Database Info

screen replacement

Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!

ferrari373 said:
Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
Click to expand...
Click to collapse
I have replaced several screens on Touch Diamonds, however the LCD matrix appears to actually be stuck onto the digitiser and the LCD itself is very very fragile. I usually replace the whole unit (LCD screen and digitiser) because it is much easier. You can purchase these from various sellers in Hong Kong on Ebay.

I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???

ferrari373 said:
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
Click to expand...
Click to collapse
My recommendation would be to re-sell the touch screen and buy yourself a complete LCD & digitiser module. It is much much easier to do. In terms of taking the phone apart, it is fairly straight forward. Be careful with the small co-axial cables inside though, because they are easily damaged and difficult to obtain without replacing the antenna board. Re-connecting the ribbon cables can also be a bit fiddly.
The LCD and digitiser are glued into the front of the phone. You will need to disassemble the phone and then very carefully using a plastic flat blade, ease the LCD out of the front of the phone housing. It will come out with a little bit of care. There should be enough glue remaining in the housing to re-seat the replacement unit and hold it in place.
If you google you should be able to find the HTC Diamond service manual which tells you how to take the phone apart and re-assemble it. I have a copy, so if you can't track it down, PM and I will e-mail it to you.
Andy

Hi,
To barncourt, how is the build quality of those honk kong made screens?

also a lot of the screen+digitizer that i have seen on ebay all have the front facing camera. would it be possible to use that screen even though my diamond is the one that has no front facing camera?

Of course, it is just a hole

p.brazauskas said:
Hi,
To barncourt, how is the build quality of those honk kong made screens?
Click to expand...
Click to collapse
Okay, but I tend to buy from the same seller. Not had any particular problems.

barncourt said:
Okay, but I tend to buy from the same seller. Not had any particular problems.
Click to expand...
Click to collapse
Hi I wanna know can you share your supplier adress with us ?
I'm looking for a LCD+digitizer and what I see is not something giving confidence...
So if you can give us some real-tested place to start...
Also I've dismantle the phone but it's quite hard to take the screen+digitizer away...
it's seems completely fixed with the housing does some one got s pics or guide on how to dismantle and replace the screen
(The HTC service guide you can see here and there just don't deal with the screen.)
and when I started just broke my screen (which was already broken anyway so...)

http://www.fuelip.com/howto/diamondlcd/diamondlcd.htm

I followed that guide and replaced my screen. I have one last problem though - I can't fit back my power button. It's made of two parts the black plastic cover and the transparent rubber. How do you stick them together? I'ts funny that I took my whole diamond apart with all the cables and boards and now I can not figure out how to fix a silly button

I sat on my Fuze :(

Hi all,
I sat on my Fuze, short and simple. There is now a weird crack on the screen. I am very familiar with what a broken LCD looks like, there is no LCD "liquid" oozing all over the place, and the picture is not distorted in any way. It looks like some kind of lens INSIDE might be broken, and I think it's the digitizer. The cracks stop once they get to the dark grey at&t/HTC border around the screen, even though I hit very close to it, so whatever I cracked is under the top lens/protector.
Also, I read online (albeit at a cell phone repair website) that you can't replace the digitizer without ruining the LCD. Is there any merit to this, or are they just trying to convince people to pay their obscene $149 to replace a $30 part?
So I guess I have two questions:
Did I break the digitizer, the topmost lens, or somehow the LCD glass without damaging the LCD itself?
How hard is this to replace?
Pics:
EDIT: I ordered this on April 17th. Fat chance AT&T will do anything about it, right?

That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....

wxy117 said:
That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....
Click to expand...
Click to collapse
If I'm not mistaken (and I might be), all this should take is removing the two small phillips head screws on the back of the screen that show when the phone is slid open. I landed on this thing while it was open, and drove my knee right into the screen, I'm surprised I didn't break anything else.

There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5

wxy117 said:
There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5
Click to expand...
Click to collapse
So we do have to take the whole damn thing apart?
Does anyone have any luck with AT&T replacing things that are clearly accidental damage? With all the horror stories I hear about refurbished phones and the chance that they might send me one, I'd actually rather take my chances at fixing this. I've taken apart a ton of phones and fixed them before, and worked at a cell phone repair shop for a few months. I still have most of my tools lying around, including all the screw drivers I'd need to open this.
I was able to find an HTC service manual that doesn't really explain how to replace the digitizer. It does describe how to get it in two pieces, but I wouldn't know where to go from there.

I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.

wxy117 said:
I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.
Click to expand...
Click to collapse
Found a good complete disassembly guide in Russian, why does the screen have to be the LAST thing to come out? I am now looking to buy an LCD/digitizer combo, but I can only find the one from Brando that is made for regular HTC Touch Pros, and not the Fuze (has a camera cutout instead of the AT&T logo).
If I end up having to replace the LCD I'd much rather break it trying to save $50 than just toss it. Is it really that hard to separate the digitizer from the LCD?
http://translate.google.com/transla...ka/htc-touch-pro/&sl=ru&tl=en&history_state0=

has anyone had success separating the Digitizer and the LCD screen?

wxy117 said:
has anyone had success separating the Digitizer and the LCD screen?
Click to expand...
Click to collapse
Well, we'll find out. I ordered both an AT&T Fuze digitizer by itself as well as an LCD with a digitizer attached. I'm just going to go ahead and replace everything with the combination unit and see if I can replace my broken digitizer without breaking my LCD in my free time. If it works, I have a spare or I can sell it

be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....

wxy117 said:
be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....
Click to expand...
Click to collapse
Hopefully I'll get it right, I made sure to order an AT&T Fuze digitizer that made it clear it wasn't for use with Sprint Touch Pros or Touch Pros with front facing camera.
The LCD+digitizer I ordered though may very well show up as any of the above, if they're not already attached I'm going to use the AT&T Fuze digitizer on the new LCD, and try and make a new working combo from my old LCD to resell. I'll make a detailed step by step with photos as well.

Don't forget to read this

They just sent out my new one today.... So anyone that needs a digitizer for the Fuze by Sprint hit me up.... They told me to keep it so now I have an extra digitizer that doesn't work for my phone...

I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!

pisqle said:
I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!
Click to expand...
Click to collapse
Thank you for some rather broken, but very helpful advice. Kinda sucks that I'm really happy since I don't have to worry about removing any adhesive, but now I have to sit here and solder flex cables. I shoulda bought a spare one
Do they ship these parts on pigeons from Hong Kong?

To anyone counting on being able to separate the LCD from the digitizer, DON'T. There is absolutely no way to separate them without destroying either or both. Also, take extreme caution when peeling up the flex cable, it is very easy to tear (I tore mine).
So my net cost, 80 + 50, LCD/Digitizer and Flex Cable = $130 vs. sending it to HTC $150. I advise anyone to just pay them rather than take this thing apart.

from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*

wxy117 said:
from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*
Click to expand...
Click to collapse
Fact of the matter is when people say this is a delicate phone to take apart, they mean it. I worked at a cell phone repair store for a few weeks, and learned how to take apart damn near anything (thank God this was before the iPhone existed). Not only are both flex cables in this phone taped down in 100 different places, making them very easy to tear while removing the tape, the adhesive used between the LCD and digitizer is STRONG. If you really wanted to separate them, you might have some luck with a straight edge and maybe an hour. Good luck, I'll let you all know how this turns out once I have my new flex cable, since I conveniently tore the volume buttons off the original.

I just got my screen today so we're gonna see some time next week how we do on this screen replacement....I'll let you know how it goes....

So far no luck with my digitizer. Has anyone had any luck just changing out the digitizer yet? The guy that was suppose to do mine is backing out because he doesn't want to risk cracking my LCD. I don't blame him thats the reason I didn't do it. sheik124 what are you doing with your damaged fuze? Are you sending it to HTC for repairs?

galaxy s touch screen broken

hey
today my sgs fell out of my car and the screen digitizer is broken just see the photos
do you know any site where i can get in original digitizer???
Dank u

Look in my thread and you find your answer. I bought my digitizer from here: http://cgi.ebay.com/Digitizer-LCD-Display-Screen-f-Samsung-Galaxy-S-i9000-/120595111860?cmd=ViewItem&pt=PDA_Accessories&hash=item1c14075fb4

thank u man
i will check this digitizer immediately could you say how long do you take in get it home ??
and how was the quality sorry for make in new thread i just was looking here but didn't find nothing about the broken screen

yeah, just do it yourself

Same Problem
I had the same experience my phone fell from hands from 3ft height on the ground and it developed crack not as many as yours, one single crack across the face. I just wanna know has your digitizer arrived .and when your screen cracked was it working normally ,because mine is working all right just the crack is there.

U have to pay ~50 .. ~60$

Replacing your own screen... you guys are pretty amazing.

hey i just orden mine in about 10 working day i will get it and you have to orden the full combo cuz the digitizer dont come alone for the moment
LCD and Digitizer Assembly Combo for Samsung i9000 Galaxy S
if you keep this thread you will get bester experience
http://forum.xda-developers.com/showthread.php?t=745262

I just noticed that cnn.cn now has the SGS digitizer on sale.

repairs
I will fix any broken galaxy s screen for £120 or buy the broken phone off you for £150.
The Part is preety much the whole phone you only save the mainboard and backcase.
the vib motor speaker all that sort of stuff is part of the screen.
So if you are buying just the glass or screen of ebay they are fake parts are void the warranty, also the quality will be very different.

ronalgps said:
hey
today my sgs fell out of my car and the screen digitizer is broken just see the photos
do you know any site where i can get in original digitizer???
Dank u
Click to expand...
Click to collapse
My screen is broken to, but the LCD is not. The phone works in 100%, even touch, but the glass is broken. I am not sure, is the digitizer everything that I need or do I have to buy LCD+digitizer to repair it.

tvrtkoq said:
My screen is broken to, but the LCD is not. The phone works in 100%, even touch, but the glass is broken. I am not sure, is the digitizer everything that I need or do I have to buy LCD+digitizer to repair it.
Click to expand...
Click to collapse
Same question.
Sorry for the ress, but didn't find anything saying about just the glass broken.

tvrtkoq said:
My screen is broken to, but the LCD is not. The phone works in 100%, even touch, but the glass is broken. I am not sure, is the digitizer everything that I need or do I have to buy LCD+digitizer to repair it.
Click to expand...
Click to collapse
They come as 1 part, so you'll need to replace both.

[Q]Dissassembling Guide for XT720?

I broke my LCD of milestone XT720 yeaserday..
Anyone knows the link to dissambling og Milestone XT720???
And also where can I buy LCD.. I am in India.

New from authorized service center will cost u 3,500rs. U may try @ Manish market in Mumbai. U will surely get the LCD. But not sure if it will be original. Motorola service center gives u one month warranty for it.

aks_cool6 said:
New from authorized service center will cost u 3,500rs. U may try @ Manish market in Mumbai. U will surely get the LCD. But not sure if it will be original. Motorola service center gives u one month warranty for it.
Click to expand...
Click to collapse
I bought the LCD from ebay today morning for Rs. 1300..
[link] http://www.ebay.com/itm/LCD-Screen-...749632?pt=PDA_Accessories&hash=item4ab0521680 [/link]
but i cant find any tutorial how to replace it

Its a link for US ebay so did u got it imported??

i just bought it from there.. some of sellers ship product overseas..

It's pretty easy to disassemble, if you've repaired other phones.
From the back, holding it with the speaker grille down you have:
Top left rubber cap hiding one screw.
Top right under 8.0 xenon sticker one screw.
Middle over battery two screws, not hidden.
Bottom left and right, under speaker grille another two.
Now simply spread the blue from the chrome with a PLASTIC breaker.
You often get them free with new screens.
After that, there's ribbon cables and some sticky tape that need to be extremely carefully removed, especially the micro antennas.
A new touch/digitizer from ebay should include the chrome frame!
Very important, as they're glued and not double sided taped like other phones.
LCD is separate from the digitizer, and if that's broken you need to buy two parts obviosly.

My phone recently received a direct impact on the screen.. I tink the lcd screen got destroyed!
The gorilla glass stood up to the impact. But the display beneath the glass turned black and only showed streaks of white light when turned on.. everything else's still working find though! e.g. multitouch, launching apps, etc.. can even answer phone call cause it's just a swipe..
is this a spoiled LCD screen of my phone as OP mentioned?

LCD Screen & Digitizer assembly

Good evening guys, I wanted to ask, any one knows the average price for an Original LCD screen and its Digitizer together?
Im seeing prices from 45~120$ but i wanted to ask if anyone have ever got any before, plz would help me to find the best for my friend Sensation thx.

I called HTC they said 180 and I think its worth it through them rather than a phone repair shop. Which I wish i did....

So I broke my screen. I looked up some digitizers but I dont know what I should get. Could someone please suggest one to buy? I have a T-Mobile USA sensation. Does it really matter which part I buy or will any digitizer work?

I'd recommend you just send it to HTC. I had my digitizer replaced by a computer repair shop that said they could replace my digitizer and I had it done for 70 bucks. After they replaced it my digitizer would barely respond to the point that I couldn't even use it. They replaced it because they had a 30 day warranty but even that replacement was just as bad. I had the digitizer replaced one more time and it was better but still not the same. I just couldn't use it without getting frustrated. I ended up just exchanging my phone through my carrier but I wish I avoided the hassle in the first place....

I replaced both the LCD and the Digitizer just last week on my Sensation. I had the the touch screen issues you guys are talking about, but as soon as I upgraded the radio the problems went away.
Here's a post with the firmware update. You have to be rooted and have your bootloader unlocked.
http://forum.xda-developers.com/showthread.php?t=1385439

Well can you please PM or post which one you ended up buying

Does anybody has got the link to replacement guide in relation to original lcd + digitizer? On yt I just see how to replace only digitizer but I want to buy an original set (lcd + digit) and replace it. I'm afraid of getting the dust after changing just digitizer.

I bought digitalizer for 30euro and followed you tube video to change it my self... The repair shop asked 180euro for the repair (300 new phone) so I gambled and it was worth it.
Good thing on sensation and htc phones is you can replace the digitalizer alone compared to example Samsung where u need to buy and replace lcd screen same time. Costs loots more.
Sensation XE. Bricked kernel. ViperS ROM. Powered by Mugen battery.

Yeah, but while replacing only a digitizer it's very easy to get dust under it when man doesn't have laboratory conditions.. And then what? Starting all from the beginning? Some time ago I saw on ebay a digitizer + lcd for htc sensation for about 50$ but I just don't know how to replace it

Actually when u have working digitalizer connected u don't need to diassemble. Ucan just pull the screen out with knife from the frame. (because flat cable u need to put phone to pieces) I left some dust under first but then saw this trick on YouTube and used it to clean under screen with micro dust towel.. Anyway even with the minor dust its lot better than broken screen.
Sensation XE. Bricked kernel. ViperS ROM. Powered by Mugen battery.

So no one knows how to assemble digitizer + lcd?

joohtz said:
So no one knows how to assemble digitizer + lcd?
Click to expand...
Click to collapse
You tube is your friend.

On you tube are only videos that show how to replace just digitizer or how to DISASSEMBLE lcd + digitizer. I'm looking for info how to ASSEMBLE digitizer + lcd set.

just seen a pair on ebay for $55 :good:
ebay item number: 130646942239

From where should I know which type (A or B) I need to buy? Another problem - how to ASSEMBLE it?

Does anybody know if every lcd + digitizer works with normal sensation? I mean if there exist different versions etc. I have sensation from Europe. Im going to buy the whole screen so I need to know it. Additional question, does lcd + digit from sensation xe works with normal senny? Thnx in advance.

up

I bought my digitizer on ebay for ~ 35$ and changed it using youtube videos. Everything works perfectly.

Pretty easy
HI guys,
i repair alot of phones in my spare time and the sensation is pretty easy you can also get a foam seal for the digitizer to prevent dust

ar3na2012 said:
HI guys,
i repair alot of phones in my spare time and the sensation is pretty easy you can also get a foam seal for the digitizer to prevent dust
Click to expand...
Click to collapse
I just repair my sensation with spare parts from ebay and it works great.