can anyone please help me as my HTC* E8 screen is damaged. Its lcd is fine touch is also working normally but outer layer is damaged.
what should I purchased whole kit or only front outer layer can you kindly help me.
Hello,
my display has a crack after a fall. So I ordered a display for $ 42 at Aliexpress . A colleague wanted to replace , he works for a repair service . Unfortunately, he stopped because the E8 is very difficult to repair . Many layers, which are glued together. And it all depends on the rear of the display. A repair from an online dealer in Germany would cost about more then 200 euros, and that's too expensive. So I rather live with it. And yes, you need both.
My htc e8 screen work, but in left i got a gap. I think that becaus the glue does not stick perfectly. How must i do ?
muhammadakbarpp said:
My htc e8 screen work, but in left i got a gap. I think that becaus the glue does not stick perfectly. How must i do ?
Click to expand...
Click to collapse
just go to nearest service centre
btw, how come you got that gap? falling to the floor?
There are professionals in after market mobile repair industry who will glue HTC`s E8 glass over display. This process can be possible but you need to find that artists in your area.
Related
Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
ferrari373 said:
Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
Click to expand...
Click to collapse
I have replaced several screens on Touch Diamonds, however the LCD matrix appears to actually be stuck onto the digitiser and the LCD itself is very very fragile. I usually replace the whole unit (LCD screen and digitiser) because it is much easier. You can purchase these from various sellers in Hong Kong on Ebay.
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
ferrari373 said:
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
Click to expand...
Click to collapse
My recommendation would be to re-sell the touch screen and buy yourself a complete LCD & digitiser module. It is much much easier to do. In terms of taking the phone apart, it is fairly straight forward. Be careful with the small co-axial cables inside though, because they are easily damaged and difficult to obtain without replacing the antenna board. Re-connecting the ribbon cables can also be a bit fiddly.
The LCD and digitiser are glued into the front of the phone. You will need to disassemble the phone and then very carefully using a plastic flat blade, ease the LCD out of the front of the phone housing. It will come out with a little bit of care. There should be enough glue remaining in the housing to re-seat the replacement unit and hold it in place.
If you google you should be able to find the HTC Diamond service manual which tells you how to take the phone apart and re-assemble it. I have a copy, so if you can't track it down, PM and I will e-mail it to you.
Andy
Hi,
To barncourt, how is the build quality of those honk kong made screens?
also a lot of the screen+digitizer that i have seen on ebay all have the front facing camera. would it be possible to use that screen even though my diamond is the one that has no front facing camera?
Of course, it is just a hole
p.brazauskas said:
Hi,
To barncourt, how is the build quality of those honk kong made screens?
Click to expand...
Click to collapse
Okay, but I tend to buy from the same seller. Not had any particular problems.
barncourt said:
Okay, but I tend to buy from the same seller. Not had any particular problems.
Click to expand...
Click to collapse
Hi I wanna know can you share your supplier adress with us ?
I'm looking for a LCD+digitizer and what I see is not something giving confidence...
So if you can give us some real-tested place to start...
Also I've dismantle the phone but it's quite hard to take the screen+digitizer away...
it's seems completely fixed with the housing does some one got s pics or guide on how to dismantle and replace the screen
(The HTC service guide you can see here and there just don't deal with the screen.)
and when I started just broke my screen (which was already broken anyway so...)
http://www.fuelip.com/howto/diamondlcd/diamondlcd.htm
I followed that guide and replaced my screen. I have one last problem though - I can't fit back my power button. It's made of two parts the black plastic cover and the transparent rubber. How do you stick them together? I'ts funny that I took my whole diamond apart with all the cables and boards and now I can not figure out how to fix a silly button
i recently dropped the phone and am thinking whether it is worth it or not to buy new housing. i have a touch diamond nam 3g with rubber back and no front facing camera. can anyone give me links to where i can find housing for my model. i saw a lot on ebay but those look like housings for the euro and asian model with glossy back and front facing camera. also if i want to switch off the front screen because of scratches, should i buy a whole new lcd or should i just buy a digitizer cuz i heard that it is hard to change just the digitizer.
anybody know anything about this?
If you need original housing it will cost you.
I bought from this company recently (EU)
http://www.mytrendyphone.com/shop/htc-touch-pro-13838p.html - £15.75
http://www.mytrendyphone.com/shop/htc-touch-diamond-11870p.html - £35.29
http://www.mytrendyphone.com/shop/htc-touch-diamond-13679p.html - £19.41
Total £70.45 + shipping
Note: The shipping is low from this company.
But your Diamond will be like brand new.
do they ship to the US though? also i don't see the actual front housing in there. i see that you bought a digitizer too. how hard is it to replace the digitizer?
From what I have seen, the phone has to be completely disassembled to change the digitizer, doesn't look like an easy task.
yeah but what i mean is, is it easy to detach the digitizer from the lcd screen?
kevinf1990 said:
yeah but what i mean is, is it easy to detach the digitizer from the lcd screen?
Click to expand...
Click to collapse
i have asian non 3g htc touch diamond white without front facing camera. i just bought it two days back and from what i have seen nd heard, it's very difficult to replace digitizer or screen alone, if u cud get 'em get a screen wid a digitizer nd if u wanna save some money purrchase the housing with digitizer alone. but be very careful while removing the digitizr from lcd. they are sort of glued together but when u remove it, u shud have enough gule left to paste it into new digitizer.
nd sellers from hong kong are quite friendly. just ask a question to them on ebay about ur requirement and m quite sure they can make available to you whateva u want.
PS: i got it about two weeks back nd not two days.
where did you find a digitizer that doesn't have the front camera hole though
I broke my LCD of milestone XT720 yeaserday..
Anyone knows the link to dissambling og Milestone XT720???
And also where can I buy LCD.. I am in India.
New from authorized service center will cost u 3,500rs. U may try @ Manish market in Mumbai. U will surely get the LCD. But not sure if it will be original. Motorola service center gives u one month warranty for it.
aks_cool6 said:
New from authorized service center will cost u 3,500rs. U may try @ Manish market in Mumbai. U will surely get the LCD. But not sure if it will be original. Motorola service center gives u one month warranty for it.
Click to expand...
Click to collapse
I bought the LCD from ebay today morning for Rs. 1300..
[link] http://www.ebay.com/itm/LCD-Screen-...749632?pt=PDA_Accessories&hash=item4ab0521680 [/link]
but i cant find any tutorial how to replace it
Its a link for US ebay so did u got it imported??
i just bought it from there.. some of sellers ship product overseas..
It's pretty easy to disassemble, if you've repaired other phones.
From the back, holding it with the speaker grille down you have:
Top left rubber cap hiding one screw.
Top right under 8.0 xenon sticker one screw.
Middle over battery two screws, not hidden.
Bottom left and right, under speaker grille another two.
Now simply spread the blue from the chrome with a PLASTIC breaker.
You often get them free with new screens.
After that, there's ribbon cables and some sticky tape that need to be extremely carefully removed, especially the micro antennas.
A new touch/digitizer from ebay should include the chrome frame!
Very important, as they're glued and not double sided taped like other phones.
LCD is separate from the digitizer, and if that's broken you need to buy two parts obviosly.
My phone recently received a direct impact on the screen.. I tink the lcd screen got destroyed!
The gorilla glass stood up to the impact. But the display beneath the glass turned black and only showed streaks of white light when turned on.. everything else's still working find though! e.g. multitouch, launching apps, etc.. can even answer phone call cause it's just a swipe..
is this a spoiled LCD screen of my phone as OP mentioned?
Good evening guys, I wanted to ask, any one knows the average price for an Original LCD screen and its Digitizer together?
Im seeing prices from 45~120$ but i wanted to ask if anyone have ever got any before, plz would help me to find the best for my friend Sensation thx.
I called HTC they said 180 and I think its worth it through them rather than a phone repair shop. Which I wish i did....
So I broke my screen. I looked up some digitizers but I dont know what I should get. Could someone please suggest one to buy? I have a T-Mobile USA sensation. Does it really matter which part I buy or will any digitizer work?
I'd recommend you just send it to HTC. I had my digitizer replaced by a computer repair shop that said they could replace my digitizer and I had it done for 70 bucks. After they replaced it my digitizer would barely respond to the point that I couldn't even use it. They replaced it because they had a 30 day warranty but even that replacement was just as bad. I had the digitizer replaced one more time and it was better but still not the same. I just couldn't use it without getting frustrated. I ended up just exchanging my phone through my carrier but I wish I avoided the hassle in the first place....
I replaced both the LCD and the Digitizer just last week on my Sensation. I had the the touch screen issues you guys are talking about, but as soon as I upgraded the radio the problems went away.
Here's a post with the firmware update. You have to be rooted and have your bootloader unlocked.
http://forum.xda-developers.com/showthread.php?t=1385439
Well can you please PM or post which one you ended up buying
Does anybody has got the link to replacement guide in relation to original lcd + digitizer? On yt I just see how to replace only digitizer but I want to buy an original set (lcd + digit) and replace it. I'm afraid of getting the dust after changing just digitizer.
I bought digitalizer for 30euro and followed you tube video to change it my self... The repair shop asked 180euro for the repair (300 new phone) so I gambled and it was worth it.
Good thing on sensation and htc phones is you can replace the digitalizer alone compared to example Samsung where u need to buy and replace lcd screen same time. Costs loots more.
Sensation XE. Bricked kernel. ViperS ROM. Powered by Mugen battery.
Yeah, but while replacing only a digitizer it's very easy to get dust under it when man doesn't have laboratory conditions.. And then what? Starting all from the beginning? Some time ago I saw on ebay a digitizer + lcd for htc sensation for about 50$ but I just don't know how to replace it
Actually when u have working digitalizer connected u don't need to diassemble. Ucan just pull the screen out with knife from the frame. (because flat cable u need to put phone to pieces) I left some dust under first but then saw this trick on YouTube and used it to clean under screen with micro dust towel.. Anyway even with the minor dust its lot better than broken screen.
Sensation XE. Bricked kernel. ViperS ROM. Powered by Mugen battery.
So no one knows how to assemble digitizer + lcd?
joohtz said:
So no one knows how to assemble digitizer + lcd?
Click to expand...
Click to collapse
You tube is your friend.
On you tube are only videos that show how to replace just digitizer or how to DISASSEMBLE lcd + digitizer. I'm looking for info how to ASSEMBLE digitizer + lcd set.
just seen a pair on ebay for $55 :good:
ebay item number: 130646942239
From where should I know which type (A or B) I need to buy? Another problem - how to ASSEMBLE it?
Does anybody know if every lcd + digitizer works with normal sensation? I mean if there exist different versions etc. I have sensation from Europe. Im going to buy the whole screen so I need to know it. Additional question, does lcd + digit from sensation xe works with normal senny? Thnx in advance.
up
I bought my digitizer on ebay for ~ 35$ and changed it using youtube videos. Everything works perfectly.
Pretty easy
HI guys,
i repair alot of phones in my spare time and the sensation is pretty easy you can also get a foam seal for the digitizer to prevent dust
ar3na2012 said:
HI guys,
i repair alot of phones in my spare time and the sensation is pretty easy you can also get a foam seal for the digitizer to prevent dust
Click to expand...
Click to collapse
I just repair my sensation with spare parts from ebay and it works great.
Unfortunately I crashed display on moto x play...so if anybody now trusted site to buy new one....tnx
Anyone found a display replacement that includes the front cover? Without it, it should be nearly impossible, am I right?
Gesendet von meinem XT1562 mit Tapatalk
I haven't seen any.
I tried combining the components and failed. Broke the circuitry in the LCD when trying to mount the frame...
I asked Motorola what i should do when i dropped my phone and the glas got broken. They told i should send it to their repair service, it was datrepair in Germany maybe its another in other countries. They Arranged everything for me and i paid 120€ for the replacement, just the glass maybe touch but idk, screen was ok when i was sending it in. They even took care of shipping without any cost for me.
Normaly i repair devices by myselfe but in fact the phone was only 1 Month old i refused to it.
If you have a heat gun (or hair dryer) and a set of torx screwdrivers, you should be able to fix it at home. If something is tight, never force it. Use plastic tools to pry open the case, usually comes together with the screwdriver set if you buy them online
pijes said:
If you have a heat gun (or hair dryer) and a set of torx screwdrivers, you should be able to fix it at home. If something is tight, never force it. Use plastic tools to pry open the case, usually comes together with the screwdriver set if you buy them online
Click to expand...
Click to collapse
For that, you would need the lcd including the frame which is nicht available yet...
So atm nearly impossible.
I managed to get some tiny cracks on the edge near the front camera (it fell onto metal from my jacket, i was bending over). Thankfully it's not the touch area, but i now somehow understand why so many people have cracked phones. It happens so quickly. And i was treating it like a raw eggshell, too.
I dropped mine as I was getting out of the car.It cost me R1500 (R is for South African Rand) to replace the screen.The guys who repaired it had to crack the plastic frame to get the screen out .They used glue to keep the new screen in place.I dont think they knew what they were doing,but it was the only repair center that was in the same province as me.
http://www.ebay.com/itm/LCD-Screen-...Assembly-For-Moto-X-Play-XT1562-/351672097858
Finally a full assembly, actually think I am going to try AGAIN. maybe I will make a video on it
There is also a full assembly available on aliexpress. http://www.aliexpress.com/item/5-5-...-1&btsid=5347749e-d1d5-4871-a4c2-dafc85fd700d
I should have checked ebay prior as that one ships from the states and would have got here way quicker.
Jeklund said:
There is also a full assembly available on aliexpress. http://www.aliexpress.com/item/5-5-...-1&btsid=5347749e-d1d5-4871-a4c2-dafc85fd700d
I should have checked ebay prior as that one ships from the states and would have got here way quicker.
Click to expand...
Click to collapse
NewAndreas said:
http://www.ebay.com/itm/LCD-Screen-...Assembly-For-Moto-X-Play-XT1562-/351672097858
Finally a full assembly, actually think I am going to try AGAIN. maybe I will make a video on it
Click to expand...
Click to collapse
Yeah, please make a video it'll help many.
https://www.youtube.com/watch?v=5_yzMPWCQOM This video shows the whole process with a complete display assembly. Its incredibly more difficult if you get the screen without the frame as the screen is affixed to the frame with some sort of adhesive foam.
I also broke my screen and ordered a replacement. Unfortunately I broke the frame in the process of removing the old screen.
Luckily I got my hands on a replacement frame and some 3M 2 milimeters adhesive strips. Praying for everything to work out put together..
Crizzl said:
I also broke my screen and ordered a replacement. Unfortunately I broke the frame in the process of removing the old screen.
Luckily I got my hands on a replacement frame and some 3M 2 milimeters adhesive strips. Praying for everything to work out put together..
Click to expand...
Click to collapse
Best of luck, if you can document the process as there isn't much info out on screen replacements where you affix a new frame to a screen. My frame broke when I dropped my phone which is why I just got the whole unit. Cost me about $62 CAD shipped for the whole unit.
Has anyone here tried a replacement? Any tips?
So is it possible to change just the glass without the whole display unit?
I'm talking bout this part: Outer Screen Glass Replacement
apokolok said:
So is it possible to change just the glass without the whole display unit?
I'm talking bout this part: Outer Screen Glass Replacement
Click to expand...
Click to collapse
So, I tried for myself with my old display after I got a replacement new display including a new frame.
It is absolutely impossible to separate the front glass from the digitizer and display without destroying all three.
I think even a professional wouldn't be able to do it. Display and digitizer are very flexible while the screen is glued really really good to them
I heated it up to no avail. Maybe some glue remover would have helped, but I don't think it would get between the glass and the digitizer.
These phones are just not build to be repared, they are build to be thrown away.
Exchanging the new frame including display was no easy job too, but it can be done.
Be sure to have a high quality Torx T3 screwdriver or bit, the cheap china ones will do nothing but destroy the tiny screws.