So today I rooted my my phone, and now when I turn it off, the bootloader warning message shows up and it reboots. Is it supposed to do this, or did the rooting get messed up somehow? Is there a way I can fix this without unrooting and resetting my phone again?
Everything on the phone works just fine, except my Love Live game which is another issue altogether - even with rootcloak it wont launch.
Rooting would not cause that problem.
Is the usb cable connected when you turn off the phone? If it is, try powering off without having the USB cable connected to the phone.
Related
Hello everyone.
Once upon a time i came to my TP and tried to activate the screen. nothing happened. Screen dead - only very faint backlight showed up. So i thought, maybe the ROM went bad somehow. So i tried soft reset. No change. I tried Hard-reset (which is not as easy when you dont see a thing). Now i thought, ok, just flash it again. BUT thats when the heavy thing came in. The USB cabel doesnt work. It does charge through the cable, but the PC doesnt recognize it at all. Anyone has an idea how i could get in connection with it? If i cannot bring up a USB connection will the guys at the repair factory be ale to connect somehow? I still have warranty (time-wise).
I will be gratefull for any idea on how to make the USB connection or how to flash without USB connection.
After some trying i found out that Windows somehow reserves USB slots for certain devices and after plugging the cable into different slot i managed to get a Sync and USB connection.
Then i faced the problem with returning "blinded" stock ROM and stock SPL. Thanks to the great guides here i managed to download a Stock ROM and flash it onto the Raphael. Then i faced the problem with putting in the Stock SPL, but it worked once i put the device into bootloader mode with Volume Down + reset.
So now i hope my device is as Stock as i bought it, and i will be sending it in for warranty repair or exchange. I hope its just some minor problem with display.
I'm having a problem with my transformer, it wont turn on withou being connected to the dock or usb to a computer...
I've tried to install another rom but it still keeps the problem.. What can i do?
I've updated to ICS, is there any way that this update is related to the problem? thanks
EDIT: Installing custom rom, downgrading back to HC and it still remains.. What can i do?
Does it work properly after its booted? I mean, can you disconnect it from the dock/PC?
My first thought was "busted battery", but that doesnt quite seem to fit...
You could try draining the battery completely in the tablet, then leave it charging over night (turned off, not connected to dock or PC) and see if that helps.
Sounds like a bad power button. After it turn on with USB or dock connection, does it still stay power on and operate normally?
Yes, its fully operational... I've tried to reset battery stats too...
Hey guys,
I was just checking to see if anyone notices that after you plug in your device to the PC that you gain access to your files on the device and SD Card but once the phones screen shuts off the device becomes unresponsive on the PC?
Is there an always on feature like there was for the fascinate, or what can I do to stop this from happening?
Mine definitely does not behave that way. Once connected I have access until I disconnect it, regardless of the screen state.
Hi all please help me resolve this issue. The issue is My lg g2 D800 is not charging. I still got 30% of battery left. everything is working normally. There is no problem with any other functionality. also the battery is draining normally. I did a factory reset but that didn't solve the issue. but when i totally shut down the phone and connect the usb it shows that it charging in shut down mode but its take like 5 hours to charge 4%. I also can go download mode by pressing and hold vol+ and connecting usb to the pc but i cant find my phone in download mode. also in normal mode USB cant find my phone.
only the phone shows the red notification of charging when i shut it down but normally it's charging in a super snail mode. i tried different cable and charger that works perfectly with other phone.
should i replace the charging port? or is there any voltage regulator that is damage? in that case i might change the whole motherboard. I thought of resetting the phone to kitkat using the lg flashing tool that i normally use to jump from 20c to 20y then to lollipop but since i cant find my phone in download mode i cant even try that. I did rooted my phone previously but now i am using lollipop without rooting.
thanks in advance for any helpful suggestion.
I have this problem too. . .are you got a solution?
Hello there everyone, hope you guys are doing great. Well, this thread might be a bit stupid at first since many others might have posted something related to it but since I couldn't find the exact answer, I had to post a newer thread.
I have a Fire Phone which used to run great and perfect and I had been using it the other day while charging it with an Aspor Powerbank which does run great. The Fire Phone got stuck due to a few NOT FOR THE FIRE PHONE apps such as the Instagram and the rest. When stuck, I held the power button for 10-15 seconds to do a reset and it did work while it was still on charging. Now the phone wouldn't turn on without the AC power via the USB. It gets stuck in a boot-loop. Just shows the Amazon logo and restarts again. Nothing works at all, not even the recovery mode or the rest or even resets without the USB plugged in.
I did try to upgrade but was of no use at all, did try the Cynogen OS by flashing it in. It didn't work at all and the same issue persists. I have removed the battery and plugged it back in but again of no use. The battery does charge if you think it's the battery, The battery does stay there active and great. I did try changing the USB cable and the Adapter. Nothing!
One more thing, when plugged in to AC, I can go to the Recovery Mode and then remove the USB cable, the Recovery Mode does stay active on battery power for countless hours. What should I do?
Is it the USB port? Is the battery? Or is it just me?
Oh btw, I did try installing the Stock Update available on Amazon.com and the PC (Windows 8 64-bit) does recognize the phone on ADB mode. Does list the serial of the phone when connected but when side-loading an update via the ADB, it says that it doesn't read! Gives an error. How do I work on that? I did try installing the ADB drivers again but still nothing. Did try downloading the updates from other sites and even a downgraded file, nothing works. What should I do?