
Click to expand...
Click to collapse
Hello, and welcome to XDA! You may have to reflash stock firmware through fastboot in order to get rid of this bug. I am linking you with the tutorial for restoring your phone to stock: http://forum.xda-developers.com/showthread.php?t=1840645. I am also linking you with the help forum for your device in case someone is able to offer another suggestion: http://forum.xda-developers.com/galaxy-ace/s5830i-help. You will need to register in order to post.
Good luck!

Galaxy S duos 7582 boot loop and unable to access recovery mode. help guys please

Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to hert screen with Samsung logo and phone model) with connecting to charger e or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons.
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying:

[email protected] said:
Hi Guys,
I have the Samsung galaxy S duos (7562) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to the start screen with Samsung logo and phone model) with connecting to phone or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons.
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try following this guide http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791 it should save it.

billysam said:
Try following this guide http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791 it should save it.
Click to expand...
Click to collapse
sam,
hi billy sam,
am really sorry that i have mentioned the phone model as 7562 instaed of 7582. kindly provide the link for 7582 as well let me try to do it. also today when i connected my phone to charger it shows the message that " firmware upgrade encountered an issue. please select recovery mode in kies & try again"

[email protected] said:
sam,
hi billy sam,
am really sorry that i have mentioned the phone model as 7562 instaed of 7582. kindly provide the link for 7582 as well let me try to do it. also today when i connected my phone to charger it shows the message that " firmware upgrade encountered an issue. please select recovery mode in kies & try again"
Click to expand...
Click to collapse
Well you were saved. always make sure about the device model before flashing. anyways it's the wrong thread here. its not a big issue and don't need very complex method. just download the stock firmware you want from sammobile and flash it through odin.