Nokia 3 Preloader Bricked - Nokia 3 Questions & Answers

Nokia 3 Preloader Bricked - Nokia 3 Questions & Answers

Hello XDA-Team and all others who read this.
I got an Nokia 3 from Friend who killed Device trying to Flash TWRP and Root Phone ...
The Phone can only be "Powered On" by pressing Vol Up & Power for a few seconds. After this the phone will only vibrate after each 10 seconds - i think its trying to boot but fails and then try again ... until battery will powered down and needs recharge (with no displaying charging status)
Under Windows - Device Manager - the conected phone will change in each loop cycle between the following stats :
1. PreLoader USB VCOM Port (COM3) - 2. MTK USB Port (COM4) - 3. MTK USB Port (COM4) - and then vibrate and start again
... so i think the PreLoader is bricked - first because i've read that these PreLoader will loaded first after PowerOn - like a BIOS on any Mainboard
I've tryed any solution i found on the web - mostly on xda - incl. OST LA Tool, SP Flash Tool and others ... so i've noticed some "error messages" from SP Flash Tool and also that an trying to Flash with SP Flash Tool stops the boot-vibrate-loop
Is there any solution to manually Reflash original Firmware or repair the PreLoader ???
I know older Nokia Phones can be "Reflashed" by using an self builded USB-OTG "Y-Cable" with the following configuration: Side A : USB-A plug to connect to usb power plug (or computer) - Side B: micro-USB Plug to connect phone - Side C: USB-A female to connect USB-Stick with the needed Firmware Image File (on older nokia phones it will be an NB0-File i know) ... i also know you must first put the USB-Stick with File via the cable to the OFF-POWERED Phone and then put the USB-A plug into Power and wait until the "Update Procedure" will be finished - most under 30 minutes
So, if the will be an idea or solution to fix this "Error" PLZ HELP

M4RCJO said:
Hello XDA-Team and all others who read this.
I got an Nokia 3 from Friend who killed Device trying to Flash TWRP and Root Phone ...
The Phone can only be "Powered On" by pressing Vol Up & Power for a few seconds. After this the phone will only vibrate after each 10 seconds - i think its trying to boot but fails and then try again ... until battery will powered down and needs recharge (with no displaying charging status)
Under Windows - Device Manager - the conected phone will change in each loop cycle between the following stats :
1. PreLoader USB VCOM Port (COM3) - 2. MTK USB Port (COM4) - 3. MTK USB Port (COM4) - and then vibrate and start again
... so i think the PreLoader is bricked - first because i've read that these PreLoader will loaded first after PowerOn - like a BIOS on any Mainboard
I've tryed any solution i found on the web - mostly on xda - incl. OST LA Tool, SP Flash Tool and others ... so i've noticed some "error messages" from SP Flash Tool and also that an trying to Flash with SP Flash Tool stops the boot-vibrate-loop
Is there any solution to manually Reflash original Firmware or repair the PreLoader ???
I know older Nokia Phones can be "Reflashed" by using an self builded USB-OTG "Y-Cable" with the following configuration: Side A : USB-A plug to connect to usb power plug (or computer) - Side B: micro-USB Plug to connect phone - Side C: USB-A female to connect USB-Stick with the needed Firmware Image File (on older nokia phones it will be an NB0-File i know) ... i also know you must first put the USB-Stick with File via the cable to the OFF-POWERED Phone and then put the USB-A plug into Power and wait until the "Update Procedure" will be finished - most under 30 minutes
So, if the will be an idea or solution to fix this "Error" PLZ HELP
Click to expand...
Click to collapse
OST LA is easiest method to flash firmware. Can it boot to fastboot mode?

SkaboXD said:
OST LA is easiest method to flash firmware. Can it boot to fastboot mode?
Click to expand...
Click to collapse
Nope ... it will only vibrate at each 10 seconds ... display are still blank / black / noting happens on it :/

M4RCJO said:
Nope ... it will only vibrate at each 10 seconds ... display are still blank / black / noting happens on it :/
Click to expand...
Click to collapse
Daymm, idk then, that's a big problem

cant run nokia 3
I have the same problem just that vibrate each 5 seconde witha black screen any help please

I have the same Problem. Unresponsive, black screen, vibrating every ~10 seconds. No button presses lead to a change in behaviour

Same to you ,caz I erased the preloader partition,so now got the only vibrating phone,XD, yeah, it's hard bricked.
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
haumich_blau said:
I have the same Problem. Unresponsive, black screen, vibrating every ~10 seconds. No button presses lead to a change in behaviour
Click to expand...
Click to collapse
Hard bricked
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:03 PM ---------- Previous post was at 08:02 PM ----------
mediafire007 said:
Same to you ,caz I erased the preloader partition,so now got the only vibrating phone,XD, yeah, it's hard bricked.
Sent from my SM-G950F using Tapatalk
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
Hard bricked
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
Do not erase the preloader, it's very important or you will kill the phone.
Sent from my SM-G950F using Tapatalk

i extracted preloader.bin from 7.1.1 december security patch, is it there a way to somehow flash it?

Hi there, I don't have much time to explain in details now, but Ive been able to unbrick my Nokia 3 from this state by using SF flashtool with emergency mode and a rom version that I found around. It gave it life back.
After that I've been able to boot into fastboot mode and I flashed the boot.img and system.img (and not sure for the cache.img) using the fastboot commands. These IMG files were taken from a full rom update.zip (android 7.0 that I found around). I t removed root and if I well remember, the bootloader was relocked (not quite sure). After that, I could get the OTA updates (even Oreo beta).
I'll try to give more details (links to the correct ROMs, exact commands) later if you still struggle.
Hope this help anyway!
Cheers

Seem problem here, keeps vibration every now and then. But nothing shows up even ost la doen't recognise phone anymore.
Todrak, if you do have more details. I guess where all happy to hear it..

Loaded scatter file. Opened SP Flash Tools. Clicked download. Entered meta mode by pressing vol up + vol down + power on at the same time. Tried auth file, but it doesn't work.
So we stucked until we get proper auth file.

Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
Max brackenz said:
# Download Nokia 3 supported Download agent file
# Now put it to the sp flashtool folder (replace with DA_SWSEC_CRYPTO20.bin)
# Run flash_tool.exe with administrator, and choose the Download-Agent I give you
# DONE
Download Agent https://mega.nz/#!xd8B3AJQ!PW82IpLzMzyNQk55BdwMnRMPlKQA0Yzj_8k_xN5r9XM
Click to expand...
Click to collapse
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.

SkaboXD said:
Guys, I UNBRICKED MY DEVICE! First you need to unpack stock nb0 rom with nb0 unpacker:
https://forum.xda-developers.com/android/general/nb0-unpacker-packer-tool-t3699464
tnx to @heineken78
then you'll got all files that you need to flash with SP Flash Tool including scatter file. Load scatter file on SP Flash Tools and choose all partitions to flash (don't change, rename or move files from unpacked Stock ROM folder because SP Flash Tool will not recognize files).
then do this:
tnx to @Max brackenz
You don't need auth file. It requests auth file when you press all 3 buttons but if you enter meta mode propely, it will not ask for auth file.
You will have 3 options for flashing: Format All + Download, Firmware Upgrade and Download. Choose Download option.
Here you need to be fast.
Connect phone to computer. Click Download on SP Flash Tool. Disconnect USB cable. Enter META mode by pressing power on + volume up and quickly connect USB to PC at the same time.
Video example:
at 2:29
tnx to autor of this video.
Then it should start flashing process with red bar first (shortly) then with purple bar (shortly) and then with yellow bar. Wait for it to flash. Green circle/tick mark will appear if it's flashed successfully. It failed on 60 % for me but most importantly it flashed preloader.
Now reflash ROM with OST if you failed in half of process like me and you're good to go.
If it fails, try again. It didn't worked for me at first try.
Click to expand...
Click to collapse
you save my phone thnx bro you are really BOSS ♥

Riadh300 said:
you save my phone thnx bro you are really BOSS ♥
Click to expand...
Click to collapse
np bro, I'm always willing to help

please hellppp
Krahmati said:
thanks, you saved my phone, that works 100%.
Click to expand...
Click to collapse
i tried the manipulation it ask me authentification file pleaseeeee helllppp

f0lcan said:
i tried the manipulation it ask me authentification file pleaseeeee helllppp
Click to expand...
Click to collapse
hold power on + volume up buttons. If it asks asks for auth file try again

Hi, i dont know how, but guide from SkaboXD works... I unbrick my vibrate device and phone start works. Bud i had problem with bootloader and unlock him with fastboot... (when i confirm yes i´ll open the bootloader it was error 0x7000 or something like that. So, i started try another roms and flash. In some rom after failed download and format flash with SP Tool is brick to harder... When i connected now phone into computer isnt vibrate only it show in device manager (Mediatek Preloader USB VCOM port (COM6)) and now if i try to flash (only download) with SP TOOL it show error 5000 (auth file) or error 2005. While i write this. I dont think so, that its possible to unbrick my device but if somebody buy this phone to the root isnt right choise... Its problem phone... If somebody have some suggestion how can fix this i would like...

dont flash any nokia 3 mobile with sp flash tool it totally brick your phone. please give it to a phone shop if you want to change the version or any other problem. i bricked my phone with sp flash tool. it is harder to save my phone. now i gave it to a shop for repair i don't know they can fix problem or not.....

Related

Unbrick all lg model no download,no recovery,no fastboot,no sign of life

HI FRIENDS TODAY I AM GOING TO GIVE FULL AND EXPLAINED TUTORIAL TO UNBRICK ANY LG MODEL ( NOT SUPPORTED BY JTAG,OCTOPUS BOX)
PROBLEM INTRODUCTION
NO DOWNLOAD MODE
NO RECOVERY MODE
NO FASTBOOT MODE
FASTBOOT MODE
LG LOGO STUCK
PC DETECT AS QHSUSB BULK
PARTITION POP UP WHEN CONNECTED TO PC
SECURITY ERROR
KERNEL CRASH
NO SIGN OF LIFE
WHY MY PHONE BRICKED????????JUST FLASHING WRONG ROM ( MOST IN CASE OF REFURBISHED PHONE PURCHASED FROM THIRD PARTY SELLER)
FLASHING WRONG RECOVERY
FLASHING KERNEL
FLASHING KERNEL
DURING UPDATES ( FAILED OR INTERRUPTED)
AND MANY OTHER CAUSES
TOOLS REQUIREMENT LG FLASH TOOL FOR KDZ AND TOT FILE( http://forum.xda-developers.com/showthread.php?t=2432476(CREDIT GOES TO HYELTON)TOT OR KDZ FILE ( DEPENDING ON SITUATION) >>>>>>>>>>( KEEPING BOTH FILES RECOMMENDED)LG FIRMWARE EXTRACTOR ( http://forum.xda-developers.com/showthread.php?t=2600575) >>>>>>>>>>>> ( DOWNLOAD LATEST VERSION)
ANDROID SDK SLIM mod edit - malicious link removed) >>>>>>>>>>>> ( USEFULL TO UNBRICK PHONE IN FASTBOOT MODE)
QUALCOMM DRIVER ( http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar )>>>>>>>> ( for qhsusb bulk mode)
PDANET FOR ADB DRIVER ( http://pdanet.co/a/)
IF YOU FLASHED WRONG RECOVERY OR MODIFY PARTITION THEN YOU WILL STUCK IN FASTBOOT
SOLUTION FOR FASTBOOT
EXTRACT ANDROIDSDKSLIM.ZIP FILE ON DESKTOP ( ANY WHERE)
INSTALL PDANET AND CHOOSE LG COMPLETE INSTALLATION
DOWNLOAD PARTITION FILE FOR YOUR MODEL ( IF D802 THEN USE ONLY PARTITION FILE FOR D802) >>>>>>>>>> ( http://downloads.codefi.re/autoprime/LG/LG_G2)
NOTE : 1) YOU CAN EXTRACT PARTITION FILE FROM KDZ OR TOT FILE USING LGFIRMWARE EXTRACTOR TOOL
FOLLOW THIS VIDEO TO KNOW HOW TO EXTRACT PARTITION FILE
2) PARTITION FILE MUST BE IN .img FORMAT ( WHEN WE EXTRACT PARTITION FILE FROM KDZ OR TOT THEN IT IS IN .bin FORMAT SO SIMPLY RENAME FROM .bin to .img )
3) YOU NEED TO EXTRACT 10 FILES FROM TOT ( aboot, boot, sbl1, dbi, laf, recovery, modem, misc, rpm, tz ) and 9 FILES FROM KDZ ( misc file is not present in kdz so dont worry it is not important)
AFTER EXTRACTING PARTITION FILE AND RENAMING THEM YOU WILL GET 10 OR 9 FILE ( aboo.img, boot.img, laf.img, recovery.img, sbl1.img, dbi.img, rpm.img, tz.img, misc.img) and REMOVE ANY NUMBER FROM THE NAME OF FILES ( SUPPOSE YOU GET aboot_21345.bin THEN RENAME TO aboot.img)
NOW COPY THESE PARTITION FILE IN THE LAST FOLDER (PLATFORM-TOOLS) OF ANDROIDSDKSLIM FOLDER.
NOW CONNECT YOUR PHONE TO PC IN FASTBOOT MODE ( OPEN DEVICE MANAGER AND SEE ON THE TOP THERE WILL ANDROID ADB INTERFACE UNDER ANDROID PHONE. IF NOT THEN CHECK ADB DRIVER INSTALLED PROPERLY OR NOT.
NOW GO TO THE THE FOLDER PLATFORM -TOOL INSIDE ANDROIDSDKSLIM FOLDER.
NOW PRESS AND HOLD SHIFT BUTTON ON KEYBOARD AND RIGHT CLICK IN THAT FOLDER AND YOU WILL GET AN OPTION OPEN COMMAND PROMPT OR WINDOW HERE. CLICK ON IT AND YOU WILL GET CMD WINDOW.
NOW TYPE fastboot devices ( IT WILL SHOW YOUR DEVICES )
NOW TYPE THESE COMMAND
fastboot erase recovery
fastboot erase laf
fastboot flash laf laf.img
fastboot reboot
exitNOW REMOVE USB CABLE AND SWITCH OFF YOUR PHONE BT LONG PRESSING POWER BUTTON
NOW PRESS AND HOLD VOL UP AND CONNECT TO PC AND YOU WILL GET DOWNLOAD MODE FIXED
HURREYYYYYYYYYYYYYY
GO AND FLASH STOCK ROM ( http://forum.xda-developers.com/showthread.php?t=2432476)
IF YOU STILL STUCK IN FASTBOOT MODE THEN TYPE THESE COMMAND ( erase all 10 or 9 file and flash them one by one as shown)
fastboot erase aboot ( this command will erase aboot.img from phone)
fastboot flash aboot aboot.img ( this command will flash aboot to phone )
fastboot erase boot
fastboot flash boot boot.img
fastboot erase laf
fastboot flash laf laf.img
fastboot erase rpm
fastboot flash rpm rpm.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase modem
fastboot flash modem modem.img
fastboot erase misc
fastboot flash misc misc.img
fastboot erase sbl1
fastboot flash sbl1 sbl1.img
fastboot erase tz
fastboot flash tz tz.img
fastboot erase dbi
fastboot flash dbi dbi.img
fastboot reboot
exitNOW REMOVE USB CABLE AND SWITCH OFF YOUR PHONE BT LONG PRESSING POWER BUTTON
NOW PRESS AND HOLD VOL UP AND CONNECT TO PC AND YOU WILL GET DOWNLOAD MODE FIXED
HURREYYYYYYYYYYYYYY
GO AND FLASH STOCK ROM ( http://forum.xda-developers.com/showthread.php?t=2432476)
SOLUTION FOR ALL THE PROBLEM WITH NO DOWNLOAD MODEYOU NEED TO FORCE PHONE INTO QHSUSB BULK MODE BY SHORTING TEST POINT
WHEN YOU GET QHSUSB BULK MODE IN DEVICE MANAGER THEN INSTALL QUALCOMM DRIVER ( http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar)
NOTE : THERE ARE TWO MODE IN QHSUSB BULK
1) QUALCOMM HS-USB 9006
THIS MODE IS VERY EASY TO FIX. YOU NEED THE PARTITION FILE THAT WE GET IN THE STARTING TO SOLVE FASTBOOT MODE)
TO SOLVE 9006 FOLLOW THIS METHOD ( http://forum.xda-developers.com/showthread.php?t=2582142 )
UBUNTU METHOD IS UNIVERSAL IT CAN BE USED FOR ANY PHONE IN 9006 ( UNBRICK VERY PARTITION METHOD ( http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627) BY TUNG KICK IS ONLY FOR G2 HOWEVER IT CAN BE USED FOR GPRO2 AND G FLEX BUT I M NOT SURE IT MAY NOT WORK OR BRICKED MORE)
WHEN YOUR PHONE GET STUCK IN 9006 THEN LOTS OFF DRIVE POP UP WHEN CONNECTED TO PC ( MOST IMPORTANT IDENTIFICATION)
2 ) QUALCOMM HS-USB 9008
IF YOU STUCK IN 9008 THEN THIS IS THE SUPER HARD BRICK MODE.
CONTACT aftabalam8c2 ( http://forum.xda-developers.com/member.php?u=4554553 ) this guy not only can unbrick lg g2 , g3 but g pro 2, g flex, vu3, vu2, nexus4 , nexus 5, lg g , lg gpro, and around MORE THAN 30 ( I DONT KNOW BUT HE TOLD ME ALL HE CAN UNBRICK MORE THAN 50 ) devices of lg which not supported by JTAG OR OCTOPUS BOX.
ACCORDING TO HIM MOST USER DAMAGED DURING SHORTING OF TEST POINT ( SO BETTER TO ASK HIM BEFOR SHORT)
I NEVER SHORTED SO DONT ASK ME. HE ALSO MADE A SERIES OF TEST POINT ON YOU TUBE FOR MANY DEVICES BUT THESE VIDEO ARE NOT PUBLIC NOW. MAY BE HE MAKE ALL VIDEOS PRIVATE AFTER SOME GUY CHEATED HIM ON XDA ( CONCLUDED FROM HIS COMMENTS)
AND THE ACCOUNT OF THIS GUY DISABLED BY XDA FOR 1 WEEK ( I ASKED HIM PERSONALY ON WHATS APP)
SO IF YOU WANT THE TEST POINT FOR ANY PHONE ASK HIM.
THIS GUY UNBRICKED MY LG G FLEX IN 20 MINUTES IN FRONT OF ME ( WE ARE FROM SAME STATE SO I WENT HIS HOME)
FO THE FULL STORY OF LG G FLEX UNBRICKING SEE THIS ( http://forum.xda-developers.com/lg-...nload-mode-t3059257/post59555140#post59555140)
SO THE MOST IMPORTANT THING IS TO SHORT THE TEST POINT CORRECTLY WITHOUT DAMAGING EMMC ( I WOULD ADVICE ALL OF YOU PLEASE ASK HIM BEFOR SHORTING MAY HE SHARE THOSE VIDEOS ON YOU TUBE )
FOR COLLECTION OF TEST POINT SEE THIS ( http://forum.xda-developers.com/hardware-hacking/hardware/collection-test-phone-t3048736 )
SOLUTION FOR ERROR DURING FLASHINGFOLLOW THIS GUIDE ( http://forum.xda-developers.com/lg-g2/general/lg-g2-cross-dll-device-model-fota-laf-t3003717 )
THERE ARE MANY GUYS WHO CLAIM TO FIX YOUR BRICKED LG PHONE BUT I DONT KNOW THE AUTHENTICITY OF THESE GUYS
TUNGKICK WHICH IS ALSO WHO UNBRICK HAS VERY BAD RECORD, I SEEN THE POST MANY GUYS CLAIM THAT HE STEAL PASSWORD AND DATA FROM THEIR PC AND TOOL HE USED INSTALL KEYLOGGER TO YOUR PC ( I AM JUST TELLING THE COMMENTS ON GUYS AND THEY ALSO UPLOADED SOME PIC FOR THE PROOF)
THANKS SO MUCH
THREAD UNDER CONSTURCTION ( I WILL UPDATE PICTURE FOR MORE DETAILS )
to be continue..........

Hi Guys, pls help me.
This is not the first time i tried to update firmware using KDZUpdater [KDZ_FW_UPD.exe] .
But this is the first time my device has been bricked.
During updating my firmware, i was in "Emergency Mode" and i received some error on KDZUpdater GUI Console.
As i was unable to move from "Emergeny Mode", i tried again to update firmware, but again i got some error.
I thought removing the battery will do some good, but i was wrong.
Now my mobile is as good as "BLACK BRICK".
It even doesn't detect in "Device Manager".
Note:
Before using "KDZUpdater", i had disabled "LG modems" from device manager.
Pls help me on this.
Sent from my TCL J636D+ using XDA Free mobile app

vcforums said:
Hi Guys, pls help me.
This is not the first time i tried to update firmware using KDZUpdater [KDZ_FW_UPD.exe] .
But this is the first time my device has been bricked.
During updating my firmware, i was in "Emergency Mode" and i received some error on KDZUpdater GUI Console.
As i was unable to move from "Emergeny Mode", i tried again to update firmware, but again i got some error.
I thought removing the battery will do some good, but i was wrong.
Now my mobile is as good as "BLACK BRICK".
It even doesn't detect in "Device Manager".
Note:
Before using "KDZUpdater", i had disabled "LG modems" from device manager.
Pls help me on this.
Sent from my TCL J636D+ using XDA Free mobile app
Click to expand...
Click to collapse
You have only one option.
You need to force your phone into qhsusb bulk mode by shorting test point.

What does that mean??
Will this be done through software or I need some special hardware or should I sent to LG service centre.
Pls guide
Sent from my TCL J636D+ using XDA Free mobile app

vcforums said:
What does that mean??
Will this be done through software or I need some special hardware or should I sent to LG service centre.
Pls guide
Sent from my TCL J636D+ using XDA Free mobile app
Click to expand...
Click to collapse
You need to open your phone and do short of some pins.
A guys named aftabalam8c2 has full tutorial video how to do this.
And he will help u.
I m posting his contact details in pm

I have no download mode, but rom still works fine. cant root and cant start into recovery.
I solved the QHUSB 9006 Method in ubuntu, but after filling the partitions, all is like before, still NO download mode.....

Lg g3 f460s no download mode nor flashboot
I have lg g3 prime.
Lg g3 f460s from koria, sk telecom.
I want to install a custom rom, but it failed and i havent kept backup of stock rom, so first it shows " secure boot error" then i again go to fastboot mode and by mistake flash wrong file at boot partition & recovery partition.
After that when i switch on my phone it shows secure boot error & after it 's switched off.
When i press vol+ and insert in usb , download mode dialog comes and after 5 to 6 seconds it switch off automatically.
Not any key combination work for recovery mode & fastboot mode.
Means my phone have not download mode and not fastboot mode.
Now what should i do for unbrick it.

Don't support with lg l65 D280g?
friend you help me with D280g lg? help me pliz

I have the g pro 2 with no download mode just lg logo what should I do?

---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
SANJAYTHL said:
I have lg g3 prime.
Lg g3 f460s from koria, sk telecom.
I want to install a custom rom, but it failed and i havent kept backup of stock rom, so first it shows " secure boot error" then i again go to fastboot mode and by mistake flash wrong file at boot partition & recovery partition.
After that when i switch on my phone it shows secure boot error & after it 's switched off.
When i press vol+ and insert in usb , download mode dialog comes and after 5 to 6 seconds it switch off automatically.
Not any key combination work for recovery mode & fastboot mode.
Means my phone have not download mode and not fastboot mode.
Now what should i do for unbrick it.
Click to expand...
Click to collapse
Same here..have you found a fix yet?

daredavel said:
---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
Same here..have you found a fix yet?
Click to expand...
Click to collapse
got the solution but can't find the apropriate files, i am showing the method, if you find the files let me know.
1. with willcracker board diag,
in that case you need chipset file for apq8084 (snapdragon 805), i have searched to many but cant find. in that case you need original (latest on your phone) firmware in .tot file and convert it in .mbn file. this you can do in willcracker. only the problem is apq8084 chipset files and latest firmware in tot file. you can find it in .kdz but cant get it in .tot file.
2. with qpst programme. (qfil programe)
in this method you need programmer file, rawprogram.xml & patch.xml of the same version phone (f460s) and yes original firmware.
you can find both program on google or xda.
if you got the appropriate files let me know and share with me.
thanks in advance.

Help
Cannot unbrick ls996 in q-bulk mode. tried everything...every site. Even tried to contact member mentioned in post. Im willing to work hard to unbrick, NOT looking for easy way...out...but im no phone technican by all means. Thanks!!!

I've got a E975 (Optimus G Intl) to unbrick here.
I've got it to fastboot mode, but I can't get the laf.img and dbi.img files (they are not in the .kdz or .dz files).
Can anyone give me a help?

Wrong ROM install in LG f460s
SANJAYTHL said:
got the solution but can't find the apropriate files, i am showing the method, if you find the files let me know.
1. with willcracker board diag,
in that case you need chipset file for apq8084 (snapdragon 805), i have searched to many but cant find. in that case you need original (latest on your phone) firmware in .tot file and convert it in .mbn file. this you can do in willcracker. only the problem is apq8084 chipset files and latest firmware in tot file. you can find it in .kdz but cant get it in .tot file.
2. with qpst programme. (qfil programe)
in this method you need programmer file, rawprogram.xml & patch.xml of the same version phone (f460s) and yes original firmware.
you can find both program on google or xda.
if you got the appropriate files let me know and share with me.
thanks in advance.
Click to expand...
Click to collapse
I have same issue wrong ROM installed on LG f460s and I have no download mode, no recovery, no fastboot no charging shown, no sign of life, just Qualcomm HS-USB QDLoad 9008 is shown in device manager when connect to PC.. I am searching APQ8084 folder to paste in boarddiag tool, Dear if you have found any other way to solve this issue please let me know. thanx in advance

power outage while flashing kdz on LG C660
Please help... I know my phone is a little outdated but I would still love use it for my daily routine . I'm in the middle of flashing the original firmware when the power outage happened. Now it won't power on at all. Been searching for days on what pins/components to short to force it into qhsusb bulk mode but no luck. I hope someone can help me...:crying:

tobitab said:
Please help... I know my phone is a little outdated but I would still love use it for my daily routine . I'm in the middle of flashing the original firmware when the power outage happened. Now it won't power on at all. Been searching for days on what pins/components to short to force it into qhsusb bulk mode but no luck. I hope someone can help me...:crying:
Click to expand...
Click to collapse
Which phone??

Anyone there" help me" i hav bricked my lg g2 f320k" wenever i connect my phone to pc" lots of partitions comes up

superguy19 said:
Which phone??
Click to expand...
Click to collapse
My phone is LG Optimus Pro C660...
---------- Post added at 01:32 PM ---------- Previous post was at 01:18 PM ----------
superguy19 said:
Which phone??
Click to expand...
Click to collapse
Ajayz said:
Anyone there" help me" i hav bricked my lg g2 f320k" wenever i connect my phone to pc" lots of partitions comes up
Click to expand...
Click to collapse
Have you tried checking on the 'Device Manager' what mode is the phone in 'Ports' section when connected to pc?
After that there are instructions in the first page for every mode. My phone doesn't show up and I needed it to force into
qhsusb bulk mode in order to proceed...

Bricked LG H440n
Hello guys I have bricked my LG H440n in an attempt of unlocking the bootloader. My phone doesn't get recognised by pc, I can only enter fastboot mode, but command like "fastboot erase aboot" are not working, it just says remote: "unknown command". Can anyone help me where can I find the pins to short on this phone?

Hello!
I would like to ask some help with my hard bricked G3 D855 16GB, i installed wrong rom
My english is not a best, and i dont dare to do anything. I have win 8.1. I dont know about Linux, and virtual PC.
I will very glad that someone can help me maybe via teamviewer. I also donate You. Please
If you think that You can help me maybe, please write me.

Urgent help needed + QFIL

Hi guys,
As mentioned in a previous thread, my F1 is soft bricked, only with the Oppo logo, no fastboot or recovery. I need to flash it again with a soft called QFIL (soft for Qualcomm devices). But it can't be done with the ordinary stock roms, I need a specific rom compatible with QFIL, like the ones used in the service centers. Is there anyone who can provide me with such a rom, or a link to download one in order to save my device?
Thank you

Can someone owning a Oppo f1 use QFIL to extract all the necessary files in order to flash them to my phone? I would be very grateful.

I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.

tb303lava said:
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
Click to expand...
Click to collapse
Hi, good news, I would be glad and would appreciate if you could send them to me.
Thanks in advance.

QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al

tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
Hi, I downloaded the zip, followed your steps and...my phone is alive and everything works perfectly. Thank you so much for your help. Couldn't have been done without you.

How to choose the port?? I am not able to choose the port. When i connect it to pc whole holding volume up button it doesn't show anything.

sir is your file is from optus australia
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
oppo f1f from optus australia need qfill firmware
i m from india set come to me for sim unlock
i follow this guide (How To unlock Oppo F1f - Guide unlock network Oppo mobile F1f from youtube) to flash modified firmware
but at the first step i flashed magictricks.zip & set goes to qdloader 9008 mode after reboot
so i need optus australia firmware,thanks in advance

Need some help - Msm8x39DownloadTool.exe not finding phone
Qualcomm HS-USB QSLoader9008 on COM3, according to Device Manager, yet Msm8x39DownloadTool.exe doesn't want to find it at all - Device not connected.
Any help would be really appreciated.
Edit: I have made some progress with some steps not included above.
1) Disable 'Driver Signature Enforcement' in Windows (Google is your friend)
2) Before installing the provided drivers, hold the Volume Up button on your phone, and insert USB from PC > Phone. This places the phone into QHSUSB mode and will be found in Device Manager, under Ports (The Android Bootloader Interface (fastboot) device has an ID of '18D1-D00D', while the QHSUSB device ID is '05C6-9008'.. bingo!).
3) Install the driver as directed. This will change the device from QHSUSB mode to HS-USB QDLoader 9008 on COM3.
Continue with the rest of the guide.
Stock recovery will be returned (v1.2 Rooted - I don't remember this). From here you can install Project Spectrum again, and return back to ColorOS after that.
Hopefully this helps.

tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
I tried this my phone has no Fastboot but recovery says V1.2(Rooted)
I tried this multiple times without luck.

As you still have access to stock recovery, you dont need to use download mode.
Simply put a stock rom zip on your sdcard and flash via the stock recovery. (might have to wipe data also if flashing a different version of the rom).
That will fix your phone.
To get access to fastboot (should you need to flash TWRP recovery), flash magictricks.zip via recovery.
If your phone is so busted you no longer have access to fastboot and recovery it will automatically default to QDloader mode (download mode).
If you want to access download mode while your recovery is still ok, switch phone off, hold Vol-Up (or Vol-down, can't recall) and plug in the usb cable.
AS LONG AS YOU HAVE ACCESS TO RECOVERY, USE THAT TO FLASH A STOCK FIRMWARE, GETTING THE QDLOADER DRIVERS CORRECTLY INSTALLED ON WINDOWS CAN BE RATHER TRICKY.

tb303lava said:
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
Click to expand...
Click to collapse
Hey man can you help I've soft bricked my oppo, please need flashing tool and rom

phaw16 said:
I tried this my phone has no Fastboot but recovery says V1.2(Rooted)
I tried this multiple times without luck.
Click to expand...
Click to collapse
HEY BRO HOW DID YOU FIX YOUR F1f SAME PROBLEM HERE I TRY THE STEPS ABOVE BOT INSTALLATION FAILED WHEN FLASHING A ROM please HElp me ver 1.2(rooted)

after flashing my f1f just going to RECOVERY then its auto turn ON and recovery again. bootloop to recovery any fix?

tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
thanks sir, its work
Edabigael said:
after flashing my f1f just going to RECOVERY then its auto turn ON and recovery again. bootloop to recovery any fix?
Click to expand...
Click to collapse
u neeed to flash OTA firmware from recovery, that what i did.. i use F1EX_11_OTA_002_all_201601170010.. put on your sd card and install

[Guide] Meizu M3 & M3s Unbrick

After experiencing help from the fantastic meizu community i have decided to make a guide for unbricking this device. This guide is aimed to help people with M3 or M3s that cannot boot. Please only follow these steps to unbrick your device
I am not responsible for bricked devices and exploding phones due to following these steps.
By following these steps you agree that it is you, yourself that chose to follow these steps and I will not take any responsibility for your loss.
Before Starting
1. Can you boot ?
No. Go to Question 2.
Yes. You have came to the wrong place, but feel free to finish reading.2. Do you see the flyme logo when you boot?
Yes. Goto Stuck on Flyme Logo
No. Go to Question 33. Do you see the Meizu Logo and phone reboots over and over
Yes. Go to Testing
No. You flashed a wrong or damaged preloader, chances of unbricking LOW, Go to Sp Flash Tool
Testing
1. Shutdown your phone by holding power button (if you can)
2. Turn on phone with power + volume up until vibrates
I see a flyme logo & recovery options, Goto Stuck on Flyme Logo
Still rebooting, Continue
3. Turn on phone with power + volume down until vibrates
I see the words 'fastboot' at bottom, Go to Sp Flash Tool
I see nothing, your preloader is dead, I cannot help you :crying:.
Sp Flash Tool
Requirements
Micro USB cable (plug phone to pc)
Computer (prefer windows)
Internet to download
1. Download SP_Flash_Tool Link below
2. Download Firmware for your device (latest)
M3 Link https://downloads.meizufans.eu/?dir=m3/firmware/stable
M3s Link https://downloads.meizufans.eu/?dir=m3s/firmware/stable3. Download scatter file 'MT6750_android_scatter.txt' Link below
4. Use sp_flashtool (flashtool.exe)
A. Uncompress SP_Flash_Tool.zip into pc
B. Uncompress 'update.zip' (the firmware)
C. Copy downloaded scatter file 'MT6750_android_scatter.txt' to update folder
D. 'Run as Administrator' flash_tool.exe file
E. Go to the menu Options -> connection - > usb full speed with battery
F. For download agent select DA_PL.BIN from the same folder
G. Load the downloaded scatter file 'MT6750_android_scatter.txt' in update folder
H. Select the 'download only' option (don't press download yet)
I. Untick all the ROM at the bottom.
J. Suggest to select and flash one ROM at a time (except userdata and boot)
recovery
m1img
md1dsp
md1arm7
md3img
lk
lk2
tee1
tee2WARNING do NOT flash 'preloader'
K. Flash by clicking download
L. Turn on and connect phone to computer when vibrate
M. Wait for download to complete, with a green tick.
N. After flashing all ROM, now flash boot.5. Power on your phone.
6. Did it work?
No, Still in reboot cycle, Retry from the top, or use different update.zip
Yes, i have boot to flyme logo but stuck in boot logo, goto Stuck on Flyme Logo
Yes, i have boot to flyme logo and my phone is back, Congrats.
Links
Scatter File: https://drive.google.com/file/d/0B3pRT6ewL6tqeWZhQThFRGVwbE0/view?usp=sharing
SP Flash Tool.zip:
https://drive.google.com/file/d/0B3pRT6ewL6tqSW8tNTQ1OFY2eXc/view?usp=sharing
Stuck on Flyme Logo
You see the flyme logo, and the logo spins couple every couple of sec and waited for over 30 min and still does not boot.
Get in recovery mode, two ways choose one.
Method one (easy)
1. Turn off Phone (Force by holding power button)
2. Turn on Phone with power + volume
If it does not work go to Sp Flash Tool or Method two
Yes, my devices is now in recovery mode, continue the steps, skip Method two
Method two (need computer and harder)
1. Turn on the Phone where the logo spins
2. install adb on computer (link http://forum.xda-developers.com/showthread.php?t=2588979)
3. Plug phone into computer and get drivers for adb
4. Type 'adb devices' in cmd
5. If you get a device in the list continue by Typing 'adb reboot recovery'
'adb devices' not displaying devices (try method one or install driver)
'adb reboot recovery' reboots phone but not to recovery, this confirms that the recovery partition is damaged follow the steps in Sp Flash Tool
Yes, my devices is now in recovery mode, continue the stepsDownload Firmware for your device (latest)
M3 Link https://downloads.meizufans.eu/?dir=m3/firmware/stable
M3s Link https://downloads.meizufans.eu/?dir=m3s/firmware/stable
Plug Phone (in recovery mode) to computer. Copy the downloaded file 'update.zip' into the removable device named 'recovery' (do not unzip)
Tick the top option (system upgrade) and click 'start'
Wait be patient.:fingers-crossed:
Special Thanks
Kokotonix, this is a build up of Kokotonix's post link here: https://forum.meizufans.eu/topic/65...om-bootloop-meizu-logo-and-constant-reboot/11
Meizufans, thanks for this website and everyone in it, where i got most of the information from.
Questions & Answers
Q. Why is my phone unrepairable if i can get to fastboot?
A. By not being able to access fastboot means the preloader partition is damaged and SP Flash Tool will not work.Q. Why is my phones not bootable.
A. It could be caused by many factors but mainly caused by failure in updating firmware due to no battery or incorrect flashing of ROM.Q. Why is it so hard to recover meizu phones
A. Meizu phone uses the new mt67xx which is not supported by MTK droid tool causing problems for users to obtain the scatter file, and also the locked bootloader leading the users not being able to recover the devices the traditionally using fastboot.Q. I have a m3 note can i use this method?
A. Yes if anyone gets there hands on the mt6755 scatter file for meizu. But if not NoQ. HELP ME IT'S NOT WORKING!!!
A. Calm down, follow the steps again, if not comment below.Q. How do i brick my device
A. Get root and flashify and flash a random .img as the kernel. (it works i tried)
Thank you for Reading and wish you for the best on this device.
Comment below for help and also share you success.

reserved

phone is dead(

More info? You lost your preloader
Sent from my M3s using XDA-Developers mobile app

bluecub1st said:
More info? You lost your preloader
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
after installing damaged rom its completely dont turn on only when you plug it to pc it recognize it like MTK Usb Port

logirus said:
after installing damaged rom its completely dont turn on only when you plug it to pc it recognize it like MTK Usb Port
Click to expand...
Click to collapse
Any display? or just black?
What rom did you install? If official you might be able to get a replacement through warranty.
Try SP Flash Tools, instruction in the first post. Chances are low but test if it detects after pressing download.

bluecub1st said:
Any display? or just black?
What rom did you install? If official you might be able to get a replacement through warranty.
Try SP Flash Tools, instruction in the first post. Chances are low but test if it detects after pressing download.
Click to expand...
Click to collapse
i installed from official firmware after installing it rebooted and never turn on no vibration nothing(no warranty i bought it from china on aliexpres) and please look at error ive got sp flash tool

Wrong download agent use the one I used in guide DA_PL.BIN
Sent from my M3s using XDA-Developers mobile app

Looks like it detects it phone u have hope
Sent from my M3s using XDA-Developers mobile app

bluecub1st said:
Wrong download agent use the one I used in guide DA_PL.BIN
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
i used DA_PL.BIN and got the same error, maybe bootloader is locked thats why this error?

The error shows when your device started before the software can flash anything. SP flash tools works with locked bootloader, maybe your preloader is 100% dead
Sent from my M3s using XDA-Developers mobile app

bluecub1st said:
The error shows when your device started before the software can flash anything. SP flash tools works with locked bootloader, maybe your preloader is 100% dead
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
and no way to repair it?:crying: i think im gonna trash this chinese cellphone away and never buy meizu again

No recovery, Fastboot mode is working. What should I do with this error?

Is there a way to work on me with meizu m3 max

Hi,
SPFlashtools fails to connect dead bricked Meizu M3S
Connecting to USB system recognizes as
MediaTek DA USB VCOM Port (COM7)
But other ports including Preloader are not
Do I have any hope to recover phone?

After following these steps, one by one, no matter if all went OK, my phone (m3s) won’t boot and it seems it is completely dead now. It can’t turn on. Power button looks unresponsive. What should I do? Is there any help?

many thanks for this guide @bluecub1st . The problem I have with my M3s is that it boots perfectly fine and works well, i just cannot enter recovery by using Volume + and power, and flashing a new firmware from inside Flyme OS just reboots the phone. I can enter fastboot though no problem, but i tried to do the SP Flash tool method listed and I just get this error message:
ERROR : S_TIMEOUT (0x412)
Any ideas how to fix this and get my recovery back? Really need some help so i can flash flyme 6...

i got error from sp_flashtool
ERROR : STATUS_SEC_DL_FORBIDDEN (0X0020004)
help me please sir

ERROR : STATUS_SEC_WRITE_DATA_NOT_ALLOWED
what to do ?

phone dead... thnks

ulefone Power 2 Development and Support

Ulefone power 2 Development and Support-
Basic Device Details-
Display- 5.5 inch
OS- android 7.0 Nougat
Chipset - MT6757T
RAM- 4GB
Disclaimer-
Code:
i am not Responsible for any damage to Your Device..
official Firmware-
https://drive.google.com/drive/folders/0B8NC4kBpjQhYV1lWOEtYWThRRms
twrp Recovery-
https://drive.google.com/open?id=0B1aXJDZjE8bvM0h0aTVEOEdBS1U
SP Flash tools and Driver-
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Magisk-
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
No verity opt-Encrypt-
https://www.androidfilehost.com/?fid=673368273298927206
extras-
Greenify for Battery-
http://m.hiapphere.com/apk-com.oasisfeng.greenify
Build.prop tweaks-
[Must Backup official before try-
https://forum.xda-developers.com/attachment.php?attachmentid=4248841&stc=1&d=1503381757
Guide-
Flash Firmware-
1. Install Vcom Driver Run SP flash tools, Load Scatter File , Check Everything and then click Download, as soon as connect your Switched off Phone.
Flash twrp-
Code:
fastboot oem unlock
fastboot flash recovery recovery.img
or use inbuild script
if you have Scatter then you can Flash with SP flash tools.
Root-
flash Magisk via twrp or you can also use Supersu 2.78XX.
Mod-
Will be added Soon....:good:
version- 3.00XX
Credit- XN Logos
Donation- https://Paypal.me/droiddeveloper
Please Don't create mirror Without the Link of This Page.

I tried it but it didn't work. twrp is installed but my phone doesn't boot into the system anymore. When I reboot it goes back to Twrp and then the touchscreen doesn't work anymore. I have to connect an USB-mouse. But it still doesn't boot.
When I try to flash or wipe sth it says "unable to mount"
I had to flash the original software again with SP Flash Tools

No flash No verity encrypt to Disable boot verification

XN Logos said:
No flash No verity encrypt to Disable boot verification
Click to expand...
Click to collapse
sorry but what does that mean?

So i used your TWRP Recovery, normally it should work and it does but why is my data shown as 0.
Thank you too. Please help

where is the scatter file?

gasperoni said:
where is the scatter file?
Click to expand...
Click to collapse
no Scatter included use Fastboot, or You can take scatter from ROM.

Ok but where is the recovery image file to flash via SP Flash Tools? I only see an exe-file saying "flash recovery" and a 12.6MB file called "rk" but it's shown me as a mp4-file

it worked!!! Thank yoU!! @gasperoni, just start "Flash Recovery.exe" and do what is written in the window. It's really easy.

i have include a Script which have ability to unlock bootloader and then flash twrp, if you flash with SP flash tool your Device not bootup because bootloader is Loacked. so Simply use Given Instruction Not SP flash.

any custom ROM

non yet

hm..i install twrp with your "flash recovery.exe", my phone reboots, i have to press "volume up" to unlock my bootloader. then trwp starts.
until here everything works fine. But when i am installing Superuser and restart my phone, it writes sth like "orange mode, your phone is untrusted" and just boots into twrp, touchscreen isnt working. So i have to flash it again, but i didnt achieve twrp of course :S

Unlucky25 said:
hm..i install twrp with your "flash recovery.exe", my phone reboots, i have to press "volume up" to unlock my bootloader. then trwp starts.
until here everything works fine. But when i am installing Superuser and restart my phone, it writes sth like "orange mode, your phone is untrusted" and just boots into twrp, touchscreen isnt working. So i have to flash it again, but i didnt achieve twrp of course :S
Click to expand...
Click to collapse
Same issue for me.
I tried twice to install the recovery with the .exe file. Both times I bricked the phone. Why?

kylebutler said:
Same issue for me.
I tried twice to install the recovery with the .exe file. Both times I bricked the phone. Why?
Click to expand...
Click to collapse
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash software says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.

ml11ML said:
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash softwhttps://forum.xda-developers.com/usercp.phpare says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
Click to expand...
Click to collapse
I had also issues using the flash tool provided on the Ulefone website, the same as you say (with the checksum). None of checksum-generating software worked for me, so I was searching long for an alternative and found this flash tool: https://spflashtool.com/. Using this tool, flashing worked for me perfectly even without having to bother with checksums.
Good luck!

pavelmracek said:
I had also issues using the flash tool provided on the Ulefone website, the same as you say (with the checksum). None of checksum-generating software worked for me, so I was searching long for an alternative and found this flash tool: https://spflashtool.com/. Using this tool, flashing worked for me perfectly even without having to bother with checksums.
Good luck!
Click to expand...
Click to collapse
Thank you very much for this! That tool works flawlessly unlike the ulefone garbage.
On another note... anyone know if there is source code for the power 2 to be found somewhere or did the dev just port another recovery somehow? I tried a while back just porting twrp by swapping files but i couldn't get the image to repack with the kitchen tool so i gave up.

ml11ML said:
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash software says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
Click to expand...
Click to collapse
hey, how did you set your IMEIs after bricking? I usually used Engineer Mode to set them, but thats not working since i am missing "CDS Information"

Unlucky25 said:
hey, how did you set your IMEIs after bricking? I usually used Engineer Mode to set them, but thats not working since i am missing "CDS Information"
Click to expand...
Click to collapse
Uh, i never even bothered to think about imei as it just worked without doing anything.

ml11ML said:
Uh, i never even bothered to think about imei as it just worked without doing anything.
Click to expand...
Click to collapse
ok nevermind, i found a solution..yeyy
so if anybody stumples across here, who has no IMEI set, CDS information in MTK mode and no rooted phone... u can set your IMEI in MTK engineering mode under "GPRS"!

flashing phone problem

hello everyone,
I want to flash LG k7, i downloaded firmware from firmwarefile.com
i opened sp flash tool and selected scatter file and pressed download (i chose download only and uncheked preloader)
when i plug the phone it gets detected by pc and i get error called S_Brom_download_da_fail(2004)
when i plug phone while pressing vol up+vol down
i get error called s_security_usb_dl_image_sign_header_not_found(6045).
when i try pluging phone into pc (without sp flash tool) it keeps getting detected and undetected.
Help me if u can. thanks in advance.

shizer98 said:
hello everyone,
I want to flash LG k7, i downloaded firmware from firmwarefile.com
i opened sp flash tool and selected scatter file and pressed download (i chose download only and uncheked preloader)
when i plug the phone it gets detected by pc and i get error called S_Brom_download_da_fail(2004)
when i plug phone while pressing vol up+vol down
i get error called s_security_usb_dl_image_sign_header_not_found(6045).
when i try pluging phone into pc (without sp flash tool) it keeps getting detected and undetected.
Help me if u can. thanks in advance.
Click to expand...
Click to collapse
You need LG flashtool, not SP flashtool.
https://www.gogorapid.com/flash-stock-rom-lg-k7/amp/
Try using your downloaded firmware with these instructions.
Sent from my SM-S767VL using Tapatalk

Database Info

welcome