Database Info

All Firmwares For SM-N900

ALL FIRMWARES FOR SM-N900
HOW TO FLASH FIRMWARE USING ODIN
Step 1: Extract the downloaded files on your PC
Step 2: Power Off The Phone and Press and Hold the Volume Down + Home + Power buttons See The warning mesage and press the volume up button see the download mode
Step 3: Install Usb drivers on Pc "without drivers not working"
Step 4: connect a device to PC via USB cable and open the odin see the box message show "added" your device detect successfully
Step 5: select the Files you download and click the start now wait for flashing message Show "pass" your device successfully flash
Step 6 : Go to recovery mode Tap "factory reset,wipe data" and reboot a phone now phone successfully flashed
Download Firmwares : Here
Odin : Here
Drivers : Here
HITS THANKS BUTTON IF I HELPED :good:

[HYVE] [Buzz BU01] [GUIDE] Root, Unlock Bootloader & Install TWRP recovery

Disclaimer
Your warranty may void! Backup your data!
Rooting and unlocking bootloader may void your warranty. Although it is properly tested on the device, if this guide cause any damage or data loss to your device then, I will not responsible for that. Always backup your data first to avoid any issues.
Hello everyone,
By this guide you can root and unlock bootloader of recently launched device in India i.e; Hyve Buzz (BU01). I will tell you how we can install TWRP recovery and by using it we can easily root the device. There are 2 methods for installing TWRP recovery, both are explained below. You can follow any method according to your need. These are not just one click solutions so, I am assuming that you have some prior knowledge of rooting and unlocking. If you don't know anything about this then, it's better to try after reading some threads at XDA explaining about rooting and unlocking. I will add un-rooting/restoring process in the next thread.
Install TWRP Recovery
Download "Root/Unlock package" from downloads section and extract. It contains following files: -
- "MT6753_Android_scatter.txt" for SP Flash Tool scatter loading.
- "recovery.img", customised TWRP recovery.
- "recovery-stock.img", stock recovery if you want to restore.
Method 1 (Windows Only)
Flash recovery via SP Flash Tool.
1. Open SP Flash Tool and under "Download" tab select, "Scatter-loading".
2. Select "MT6753_Android_scatter.txt" from the extracted files. It will load all the files.
3. Uncheck all the items below and select only "recovery".
4. Click on "Download" button at the top.
5. Turn off the device and connect it to the USB and it will start flashing the recovery.
6. "Download OK" dialog will appear.
7. Turn on your device and finish the boot process. Now, you can proceed to rooting process.
Method 2 (Windows/LINUX/OS X)
Unlock bootloader and flash recovery via fastboot. ADB/Fastboot must be installed and working. You can check other XDA threads to install.
1. Go to Settings > About phone > Tap on "Build number" 7 times. It will unlock "Developer options".
2. Now, go to Settings > Developer options.
3. Enable "OEM unlocking" and "USB debugging".
4. Run the below command in terminal/cmd to reboot into bootloader mode: -
Code:
adb reboot bootloader
6. "FASTBOOT mode" will appear at the bottom left corner of the screen, run the following command and follow on-screen instructions to unlock bootloader: -
Code:
fastboot oem unlock
Press "Volume Up" button to proceed (Data will be wiped due to security reasons).
7. Now, press "Power", "Volume Up" and "Volume Down" buttons together to turn off the device.
8. Now, again boot into Fastboot mode by following the below instructions and run the below command to install TWRP recovery.
Code:
fastboot flash recovery recovery.img
9. Again, press "Power", "Volume Up" and "Volume Down" buttons together to turn off the device.
10. Turn on your device and finish the boot process. Now, you can proceed to rooting process.
Boot into Recovery/Fastboot
1. Turn off the device and wait for 2-3 seconds.
2. Press and Hold "Power + Volume Up" buttons until screen turns on.
3. Use "Volume Up" button to select options (Recovery, Fastboot or Normal).
4. Press "Volume Down" button to OK. If "Recovery" is selected then, follow the steps below.
5. Wait until Android logo (lying down) appears on the screen.
6. Press and Hold "Power" button for 1-2 secs and then, press "Volume Up" button while holding the "Power" button.
7. Device will boot into recovery.
Click to expand...
Click to collapse
Rooting
1. Install TWRP recovery by following any of the above methods.
2. Download "SuperSU TWRP Installable zip" from downloads section. You can visit XDA thread here.
3. Copy zip in your device or SD card and boot into recovery by following the above instructions.
4. Select "Install" and find your zip that you have copied in the previous step.
5. Click on the zip and "Swipe to confirm Flash".
6. It will automatically root the device and SuperSU (to manage/grant root permissions) will be installed.
7. Reboot system and start tweaking your rooted device.
Click to expand...
Click to collapse
Downloads
Root/Unlock Package
SuperSU TWRP Installable zip
Click to expand...
Click to collapse
Credits
- SP Flash Tool
- TWRP
- SuperSU

Reserved!

Do we have 7.0 rom for hyve buzz
Hyve buzz is getting monotonous, as there is no official
Update, also not any support, anywhere on web. Could you please help me with 7.0 rom update.

Huve pryme 01 hard bricked
My hyve pryme 01 got hard bricked and don't have backup of rom and also don't have have scatter file .
I searched on the internet for rom and scatter and I found stock rom but still not found scatter file if any one have solution for me please help me
Hyve pryme 01 has mediatek Helio x20 processor (mt6797)
4 gb ram
32 gb internal storage
If any know solution please help me
Sorry for bad english and grammar.

pvirahyas said:
My hyve pryme 01 got hard bricked and don't have backup of rom and also don't have have scatter file .
I searched on the internet for rom and scatter and I found stock rom but still not found scatter file if any one have solution for me please help me
Hyve pryme 01 has mediatek Helio x20 processor (mt6797)
4 gb ram
32 gb internal storage
If any know solution please help me
Sorry for bad english and grammar.
Click to expand...
Click to collapse
This is the official ROM for HYVE Pryme 01. Please download and install at your own risk:
HYVE-PRYME01-HMRE90B
Click to expand...
Click to collapse

Pranav Pandey said:
This is the official ROM for HYVE Pryme 01. Please download and install at your own risk:
Click to expand...
Click to collapse
I have ROM I just need scatter to flash it.

Pranav Pandey said:
This is the official ROM for HYVE Pryme 01. Please download and install at your own risk:
Click to expand...
Click to collapse
The ROM you maintained is with or without scatter file?

How to downgrade from 7.1.1 to 6.0 ?

Hello
I've been having many issues with my Z5 after upgrading to 7.1.1 , can you tell me how to get Android M back ? I'm new to sony devices and I don't know what to do.
Thank you

You have to downlad a program called "Flashtool" and the correct ftf firmware file for your Z5...
The newest Marshmallow build ends with 5.11 and you can download with a integrated program XperiFirm...
http://www.flashtool.net/downloads.php
install flashtool
install the flashtool drivers /Flashtool Installation Folder/drivers/Flashtool-drivers.exe
open flashtool or flashtool64 (for 64 bit systems)
click the XF icon
select your model from the device list, then search for your a ftf with your region (I always use "Customized AU" even though I don't live in Australia...)
downlaod it
then close XperiaFirm and press the "flash" icon
flashmode has to be selected, press OK
select your ftf file you've just downloaded
tick everything to wipe (APPS_LOG, DIAG, PERSIST, SSD, USERDATA)
ticking USERDATA will reset the phone which is recommended for downgrades but not needed for upgrading
press flash and now connect your xperia via flashmode
(turn off the phone, while connecting it to your pc keep holding VOLUME DOWN until the phone is recognised and a green light appears!
wait until the process is finished (flashing system takes a while)
unplug it
power it on
done

freaky2xd said:
You have to downlad a program called "Flashtool" and the correct ftf firmware file for your Z5...
The newest Marshmallow build ends with 5.11 and you can download with a integrated program XperiFirm...
http://www.flashtool.net/downloads.php
install flashtool
install the flashtool drivers /Flashtool Installation Folder/drivers/Flashtool-drivers.exe
open flashtool or flashtool64 (for 64 bit systems)
click the XF icon
select your model from the device list, then search for your a ftf with your region (I always use "Customized AU" even though I don't live in Australia...)
downlaod it
then close XperiaFirm and press the "flash" icon
flashmode has to be selected, press OK
select your ftf file you've just downloaded
tick everything to wipe (APPS_LOG, DIAG, PERSIST, SSD, USERDATA)
ticking USERDATA will reset the phone which is recommended for downgrades but not needed for upgrading
press flash and now connect your xperia via flashmode
(turn off the phone, while connecting it to your pc keep holding VOLUME DOWN until the phone is recognised and a green light appears!
wait until the process is finished (flashing system takes a while)
unplug it
power it on
done
Click to expand...
Click to collapse
You don't have to wipe ssd, which is storage.

hi, do I need to download something else than the flash tool to downgrade from nougat to mm?

El Solido said:
You don't have to wipe ssd, which is storage.
Click to expand...
Click to collapse
true but if you downgrade u definetly should

freaky2xd said:
true but if you downgrade u definetly should
Click to expand...
Click to collapse
But you will lose pictures music and that. It is not necesarry.

freaky2xd said:
You have to downlad a program called "Flashtool" and the correct ftf firmware file for your Z5...
The newest Marshmallow build ends with 5.11 and you can download with a integrated program XperiFirm...
http://www.flashtool.net/downloads.php
install flashtool
install the flashtool drivers /Flashtool Installation Folder/drivers/Flashtool-drivers.exe
open flashtool or flashtool64 (for 64 bit systems)
click the XF icon
select your model from the device list, then search for your a ftf with your region (I always use "Customized AU" even though I don't live in Australia...)
downlaod it
then close XperiaFirm and press the "flash" icon
flashmode has to be selected, press OK
select your ftf file you've just downloaded
tick everything to wipe (APPS_LOG, DIAG, PERSIST, SSD, USERDATA)
ticking USERDATA will reset the phone which is recommended for downgrades but not needed for upgrading
press flash and now connect your xperia via flashmode
(turn off the phone, while connecting it to your pc keep holding VOLUME DOWN until the phone is recognised and a green light appears!
wait until the process is finished (flashing system takes a while)
unplug it
power it on
done
Click to expand...
Click to collapse
when I tries to do that, first I got a driver problem , after solving it , my device started restarting automatically whenever the flash is about to start

DEEADLY said:
when I tries to do that, first I got a driver problem , after solving it , my device started restarting automatically whenever the flash is about to start
Click to expand...
Click to collapse
Install the Xperia companion program for the PC, plug your device in normal mode without turning it off, let the drivers install (you'll get a notification in the task bar), after it's done, unplug and then connect your phone in flash mode (hold the volume down and then connect it), let the drivers install, when done, unplug and replug it in fastboot mode (hold the volume UP then connect it), let the drivers install for one more time.
Now disconnect it, open your flashtool program, load the FTF file, tick the boxes in Wipe, including SSD if you don't mind getting your data erases (I recommend erasing your data but make a backup first!), Then click start flashing, when the flash tool asks you to connect your device, hold the volume DOWN then plug it, a green LED should light up and it should start flashing your device.

The right way to show OEM Unlocking in Galaxy A11 SM-A115U

I tried all the normal ways to show OEM unlocking in SM-A115U but nothing worked. However, the right way to show OEM is to flash SM-A115U1 Stock rom.
It's kind of risky so I'm not responsible for any damages.
Steps:
1. Download and install samsung drivers from this link
1. Download SM-A115U1 Latest stock rom from Sammobile website or any other trusted website.
2. Go to this thread and download one of the Patched Odins (for me, I used Odin3 v3.14.1_3B_PatcheD)
3. Extract the SM-A115U1 rom files and select them with Odin BL, AP, CP, and CSC.
4. Put your phone on Download mode by powering off first. Then Hold Power + Volume Up + Volume down and release power when the phone vibrates.
5. You will see warning screen, press on volume up to get into download mode
6. Plug your phone to the PC and click on start in Odin
The process will take some time then your phone will reboot and then you should see OEM Unlocking option in developer options.

How To Guide Rooting latest Firmware Issues Work-around (Tested by me on SM-A536B/DS)

As you know, to whoever updated to the latest firmware A536BXXU4CWB1, trying to install TWRP results in a bootloop, this happens due to some SEPolicy issues, furthermore, please wait until the TWRP mainter (Afaneh) gets his hands on the new kernel sources and patches it up to work with One UI 5.1
(I am not responsible for bricked devices after you follow this guide, this was tested by me and confirmed to work on the SM-A536B/DS Variant of the A53)
To those interested in rooting the latest firmware without twrp here is a little guide I made:
(Assuming your bootloader is unlocked)
Step 1:
Visit SamFW Website and grab the latest firmware for your device
Link for A536B
Step 2:
On your phone, go to this GitHub Page and download the latest Magisk Apk on your phone
Step 3: On the device you downloaded your firmware (ex: your phone or pc), extract the files inside and move the extracted AP file and move it on your A53
Step 3: Open up Magisk on your phone, select install, then select your AP file and patch it.
Step 4: After its done patching, rename the file to whatever you want then move it to your pc and open up odin. (Odin Download Link)
Step 5: After you've opened up odin hit the AP button and select your patched AP file you transfered from your phone, then connect your phone to the PC using a USB cable.
Step 6: Power off your phone then power it back on while holding both POWER button and VOLUME UP button, once you reached the Samsung logo let go of the POWER button.
Step 7: You're in recovery mode now, use your volume buttons to scroll down and select Reboot To Bootloader, hit power button then you will be sent to Odin Mode (Download Mode or some call it Bootloader)
Step 8: Your phone is now ready to flash the rooted firmware, make sure your USB cable is properly connected to your PC, in Odin make sure your patched AP is loaded in the AP slot, then click the START button.
!! This will take a few minutes, don't panick, once its done the phone will safely reboot to the OS and you will have root available on your phone, make sure once you've passed the Phone Setup, you go to the linked github page and download magisk apk again and install it !!

This applies to almost all Samsung phones from 2018 to 2023.

If you just flash the modified AP file to root your device without selecting CP, BL or CSC, ODIN could shrink the /data partition doesn't it?

ThugMaster said:
If you just flash the modified AP file to root your device without selecting CP, BL or CSC, ODIN could shrink the /data partition doesn't it?
Click to expand...
Click to collapse
I forgot that, good point.

TringQuack said:
I forgot that, good point.
Click to expand...
Click to collapse
When it shrinks what happens?

tell me please, if I root my a536b and if I add in
others.xml <CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
am I going to get the native call recording?

Wrong thread.

Datbro said:
When it shrinks what happens?
Click to expand...
Click to collapse
No response?

Datbro said:
No response?
Click to expand...
Click to collapse
you loose a little bit of storage, its fixable by flashing csc file in odin alongside the patched AP file

How do I get full write permissions? So that I e.g. in the file system/build.prop what can change? I have the latest rom update on it.

TringQuack said:
As you know, to whoever updated to the latest firmware A536BXXU4CWB1, trying to install TWRP results in a bootloop, this happens due to some SEPolicy issues, furthermore, please wait until the TWRP mainter (Afaneh) gets his hands on the new kernel sources and patches it up to work with One UI 5.1
(I am not responsible for bricked devices after you follow this guide, this was tested by me and confirmed to work on the SM-A536B/DS Variant of the A53)
To those interested in rooting the latest firmware without twrp here is a little guide I made:
(Assuming your bootloader is unlocked)
Step 1:
Visit SamFW Website and grab the latest firmware for your device
Link for A536B
Step 2:
On your phone, go to this GitHub Page and download the latest Magisk Apk on your phone
Step 3: On the device you downloaded your firmware (ex: your phone or pc), extract the files inside and move the extracted AP file and move it on your A53
Step 3: Open up Magisk on your phone, select install, then select your AP file and patch it.
Step 4: After its done patching, rename the file to whatever you want then move it to your pc and open up odin. (Odin Download Link)
Step 5: After you've opened up odin hit the AP button and select your patched AP file you transfered from your phone, then connect your phone to the PC using a USB cable.
Step 6: Power off your phone then power it back on while holding both POWER button and VOLUME UP button, once you reached the Samsung logo let go of the POWER button.
Step 7: You're in recovery mode now, use your volume buttons to scroll down and select Reboot To Bootloader, hit power button then you will be sent to Odin Mode (Download Mode or some call it Bootloader)
Step 8: Your phone is now ready to flash the rooted firmware, make sure your USB cable is properly connected to your PC, in Odin make sure your patched AP is loaded in the AP slot, then click the START button.
!! This will take a few minutes, don't panick, once its done the phone will safely reboot to the OS and you will have root available on your phone, make sure once you've passed the Phone Setup, you go to the linked github page and download magisk apk again and install it !!
Click to expand...
Click to collapse
TringQuack said:
As you know, to whoever updated to the latest firmware A536BXXU4CWB1, trying to install TWRP results in a bootloop, this happens due to some SEPolicy issues, furthermore, please wait until the TWRP mainter (Afaneh) gets his hands on the new kernel sources and patches it up to work with One UI 5.1
(I am not responsible for bricked devices after you follow this guide, this was tested by me and confirmed to work on the SM-A536B/DS Variant of the A53)
To those interested in rooting the latest firmware without twrp here is a little guide I made:
(Assuming your bootloader is unlocked)
Step 1:
Visit SamFW Website and grab the latest firmware for your device
Link for A536B
Step 2:
On your phone, go to this GitHub Page and download the latest Magisk Apk on your phone
Step 3: On the device you downloaded your firmware (ex: your phone or pc), extract the files inside and move the extracted AP file and move it on your A53
Step 3: Open up Magisk on your phone, select install, then select your AP file and patch it.
Step 4: After its done patching, rename the file to whatever you want then move it to your pc and open up odin. (Odin Download Link)
Step 5: After you've opened up odin hit the AP button and select your patched AP file you transfered from your phone, then connect your phone to the PC using a USB cable.
Step 6: Power off your phone then power it back on while holding both POWER button and VOLUME UP button, once you reached the Samsung logo let go of the POWER button.
Step 7: You're in recovery mode now, use your volume buttons to scroll down and select Reboot To Bootloader, hit power button then you will be sent to Odin Mode (Download Mode or some call it Bootloader)
Step 8: Your phone is now ready to flash the rooted firmware, make sure your USB cable is properly connected to your PC, in Odin make sure your patched AP is loaded in the AP slot, then click the START button.
!! This will take a few minutes, don't panick, once its done the phone will safely reboot to the OS and you will have root available on your phone, make sure once you've passed the Phone Setup, you go to the linked github page and download magisk apk again and install it !!
Click to expand...
Click to collapse
Hi Can you help me unlock my Samsung A53 5g which is stuck on a pattern without losing my data that recover so much ????

FKL2000 said:
Hi Can you help me unlock my Samsung A53 5g which is stuck on a pattern without losing my data that recover so much ????
Click to expand...
Click to collapse
??? Isn't there a way?? In short if there is no way please tell me

There is a way. Search the forum for TWRP for A53 or search Telegram for Samsung galaxy A53 you'll see it there too.