Hi...i was wondering what happened to my xperia z3...after 2 weeks of using my device fixed by sony service center due to broken screen which i paid for almost half of the price...i thought i was stress free because it was already fixed...but i was so dissapointed when i found out there are yellow tint color at the bottom of my screen especially when viewing white and gray color...this is so unreasonable...does anyone happened to experience this...?
I do, don't know when it happened but I just realized the yellow tint at the bottom of my screen.
Just a thought. Don't let this phone stand too much in the sun and over heat him. Glass becomes quickly hot.
Now, in the case of a repaired phone, it is understandable, maybe they could have done a better job since you paid for the repair.
And another thing, keep the screen away from magnetic fields.
Its a yellow glue, they should replace your screen for free of charge. Xperia S had this problem very common.
Related
I have a strange problem. About week ago i bought my xperia M2, then i albo bought screen foil protector. Yesterday i saw that on my screen is small sami transparent grey point. I can see it only when i watch screen form About 30 cm, when i turn phone a little - about 10 degree i can't see it. Generally it is very hard to see it. Is it cause by screen protector, or it's a hardware problem?
PS. I can't take a picture of this, on picture it is invisible.
I have a similar problem, I think. I don't have any screen protector but recently I noticed something similiar close to the upper right edge of the screen. It's particularly visible when the white or orange themes are set.
After 2+ weeks, I just noticed light bleed (in total darkness) at the bottom left corner, corner of recent menu button. Anyone else getting light bleed?
You can only see it while the recent button light flashes on.
Not on a screen tough....
You talking about gap between screen and metal side (left corner)...yes at night I see light coming from there...we all got that.
Cheap ass samsung:victory::laugh:
Actually, I have it on the right side at where the curved glass meets the metal. Didn't notice it for the first week though which is weird honestly because I scrutinize my devices when I first get them. But yeah it's only a minor annoyance, not worth exchanging it.
Yes, the gap between the screen and the metal ring. Anyone Not have this issue?
I get led bleed.
When the green charging led is on and its really dark in the room. You can see the green bleeding under the black trim and onto the lcd.
Other then that i havent seen any bleeding.
I remember the white models of some of the samsungs phones had bad bleeding.
white note edge
I have it all around the screen on the top and bottom and 2 sodes it looks like its glowing
I guess I'm lucky. No led bleed here but I also have the black version. Are yall using the white?
white note edge
Ok thanks for reply and yes i have the white one
white note edge
It was a fault with the fone i took it back to carphone warehouse and swoped for a black one rhanks for u help
Yeah ive heard quite a few people with the white one complaining of the bleed. I played with the white one in the AT&T store and saw the same thing. Thats why i went with thevplain ol' black. The white looks much better imo but i couldnt deal with the bleeding
white note edge
Yh samsung told me it was a fault so i took it back and got black i do think blsck is better the back is cheap feeling and the edge looks cheap to glad i got black now
I haven't seen any bleeding from the black Verizon Edge so far, at least from the screen to the home button area. Verizon has a cheap, but very awesome and good feeling case that covers the light bleed between the framework. I never noticed it in the 3 days before I got the case though. Has anyone noticed light bleed on their black Edge's so far?
white note edge
Kainoa3 said:
I haven't seen any bleeding from the black Verizon Edge so far, at least from the screen to the home button area. Verizon has a cheap, but very awesome and good feeling case that covers the light bleed between the framework. I never noticed it in the 3 days before I got the case though. Has anyone noticed light bleed on their black Edge's so far?
Click to expand...
Click to collapse
No as i said i bort the white on sim free in the uk lucky really and it was reli bad on the white so took it back to shop and swoped for the black what i wanted in the first place and not one little bit have i seen the white just felt cheap and with the light leakin i mean the whole fone around the edge of the screen was like green wear it was leakin i am not payin £700 for that no way
embieone said:
No as i said i bort the white on sim free in the uk lucky really and it was reli bad on the white so took it back to shop and swoped for the black what i wanted in the first place and not one little bit have i seen the white just felt cheap and with the light leakin i mean the whole fone around the edge of the screen was like green wear it was leakin i am not payin £700 for that no way
Click to expand...
Click to collapse
Yeah I read your post about swapping them out. I originally wanted the white because it looked cleaner, but now that I have the black and after reading all the posts I'm so glad Verizon only has the black one available. I don't blame you, I wouldn't pay that much for something I wasn't completely happy with either.
Hello. My new Xperia Z5 seems to be working great so far.
I noticed that the back panel is slightly lifted on the top right corner to the point where you cannot feel where it meets the plastic side. If you push it down, you can feel where it meets the rim but after a while it returns to its normal position.
There also a noticeable gap on the left side and top left where dust seems to get in. The rest of the panel seems to fit fine.
Is anyone else having these problems? I'm mainly worried about it affecting the waterproofing.
Thanks.
i had that issue with my xperia Z2 but not with the Z5 that i own now...but i have a bright white spot on my screen and it appeared few days ago LOL going to sony service ASAP
cocagenda2 said:
i had that issue with my xperia Z2 but not with the Z5 that i own now...but i have a bright white spot on my screen and it appeared few days ago LOL going to sony service ASAP
Click to expand...
Click to collapse
Did it cause any problems? Waterproofing etc.
well i went in the water for about 30 min and i can tell u it worked till 30 mins and then the screen started to flicker and went emediatly out of water cuz it would break of course. i had water inside the phone so i had to dry it on the sun... so i think it can cause problems if u ask me...but at the end i wouldnt recomend u submerging the phone or geting it wet cuz its not made for that...its made for sudden drops in the water and thats mostly it!!hope i cleared ur mind
Hi guys,
I have replaced the screen in my nexus 5 twice now. I purchased the screens from Amazon. The first screen on white backgrounds I would kind of see a square image on the screen in white. It kind of looked like the outline of the battery. It also had a few white spots on the screen. I tried loosening some of the screws but it didn't help. I contacted the seller and he recommended another replacement. He sent out another screen plus digitizer and frame.
The new screen arrived and I put it in. This screen is a lit better. I know only get 3 tiny white spots about the size of the screws in the nexus 5. Two look like they are where the battery would be inside the phone. The third is about 3 quarters of the way up the screen in the middle and slightly to the left. Why does this keep happening? Anyone got any ideas on what could be causing this?
One thing I have noticed is in the dark with the screen on around the sides of the phone in places I can see slivers of light shining around the screen. It seams that the tape that the screen provider used was not sticky enough. Could this be what is causing the white spots? The screen seams firmly attached at the top and bottom just the sides. I heated it up with a blow dryer and held the screen down till it cooled. It slowly goes back to the way it was.
Thanks,
Rocky
Light bleeding from the edges of the frame in a dark environment is not uncommon with 3rd party screens. Putting on a case can help a lot.
As for the white spots, it may be a manufacturing defect that has nothing to do with the way you assembled the phone.
So there is nothing that can be done about the white spots? I don't understand how both screens did this. Seams like there is a very high failure rate. From comparison and matching numbers s to the stock digitizer the replacement seams to be a stock digitizer and frame. The white spots are annoying.
It's possible that both screens came from the same production run. I used screens from aliexpress and only one had a bit of light bleed around the frame. Once I put on a case, you could not see the light bleed.
None of the replacement screens had any dead or stuck pixels or hot spots.
Hi Guys,
I have a Samsung Galaxy S7 Edge Gold which I purchased while I was traveling from the Uae.
The phone had an issue with the home button and I had to eventually send it back to get it repaired.
The service center in the UAE replaced the entire screen and front panel of the phone and now everything works fine.
But i noticed the other day that there is a gap in the screen and metal frame of the phone on the left side.
And through this gap i can see the connector of the volume button.
The gap is larger on the left side and very minimum on the right side.
Through this gap light leaks and its very annoying.
I can easily slide a piece of paper through the gap but I cannot slide a thick business card.
I am extremely concerned about two things:
1) Water getting in through the gaps
2)The light leaking making my screen and device faulty.
I can see the light leak during the day when the screen is maxed at brightness although it is more visible in a darker environment and also the LED notification light bleeds just a bit from the top gap between the screen and frame.
I was wondering if this was normal?
I pray to god that it is as my warranty expires in 2months and I have no one to send my phone back with or otherwise I need to spend 300$ for a repair.
I have attached pictures... Do let me know what you think.
Thanks
salvator101 said:
Hi Guys,
I have a Samsung Galaxy S7 Edge Gold which I purchased while I was traveling from the Uae.
The phone had an issue with the home button and I had to eventually send it back to get it repaired.
The service center in the UAE replaced the entire screen and front panel of the phone and now everything works fine.
But i noticed the other day that there is a gap in the screen and metal frame of the phone on the left side.
And through this gap i can see the connector of the volume button.
The gap is larger on the left side and very minimum on the right side.
Through this gap light leaks and its very annoying.
I can easily slide a piece of paper through the gap but I cannot slide a thick business card.
I am extremely concerned about two things:
1) Water getting in through the gaps
2)The light leaking making my screen and device faulty.
I can see the light leak during the day when the screen is maxed at brightness although it is more visible in a darker environment and also the LED notification light bleeds just a bit from the top gap between the screen and frame.
I was wondering if this was normal?
I pray to god that it is as my warranty expires in 2months and I have no one to send my phone back with or otherwise I need to spend 300$ for a repair.
I have attached pictures... Do let me know what you think.
Thanks
Click to expand...
Click to collapse
Water resistance is definitely gone, so don't get it wet. I did the exact same thing with an old iPhone I had and when they sent it back that hadn't fitted the screen in properly. Do you have a local shop, you could ask them to pop it back in for you?
Light leaking through edge will not damage your screen. If you mean moisture fettering inside your phone his could become an issue over time, depending on the environment you expose it to.
You can buy screen replacement tool kits (no actual screen) on ebay for a few dollars, you could do it yourself if your warranty is not valid in new country, it's probably just some component (seal probably) not properly seated that is stopping the case closing properly