ALL FIRMWARES FOR SM-N900
HOW TO FLASH FIRMWARE USING ODIN
Step 1: Extract the downloaded files on your PC
Step 2: Power Off The Phone and Press and Hold the Volume Down + Home + Power buttons See The warning mesage and press the volume up button see the download mode
Step 3: Install Usb drivers on Pc "without drivers not working"
Step 4: connect a device to PC via USB cable and open the odin see the box message show "added" your device detect successfully
Step 5: select the Files you download and click the start now wait for flashing message Show "pass" your device successfully flash
Step 6 : Go to recovery mode Tap "factory reset,wipe data" and reboot a phone now phone successfully flashed
Download Firmwares : Here
Odin : Here
Drivers : Here
HITS THANKS BUTTON IF I HELPED :good:
Thread Closed
How is linking to sammobile with basic flash instructions development? If you want to host the files fine, but we don't need members just linking to stock ROMs and posting in Dev.
My Yuphoria is bricked but I have a twrp backup. The problem is it doesnt go into recovery mode with hardware keys. For previously going to recovery mode I used rashr.apk but stuck on bootloop. So what to restore backup but cant boot to recovery..someone help??
Try these steps
Extract the flashtools zip in a new folder on the desktop.
Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
The command window will automatically close once the procedure is completed.
Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Hello
I've been having many issues with my Z5 after upgrading to 7.1.1 , can you tell me how to get Android M back ? I'm new to sony devices and I don't know what to do.
Thank you
You have to downlad a program called "Flashtool" and the correct ftf firmware file for your Z5...
The newest Marshmallow build ends with 5.11 and you can download with a integrated program XperiFirm...
http://www.flashtool.net/downloads.php
install flashtool
install the flashtool drivers /Flashtool Installation Folder/drivers/Flashtool-drivers.exe
open flashtool or flashtool64 (for 64 bit systems)
click the XF icon
select your model from the device list, then search for your a ftf with your region (I always use "Customized AU" even though I don't live in Australia...)
downlaod it
then close XperiaFirm and press the "flash" icon
flashmode has to be selected, press OK
select your ftf file you've just downloaded
tick everything to wipe (APPS_LOG, DIAG, PERSIST, SSD, USERDATA)
ticking USERDATA will reset the phone which is recommended for downgrades but not needed for upgrading
press flash and now connect your xperia via flashmode
(turn off the phone, while connecting it to your pc keep holding VOLUME DOWN until the phone is recognised and a green light appears!
wait until the process is finished (flashing system takes a while)
unplug it
power it on
done
freaky2xd said:
You have to downlad a program called "Flashtool" and the correct ftf firmware file for your Z5...
The newest Marshmallow build ends with 5.11 and you can download with a integrated program XperiFirm...
http://www.flashtool.net/downloads.php
install flashtool
install the flashtool drivers /Flashtool Installation Folder/drivers/Flashtool-drivers.exe
open flashtool or flashtool64 (for 64 bit systems)
click the XF icon
select your model from the device list, then search for your a ftf with your region (I always use "Customized AU" even though I don't live in Australia...)
downlaod it
then close XperiaFirm and press the "flash" icon
flashmode has to be selected, press OK
select your ftf file you've just downloaded
tick everything to wipe (APPS_LOG, DIAG, PERSIST, SSD, USERDATA)
ticking USERDATA will reset the phone which is recommended for downgrades but not needed for upgrading
press flash and now connect your xperia via flashmode
(turn off the phone, while connecting it to your pc keep holding VOLUME DOWN until the phone is recognised and a green light appears!
wait until the process is finished (flashing system takes a while)
unplug it
power it on
done
Click to expand...
Click to collapse
You don't have to wipe ssd, which is storage.
hi, do I need to download something else than the flash tool to downgrade from nougat to mm?
El Solido said:
You don't have to wipe ssd, which is storage.
Click to expand...
Click to collapse
true but if you downgrade u definetly should
freaky2xd said:
true but if you downgrade u definetly should
Click to expand...
Click to collapse
But you will lose pictures music and that. It is not necesarry.
freaky2xd said:
You have to downlad a program called "Flashtool" and the correct ftf firmware file for your Z5...
The newest Marshmallow build ends with 5.11 and you can download with a integrated program XperiFirm...
http://www.flashtool.net/downloads.php
install flashtool
install the flashtool drivers /Flashtool Installation Folder/drivers/Flashtool-drivers.exe
open flashtool or flashtool64 (for 64 bit systems)
click the XF icon
select your model from the device list, then search for your a ftf with your region (I always use "Customized AU" even though I don't live in Australia...)
downlaod it
then close XperiaFirm and press the "flash" icon
flashmode has to be selected, press OK
select your ftf file you've just downloaded
tick everything to wipe (APPS_LOG, DIAG, PERSIST, SSD, USERDATA)
ticking USERDATA will reset the phone which is recommended for downgrades but not needed for upgrading
press flash and now connect your xperia via flashmode
(turn off the phone, while connecting it to your pc keep holding VOLUME DOWN until the phone is recognised and a green light appears!
wait until the process is finished (flashing system takes a while)
unplug it
power it on
done
Click to expand...
Click to collapse
when I tries to do that, first I got a driver problem , after solving it , my device started restarting automatically whenever the flash is about to start
DEEADLY said:
when I tries to do that, first I got a driver problem , after solving it , my device started restarting automatically whenever the flash is about to start
Click to expand...
Click to collapse
Install the Xperia companion program for the PC, plug your device in normal mode without turning it off, let the drivers install (you'll get a notification in the task bar), after it's done, unplug and then connect your phone in flash mode (hold the volume down and then connect it), let the drivers install, when done, unplug and replug it in fastboot mode (hold the volume UP then connect it), let the drivers install for one more time.
Now disconnect it, open your flashtool program, load the FTF file, tick the boxes in Wipe, including SSD if you don't mind getting your data erases (I recommend erasing your data but make a backup first!), Then click start flashing, when the flash tool asks you to connect your device, hold the volume DOWN then plug it, a green LED should light up and it should start flashing your device.
I tried all the normal ways to show OEM unlocking in SM-A115U but nothing worked. However, the right way to show OEM is to flash SM-A115U1 Stock rom.
It's kind of risky so I'm not responsible for any damages.
Steps:
1. Download and install samsung drivers from this link
1. Download SM-A115U1 Latest stock rom from Sammobile website or any other trusted website.
2. Go to this thread and download one of the Patched Odins (for me, I used Odin3 v3.14.1_3B_PatcheD)
3. Extract the SM-A115U1 rom files and select them with Odin BL, AP, CP, and CSC.
4. Put your phone on Download mode by powering off first. Then Hold Power + Volume Up + Volume down and release power when the phone vibrates.
5. You will see warning screen, press on volume up to get into download mode
6. Plug your phone to the PC and click on start in Odin
The process will take some time then your phone will reboot and then you should see OEM Unlocking option in developer options.
As you know, to whoever updated to the latest firmware A536BXXU4CWB1, trying to install TWRP results in a bootloop, this happens due to some SEPolicy issues, furthermore, please wait until the TWRP mainter (Afaneh) gets his hands on the new kernel sources and patches it up to work with One UI 5.1
(I am not responsible for bricked devices after you follow this guide, this was tested by me and confirmed to work on the SM-A536B/DS Variant of the A53)
To those interested in rooting the latest firmware without twrp here is a little guide I made:
(Assuming your bootloader is unlocked)
Step 1:
Visit SamFW Website and grab the latest firmware for your device
Link for A536B
Step 2:
On your phone, go to this GitHub Page and download the latest Magisk Apk on your phone
Step 3: On the device you downloaded your firmware (ex: your phone or pc), extract the files inside and move the extracted AP file and move it on your A53
Step 3: Open up Magisk on your phone, select install, then select your AP file and patch it.
Step 4: After its done patching, rename the file to whatever you want then move it to your pc and open up odin. (Odin Download Link)
Step 5: After you've opened up odin hit the AP button and select your patched AP file you transfered from your phone, then connect your phone to the PC using a USB cable.
Step 6: Power off your phone then power it back on while holding both POWER button and VOLUME UP button, once you reached the Samsung logo let go of the POWER button.
Step 7: You're in recovery mode now, use your volume buttons to scroll down and select Reboot To Bootloader, hit power button then you will be sent to Odin Mode (Download Mode or some call it Bootloader)
Step 8: Your phone is now ready to flash the rooted firmware, make sure your USB cable is properly connected to your PC, in Odin make sure your patched AP is loaded in the AP slot, then click the START button.
!! This will take a few minutes, don't panick, once its done the phone will safely reboot to the OS and you will have root available on your phone, make sure once you've passed the Phone Setup, you go to the linked github page and download magisk apk again and install it !!
This applies to almost all Samsung phones from 2018 to 2023.
If you just flash the modified AP file to root your device without selecting CP, BL or CSC, ODIN could shrink the /data partition doesn't it?
ThugMaster said:
If you just flash the modified AP file to root your device without selecting CP, BL or CSC, ODIN could shrink the /data partition doesn't it?
Click to expand...
Click to collapse
I forgot that, good point.
TringQuack said:
I forgot that, good point.
Click to expand...
Click to collapse
When it shrinks what happens?
tell me please, if I root my a536b and if I add in
others.xml <CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
am I going to get the native call recording?
Wrong thread.
Datbro said:
When it shrinks what happens?
Click to expand...
Click to collapse
No response?
Datbro said:
No response?
Click to expand...
Click to collapse
you loose a little bit of storage, its fixable by flashing csc file in odin alongside the patched AP file
How do I get full write permissions? So that I e.g. in the file system/build.prop what can change? I have the latest rom update on it.
TringQuack said:
As you know, to whoever updated to the latest firmware A536BXXU4CWB1, trying to install TWRP results in a bootloop, this happens due to some SEPolicy issues, furthermore, please wait until the TWRP mainter (Afaneh) gets his hands on the new kernel sources and patches it up to work with One UI 5.1
(I am not responsible for bricked devices after you follow this guide, this was tested by me and confirmed to work on the SM-A536B/DS Variant of the A53)
To those interested in rooting the latest firmware without twrp here is a little guide I made:
(Assuming your bootloader is unlocked)
Step 1:
Visit SamFW Website and grab the latest firmware for your device
Link for A536B
Step 2:
On your phone, go to this GitHub Page and download the latest Magisk Apk on your phone
Step 3: On the device you downloaded your firmware (ex: your phone or pc), extract the files inside and move the extracted AP file and move it on your A53
Step 3: Open up Magisk on your phone, select install, then select your AP file and patch it.
Step 4: After its done patching, rename the file to whatever you want then move it to your pc and open up odin. (Odin Download Link)
Step 5: After you've opened up odin hit the AP button and select your patched AP file you transfered from your phone, then connect your phone to the PC using a USB cable.
Step 6: Power off your phone then power it back on while holding both POWER button and VOLUME UP button, once you reached the Samsung logo let go of the POWER button.
Step 7: You're in recovery mode now, use your volume buttons to scroll down and select Reboot To Bootloader, hit power button then you will be sent to Odin Mode (Download Mode or some call it Bootloader)
Step 8: Your phone is now ready to flash the rooted firmware, make sure your USB cable is properly connected to your PC, in Odin make sure your patched AP is loaded in the AP slot, then click the START button.
!! This will take a few minutes, don't panick, once its done the phone will safely reboot to the OS and you will have root available on your phone, make sure once you've passed the Phone Setup, you go to the linked github page and download magisk apk again and install it !!
Click to expand...
Click to collapse
TringQuack said:
As you know, to whoever updated to the latest firmware A536BXXU4CWB1, trying to install TWRP results in a bootloop, this happens due to some SEPolicy issues, furthermore, please wait until the TWRP mainter (Afaneh) gets his hands on the new kernel sources and patches it up to work with One UI 5.1
(I am not responsible for bricked devices after you follow this guide, this was tested by me and confirmed to work on the SM-A536B/DS Variant of the A53)
To those interested in rooting the latest firmware without twrp here is a little guide I made:
(Assuming your bootloader is unlocked)
Step 1:
Visit SamFW Website and grab the latest firmware for your device
Link for A536B
Step 2:
On your phone, go to this GitHub Page and download the latest Magisk Apk on your phone
Step 3: On the device you downloaded your firmware (ex: your phone or pc), extract the files inside and move the extracted AP file and move it on your A53
Step 3: Open up Magisk on your phone, select install, then select your AP file and patch it.
Step 4: After its done patching, rename the file to whatever you want then move it to your pc and open up odin. (Odin Download Link)
Step 5: After you've opened up odin hit the AP button and select your patched AP file you transfered from your phone, then connect your phone to the PC using a USB cable.
Step 6: Power off your phone then power it back on while holding both POWER button and VOLUME UP button, once you reached the Samsung logo let go of the POWER button.
Step 7: You're in recovery mode now, use your volume buttons to scroll down and select Reboot To Bootloader, hit power button then you will be sent to Odin Mode (Download Mode or some call it Bootloader)
Step 8: Your phone is now ready to flash the rooted firmware, make sure your USB cable is properly connected to your PC, in Odin make sure your patched AP is loaded in the AP slot, then click the START button.
!! This will take a few minutes, don't panick, once its done the phone will safely reboot to the OS and you will have root available on your phone, make sure once you've passed the Phone Setup, you go to the linked github page and download magisk apk again and install it !!
Click to expand...
Click to collapse
Hi Can you help me unlock my Samsung A53 5g which is stuck on a pattern without losing my data that recover so much ????
FKL2000 said:
Hi Can you help me unlock my Samsung A53 5g which is stuck on a pattern without losing my data that recover so much ????
Click to expand...
Click to collapse
??? Isn't there a way?? In short if there is no way please tell me
There is a way. Search the forum for TWRP for A53 or search Telegram for Samsung galaxy A53 you'll see it there too.