Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
ferrari373 said:
Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
Click to expand...
Click to collapse
I have replaced several screens on Touch Diamonds, however the LCD matrix appears to actually be stuck onto the digitiser and the LCD itself is very very fragile. I usually replace the whole unit (LCD screen and digitiser) because it is much easier. You can purchase these from various sellers in Hong Kong on Ebay.
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
ferrari373 said:
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
Click to expand...
Click to collapse
My recommendation would be to re-sell the touch screen and buy yourself a complete LCD & digitiser module. It is much much easier to do. In terms of taking the phone apart, it is fairly straight forward. Be careful with the small co-axial cables inside though, because they are easily damaged and difficult to obtain without replacing the antenna board. Re-connecting the ribbon cables can also be a bit fiddly.
The LCD and digitiser are glued into the front of the phone. You will need to disassemble the phone and then very carefully using a plastic flat blade, ease the LCD out of the front of the phone housing. It will come out with a little bit of care. There should be enough glue remaining in the housing to re-seat the replacement unit and hold it in place.
If you google you should be able to find the HTC Diamond service manual which tells you how to take the phone apart and re-assemble it. I have a copy, so if you can't track it down, PM and I will e-mail it to you.
Andy
Hi,
To barncourt, how is the build quality of those honk kong made screens?
also a lot of the screen+digitizer that i have seen on ebay all have the front facing camera. would it be possible to use that screen even though my diamond is the one that has no front facing camera?
Of course, it is just a hole
p.brazauskas said:
Hi,
To barncourt, how is the build quality of those honk kong made screens?
Click to expand...
Click to collapse
Okay, but I tend to buy from the same seller. Not had any particular problems.
barncourt said:
Okay, but I tend to buy from the same seller. Not had any particular problems.
Click to expand...
Click to collapse
Hi I wanna know can you share your supplier adress with us ?
I'm looking for a LCD+digitizer and what I see is not something giving confidence...
So if you can give us some real-tested place to start...
Also I've dismantle the phone but it's quite hard to take the screen+digitizer away...
it's seems completely fixed with the housing does some one got s pics or guide on how to dismantle and replace the screen
(The HTC service guide you can see here and there just don't deal with the screen.)
and when I started just broke my screen (which was already broken anyway so...)
http://www.fuelip.com/howto/diamondlcd/diamondlcd.htm
I followed that guide and replaced my screen. I have one last problem though - I can't fit back my power button. It's made of two parts the black plastic cover and the transparent rubber. How do you stick them together? I'ts funny that I took my whole diamond apart with all the cables and boards and now I can not figure out how to fix a silly button
Related
I accidentally broke a 1cm strip at the top of LCD on my Touch Cruise, not the touchscreen but the underlying LCD.
Do I have any options apart from replacing the phone?
Not realy...
karlth said:
I accidentally broke a 1cm strip at the top of LCD on my Touch Cruise, not the touchscreen but the underlying LCD.
Do I have any options apart from replacing the phone?
Click to expand...
Click to collapse
how did it happened ?
eami said:
how did it happened ?
Click to expand...
Click to collapse
It was in my jacket pocket and hit a side of a garden bench. Not a major blow but enough to crack it. Then again I always felt that it wasn't particularly well glued/screwed together (Mine was from the first batch of phones).
Strange because my old HTC Prophet seemed to be able to withstand any punishment.
is it the digitizer that broke or the screen as well ?
digitizer
http://cgi.ebay.co.uk/LCD-TOUCH-SCR...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
screen
http://cgi.ebay.co.uk/NEW-LCD-FOR-H...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
both are in decent price i guess
Brilliant
I'll order one immediately.
Is there anywhere in the net a "how to" that shows me how to open the Orbit II?
Not that I'm aware of but I'm expecting instructions with the LCD when I receive it.
most sellers don't provide instructions to disassemble, especially if off eBay.
Look at this...
Hey,
look in this Thread, maybe that this could help you.
http://forum.xda-developers.com/showthread.php?t=392301
Frank
i recently dropped the phone and am thinking whether it is worth it or not to buy new housing. i have a touch diamond nam 3g with rubber back and no front facing camera. can anyone give me links to where i can find housing for my model. i saw a lot on ebay but those look like housings for the euro and asian model with glossy back and front facing camera. also if i want to switch off the front screen because of scratches, should i buy a whole new lcd or should i just buy a digitizer cuz i heard that it is hard to change just the digitizer.
anybody know anything about this?
If you need original housing it will cost you.
I bought from this company recently (EU)
http://www.mytrendyphone.com/shop/htc-touch-pro-13838p.html - £15.75
http://www.mytrendyphone.com/shop/htc-touch-diamond-11870p.html - £35.29
http://www.mytrendyphone.com/shop/htc-touch-diamond-13679p.html - £19.41
Total £70.45 + shipping
Note: The shipping is low from this company.
But your Diamond will be like brand new.
do they ship to the US though? also i don't see the actual front housing in there. i see that you bought a digitizer too. how hard is it to replace the digitizer?
From what I have seen, the phone has to be completely disassembled to change the digitizer, doesn't look like an easy task.
yeah but what i mean is, is it easy to detach the digitizer from the lcd screen?
kevinf1990 said:
yeah but what i mean is, is it easy to detach the digitizer from the lcd screen?
Click to expand...
Click to collapse
i have asian non 3g htc touch diamond white without front facing camera. i just bought it two days back and from what i have seen nd heard, it's very difficult to replace digitizer or screen alone, if u cud get 'em get a screen wid a digitizer nd if u wanna save some money purrchase the housing with digitizer alone. but be very careful while removing the digitizr from lcd. they are sort of glued together but when u remove it, u shud have enough gule left to paste it into new digitizer.
nd sellers from hong kong are quite friendly. just ask a question to them on ebay about ur requirement and m quite sure they can make available to you whateva u want.
PS: i got it about two weeks back nd not two days.
where did you find a digitizer that doesn't have the front camera hole though
Hi all,
I sat on my Fuze, short and simple. There is now a weird crack on the screen. I am very familiar with what a broken LCD looks like, there is no LCD "liquid" oozing all over the place, and the picture is not distorted in any way. It looks like some kind of lens INSIDE might be broken, and I think it's the digitizer. The cracks stop once they get to the dark grey at&t/HTC border around the screen, even though I hit very close to it, so whatever I cracked is under the top lens/protector.
Also, I read online (albeit at a cell phone repair website) that you can't replace the digitizer without ruining the LCD. Is there any merit to this, or are they just trying to convince people to pay their obscene $149 to replace a $30 part?
So I guess I have two questions:
Did I break the digitizer, the topmost lens, or somehow the LCD glass without damaging the LCD itself?
How hard is this to replace?
Pics:
EDIT: I ordered this on April 17th. Fat chance AT&T will do anything about it, right?
That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....
wxy117 said:
That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....
Click to expand...
Click to collapse
If I'm not mistaken (and I might be), all this should take is removing the two small phillips head screws on the back of the screen that show when the phone is slid open. I landed on this thing while it was open, and drove my knee right into the screen, I'm surprised I didn't break anything else.
There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5
wxy117 said:
There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5
Click to expand...
Click to collapse
So we do have to take the whole damn thing apart?
Does anyone have any luck with AT&T replacing things that are clearly accidental damage? With all the horror stories I hear about refurbished phones and the chance that they might send me one, I'd actually rather take my chances at fixing this. I've taken apart a ton of phones and fixed them before, and worked at a cell phone repair shop for a few months. I still have most of my tools lying around, including all the screw drivers I'd need to open this.
I was able to find an HTC service manual that doesn't really explain how to replace the digitizer. It does describe how to get it in two pieces, but I wouldn't know where to go from there.
I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.
wxy117 said:
I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.
Click to expand...
Click to collapse
Found a good complete disassembly guide in Russian, why does the screen have to be the LAST thing to come out? I am now looking to buy an LCD/digitizer combo, but I can only find the one from Brando that is made for regular HTC Touch Pros, and not the Fuze (has a camera cutout instead of the AT&T logo).
If I end up having to replace the LCD I'd much rather break it trying to save $50 than just toss it. Is it really that hard to separate the digitizer from the LCD?
http://translate.google.com/transla...ka/htc-touch-pro/&sl=ru&tl=en&history_state0=
has anyone had success separating the Digitizer and the LCD screen?
wxy117 said:
has anyone had success separating the Digitizer and the LCD screen?
Click to expand...
Click to collapse
Well, we'll find out. I ordered both an AT&T Fuze digitizer by itself as well as an LCD with a digitizer attached. I'm just going to go ahead and replace everything with the combination unit and see if I can replace my broken digitizer without breaking my LCD in my free time. If it works, I have a spare or I can sell it
be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....
wxy117 said:
be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....
Click to expand...
Click to collapse
Hopefully I'll get it right, I made sure to order an AT&T Fuze digitizer that made it clear it wasn't for use with Sprint Touch Pros or Touch Pros with front facing camera.
The LCD+digitizer I ordered though may very well show up as any of the above, if they're not already attached I'm going to use the AT&T Fuze digitizer on the new LCD, and try and make a new working combo from my old LCD to resell. I'll make a detailed step by step with photos as well.
Don't forget to read this
They just sent out my new one today.... So anyone that needs a digitizer for the Fuze by Sprint hit me up.... They told me to keep it so now I have an extra digitizer that doesn't work for my phone...
I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!
pisqle said:
I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!
Click to expand...
Click to collapse
Thank you for some rather broken, but very helpful advice. Kinda sucks that I'm really happy since I don't have to worry about removing any adhesive, but now I have to sit here and solder flex cables. I shoulda bought a spare one
Do they ship these parts on pigeons from Hong Kong?
To anyone counting on being able to separate the LCD from the digitizer, DON'T. There is absolutely no way to separate them without destroying either or both. Also, take extreme caution when peeling up the flex cable, it is very easy to tear (I tore mine).
So my net cost, 80 + 50, LCD/Digitizer and Flex Cable = $130 vs. sending it to HTC $150. I advise anyone to just pay them rather than take this thing apart.
from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*
wxy117 said:
from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*
Click to expand...
Click to collapse
Fact of the matter is when people say this is a delicate phone to take apart, they mean it. I worked at a cell phone repair store for a few weeks, and learned how to take apart damn near anything (thank God this was before the iPhone existed). Not only are both flex cables in this phone taped down in 100 different places, making them very easy to tear while removing the tape, the adhesive used between the LCD and digitizer is STRONG. If you really wanted to separate them, you might have some luck with a straight edge and maybe an hour. Good luck, I'll let you all know how this turns out once I have my new flex cable, since I conveniently tore the volume buttons off the original.
I just got my screen today so we're gonna see some time next week how we do on this screen replacement....I'll let you know how it goes....
So far no luck with my digitizer. Has anyone had any luck just changing out the digitizer yet? The guy that was suppose to do mine is backing out because he doesn't want to risk cracking my LCD. I don't blame him thats the reason I didn't do it. sheik124 what are you doing with your damaged fuze? Are you sending it to HTC for repairs?
Hello all I hope someone here can guide me because I am at a loss.
A couple weeks ago I cracked my screen and have been searching for a replacement
Digitizer since then but everywhere I look is either out of stock or comes with the
LCD (which I don't need ).
I know this is a bit forward for my first post here but I am hoping someone
may have a suggestion as to where I might be able to pick one up so I can finally get my phone back to it's
original glory.
Thanks in advance for any help/suggestions on this matter.
In htc digitzer and screen are unity, so if you have problem with touch, you have to change all screen.
ampedoe Luise
SkuterPL said:
In htc digitzer and screen are unity, so if you have problem with touch, you have to change all screen.
Click to expand...
Click to collapse
From what I have read the glass and the digitizer are one piece but it is possible to separate the LCD in this guide :
androidforums. com/htc-one-s/609247-how-fix-htc-one-s-screen.html
Problem is every website I have looked at the glass/digitizer is out of stock and it's triple the price to get it with the LCD.
you can't separate, because in amoled all layer are connected in fabric.
http://www.oled-display.net/wp-content/uploads/u2/super-amoled-technical-details.jpg See this pictrue the touch sensor is under glasses.
i repair phones for a living. and i'm telling you, DO NOT ATTEMPT TO TAKE APART THE DIGITIZER AND LED!!! most new htc phones, like the iphone 4/4s and newer samsung phones the glass and display come together. yes, it is possible to take them apart, it's more hassle then it's worth, you are almost guaranteed to break your display (unless you've done it a few dozen times) and then when you try to put everything back together, it will not fit together right because the LED will be warped by your pulling and bending it out of the frame. also, any part you see sold as just the digitizer is either not the correct part and even if it fits and works it is not OEM
HidaKureku said:
i repair phones for a living. and i'm telling you, DO NOT ATTEMPT TO TAKE APART THE DIGITIZER AND LED!!! most new htc phones, like the iphone 4/4s and newer samsung phones the glass and display come together. yes, it is possible to take them apart, it's more hassle then it's worth, you are almost guaranteed to break your display (unless you've done it a few dozen times) and then when you try to put everything back together, it will not fit together right because the LED will be warped by your pulling and bending it out of the frame. also, any part you see sold as just the digitizer is either not the correct part and even if it fits and works it is not OEM
Click to expand...
Click to collapse
I appreciate you taking the time to clarify that for me, I had hoped it would have been easier than that. I can start looking for the correct part now and finally get my phone sorted out.
Again thanks for your help.
Question:
My sweet little girl scratch "gorila" glass on my one s.
Is it possible change only glass, i plan to buy spare part from this link:
etradesupply.com/oem-htc-one-s-glass-lens.htm
Hi All,
I've seen this question asked but haven't found a clear answer.
Could someone confirm whether or not the digitizer and the LCD are bonded together on the Sensation?
If so is it worth the risk to try and replace just a shattered screen and save some money or should I go ahead and buy a front assembly (digitizer+LCD) to be safe?
Thanks
[email protected] said:
Hi All,
I've seen this question asked but haven't found a clear answer.
Could someone confirm whether or not the digitizer and the LCD are bonded together on the Sensation?
If so is it worth the risk to try and replace just a shattered screen and save some money or should I go ahead and buy a front assembly (digitizer+LCD) to be safe?
Thanks
Click to expand...
Click to collapse
No they aren't, they are 2 different pieces
Sent from my HTC Sensation Z710e using Tapatalk 2
elvisypi said:
No they aren't, they are 2 different pieces
Sent from my HTC Sensation Z710e using Tapatalk 2
Click to expand...
Click to collapse
Well that was fast, clear and concise! Thanks.
So when the hereunder item's description specifies "pre-bonded" (under 'package' or in the page title) it's basically bulls***?
http://www.replacebase.co.uk/htc-se...--digitizer-touch-panel---original-1813-p.asp
[email protected] said:
Well that was fast, clear and concise! Thanks.
So when the hereunder item's description specifies "pre-bonded" (under 'package' or in the page title) it's basically bulls***?
http://www.replacebase.co.uk/htc-se...--digitizer-touch-panel---original-1813-p.asp
Click to expand...
Click to collapse
I would say so, check YouTube, there are some videos quite clearly showing that they are not bonded together.
To save you searching, one of them is this:
http://www.youtube.com/watch?v=5ImE5hUXK8s
Sgt.Incontro said:
I would say so, check YouTube, there are some videos quite clearly showing that they are not bonded together.
To save you searching, one of them is this:
http://www.youtube.com/watch?v=5ImE5hUXK8s
Click to expand...
Click to collapse
Right, so it seems indeed. Although those videos never show you the result after putting it all back together.
I guess the only remaining advantage to buying the "pre-bonded" unit is to avoid having to fiddle with trying to have zero fingerprints and/or dust particles between the two when reassembling...?
[email protected] said:
Right, so it seems indeed. Although those videos never show you the result after putting it all back together.
I guess the only remaining advantage to buying the "pre-bonded" unit is to avoid having to fiddle with trying to have zero fingerprints and/or dust particles between the two when reassembling...?
Click to expand...
Click to collapse
Yes, I think you're right. I don't think it's convenient though
Sent from my HTC Sensation Z710e using Tapatalk 2
elvisypi said:
I don't think it's convenient though
Click to expand...
Click to collapse
Why's that?
Waste of money if u break it again
"HTC Amaze - Nightmare Sense 1.6"
"HTC Sensation - MIUI"
"LG G2x - Stock and overclocked"
"LG Thrill - Slim Stock Rom"
[email protected] said:
Why's that?
Click to expand...
Click to collapse
To buy the pre bonded just for the dust free digitalizer
Sent from my HTC Sensation Z710e using Tapatalk 2
I've had a Sensation apart to replace just the LCD piece. It was a huge pain in the butt to get the glass off the LCD. They are glued together with some pretty strong glue.
It's possible that the advertisement you cited just means they are already glued together when they say "pre-bonded".
fixed lcd
bought on ebay and replaced my LCD myself 2days ago. The LCD is bonded more strongly to the shell and the digitizer ontop of it meaning you have to separate them any way to change as the digitizer will comes of its self. They even have separate cables to the main board. The glue isnt that stong, slow careful lifting it with the plastic tool kept things undamaged, so i didnt use a heat gun as too mch risk of oveheating the still good digitizer. I love my screen now , dead pixels smack in the middle were driving me nuts!! now just to fix my wifi issues....
Right so they ARE bonded!
Problem is, my digitizer is really badly shattered. So badly that a couple tiny fragments have come off when swiping the screen, leaving the LCD exposed. So if they're indeed "glued" together, won't I be taking a risk trying to remove all those glass fragments from the LCD in hope of reusing it (the LCD, that is)?
osaedu said:
bought on ebay and replaced my LCD myself 2days ago. The LCD is bonded more strongly to the shell and the digitizer ontop of it meaning you have to separate them any way to change as the digitizer will comes of its self. They even have separate cables to the main board. The glue isnt that stong, slow careful lifting it with the plastic tool kept things undamaged, so i didnt use a heat gun as too mch risk of oveheating the still good digitizer. I love my screen now , dead pixels smack in the middle were driving me nuts!! now just to fix my wifi issues....
Click to expand...
Click to collapse
So what you are saying is that even if I buy a new front assembly (LCD + digitizer) I will have to separate them anyway to put it back together?? That seems odd...
BTW, where did you buy your parts?
lcd replacement
[email protected] said:
Right so they ARE bonded!
Problem is, my digitizer is really badly shattered. So badly that a couple tiny fragments have come off when swiping the screen, leaving the LCD exposed. So if they're indeed "glued" together, won't I be taking a risk trying to remove all those glass fragments from the LCD in hope of reusing it (the LCD, that is)?
So what you are saying is that even if I buy a new front assembly (LCD + digitizer) I will have to separate them anyway to put it back together?? That seems odd...
BTW, where did you buy your parts?
Click to expand...
Click to collapse
I meant that digitizer is glued to the lcd but more lightly than LCD to body. Therefore when disassembling the digitizer comes of on its own as the glue is not strong enough to pull the LCD from body together with it. They are not bonded together as strong as samsung phones. Only bonded with not so strong glue along a small strip on the edge of digitizer; the area with black coat underneath. Taking a look at the older LCD, actually there is this sticky tape that maybe separating the two, the tape sticks to the LCD wraps it around and the tape glued to the body underneath with the digitizer on top of the tape. just carefully remove the digitizer parts, not as bonded together as you may think. if your carefull you wont need to replace both.
Bought the LCD on ebay.
Ok to end this thread and so u can get Ur answer watch this video and you will know how to fix an HTC sensation that has been broken...
https://www.youtube.com/watch?v=5ImE5hUXK8s&feature=youtube_gdata_player
Pay attention cuz many people here are confusing you...
"HTC Amaze - Nightmare Sense 1.6"
"HTC Sensation - MIUI"
"LG G2x - Stock and overclocked"
"LG Thrill - Slim Stock Rom"