Database Info

screen replacement

Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!

ferrari373 said:
Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
Click to expand...
Click to collapse
I have replaced several screens on Touch Diamonds, however the LCD matrix appears to actually be stuck onto the digitiser and the LCD itself is very very fragile. I usually replace the whole unit (LCD screen and digitiser) because it is much easier. You can purchase these from various sellers in Hong Kong on Ebay.

I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???

ferrari373 said:
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
Click to expand...
Click to collapse
My recommendation would be to re-sell the touch screen and buy yourself a complete LCD & digitiser module. It is much much easier to do. In terms of taking the phone apart, it is fairly straight forward. Be careful with the small co-axial cables inside though, because they are easily damaged and difficult to obtain without replacing the antenna board. Re-connecting the ribbon cables can also be a bit fiddly.
The LCD and digitiser are glued into the front of the phone. You will need to disassemble the phone and then very carefully using a plastic flat blade, ease the LCD out of the front of the phone housing. It will come out with a little bit of care. There should be enough glue remaining in the housing to re-seat the replacement unit and hold it in place.
If you google you should be able to find the HTC Diamond service manual which tells you how to take the phone apart and re-assemble it. I have a copy, so if you can't track it down, PM and I will e-mail it to you.
Andy

Hi,
To barncourt, how is the build quality of those honk kong made screens?

also a lot of the screen+digitizer that i have seen on ebay all have the front facing camera. would it be possible to use that screen even though my diamond is the one that has no front facing camera?

Of course, it is just a hole

p.brazauskas said:
Hi,
To barncourt, how is the build quality of those honk kong made screens?
Click to expand...
Click to collapse
Okay, but I tend to buy from the same seller. Not had any particular problems.

barncourt said:
Okay, but I tend to buy from the same seller. Not had any particular problems.
Click to expand...
Click to collapse
Hi I wanna know can you share your supplier adress with us ?
I'm looking for a LCD+digitizer and what I see is not something giving confidence...
So if you can give us some real-tested place to start...
Also I've dismantle the phone but it's quite hard to take the screen+digitizer away...
it's seems completely fixed with the housing does some one got s pics or guide on how to dismantle and replace the screen
(The HTC service guide you can see here and there just don't deal with the screen.)
and when I started just broke my screen (which was already broken anyway so...)

http://www.fuelip.com/howto/diamondlcd/diamondlcd.htm

I followed that guide and replaced my screen. I have one last problem though - I can't fit back my power button. It's made of two parts the black plastic cover and the transparent rubber. How do you stick them together? I'ts funny that I took my whole diamond apart with all the cables and boards and now I can not figure out how to fix a silly button

I sat on my Fuze :(

Hi all,
I sat on my Fuze, short and simple. There is now a weird crack on the screen. I am very familiar with what a broken LCD looks like, there is no LCD "liquid" oozing all over the place, and the picture is not distorted in any way. It looks like some kind of lens INSIDE might be broken, and I think it's the digitizer. The cracks stop once they get to the dark grey at&t/HTC border around the screen, even though I hit very close to it, so whatever I cracked is under the top lens/protector.
Also, I read online (albeit at a cell phone repair website) that you can't replace the digitizer without ruining the LCD. Is there any merit to this, or are they just trying to convince people to pay their obscene $149 to replace a $30 part?
So I guess I have two questions:
Did I break the digitizer, the topmost lens, or somehow the LCD glass without damaging the LCD itself?
How hard is this to replace?
Pics:
EDIT: I ordered this on April 17th. Fat chance AT&T will do anything about it, right?

That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....

wxy117 said:
That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....
Click to expand...
Click to collapse
If I'm not mistaken (and I might be), all this should take is removing the two small phillips head screws on the back of the screen that show when the phone is slid open. I landed on this thing while it was open, and drove my knee right into the screen, I'm surprised I didn't break anything else.

There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5

wxy117 said:
There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5
Click to expand...
Click to collapse
So we do have to take the whole damn thing apart?
Does anyone have any luck with AT&T replacing things that are clearly accidental damage? With all the horror stories I hear about refurbished phones and the chance that they might send me one, I'd actually rather take my chances at fixing this. I've taken apart a ton of phones and fixed them before, and worked at a cell phone repair shop for a few months. I still have most of my tools lying around, including all the screw drivers I'd need to open this.
I was able to find an HTC service manual that doesn't really explain how to replace the digitizer. It does describe how to get it in two pieces, but I wouldn't know where to go from there.

I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.

wxy117 said:
I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.
Click to expand...
Click to collapse
Found a good complete disassembly guide in Russian, why does the screen have to be the LAST thing to come out? I am now looking to buy an LCD/digitizer combo, but I can only find the one from Brando that is made for regular HTC Touch Pros, and not the Fuze (has a camera cutout instead of the AT&T logo).
If I end up having to replace the LCD I'd much rather break it trying to save $50 than just toss it. Is it really that hard to separate the digitizer from the LCD?
http://translate.google.com/transla...ka/htc-touch-pro/&sl=ru&tl=en&history_state0=

has anyone had success separating the Digitizer and the LCD screen?

wxy117 said:
has anyone had success separating the Digitizer and the LCD screen?
Click to expand...
Click to collapse
Well, we'll find out. I ordered both an AT&T Fuze digitizer by itself as well as an LCD with a digitizer attached. I'm just going to go ahead and replace everything with the combination unit and see if I can replace my broken digitizer without breaking my LCD in my free time. If it works, I have a spare or I can sell it

be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....

wxy117 said:
be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....
Click to expand...
Click to collapse
Hopefully I'll get it right, I made sure to order an AT&T Fuze digitizer that made it clear it wasn't for use with Sprint Touch Pros or Touch Pros with front facing camera.
The LCD+digitizer I ordered though may very well show up as any of the above, if they're not already attached I'm going to use the AT&T Fuze digitizer on the new LCD, and try and make a new working combo from my old LCD to resell. I'll make a detailed step by step with photos as well.

Don't forget to read this

They just sent out my new one today.... So anyone that needs a digitizer for the Fuze by Sprint hit me up.... They told me to keep it so now I have an extra digitizer that doesn't work for my phone...

I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!

pisqle said:
I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!
Click to expand...
Click to collapse
Thank you for some rather broken, but very helpful advice. Kinda sucks that I'm really happy since I don't have to worry about removing any adhesive, but now I have to sit here and solder flex cables. I shoulda bought a spare one
Do they ship these parts on pigeons from Hong Kong?

To anyone counting on being able to separate the LCD from the digitizer, DON'T. There is absolutely no way to separate them without destroying either or both. Also, take extreme caution when peeling up the flex cable, it is very easy to tear (I tore mine).
So my net cost, 80 + 50, LCD/Digitizer and Flex Cable = $130 vs. sending it to HTC $150. I advise anyone to just pay them rather than take this thing apart.

from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*

wxy117 said:
from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*
Click to expand...
Click to collapse
Fact of the matter is when people say this is a delicate phone to take apart, they mean it. I worked at a cell phone repair store for a few weeks, and learned how to take apart damn near anything (thank God this was before the iPhone existed). Not only are both flex cables in this phone taped down in 100 different places, making them very easy to tear while removing the tape, the adhesive used between the LCD and digitizer is STRONG. If you really wanted to separate them, you might have some luck with a straight edge and maybe an hour. Good luck, I'll let you all know how this turns out once I have my new flex cable, since I conveniently tore the volume buttons off the original.

I just got my screen today so we're gonna see some time next week how we do on this screen replacement....I'll let you know how it goes....

So far no luck with my digitizer. Has anyone had any luck just changing out the digitizer yet? The guy that was suppose to do mine is backing out because he doesn't want to risk cracking my LCD. I don't blame him thats the reason I didn't do it. sheik124 what are you doing with your damaged fuze? Are you sending it to HTC for repairs?

[GUIDE] I9000 Screen Replacement

This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128

pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.

Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.

the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect

pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.

gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?

If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!

I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.

Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.

please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).

Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App

yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.

pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.

I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.

Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.

YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App

amoled or samoled though?

My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App

Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?

Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App

LCD replacement without removing digitizer

I've a Sensation with a broken LCD but working digitizer. All the movies on Youtube shows tutorials where first the digitizer is removed. There's only one movie that goes further and after removing the digitizer they removed the LCD. Look this at 7:42. http://www.youtube.com/watch?v=gO9MnQRa7xQ
I've also replaced a LCD of a HTC Desire, but there I can replace the LCD without removing the digitizer. That saved me a lot of time. Can anyone says this is also possible at the sensation or the de LCD only been removed from the front and not from the back.

The digitiser is physically adhered to the LCD screen so no, you will have to remove the digitiser before you can replace the screen.

boomboomer said:
The digitiser is physically adhered to the LCD screen so no, you will have to remove the digitiser before you can replace the screen.
Click to expand...
Click to collapse
Oke, thank you.

boomboomer said:
The digitiser is physically adhered to the LCD screen so no, you will have to remove the digitiser before you can replace the screen.
Click to expand...
Click to collapse
Well I read somewhere on here that it's just held by 3M stickies. What do you make of that?

dgenx210 said:
Well I read somewhere on here that it's just held by 3M stickies. What do you make of that?
Click to expand...
Click to collapse
Yes, quite true - 30 seconds warming with a hair dryer and using a scalpel blade you can prise the digitiser carefully off the LCD screen.
The 3M tape makes it easy to replace the front glass but does allow dust to collect between the two layers.

anyone knows how to glue - paste the digitizer on the new LCD? I can't find 3M tape with the shape of a Sensation, only for different models. So I need to cut some parts, but that will follow in a lot of dust between the two parts after a few months.
Is there a way to occur this?

[Q] clean dust under screen

I have the dreaded "dust under screen" issue on my Sensation and getting too bad to ignore. I know there are many threads here and videos online for REPLACING the digitizer. As the digitizer is not damaged i want to lift it, clean and refit with 3M double sided tape. I cant find any video on removing and refiting without replacing the digitizer.
Does anyone know if:
The digitizer can be romoved without damaging the cable?
Remove without damaging/distorting the digitizer when seperating from the screen?
Can the digitzer be lifted off screen without disassembling the phone? (Preferred option)
I have searched and cant find any info both on XDA and elsewhere. I know the digitizers can be bought cheaply but id rather not have to take the phone apart to replace it.

it took me 1min to google for this
https://www.youtube.com/watch?feature=player_detailpage&v=5ImE5hUXK8s

matt95 said:
it took me 1min to google for this
https://www.youtube.com/watch?feature=player_detailpage&v=5ImE5hUXK8s
Click to expand...
Click to collapse
I guess you misread my post..... it would have taken less than a minute to read it properly.
I see lots of videos and info on replacing the digitizer but i dont want to do that. I asked for info on removing/lifting the digitizer without having to fit a new one. I want to know if anyone has done this without damaging the digitizer taking it apart from the screen. I have searched LOTS for the relevant ino but cant find answers.

dub2012 said:
I guess you misread my post..... it would have taken less than a minute to read it properly.
I see lots of videos and info on replacing the digitizer but i dont want to do that. I asked for info on removing/lifting the digitizer without having to fit a new one. I want to know if anyone has done this without damaging the digitizer taking it apart from the screen. I have searched LOTS for the relevant ino but cant find answers.
Click to expand...
Click to collapse
well, if you want to remove the dust then that's the only way to do it..

Update
Just confirming that It is possible to remove and refit the digitizer without breaking it.

dub2012 said:
Just confirming that It is possible to remove and refit the digitizer without breaking it.
Click to expand...
Click to collapse
How did you do it? Please give some more info
Sent from my HTC Sensation Z710e using Tapatalk 4 Beta

As shown in the many online videos and like the link posted above. Just dont cut the ribbon cable.
I bought a toolkit and 3m tape online. Really the only tools needed are a guitar pick(for seperating lcd/digitizer), torx bit, small flat screw driver or similar for prising plastic motherboard cover and a bic pen cap for lifting ribbon cable connectors and pulling cable out.
Must be disassembled as the digitizer cable has little slack for it to be lifted, Make sure you heat well with a hair dryer (heatgun not needed) and dont push the guitar pick too far in as it spreads the adhesive onto the lcd and back of digitizer. Be extra careful at the top corners as I slightly marked the area inside top left border.It can be hard cleaning both surfaces, if u ever fit a screen protector you will know what I mean, just twice as hard.
Powered up first time but left side of keyboard numbers were not working and screen was a bit slow to respond. Stripped phone again to check digitzer cable connections and all were ok.
Flashed a calibration file found on this site and its working fine now. S-OFF and Super CID are required for this so best to do before you start.
Note: Dust was getting in both sides on mine and gathering in the centre. When I cleaned the LCD I noticed, under the heavy dust gathered in the centre, the screen was permanently marked. I guess screen was burned but it cant be seen when the screen is on.

Why would you go through all this trouble? This is covered by your HTC Guarantee.
I allready had the screen replaced one time because of dust. Second time because my phone got sunburned (see sig.) and because dust and now on my "new"device I'm seeing dust again. Getting really tired of it. Haven't had a 100% good phone for 1 day during the first of 2 years contract

Bornin said:
Why would you go through all this trouble? This is covered by your HTC Guarantee.
I allready had the screen replaced one time because of dust. Second time because my phone got sunburned (see sig.) and because dust and now on my "new"device I'm seeing dust again. Getting really tired of it. Haven't had a 100% good phone for 1 day during the first of 2 years contract
Click to expand...
Click to collapse
Except HTC never fixes this problem. Everytime I sent my phone to them, they just keep cleaning out the dust, nut of course it fills up with dust in a matter of weeks again.
Bought another phone off eBay, haven't looked back since. No dust, no nothing.
Sent from my HTC One XL using xda app-developers app

Bornin said:
Why would you go through all this trouble? This is covered by your HTC Guarantee.
I allready had the screen replaced one time because of dust. Second time because my phone got sunburned (see sig.) and because dust and now on my "new"device I'm seeing dust again. Getting really tired of it. Haven't had a 100% good phone for 1 day during the first of 2 years contract
Click to expand...
Click to collapse
I bought my Sensation used so I had no receipt. Would probably have to go back to stock, S-ON, be without phone for a few weeks etc which was just too much hassle.
Really wasn't too much trouble and it can be done in 20mins.