MICROMAX A115 CANVAS 3D complete development here
The mobile has released today itself but got root as well as CWM Now this is the first tutorial on internet.
Note : If any one will copy this tutorial in their blogs or website please give a link to this website please.
How to root micromax a115 CANVAS 3D click here
Method 1 : Root required Very easy
1. Download CWM recovery.img and recovery manager from HEREhttp://d-h.st/6AP now Copy CWM recovery.img in SD card keep in root of sd card not in any folder, now install the recovery manager.apk normally
3. Now open the recovery manager app
4. Click on recovery in app menu.
5. There click on install recoveryD
D COM
6. Then click on the recovery image name of ‘recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your CWM recovery
Quote
SP Flash Tool method, root not required
1. Download MTK6577 Drivers.zip and unzip/extract on
your Windows PC, just run InstallDriver.exe to install
drivers.
2. Download CWMR 6.0.2.8 + scatter.zip and SP_Flash_Tool unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading
Agent. A new window will open.
Browse to the extractedCWMR 6.0.2.8 + scatter folder and select
MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see
multiple entries. Uncheck all entries
except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with
battery inserted + Press and Hold
Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
reserved
please attach cwm for a115 ...attach in this message as soon as possible
Android 4.2.2
Hey I want android 4.2.2 for canvas 3d can u help me
download mode problem
i did'nt get download mode in my celkon a115 mobile
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
RESERVEd
If you are facing the same or similar problems as this:
ManoharMaddineni said:
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013...n-one-rom.html
and here : http://forum.xda-developers.com/show....php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
Click to expand...
Click to collapse
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
this will work for other unbranded device?
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: http://www.tusfiles.net/agbdwr69sc8s )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
ManoharMaddineni said:
I'm currently on MIUI, I want to switch back to the sock rom of Canvas 4.
I tried following the tutorials
here : http://kalyani-786.blogspot.com/2013/12/micromax-canvas-4-a210-all-in-one-rom.html
and here : http://forum.xda-developers.com/showthread.php?t=2466694
but I had the same issue both times.
When I connect the phone (switched off) it connects (I can hear the sound) and then disconnects (again the sound) and starts charging.
I used the PdaNet+ drivers, the drivers of canvas hd (a116), and many others (Names of all the drivers further below the thread)
I tried using a different cable,removing the battery, different USB ports, multiple PC's, and 64bit versions of Windows 7, and windows 8/8.1, still, had the same issue..
Can someone tell me what I'm doing wrong?
What I did :
Open the SP flash tool (with admin permissions)
Load the scatter file
Check the box that says 'DA DL All With Check Sum'
Hit download
Connect the phone (switched off)
Now the issue starts, it connects, then disconnects, and starts charging.
The flash tool, it just keeps on searching for my phone.
Other Drivers I tried :
Micromax A116&A240 Drivers (from XDA)
a116_driver (from Micromax India download section)
AdbDriverInstaller (from XDA)
MTK6589_PdaNET_ADB_VCOM_Drivers (from the first tutorial link above)
PDAnet_4150 (from PDA website)
PdaNetA4126 (from PDA website)
MyPhoneExplorer_Setup_1.8.5 (someone referred)
Click to expand...
Click to collapse
Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436
badagila said:
this will work for other unbranded device?
Click to expand...
Click to collapse
Yep for every goddamn MTK device this is.
Yash98 said:
Yep for every goddamn MTK device this is.
Click to expand...
Click to collapse
what about on 3t technology tab? are familiar with it?
Yash98 said:
Here this is the answer to everything: http://www.tusfiles.net/7z4wk4m92et5
++++
Also this: http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
My phone just keeps disconnecting and re connecting to the PC when I try to connect it with the battery, sim, and sd card taken out. (also holding the vol+ button)
Also, can you upload the file to mediafire? TrustFiles has a lot of **** between the file and the user...
CHECK OUT THE NEW WIN 8.1/8/7 64 bit DRIVERS DIRECT BACKUP FROM A WORKING WIN8.1 64BIT INSTALL
BUT MAKE SURE TO: Disable Driver Signature Enforcement (google it exactly like this for instructions)
NOTE: This may show an attention mark in Device Manager. Completely ignore that!
Yash98 said:
If you are facing the same or similar problems as this:
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
Click to expand...
Click to collapse
I tried this on windows 7, and windows 8.
ManoharMaddineni said:
I tried this on windows 7, and windows 8.
Click to expand...
Click to collapse
Try this driver, now this driver comes from a backup from my Windows 8.1 Pro 64Bit install and should work on your Win8 64bit too,
though you HAVE to disable Driver Signature Enforcement (google it) or else it won't install..
https://mega.co.nz/#!AQwnVapB!ZaC53xZxSoG8dwRqLZFKguXvJJVuEshc4JPtz5yZYGs
can u say a flash tool for micromax a111?? is this flash tool can be used for micromax a111 doodle which is of same msm8225q chipset number ??
Yash98 said:
If you are facing the same or similar problems as this:
Then this is definitely a driver problem...
If you tried multiple drivers then post your OS and problem here and help will be there at your rescue...
Click to expand...
Click to collapse
Tried the new drivers, not working either. my phone just keeps charging. the flashing process does not start what so ever,,,
hi yash98
I have two phone
one is soft bricked and one is working
there is no ROM available anywhere for this phone
is it possible to extract the rom from the working phone and use it to flash to the bricked phone?
any tutorial on how to do this?
thank you
Urgent help required
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
have canvas 4 a210 problem with imei ( at command send fail) which occurred at changing rom, some on adviced sp flash
but cant use pc since there was charging hardware problem hence usb port cant be used hardware problem ( charging via external battery charging taken out) . need SP tool from sd card if available
thanks
@jjwaiting4u Currently impossible only through Micro USB port possiblity
help needed
yash got my phone repaired
there was no problem except rain water that had shorted, cleaning the components helped
well
downloaded sptool from another place (your having problem) ,mt 6589 scatter files, recover.imp
connected : usb in off mode... loaded scatter and recover file.......... clicked down load .................nothing
there is something i am not doing right....( PLease note only recovery and boot is with path others dont have any)
thanks for help rendered
jj
big mess
Yash98 said:
SP Flash Tool GuideFeatures:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod Edit...PPC Click Removed )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
Hi yash bhai
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?
Driver problem solved
I had the same problem, phone connecting then disconnecting.
Here is a solution for the problem.
1. Install latest drivers
2. Disconnect phone
3. Open SP Flash Tool
4. Select Scatter-loading and select the files required
4. Now here is the trick, in SP Flash Tool, go to ACTION > DOWNLOAD
5. Connect the phone (which should be switched off)
I have a Tab named Teracom-Lofty ALPS TZ100
1. I have CWM recovery installed in it with the help of MTK Droid Tools
2. i had backed Up using MTK Droid Tools (got a Zip file Named : TZ100_121214_backup_140618-105714 )
3. I tried a repartition Manager
4: I had 500 MB internal and 2.09 GB as phone storage
5. I Mistakely repartitioned it with 2.5 GB selected,it should have been selected as 2 GB
6. Then i rebooted into recovery and factory resetted to have partition successfully done
7. i Just Got my Tab turned On with just a blacklight glowing and nothing Works ( i could Get into CWN recovery mode)
8. So i thought of installing a custom ROM & downloaded this custom ROM 6572422-cleveri-rom-kitkat-wanna-be.html
9. Did not see that it was for MTK6572 , MY device is MT6575 Shown in MTK droid tool
10. installation completed succesfully,But even then it wont get booted,same problem as said in point 7
11. so i tried to install the ROM from the ZIP file of MTK droid tools backup (ie: my STOCK ROM i think) But installation Aborted now
12. Even i get the same problem
Please Help
This is my device configuration when it was working
Is in the attachment
Only Hard reset button is now used to turn the device OFF
What should i do to get the tab working
Bumping the topic, Guys please help me out
Hello Guyz,
As no Dev. Has been made a recovery for a12* at last after lots of efforts...
I developed A Recovery For Our Devices
A waiting is over
Introducing All new
"Philz Recovery" Only By me for
Karbonn A12*(Star)
link for recovery: https://drive.google.com/file/d/0BxQZF8lqd-BHaE8yRGtUekI0Snc/view
Software to flash recovery : https://github.com/DsLNeXuS/Rashr/...aad14/RashrApp/RashrApp-release.apk?raw=true
Known issues : Touch not working properly but u can use volume keys to move up and down and power key for selection...
Every thing else working well if u find any issue than u can comment below or message me on fb..
How to disable touch on recovery :
Just boot into recovery... select Recovery setting and then go to Gui setting and disable touch....
Now will discuss how to flash recovery
Steps:-
There Are 2 wayz to install this recovery...
I. INSTALLATION WITHOUT PC
1: download mobileuncletool or flashify from playstore or link given by me.
2: open mobileuncletool or flashify n click on update recovery n wait for completion.
3: After completion boot into recovery mode..
II. INSTALLATION WITH PC
1: Download spflash tool for pc n download scatter file for MT6572 devices n install all mtk drivers on pc.
2: Open spflash tool n load the scatter file that u have downloaded above.
3: Tick on recovery n then select recovery.img n click on download.
4: Now plug usb with ur pc n connect phone without battery n then connect usb cable with phone and insert the battery.
5: Installation process will start automatically n wait for completion..
THIS IS MY SECOND WORK FOR KARBONN A12*
ENJOY CWM BASED RECOVERY
Join my grp on Facebook
Karbonn Smart A12 Star Official
(Development & Discussion) https://m.facebook.com/groups/718681911514380?refid=18&__tn__=C
Hit thanks to appreciate my work... :thumbup:
Recovery for K12*
thanku bro....
Installation with mobileuncle tool
Ui of PhilZ recovery
Hello All this is a tutorial about How to flash TWRP without rooting Your MTK Powered Mobile..
Things You will Need. :-
~ A Pc
~ Any Custom Recovery For Your Device
~ SP Flash Tool
~ A Scatter File (For Your Chipset)
~ SmartPhone In Which You want to flash recovery
*Make sure You Have Mediatek Drivers Installed into Your PC
* Put SP Flash tool,Scatter File,And Recovery.img in the same folder
---------------###--------###------------###-------
First of All Switched Off Your Mobile
1. Turn on Your Pc [emoji12]
2. Open SP flash tool
3. load Scatter File
*Make Sure Only Recovery Box is Marked in SP flash tool
4. Click Download Button
5. Connect Your Device to PC using USB Cable
6. Wait for the process to be completed....
A green box will pop up. "Completed"
Unplug Your Device and and Press -PowerButton+VolumeUp - at the same time.. Keep Holding.. You can see You Have a Working Custom Recovery [emoji5]
Now You can Flash Xposed, SuperSu, or any ZIP that You want. .. [emoji4]
Sent from my Micromax E352 using Tapatalk