Database Info

[Q] Samsung Kies Problem

Hi Guys,
I followed the process from this link in the XDA forum to get my 3BR mode working.. its working perfectly, I am able to access the recovery mode > which allowed me to apply the voodoo lag fix.
I was quite happy until I plugged my phone back into KIES.. In KIES when I click firmware upgrade my phone immediately fails saying the servers are unavailable or I don't have a internet connection, however I do.
I have tried unistalling and reinstalling to no avail. I would love to get this working before froyo 2.2 comes out so I can upgrade via KIES.
This is my phone about screen
2.6.29 curio carton #Voodoo_lagfix_3.0
Build Number : ECLAIR.DTJG4
Please help me
Cheers
Milan

[Q] Samsung Galaxy ACE Hard Bricked... Please help

Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...

an exact thing happen to me.but i manage to get my pc to detect the phone by pressing power+volume up+home (i dont know what mode).odin detected my phone but the flashing stuck at setup connection..because it was not in downloading mode i guess...
same as above, help needed!
additional info: pc and odin detect phone bot not kies, on kies it keep saying connecting....and theres no display on the phone

same here wont do anything

same with me, my phone wont start even on download mode so you cannot use odin.. please help.

same case , i accidently pressed wrong phone version and my phone was 'bricked'
any help ?

Same happened here! Has anyone found a solution??
Edit: All right. Here's what I did:
1. Remove the battery from the Galaxy Ace
2. Connect the USB cable to the PC as well as the phone
3. Hold: volume down + home + power buttons all together and insert the battery while you're doing that (could be a bit tricky but it works)
4. Now you should be in download mode with "downloading" on your screen
5. Open up Odin v4.38 and flash your stock firmware (find it on samfirmware)
6. That's it! It should be fully working now (at least it did for me)
Tell me if it works for you guys!

its okay alr , i bring it to the service center it claims my motherboard spoil , it changed a new one for me

@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.

same thing happened to me.
did different methods to bring it to boot, even the two-prong diy to force to turn it on, still no go.
in the end, store replaced the device...with a bnew one of course.

Did anybody successfully revived bricked ACE??

Found expensive solution...
google "riff box samsung galaxy ace"

Samsung SGA revived
hey guys, i bricked my phone last april then the only solution to revive it is by replacing the motherboard or by using JTAG. btw JTAG support for samsung was released last May 12.

delete post
delete post

Galaxy Ace Bricket
i am also facing same situation..any update about please share
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse

It just corrupts your motherboard
So a hardware issue can't be solved from home
Only option I guess is Service Center
Hope you have warranty
ROM Manager is a tricky tool
It hard bricks your phone if you do even a step wrong !
Ps ....Im just cautioning everyone so that it doesn't happen in future to others....
Sent from my Xperia Neo V using xda premium

dimethicone2k9 said:
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
Click to expand...
Click to collapse
Hardbricked ace cost 0 .

sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
reloading tar by odin:laugh:

I think I bricked my son's tablet!

Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.

http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.

No luck so far, is there no way to get past this screen?

Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?

Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD

Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.

One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium

Sweeeet ! Well played :good::good::good::good:

Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...

I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.

Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium

I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!

Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor

Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.

[Q] After update device no longer boots up

Hi
yesterday i update the official new version of 5.0.2 on my Galaxy S6.
Then i charged my s6, at some point I wanted to see how much he charged i press the home button NOTHING happened
i try to reboot NOTHING odin it does not recognize the device .
The battery is full so that is not the problem what can i do.
Please help me.
SORRY FOR MY ENGLISH

gfxfido said:
Hi
yesterday i update the official new version of 5.0.2 on my Galaxy S6.
Then i charged my s6, at some point I wanted to see how much he charged i press the home button NOTHING happened
i try to reboot NOTHING odin it does not recognize the device .
The battery is full so that is not the problem what can i do.
Please help me.
SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Can you reboot the phone or just the screen is stucking now?
http://forum.xda-developers.com/galaxy-s6/general/videos-ultimate-root-recovery-t3072135
You got to reboot to get in the bootloader menu to let odin recognize it.

hi
i try it but it dosent work i talk to samsung support and they told me that i send the device to samsung to repair it so i wait for a reply form samsung
thx for help

[Completed] Samsung galaxy s II stuck at samsung logo

Yesterday I Installed android 5.1 on my Samsung Galaxy S II with help of a tutorial video( The ROM I installed CM 12.1 Android 5.1.1) it all worked fine downloaded some apps like Pokemon go and it still worked fine until a update of cyanogenmod came up so I installed it restarted the phone, then the wifi connection started to do weird so I went to updates to see if there was an other update which I might have missed. There was one so I clicked it downloaded the update then I saw it was an old update. When the update rebooted the phone it didn't wanted to start. I think I downloaded an old update over a new update. I coulnd't get past the samsung logo cuz the screen would turn black . So I readed that I should reflash stock firmware via Odin which I did but now my phone keeps stuck at the samsung logo.
When I started the phone I did get the start screen
Samsung Galaxy S II
GT-I9100
then the samsung logo pops up
the intro music plays and that's it then it keeps repeating this steps all the time
also the recovery mode button combination doesn't seem to work so I cant get in recovery mode.
When I try to charge the phone
the screen stucks on the battery loading image
Hopefully someone has any ideas how to fix this problem and get my phone on and working again.

XDA Visitor said:
Yesterday I Installed android 5.1 on my Samsung Galaxy S II with help of a tutorial video( The ROM I installed CM 12.1 Android 5.1.1) it all worked fine downloaded some apps like Pokemon go and it still worked fine until a update of cyanogenmod came up so I installed it restarted the phone, then the wifi connection started to do weird so I went to updates to see if there was an other update which I might have missed. There was one so I clicked it downloaded the update then I saw it was an old update. When the update rebooted the phone it didn't wanted to start. I think I downloaded an old update over a new update. I coulnd't get past the samsung logo cuz the screen would turn black . So I readed that I should reflash stock firmware via Odin which I did but now my phone keeps stuck at the samsung logo.
When I started the phone I did get the start screen
Samsung Galaxy S II
GT-I9100
then the samsung logo pops up
the intro music plays and that's it then it keeps repeating this steps all the time
also the recovery mode button combination doesn't seem to work so I cant get in recovery mode.
When I try to charge the phone
the screen stucks on the battery loading image
Hopefully someone has any ideas how to fix this problem and get my phone on and working again.
Click to expand...
Click to collapse
Hi and welcome to XDA.
Please create an account so you can have full posting privileges.
Then you can post post in your device section:
Galaxy S II Q&A, Help & Troubleshooting
Experts there may be able to help you.
Good luck