Hey guys,
I was just checking to see if anyone notices that after you plug in your device to the PC that you gain access to your files on the device and SD Card but once the phones screen shuts off the device becomes unresponsive on the PC?
Is there an always on feature like there was for the fascinate, or what can I do to stop this from happening?
Mine definitely does not behave that way. Once connected I have access until I disconnect it, regardless of the screen state.
Related
https://www.box.com/s/1e4ee35d587f168cfbfd
https://www.box.com/s/7d0164dcbc096163402e
Anyone?
Also would HTC Desire charger work with it? (the sticks looks same - microUSB, but looks like the phone is not charging)
Also if the phone is dead, is there any way i can check if the battery/screen or whatever else is faulty?
When i connect it under Windows with USB cable, it says that the device cannot be recognized and the drivers cannot be installed.
When connected with USB, i did hold the power button to turn it on but it doesnt start and the phone keeps vibrating continuusly.
Look on the back, or inside, even under battery, for more information.
I already know it's Samsung Galaxy Mini II, homever i have issues turning it on.
All microusb chargers are the same except for amperage. Try all you have. This phone is probably terminally damaged, but try a new battery if possible.
It's really strange (the phone was little wet) homever, sometimes it's starting just fine and sometimes wont turn on at all.
I have removed battery and put it to the bowl with a rice for a night and will see if that helps.
My "dampness" recovery is to disassemble and put phone/tab/laptop in in very low oven ie 125-135 degrees F for several hours. You may have ti turn oven on & off manually to get that low temperature. Your mileage may vary.
OK so basically the phone is in following state:
It's charging fine, homever the biggest problem atm is i cannot get the usb mass storage to work.
I'm connecting it to the PC and the phone is detecting it as AC charger not USB - PC is not even trying to install any drivers.
PC is not detecting the phone at all (phone is detecting that its being connected, the button backlights are lighting up)
I got no dropdown in the phone to select charging, mass storage etc. (when i do it in settings/communication/usb settings it keeps saying to connect the usb cable, but the phone is charging so its connected just fine)
When i was connecting it for the first time windows tried to install drivers but failed, also it was constantly disconnecting the phone from usb cable (now its fine it seems)
When i connect it using "Kies Air" it's working homever i still dont see the SD Card in "My Computer" for example.
What a mess, anyway any idea how to get the USB working again?
Try different cable, and/or different PC.
I ordered new usb cable, homever i doubt it's the problem as the phone is recognizing connection and also it's charging fine.
Hello.
Short story: my phone was a little wet and i have some issues with it, mostly i want to get a mass storage to get working. (cant root)
Basically at first the phone didn't even want to charge, when i connected it to the PC windows was giving me an error that the device cannot be recognized, and couldn't install the drivers. (i had Kies installed)
I dried it completely, now the phone turns on without any problem, when i connect it to the pc the phone is recognizing connection (i hear sound + the button backlights are firing up for a sec)
Homever, windows is not detecting any USB device at all, and in about phone/info it says the phone is connected to the AC instead of USB.
When i connect it with USB there is no dropdown in notification to choose from charging, storage etc.
There is also manual usb storage mounting under settings/communication/usb settings , when i'm trying to mount here it just says to connect the phone with usb cable (not detecting connection, homever the backlight + sound is here after connecting, and it's charging)
I tried connecting it with usb debugging on/off even tried to fiddle with in service menu (*#7284#) but nothing.
And since i cannot get the usb storage working basically i cannot flash anything or root it.
Also the USB cable is not a Samsung but an HTC one, could this be a problem? (people in different thread said those cables are the same so it shouldnt be a problem, same amperage, same stick etc.)
Even tried to install MountUSB Widget from market, but it doesn't work when im trying to start the app it's force closing, when i make widget on desktop and press it the phone just vibrate for 1 sec and nothing happens.
When i connect phone with Kies AIR and it works, i mean it shows the storage information, also recognize the phone model correctly, how much free space i have on internal and on SD card but i cannot click "show in explorer" it's greyed out.
Any experts out there could help me? :crying:
Just a blind guess, try a USB cable which supports your device. If it doesn't help, I'm afraid it's a hardware problem and you will have to consult some hardware expert.
Dead Display, Need my Data
I have a non-rooted verizon Samsung Galaxy S3 (SCH-I535). The display slowly started dying and is totally gone now. No illumination at all. I need to retrieve my data. However, my phone is locked with a PIN. Now what? Without being able to unlock the device I can't just plug it in to my PC and copy over the files. Surely I'm not the only one this has happened to. I don't plan on repairing it unless utterly necessary.
You may be able to use a mouse or keyboard via an OTG cable to enter the pin.
possibly, I have never used one with my device. Will it work the moment I plug it in? Even if I type in the PIN there's still the issue of having to pull down the notification bar and select USB media device to get it to communicate with the PC, otherwise it just mounts the garbage Verizon software.
So I managed to get lucky, or so I thought. I crushed my Z3V yesterday, and the digitizer is stuck constantly inputting touches. I can wait a few seconds, and the screen will unlock itself. However, when I plug my phone into my PC via USB, it keeps trying to show up as a CD drive, and the SD card (that's no longer in the phone.) I can't get ADB or the Xperia PC program to detect the phone. It's showing up as a mass storage device, but I can't access the internal storage still. I'm thinking it's a PC driver issue, but I wanted to ask here if there was anything else I should try, or if anyone else had encountered this before. USB Debugging is OFF on the phone. Once the screen unlocks itself, it randomly touches everything until it gets to a screen with no touch inputs on it. (it's currently sitting at the emergency alerts screen lol.
coltman151 said:
So I managed to get lucky, or so I thought. I crushed my Z3V yesterday, and the digitizer is stuck constantly inputting touches. I can wait a few seconds, and the screen will unlock itself. However, when I plug my phone into my PC via USB, it keeps trying to show up as a CD drive, and the SD card (that's no longer in the phone.) I can't get ADB or the Xperia PC program to detect the phone. It's showing up as a mass storage device, but I can't access the internal storage still. I'm thinking it's a PC driver issue, but I wanted to ask here if there was anything else I should try, or if anyone else had encountered this before. USB Debugging is OFF on the phone. Once the screen unlocks itself, it randomly touches everything until it gets to a screen with no touch inputs on it. (it's currently sitting at the emergency alerts screen lol.
Click to expand...
Click to collapse
If you can get an to work, you can disable touch input and use the hardware keys or a mouse to make selections.
Sent from my SM-S903VL using Tapatalk
SOLVED: S7 dropped > broken screen > how to recover images? Not rooted,not "usb mode"
So my wife dropped S7 to the floor and device ended up to be fully powered, but screen is now all black. Back and "software" button illuminates. I can change volume. I can take photos. So phone works, but screen is all black. Main concern is to have photos out from the phone. Contacts are synced, software etc. can be installed to new phone.
Kies finds the phone, but says that is' locked. Although phone does not have any passcodes or fingerprint, Kies cannot access to photos. Also the PC does see the device, but it won't allow me to see the contents. Find My Mobile is not activated, I think that I can't activate it now without phone. Also Smart Switch says that phone is locked. Phone settings are pretty much as out from the box. USB debugging is off, Developper options off, etc...
But I found that possible via ABD (?) I could access phone storage. Is it so? I sould start the phone to Recovery Mode / Download Mode? How to do that? Normally the phone is on and I can't switch it off. I can only soft reset is by keeping vol- + power buttons pressed for 10sec. But after that, phone just restarts to OS.
Please give hints how to proceed. What to try. New LCD is around 50USD and takes forever to get from Aliexpress/Ebay.
Why not use an external display? Hook it up to the USB-connector via an adaptor and it should work to unlock the phone using a PC-mouse.
gedhe said:
Why not use an external display? Hook it up to the USB-connector via an adaptor and it should work to unlock the phone using a PC-mouse.
Click to expand...
Click to collapse
O, it has such feature? Quick googling did not help how to do it. How does it work? Do I need some cable or device?
Any ideas how to proceed? I either can reboot device to Recovery mode and use ADB or connect external display to the device. Or if someone has any better solution
Please help. Family photos are in the phone
Try to unlock your lock screen with a usb mouse connected via otg and swiping up with the mouse. Then connect it to the computer and try to backup your data with kies or switch.
Tried many thing how to allow the connection from another phone or computer. However it was not possible to connect, so I ordered a new screen. Once new screen installed, it was not even a challenge Ordered new screen from Aliexpress.