Database Info

Motorola XT910 Bricked

good afternoon forum Mods if I'm posting in the wrong section I'm sorry and move where it should be post it at I couldn't find a way to open a new thread under Motorola all I was able to see was threads already posted
any way I'm in desperately need of help I have this Motorola XT910 which one was working just fine the only problem that it had was the wifi and bluetooth wouldn't turn on it's a LATAM device and it had 4.1.2 I don't know who updated to this version or how that's all I could see under about phone it has bootloader locked I couldn't tell you if it was root don't really remember I only had it for a couple hrs and decided to flash a different rom to see if the wifi and bluetooh option would be available
this is what I done to the phone so far i'm gonna start from when it was working
I install BMM and I follow all the instructions just like in this post http://forum.xda-developers.com/showthread.php?t=2260951 but phone never booted normally it just got stock on this screen with a gear looking wheel turning I did a back up of my system but could never go to it all i remember being able to go to was this screen on BMM where you can chose what system you want to boot but all I see was artmod rom and all the other system windows were empty so i was just stuck between this screen the gear wheel trying to boot the system and the screen where i could chose the system i wanted to boot into
no help there so battery was low so i removed it charged it with a universal charger over night boot into AP Fastboot and trying flashing the 3 folowing roms with RSD Lite 6.1.4 but every rom gives me the same error message CDT.BIN failed phone return fail
these are the roms i'm trying to flash
Branding: Retail Brazil
Version:9.8.2O-124_SPUL-17 Service
Android Version:4.1.2
with RSD Lite 6.1.4
Branding: Oi Brazil
Version:9.8.2O-124_SPUL-17 Service
Android Version:4.1.2
with RSD Lite 6.1.4
and one from UK with version 4.1.2 as well and no go also i have tried this flash tool HSD-pilots UNBRICK but always gives me error message when trying to flash the booteujb.img file i tried doing directely and as follow
1) download These fastboot files.rar (clink on text)
2)download retailEU. jellybean OTA
3)Download HSD-pilots UNBRICK.rar
4)UNRAR HSD-pilots UNBRICK.rar from step (3) to any new folder (lets name it UNBRICK)
5) UNRAR Fastboot files:
cdrom_signed
cdt.bin_signed
devtree_signed
ebr_signed
mbr_signed
recovery_signed
radio.img
system_signed
from step (1) to Folder from step (4) we named UNBRICK ONLY extract files i said
6)Connect your device to pc
7)open UNBRICK folder Hold shift and right click on white space -> then press OPEN COMMAND WINDOW HERE
8)flash files from step (5) by writing in the command window you opened:
mfastboot flash cdrom cdrom_signed
mfastboot flash cdt.bin cdt.bin_signed
mfastboot flash devtree devtree_signed
mfastboot flash ebr ebr_signed
mfastboot flash mbr mbr_signed
mfastboot flash recovery recovery_signed
mfastboot flash radio radio.img
9)with the phone still connected to PC open UNBRICK folder and tun Unbrick.bat.
10) after unbrick.rar flashed press power button once, and immediately hold volume up + volume down and press power again
11) go down to recovery and press volume up
12) when you just follow instructions in bat file. see android picture press volume down and volume up at the same time and wait for radio to install
13) after installation of radio wipe data and catch -> navigate to factory reset and do it
14) Then go to install update from external memory and install retailEU. jellybean OTA that you downloaded (you have to put it to your external SD card)
15) If all is fine it will update, just reboot and its unbricked
no luck what else can you suggest please any help would be really appreciated

sorry buddy but i didn't read all of your post. cuz i know it. if you can't flash your phone using fastboot recovery bootloader mode and ect... you need to flash using J-TAG or BOX , normal users doesn't have these tools, mobile fixers have these... that is the very last way of flashing...
if i helped you press THANKS button

m3ni said:
sorry buddy but i didn't read all of your post. cuz i know it. if you can't flash your phone using fastboot recovery bootloader mode and ect... you need to flash using J-TAG or BOX , normal users doesn't have these tools, mobile fixers have these... that is the very last way of flashing...
if i helped you press THANKS button
Click to expand...
Click to collapse
I know what J-TAG is but when you say box what box are you talking about?
also what is this error I keep getting in RSD Lite CDT.BIN phone returned fail I couldn't find any useful information on the web or here

re
prz0007 said:
I know what J-TAG is but when you say box what box are you talking about?
also what is this error I keep getting in RSD Lite CDT.BIN phone returned fail I couldn't find any useful information on the web or here
Click to expand...
Click to collapse
because no one faced that problem, even me, but i see lots of pepple failing to flash theyr phones and using j-tag, ok i don't know what is the name of box there, but here they call it box, it will cpnnect to COM1 port and a tiny box is in middle and it will connect to phone! it has its own flash tools and... the box is 20-30$ i never buy one of them, i just pey them for flashing (for some phones that i can't flash)
we can't do this, so maybe you can? i suggest you to call your mobiles caustomare care service, and tell the problom to them, they know what to dp
and i read some where that motorolla uses mtk chipsets
so try a search of " how to flash mtk phones "
it use sp flash tool, sorry
and other thing, i'm so sleepy i cant type any more, if i helped press thanks...

Root Qiku Q Terra 808 (CP8692_I02), unlock bootloader & flash TWRP recovery

Hello Friends,
At last I figured out how to unlock bootloader, root & flash TWRP recovery !!
To achieve the above you should have some basic knowledge of adb, fastboot & flashing.
The usual warning... Try the following on your own risk, don't blame me if your device is dead, burnt or you lose your job because your boss couldn't contact you on your dead cell phone :laugh:.
Lets Begin !!
1) Download & install ADB-setup and Qiku Download Assistant.
2) Go to bootloader, switch off your phone and press and hold volume up button while connecting usb cable. When you see bootloader press volume up again to enter fastboot mode.
3) Go to device manager and you should see “Android or unknown” with a yellow exclamation mark under “other device”. You have to manually install fastboot driver here, just google it how to do it. You to have
go to C:\Program Files (x86)\Qiku\adb and select QK_ANDROID_ADB to install drivers.
4) Unzip the firmwares zip files.
5) Now to unlock bootloader we have flash the following firmware 6.0.018.P2.160720.QK8692.CPD but we have to force close Qiku flashing tool when flashing is at 1-2%. To do that open task manager on your pc before flashing and end Qiku flashing when the flashing is 1-2%.
6) Disconnect phone from pc and reconnect while pressing & holding volume up if you see completely black display it means now you have unlocked bootloader. Always refer to the device manager in your pc if your device is in fastboot mode as you would not see anything on the device display once you flashed the above mentioned firmware.
7) Go to the folder where you have the TWRP custom recovery. While in the folder press shift and right click and select “open command prompt here” from the menu. Copy “fastboot -i 0x1EBF flash recovery Qiku-TWRP-recovery.img” without quotes and paste in the cmd and enter.
8) Once Qiku TWRP recovery is flashed successfully lets boot the same from bootloader. While in the folder press shift and right click and select “open command prompt here” from the menu. Copy “fastboot -i 0x1EBF boot Qiku-TWRP-recovery.img” without quotes. Your device should boot in TWRP recovery.
9) In the TWRP recovery on your phone go to advance and select adb sideload and start the same.
10) Go to the folder where you have the SuperSu.zip and open command prompt here. Copy “adb sideload UPDATE-SuperSU-v2.78-20160905010000.zip” paste in the cmd and enter, without quotes.
11) Now if you wish to lock bootloader again then select reboot option in the recovery and select bootloader. Go to the folder where you have the emmc_appsboot.mbn file and open command prompt here. Copy “fastboot -i 0x1EBF flash aboot emmc_appsboot.mbn” without quotes and paste in the cmd and enter. This will lock the bootloader and you can always unlock the bootloader by following above mentioned instructions.
13) Copy “fastboot -i 0x1EBF reboot” in cmd and enter. This should reboot you phone.
14) If everything went well you should see supersu app in the phone. You can also check by an app called root checker from play store if you have successfully rooted your device.
When you have the unlocked bootlader there would be no display when you're in fastboot mode hence you have to check in device manager to ensure that the device is fastboot mode. Plus while booting or rebooting there would not be any boot animation but only the boot sound. This is due to the unlock bootloader.
Contents of the download link :
A) Stock firmware for the device v21. incase you have trouble and wish to flash stock firmware.
B) Firmware to unlock bootloader 6.0.018.P2.160720.QK8692.CPD.
C) 8692_I02 individual .img of stock.
D) adb-setup for adb & fastboot drivers
E) Stock aboot .img to lock bootloader.
G) Qiku download assistant.
E) Qiku TWRP recovery
F) SuperSu.zip.
Download link -- https://drive.google.com/drive/folders/0Bwy9M10qfmJLNElFemQwTTFXcTQ
Upgrade to the latest 360 OS, Android 6.0.1 and also activate VoLTE - https://forum.xda-developers.com/android/general/upgrade-qiku-cp8692i02-to-6-0-1-t3529352
Have fun :good::good:

Thanks! It's interesting method, but a little bit risky.

Zauq said:
Root Qiku Q Terra 808 (CP8692_I02), unlock bootloader & flash TWRP recovery
Click to expand...
Click to collapse
I want to change CP8692_I02 to CP8692, because i want up firmware android 6 Chinese Version

youngbi said:
I want to change CP8692_I02 to CP8692, because i want up firmware android 6 Chinese Version
Click to expand...
Click to collapse
You can change the same in buid.prop once you're rooted however you would not just be able to flash and boot Andoird 6 Chinese firmware on your device. I have tried the same but it does not work.

djking2 said:
Thanks! It's interesting method, but a little bit risky.
Click to expand...
Click to collapse
Not at all if you ask me as I have been playing with my device for past 8 months or so. I did hard brick my device at several occasions but was always be able to recover it. During those hard brick the device goes into fastboot mode on it's own or one can press and hold power key & volume up to force the device to go into fastboot mode which it always does.
To recover the device from hard brick it needs to be in fastboot mode whether locked bootloader or unlocked bootloader. If the bootloader is locked then the official tool can flash the stock firmware and boom... The device will be Alive again. Incase of unlocked bootloader it's just the matter of flashing the firmware .imgs through fastboot mode:good: or if you've taken backup in TWRP then just boot TWRP and restore your device.
One warning though... Do not try to flash any other OEM's firmware as I am not sure what would be the outcome as I have only tried our device OEM's firmware. Yes can try porting other custom rom to our device as it only involves flashing system.

i can confirm this mathod is 100% working thanks man

yogesh1970 said:
i can confirm this mathod is 100% working thanks man
Click to expand...
Click to collapse
:good::good::good::good::good:

please tell me why firmware 6.0.018.P2.160720.QK8692 is not booting

hello Zauq please help me
i have screwed modem.img of my qiku q terra .
i am able to write imei back but no signal because of screwed baseband.
i just flashed the baseband of moto x pure edition to enhance the lte signal and all this **** happens.
however i have backuped the modem 1 and modem 2 .img files via partion backup and restore . but forgot to backup modem.img
please provide me modem.img from your qiku phone so i can restore my signal
please :crying::crying::crying::crying::crying:
thanks

Zauq said:
yogesh1970 said:
hello Zauq please help me
i have screwed modem.img of my qiku q terra .
i am able to write imei back but no signal because of screwed baseband.
i just flashed the baseband of moto x pure edition to enhance the lte signal and all this **** happens.
however i have backuped the modem 1 and modem 2 .img files via partion backup and restore . but forgot to backup modem.img
please provide me modem.img from your qiku phone so i can restore my signal
please :crying::crying::crying::crying::crying:
thanks
Click to expand...
Click to collapse
I had backed up the modem using Flashfire app and I have uploaded the same. Check the given link in the original post, there is a new folder by Modem name.
Click to expand...
Click to collapse
hello Zauq thanks for ur reply. i flashed all the modem files but so signal
only u in this world can give breathe to my qiku
can you please give me QPST qcn backup made from qiku
it will repair my nvram files
please help
here is some info
download these driver
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
and install QPST
http://www.androidbrick.com/download/qpst-2-7-430-latest-qfil-qualcomm-flasher/
1 Enable Usb Debugging .
go adb fast boot and type
adb shell
2 Then
su
3Give Root Permission In Your Device . then type
setprop sys.usb.config diag,adb
This Comand Will Open DIAG COM Port
then go device manager under port tab there is qualcomm diagnostic port
then go to C:\Program Files (x86)\Qualcomm\QPST\bin\QPSTConfig
there u see ur port
uder start client
go to soft download
than backup tab
backup ur qcn
please give me that file
it will fix my nvram files and give me signal
my 20k depends on ur qcn backup
thanks

yogesh1970 said:
hello Zauq thanks for ur reply. i flashed all the modem files but so signal
only u in this world can give breathe to my qiku
can you please give me QPST qcn backup made from qiku
it will repair my nvram files
please help
here is some info
download these driver
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
and install QPST
http://www.androidbrick.com/download/qpst-2-7-430-latest-qfil-qualcomm-flasher/
1 Enable Usb Debugging .
go adb fast boot and type
adb shell
2 Then
su
3Give Root Permission In Your Device . then type
setprop sys.usb.config diag,adb
This Comand Will Open DIAG COM Port
then go device manager under port tab there is qualcomm diagnostic port
then go to C:\Program Files (x86)\Qualcomm\QPST\bin\QPSTConfig
there u see ur port
uder start client
go to soft download
than backup tab
backup ur qcn
please give me that file
it will fix my nvram files and give me signal
my 20k depends on ur qcn backup
thanks
Click to expand...
Click to collapse
I would love to help you but I hard bricked my device about 2 days ago while playing with emmc_appsboot.mbn . As you know to recover the device we need rawprogarm0.xml, patch0.xml etc and the stock rom doesn't contain any of the said files.
Fortunately, I am in touch with another Qiku user and I have already written to him about your requirement. I have also requested to him to respond to you on the xda forum itself. Let's wait for his response.
Besides, I was wondering if you know any ways to get the rawprogram0.xml, patch0.xml etc from a working Qiku for recovering my hard bricked device?? or any other method which can help?. Can Qdart tool help in anyway??.
I have searched Qiku Chinese forum but unable to find the required files.
Any help would be much appreciated :fingers-crossed::fingers-crossed::fingers-crossed: !!

Sure i ll send those files to you in a day or two!

yogesh1970 said:
please tell me why firmware 6.0.018.P2.160720.QK8692 is not booting
Click to expand...
Click to collapse
Not sure of the reason. I was just able to boot v109 which is 5.1.1 same as our current android version.

Help me with my hard brick phone qiku terra china version
Zauq said:
I would love to help you but I hard bricked my device about 2 days ago while playing with emmc_appsboot.mbn . As you know to recover the device we need rawprogarm0.xml, patch0.xml etc and the stock rom doesn't contain any of the said files.
Fortunately, I am in touch with another Qiku user and I have already written to him about your requirement. I have also requested to him to respond to you on the xda forum itself. Let's wait for his response.
Besides, I was wondering if you know any ways to get the rawprogram0.xml, patch0.xml etc from a working Qiku for recovering my hard bricked device?? or any other method which can help?. Can Qdart tool help in anyway??.
I have searched Qiku Chinese forum but unable to find the required files.
Any help would be much appreciated :fingers-crossed::fingers-crossed::fingers-crossed: !!
Click to expand...
Click to collapse
Help! l have qiku terra china after flash qk8692_l02 rom it is boot normal but l reflash to china qk8692_m02 so it not boot, black sreen, no led, only fastboot work. Help me !

cuongvietnam said:
Help! l have qiku terra china after flash qk8692_l02 rom it is boot normal but l reflash to china qk8692_m02 so it not boot, black sreen, no led, only fastboot work. Help me !
Click to expand...
Click to collapse
You mean you had a device QK8692_M02 and you flashed QK8692_I02 and booted normally but when you tried to go back to your QK8692_M02 it hard bricked??
Well my friend I am afraid but now you need to reflash QK8692_I02 to use the device and you might not be able to go back to your Chinese OS now. There was a similar case where this gentleman from Russia did the same thing to his Chinese Qiku device and he was not able to go back to Chinese OS now. There is something with the QK8692_I02 OS I guess.
I was able to boot v109 of Chinese OS on my QK8692_I02 and the v109 rom & the instructions are there on the given download link. I was in process of being able to use Chinese OS on my QK8692_I02 when I hard bricked my device . Now I need emmc image of Qiku to unbrick it and then I can continue my research and might be able to give solutions to the issue.
Let me know if you could get me that emmc image it would be just 200-300 mb file and the same you can upload it on google drive.

Zauq said:
You mean you had a device QK8692_M02 and you flashed QK8692_I02 and booted normally but when you tried to go back to your QK8692_M02 it hard bricked??
Well my friend I am afraid but now you need to reflash QK8692_I02 to use the device and you might not be able to go back to your Chinese OS now. There was a similar case where this gentleman from Russia did the same thing to his Chinese Qiku device and he was not able to go back to Chinese OS now. There is something with the QK8692_I02 OS I guess.
I was able to boot v109 of Chinese OS on my QK8692_I02 and the v109 rom & the instructions are there on the given download link. I was in process of being able to use Chinese OS on my QK8692_I02 when I hard bricked my device . Now I need emmc image of Qiku to unbrick it and then I can continue my research and might be able to give solutions to the issue.
Let me know if you could get me that emmc image it would be just 200-300 mb file and the same you can upload it on google drive.
Click to expand...
Click to collapse
Hi my friend! After l flash emmc in your folder it reboot to 360 company then load fastboot. l use qiku tool to flash stock rom but after complete it no boot sreen only black when plug in laptop it is bootloader coolpad driver. l can flash qk8692_m02 and qk8692_i02 but it not boot to logo and system! How to get it boot system ? Thank you!

somebody here can give me qcn backup from qpst tool from qiku ??

yogesh1970 said:
somebody here can give me qcn backup from qpst tool from qiku ??
Click to expand...
Click to collapse
Do You Still need it>?

thanks shubham cuongvietnam give me that file signal restored ok . but qiku models no gives full speed on gio networks where as RN3 pro is giving full
qiku 70 kbps
RN3 nd other models i tired 3 MBPS
any solution ??

yogesh1970 said:
thanks shubham cuongvietnam give me that file signal restored ok . but qiku models no gives full speed on gio networks where as RN3 pro is giving full
qiku 70 kbps
RN3 nd other models i tired 3 MBPS
any solution ??
Click to expand...
Click to collapse
Yes! You can use follow method:
1. Create a new APN
2. If you see on network icon is E not 3G that not support my EFS model(8692_m02) for you. So you can try a qcn file from same model.

[Guide] Meizu M3 & M3s Unbrick

After experiencing help from the fantastic meizu community i have decided to make a guide for unbricking this device. This guide is aimed to help people with M3 or M3s that cannot boot. Please only follow these steps to unbrick your device
I am not responsible for bricked devices and exploding phones due to following these steps.
By following these steps you agree that it is you, yourself that chose to follow these steps and I will not take any responsibility for your loss.
Before Starting
1. Can you boot ?
No. Go to Question 2.
Yes. You have came to the wrong place, but feel free to finish reading.​2. Do you see the flyme logo when you boot?
Yes. Goto Stuck on Flyme Logo
No. Go to Question 3​3. Do you see the Meizu Logo and phone reboots over and over
Yes. Go to Testing
No. You flashed a wrong or damaged preloader, chances of unbricking LOW, Go to Sp Flash Tool​
Testing
1. Shutdown your phone by holding power button (if you can)
2. Turn on phone with power + volume up until vibrates
I see a flyme logo & recovery options, Goto Stuck on Flyme Logo
Still rebooting, Continue​
3. Turn on phone with power + volume down until vibrates
I see the words 'fastboot' at bottom, Go to Sp Flash Tool
I see nothing, your preloader is dead, I cannot help you :crying:.​
Sp Flash Tool
Requirements
Micro USB cable (plug phone to pc)
Computer (prefer windows)
Internet to download​
1. Download SP_Flash_Tool Link below
2. Download Firmware for your device (latest)
M3 Link https://downloads.meizufans.eu/?dir=m3/firmware/stable
M3s Link https://downloads.meizufans.eu/?dir=m3s/firmware/stable​3. Download scatter file 'MT6750_android_scatter.txt' Link below
4. Use sp_flashtool (flashtool.exe)
A. Uncompress SP_Flash_Tool.zip into pc
B. Uncompress 'update.zip' (the firmware)
C. Copy downloaded scatter file 'MT6750_android_scatter.txt' to update folder
D. 'Run as Administrator' flash_tool.exe file
E. Go to the menu Options -> connection - > usb full speed with battery
F. For download agent select DA_PL.BIN from the same folder
G. Load the downloaded scatter file 'MT6750_android_scatter.txt' in update folder
H. Select the 'download only' option (don't press download yet)
I. Untick all the ROM at the bottom.
J. Suggest to select and flash one ROM at a time (except userdata and boot)
recovery
m1img
md1dsp
md1arm7
md3img
lk
lk2
tee1
tee2​WARNING do NOT flash 'preloader'
K. Flash by clicking download
L. Turn on and connect phone to computer when vibrate
M. Wait for download to complete, with a green tick.
N. After flashing all ROM, now flash boot.​5. Power on your phone.
6. Did it work?
No, Still in reboot cycle, Retry from the top, or use different update.zip
Yes, i have boot to flyme logo but stuck in boot logo, goto Stuck on Flyme Logo
Yes, i have boot to flyme logo and my phone is back, Congrats.​
Links
Scatter File: https://drive.google.com/file/d/0B3pRT6ewL6tqeWZhQThFRGVwbE0/view?usp=sharing
SP Flash Tool.zip:
https://drive.google.com/file/d/0B3pRT6ewL6tqSW8tNTQ1OFY2eXc/view?usp=sharing​
Stuck on Flyme Logo
You see the flyme logo, and the logo spins couple every couple of sec and waited for over 30 min and still does not boot.
Get in recovery mode, two ways choose one.
Method one (easy)
1. Turn off Phone (Force by holding power button)
2. Turn on Phone with power + volume
If it does not work go to Sp Flash Tool or Method two
Yes, my devices is now in recovery mode, continue the steps, skip Method two​
Method two (need computer and harder)
1. Turn on the Phone where the logo spins
2. install adb on computer (link http://forum.xda-developers.com/showthread.php?t=2588979)
3. Plug phone into computer and get drivers for adb
4. Type 'adb devices' in cmd
5. If you get a device in the list continue by Typing 'adb reboot recovery'
'adb devices' not displaying devices (try method one or install driver)
'adb reboot recovery' reboots phone but not to recovery, this confirms that the recovery partition is damaged follow the steps in Sp Flash Tool
Yes, my devices is now in recovery mode, continue the steps​Download Firmware for your device (latest)
M3 Link https://downloads.meizufans.eu/?dir=m3/firmware/stable
M3s Link https://downloads.meizufans.eu/?dir=m3s/firmware/stable​
Plug Phone (in recovery mode) to computer. Copy the downloaded file 'update.zip' into the removable device named 'recovery' (do not unzip)
Tick the top option (system upgrade) and click 'start'
Wait be patient.:fingers-crossed:
Special Thanks
Kokotonix, this is a build up of Kokotonix's post link here: https://forum.meizufans.eu/topic/65...om-bootloop-meizu-logo-and-constant-reboot/11
Meizufans, thanks for this website and everyone in it, where i got most of the information from.
Questions & Answers
Q. Why is my phone unrepairable if i can get to fastboot?
A. By not being able to access fastboot means the preloader partition is damaged and SP Flash Tool will not work.​Q. Why is my phones not bootable.
A. It could be caused by many factors but mainly caused by failure in updating firmware due to no battery or incorrect flashing of ROM.​Q. Why is it so hard to recover meizu phones
A. Meizu phone uses the new mt67xx which is not supported by MTK droid tool causing problems for users to obtain the scatter file, and also the locked bootloader leading the users not being able to recover the devices the traditionally using fastboot.​Q. I have a m3 note can i use this method?
A. Yes if anyone gets there hands on the mt6755 scatter file for meizu. But if not No​Q. HELP ME IT'S NOT WORKING!!!
A. Calm down, follow the steps again, if not comment below.​Q. How do i brick my device
A. Get root and flashify and flash a random .img as the kernel. (it works i tried)​
Thank you for Reading and wish you for the best on this device.
Comment below for help and also share you success.

reserved

phone is dead(

More info? You lost your preloader
Sent from my M3s using XDA-Developers mobile app

bluecub1st said:
More info? You lost your preloader
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
after installing damaged rom its completely dont turn on only when you plug it to pc it recognize it like MTK Usb Port

logirus said:
after installing damaged rom its completely dont turn on only when you plug it to pc it recognize it like MTK Usb Port
Click to expand...
Click to collapse
Any display? or just black?
What rom did you install? If official you might be able to get a replacement through warranty.
Try SP Flash Tools, instruction in the first post. Chances are low but test if it detects after pressing download.

bluecub1st said:
Any display? or just black?
What rom did you install? If official you might be able to get a replacement through warranty.
Try SP Flash Tools, instruction in the first post. Chances are low but test if it detects after pressing download.
Click to expand...
Click to collapse
i installed from official firmware after installing it rebooted and never turn on no vibration nothing(no warranty i bought it from china on aliexpres) and please look at error ive got sp flash tool

Wrong download agent use the one I used in guide DA_PL.BIN
Sent from my M3s using XDA-Developers mobile app

Looks like it detects it phone u have hope
Sent from my M3s using XDA-Developers mobile app

bluecub1st said:
Wrong download agent use the one I used in guide DA_PL.BIN
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
i used DA_PL.BIN and got the same error, maybe bootloader is locked thats why this error?

The error shows when your device started before the software can flash anything. SP flash tools works with locked bootloader, maybe your preloader is 100% dead
Sent from my M3s using XDA-Developers mobile app

bluecub1st said:
The error shows when your device started before the software can flash anything. SP flash tools works with locked bootloader, maybe your preloader is 100% dead
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
and no way to repair it?:crying: i think im gonna trash this chinese cellphone away and never buy meizu again

No recovery, Fastboot mode is working. What should I do with this error?

Is there a way to work on me with meizu m3 max

Hi,
SPFlashtools fails to connect dead bricked Meizu M3S
Connecting to USB system recognizes as
MediaTek DA USB VCOM Port (COM7)
But other ports including Preloader are not
Do I have any hope to recover phone?

After following these steps, one by one, no matter if all went OK, my phone (m3s) won’t boot and it seems it is completely dead now. It can’t turn on. Power button looks unresponsive. What should I do? Is there any help?

many thanks for this guide @bluecub1st . The problem I have with my M3s is that it boots perfectly fine and works well, i just cannot enter recovery by using Volume + and power, and flashing a new firmware from inside Flyme OS just reboots the phone. I can enter fastboot though no problem, but i tried to do the SP Flash tool method listed and I just get this error message:
ERROR : S_TIMEOUT (0x412)
Any ideas how to fix this and get my recovery back? Really need some help so i can flash flyme 6...

i got error from sp_flashtool
ERROR : STATUS_SEC_DL_FORBIDDEN (0X0020004)
help me please sir

ERROR : STATUS_SEC_WRITE_DATA_NOT_ALLOWED
what to do ?

phone dead... thnks

Nokia 3 Preloader Bricked

Hello XDA-Team and all others who read this.
I got an Nokia 3 from Friend who killed Device trying to Flash TWRP and Root Phone ...
The Phone can only be "Powered On" by pressing Vol Up & Power for a few seconds. After this the phone will only vibrate after each 10 seconds - i think its trying to boot but fails and then try again ... until battery will powered down and needs recharge (with no displaying charging status)
Under Windows - Device Manager - the conected phone will change in each loop cycle between the following stats :
1. PreLoader USB VCOM Port (COM3) - 2. MTK USB Port (COM4) - 3. MTK USB Port (COM4) - and then vibrate and start again
... so i think the PreLoader is bricked - first because i've read that these PreLoader will loaded first after PowerOn - like a BIOS on any Mainboard
I've tryed any solution i found on the web - mostly on xda - incl. OST LA Tool, SP Flash Tool and others ... so i've noticed some "error messages" from SP Flash Tool and also that an trying to Flash with SP Flash Tool stops the boot-vibrate-loop
Is there any solution to manually Reflash original Firmware or repair the PreLoader ???
I know older Nokia Phones can be "Reflashed" by using an self builded USB-OTG "Y-Cable" with the following configuration: Side A : USB-A plug to connect to usb power plug (or computer) - Side B: micro-USB Plug to connect phone - Side C: USB-A female to connect USB-Stick with the needed Firmware Image File (on older nokia phones it will be an NB0-File i know) ... i also know you must first put the USB-Stick with File via the cable to the OFF-POWERED Phone and then put the USB-A plug into Power and wait until the "Update Procedure" will be finished - most under 30 minutes
So, if the will be an idea or solution to fix this "Error" PLZ HELP

M4RCJO said:
Hello XDA-Team and all others who read this.
I got an Nokia 3 from Friend who killed Device trying to Flash TWRP and Root Phone ...
The Phone can only be "Powered On" by pressing Vol Up & Power for a few seconds. After this the phone will only vibrate after each 10 seconds - i think its trying to boot but fails and then try again ... until battery will powered down and needs recharge (with no displaying charging status)
Under Windows - Device Manager - the conected phone will change in each loop cycle between the following stats :
1. PreLoader USB VCOM Port (COM3) - 2. MTK USB Port (COM4) - 3. MTK USB Port (COM4) - and then vibrate and start again
... so i think the PreLoader is bricked - first because i've read that these PreLoader will loaded first after PowerOn - like a BIOS on any Mainboard
I've tryed any solution i found on the web - mostly on xda - incl. OST LA Tool, SP Flash Tool and others ... so i've noticed some "error messages" from SP Flash Tool and also that an trying to Flash with SP Flash Tool stops the boot-vibrate-loop
Is there any solution to manually Reflash original Firmware or repair the PreLoader ???
I know older Nokia Phones can be "Reflashed" by using an self builded USB-OTG "Y-Cable" with the following configuration: Side A : USB-A plug to connect to usb power plug (or computer) - Side B: micro-USB Plug to connect phone - Side C: USB-A female to connect USB-Stick with the needed Firmware Image File (on older nokia phones it will be an NB0-File i know) ... i also know you must first put the USB-Stick with File via the cable to the OFF-POWERED Phone and then put the USB-A plug into Power and wait until the "Update Procedure" will be finished - most under 30 minutes
So, if the will be an idea or solution to fix this "Error" PLZ HELP
Click to expand...
Click to collapse
OST LA is easiest method to flash firmware. Can it boot to fastboot mode?

SkaboXD said:
OST LA is easiest method to flash firmware. Can it boot to fastboot mode?
Click to expand...
Click to collapse
Nope ... it will only vibrate at each 10 seconds ... display are still blank / black / noting happens on it :/

M4RCJO said:
Nope ... it will only vibrate at each 10 seconds ... display are still blank / black / noting happens on it :/
Click to expand...
Click to collapse
Daymm, idk then, that's a big problem

cant run nokia 3
I have the same problem just that vibrate each 5 seconde witha black screen any help please

I have the same Problem. Unresponsive, black screen, vibrating every ~10 seconds. No button presses lead to a change in behaviour

Same to you ,caz I erased the preloader partition,so now got the only vibrating phone,XD, yeah, it's hard bricked.
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
haumich_blau said:
I have the same Problem. Unresponsive, black screen, vibrating every ~10 seconds. No button presses lead to a change in behaviour
Click to expand...
Click to collapse
Hard bricked
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:03 PM ---------- Previous post was at 08:02 PM ----------
mediafire007 said:
Same to you ,caz I erased the preloader partition,so now got the only vibrating phone,XD, yeah, it's hard bricked.
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
Hard bricked
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
Do not erase the preloader, it's very important or you will kill the phone.
Sent from my SM-G950F using Tapatalk

i extracted preloader.bin from 7.1.1 december security patch, is it there a way to somehow flash it?

Hi there, I don't have much time to explain in details now, but Ive been able to unbrick my Nokia 3 from this state by using SF flashtool with emergency mode and a rom version that I found around. It gave it life back.
After that I've been able to boot into fastboot mode and I flashed the boot.img and system.img (and not sure for the cache.img) using the fastboot commands. These IMG files were taken from a full rom update.zip (android 7.0 that I found around). I t removed root and if I well remember, the bootloader was relocked (not quite sure). After that, I could get the OTA updates (even Oreo beta).
I'll try to give more details (links to the correct ROMs, exact commands) later if you still struggle.
Hope this help anyway!
Cheers

Seem problem here, keeps vibration every now and then. But nothing shows up even ost la doen't recognise phone anymore.
Todrak, if you do have more details. I guess where all happy to hear it..

Loaded scatter file. Opened SP Flash Tools. Clicked download. Entered meta mode by pressing vol up + vol down + power on at the same time. Tried auth file, but it doesn't work.
So we stucked until we get proper auth file.

Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
Max brackenz said:
# Download Nokia 3 supported Download agent file
# Now put it to the sp flashtool folder (replace with DA_SWSEC_CRYPTO20.bin)
# Run flash_tool.exe with administrator, and choose the Download-Agent I give you
# DONE
Download Agent https://mega.nz/#!xd8B3AJQ!PW82IpLzMzyNQk55BdwMnRMPlKQA0Yzj_8k_xN5r9XM
Click to expand...
Click to collapse
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.

SkaboXD said:
Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.
Click to expand...
Click to collapse
you save my phone thnx bro you are really BOSS ♥

Riadh300 said:
you save my phone thnx bro you are really BOSS ♥
Click to expand...
Click to collapse
np bro, I'm always willing to help

SkaboXD said:
Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.
Click to expand...
Click to collapse
Nice to hear:fingers-crossed:

SkaboXD said:
Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.
Click to expand...
Click to collapse
thanks, you saved my phone, that works 100%.

please hellppp
Krahmati said:
thanks, you saved my phone, that works 100%.
Click to expand...
Click to collapse
i tried the manipulation it ask me authentification file pleaseeeee helllppp

f0lcan said:
i tried the manipulation it ask me authentification file pleaseeeee helllppp
Click to expand...
Click to collapse
hold power on + volume up buttons. If it asks asks for auth file try again

Hi, i dont know how, but guide from SkaboXD works... I unbrick my vibrate device and phone start works. Bud i had problem with bootloader and unlock him with fastboot... (when i confirm yes i´ll open the bootloader it was error 0x7000 or something like that. So, i started try another roms and flash. In some rom after failed download and format flash with SP Tool is brick to harder... When i connected now phone into computer isnt vibrate only it show in device manager (Mediatek Preloader USB VCOM port (COM6)) and now if i try to flash (only download) with SP TOOL it show error 5000 (auth file) or error 2005. While i write this. I dont think so, that its possible to unbrick my device but if somebody buy this phone to the root isnt right choise... Its problem phone... If somebody have some suggestion how can fix this i would like...

dont flash any nokia 3 mobile with sp flash tool it totally brick your phone. please give it to a phone shop if you want to change the version or any other problem. i bricked my phone with sp flash tool. it is harder to save my phone. now i gave it to a shop for repair i don't know they can fix problem or not.....

Bricked my H910PR by flashing H918 firmware on it.

As above stated I've bricked my LG V20. Completely black screen, no download mode, no anything.
I've taken a few steps towards unbricking it and none of them were successful:
Uppercut and LGUP (device not found)
QFIL (Sahara errors and connection errors)
Either I screwed up something in the "revival" process, there is another method I don't know about or the only thing left for me is buying a new board.
I would greatly appreciate help.

MarkusPolska said:
As above stated I've bricked my LG V20. Completely black screen, no download mode, no anything.
I've taken a few steps towards unbricking it and none of them were successful:
Uppercut and LGUP (device not found)
QFIL (Sahara errors and connection errors)
Either I screwed up something in the "revival" process, there is another method I don't know about or the only thing left for me is buying a new board.
I would greatly appreciate help.
Click to expand...
Click to collapse
Once you flash h918 firmware on a non h918 you're done, there's no recovering it.
Sent from my LG-H910 using XDA Labs

cnjax said:
Once you flash h918 firmware on a non h918 you're done, there's no recovering it.
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
So i guess that swapping boards is the only thing i have left.

MarkusPolska said:
So i guess that swapping boards is the only thing i have left.
Click to expand...
Click to collapse
Yep or get a new phone
Sent from my LG-H910 using XDA Labs

EDIT: forum made me remove all links to post, but then let me edit and added some back.
I have just a little experience with rooting, just enough knowledge to be dangerous, but I'll try to help anyway.
I thought I had bricked my phone this weekend, but managed to get it going again.
Wrote this up from memory, but pretty sure its right.
I needed to do this because download didn't work, ie Volume up + plug usb to PC = download mode and if you start the patched lgup and it doesn't find your v20.
At this point, I thought the phone was bricked, so had nothing to lose.
Install fastboot and adb: link
Download H915 v10e KDZ . H91510e_00_VTR_CA_OP_1205.kdz.
Download latest LT Extractor SW . https://forum.xda-developers.com/showthread.php?t=2600575
Run the extractor sw, select the kdz file downloaded above and extract DZ file from it
Select DZ file, and extract lafxxx.bin
REMOVE ANY NUMBER FROM THE NAME OF FILES and change ext to .img ( SUPPOSE YOU GET laf21345.bin THEN RENAME TO laf.img)
Note that laf is "LG Advanced Flash".* It loads download mode and lets you write a new kdz.
Copy laf.img to folder with fastboot installed in step 1
Download and install lg v20 usb driver, under "LG Universal Mobile Drivers Download" at this link:
https://www.lg.com/us/support/help-library/lg-mobile-drivers-and-software-CT10000027-20150179827560
Hold Volume down then plug usb to PC to put phone into fastboot mode.
Go to windows Device Manager, and should be a row for android.* Click and make sure its working properly.
Run Command.com, go to folder with fastboot,then run
fastboot devices
fastboot responds with device info.* If not, figure out why before proceeding.
fastboot erase recovery
fastboot erase laf
fastboot*flash*laf laf.img
fastboot reboot
exit
You should be able to connect in download mode now.