Database Info

Restore original recovery on Huawei u8110 (solved)

Hi people
To Restore original recovery on Huawei u8110
1.- Obtain the customized image for your operator (Yoigo Download Here).
2.- Copy dload folder to SD
3.- Shutdown the mobile, press Volume UP + End Call + Power Key
4.- Showing successful
5.- Remove battery one second ,then power on ,waiting till the os start up
Now the phone is like the first day!

Lyf ls-4503 soft brick how to solve it.

My LYF LS-4503 mobile stuck logo problem. boot animation worked but . not load the android os.

i have lyf ls-5002, and as far as i can help, try rebooting in recovery and then wipe data/factory reset.
it should work. if not, then we'll see for some other solution

ajith13 said:
My LYF LS-4503 mobile stuck logo problem. boot animation worked but . not load the android os.
Click to expand...
Click to collapse
Universal unbrick guide:
Terminology - types of bricks:
Soft brick - often occurs in the shape of a bootloop or any other problems with booting such as always getting to recovery or not getting past the carrier logo. This type of a brick, which shows some signs of life, can in most cases be fixed.
Hard brick - As the name implies, your phone can essentially used as a brick and it shows no signs of life. This kind of a brick is rare and in theory should be unfixable. However there are advanced methods of fixing your phones such as JTAG, but they require extra tools and accessories.
The decision:
Is my phone soft or hard bricked?
If you answer yes to all of the questions below you probably have a hard birck:
Test as said in order!
Nothing happenes when you hold or press the power button
You cannot get the screen to even turn on by pressing or holding any combination of buttons on your phone
Nothing happenes if you do the same as about but with your phone plugged into a charger
Nothing happenes when you plug your phone into a computer
When you plug in your phone into a computer it does not recognize it as a phone, storage or any other media device
Nothing happenes when you try all of the above again, but with removing the battery in between steps for 10 seconds and putting it back in again
Nothing happenes when you try all of the above again, but after leaving the phone plugged into a charger for 2 hours
If all of the questions are a "yes", then you either have a broken charging port and and a discharged battery or you have a hard brick.
The unbricking:
There are many methods of unbricking and they are all different to each phone. Here I will list the most common methods that often succeed.
Samsung users skip to 4. method.
1. If you have access to a stock recovery:
Method 1:
1. Shut down / turn off your phone.
2. Boot into Recovery mode – hold down the volume down button and then hold the power button (the button combination is different for every phone. Look yours up on Google)
3. Use volume keys to navigate the menus, and power button to select the menu items (Again, might be different for every phone)
4. Choose “Wipe Cache Partition”.
5. Choose “Wipe Data / Factory Reset” to delete all your settings and apps, using the correct ROM.
6. Reboot your device.
Method 2:
Download the stock rom for your phone. It should be in ".zip" format. Make sure it's the official version
(Find it by Googling something like "[your phone model] stock rom")
Put the file on your phone's external SD card.
Make sure that the rom is for your exact phone model.
1. Shut down / turn off your phone.
2. Boot into Recovery mode – hold down the volume down button and then hold the power button (the button combination is different for every phone. Look yours up on Google)
3. Use volume keys to navigate the menus, and power button to select the menu items (Again, might be different for every phone)
4. Select "apply update from external storage"
5. Navigate to the zip file you copied to your phone
6. Install it.
If you get Status Error 7 that means you didn't download an official stock rom.
2. If you have access to a custom recovery:
Method 1:
Try stock recovery method 1
Method 2:
1. Find a stable custom rom for your phone or if you want to download the stock rom
Make sure that the rom is for your exact phone model.
2.. Copy the zip file to the phone's external SD.
3. Install the zip
(If you have a custom recovery you probably know the drill)
3. If you have access to fastboot mode:
First install ADB and fastboot drivers (if you haven't already):
To install it on windows there is a handy tool called the 15 Second ADB installer which will install pretty much everything you need.
On Ubuntu install with:
Code:
sudo apt-get install android-tools-adb android-tools-fastboot
On Fedora:
Code:
sudo dnf install android-tools
On OS X using Homebrew:
Code:
brew install android-platform-tools
Once you have the drivers installed you have to find a recovery image for your phone to install a custom recovery.
You can try one of the popular recoveries such as CWM or TWRP.
You need to get the recoveryNameHere.img file for your phone.
Find it by Googling:
"[your phone model] TWRP recovery"
or
"[your phone model] CWM recovery"
Make sure that the recovery is for your exact phone model.
Now on your phone enter fastboot mode:
Turn your phone off.
You can try different button combinations. For my phone it's holding power and volume down buttons.
Once you're in fastboot mode plug your phone into a computer and open your terminal/cmd.
Type in:
Code:
fastboot devices
You should see a list of devices. There should be only one device ID number.
If you see the ID it's working. If you don't you didn't install the Google USB driver properly (on Windows) and if it says "'fastboot' is not a recognized command" or "No command 'fastboot' found" then you didn't even install your drivers.
If you have problems with installing Google "how to install adb and fastboot drivers"
Now that you know fastboot is working type in:
Code:
fastboot flash recovery C:\Path\To\Recovery.img
Replace "C:\Path\To\Recovery.img" with an actuall path of the recovery file you downloaded.
It should say success.
If it doesn't try to execute:
Code:
fastboot oem unlock
This will delete all data you had on your phone (games, game progress, apps...).
Now try
Code:
fastboot flash recovery C:\Path\To\Recovery.img
again.
Once you're done type in:
Code:
fastboot reboot
And your phone should still not work. Now what you have to do it try the custom recovery method above (number 2.)
4. If you have a Samsung device:
Try this tutorial of unbricking with Odin: click here

i cant take out my battery

Go into recovery mode. Choose Wipe cache/delvik. Then reboot. If that doesn't work you're going to have to go in recovery and factory reset

Lg k3 ls450
Hola buenas tengo un problema, mi LG enciende pero en la pantalla a cada rato aparece un mensaje diciendo que el ui del sistema se detuvo y así consecutivamente, ya intente hacer hard reset pero me aparece un mensaje de que el espacio de almacenamiento es insuficiente, así que. como podría solucionarlo, pensé en volver a instalar el firmware pero no encuentro kdz, o el LGUP .dll podrían ayudarme.
por favor
mod edit - translation added according to Forum Rules
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Click to expand...
Click to collapse
-=-=-
Hello, I have a problem, my LG turns on but on the screen every time a message appears saying that the system ui stopped and so on, I tried hard reset but I get a message that the storage space is insufficient, so. as I could solve it, I thought about reinstalling the firmware but I can not find kdz, or the LGUP .dll could help me.
please
-=-=- @DeyvidRo

[Completed] DMTECH 1032DC Bricked

Hi!
This method is not working for me;
first of all download original dmtech 1032dc firmware form here
then extract OriginalFirmware_tablet1032dc.zip
In the folder TF_Update you will see these files: - update.zip - uImage_recovery - uImage - Developing boot.bin - factory_update_param.aml
• Copy those files to the root of your microSD card.
• Insert the microSD card into the tablet.
• Press and hold the volume - and power for about 15 seconds.
• The installation will start automatically, an Android icon and a line moves are displayed.
• wait until the process is finished and voila your tablet is working now!
What happened was, that i did the ABOVE, the installation started, but got never finished, it continued until the battery ran out.
Now it stops with the logo
I cannot go into recoverymode anymore, is there a special combination with reset, Powerbutton, Volume- and Volume+?
Or any special software to flash it?
Kindly Marc

marcooleo said:
Hi!
This method is not working for me;
first of all download original dmtech 1032dc firmware form here
then extract OriginalFirmware_tablet1032dc.zip
In the folder TF_Update you will see these files: - update.zip - uImage_recovery - uImage - Developing boot.bin - factory_update_param.aml
• Copy those files to the root of your microSD card.
• Insert the microSD card into the tablet.
• Press and hold the volume - and power for about 15 seconds.
• The installation will start automatically, an Android icon and a line moves are displayed.
• wait until the process is finished and voila your tablet is working now!
What happened was, that i did the ABOVE, the installation started, but got never finished, it continued until the battery ran out.
Now it stops with the logo
I cannot go into recoverymode anymore, is there a special combination with reset, Powerbutton, Volume- and Volume+?
Or any special software to flash it?
Kindly Marc
Click to expand...
Click to collapse
Hello,
Where did you find the instructions? Please post your query in the same thread.
-Vatsal

How to Root the CAT s60 ... ... and more !!!

Since i am afraid, that my Guide will dissapear in the other Thread,
i post this guide in a new Thread !
I have just uploaded a collection of, how i have named it, - s60 essentials - there are ALL files included to flash stock, update to .033, flash twrp recovery and root.
(this is for Win7 x86, you have to check if it works for other versions yourself, sy..)
Here is my collection
HOW TO.... Stock, Update, custom recovery and root your s60 !!!!
Disclaimer: if you brick your phone, it's your fault, i have tested this way of rooting my s60 now for a several times and it works 100%
SO READ TWICE, CHECK TWICE, BEFORE YOU CLICK ONCE !!!!! i will not take any responsibility !!!
Thanks to everybody who contributed here in this thread (Cesarq, OpenMinded, Tuschi, BetonJohn, etc.......) the software in the link
is the collected data, freely available in the net and linked in the original Thread several times, i have only bundled one package and wrote
this, hopefully usefull guide.
in principle do as follows: (I will only explain once how to sideload or load via recovery, afterwards i will only state what kind and what file)
Prerequists
- install USB drivers (for recovery and adb)
- install "minimal ADB and fastboot"
- copy the two updates (update032 & update033) into the folder, where you have installed "minimal ADB and fastboot" (makes live easier later)
- install QPST (the version of QPST is the one from Androidmtk and should be virusfree
(The version of QFIL in my collection is the one without reboot, so you have to reset/reboot your phone manually (resetbutton below hatchdoor on your phone) whenever
stated in this guide.
- format micro SD card in fat32 ! and copy SuperSU.zip onto it.
- connect a WORKING USB cable to your phone (Not to your PC atm !!!)
getting twrp (for saving your old firmware only)
- power off phone.
- start minimal adb on your PC
- start QFIL (part of QPST) on your PC
- press VOL+ & VOL- simultanousely and connect phone with PC (it will vibrate once, top right LED starts blinking red, screen stays black) - DOWNLOAD MODE -
(just in case: to leave Download mode, press and hold power button for apprx. 15 seconds)
- as soon as you connect your phone to the PC, QFIL should show the Phone/port in the topline allready, if not, either try to manually select the port, or you probably still have
a problem with the USB drivers !
- tick in QFIL Flat Build (top left)
- QFIL - select Programmer, "browse" to the saved location of "update-twrp-recovery-nobootpatch" and select the "prog_emmc.blablabla...mbn" file and doubleclick
- QFIL - "load XML" ,select rawprogramm, doubleclick, select patch0, doubleclick
- QFIL - click on "download"
- if everything was OK up till now, it should start download - BE PATIENT- and read the status window on QFIL, when it shows "finish download"....
- disconnect phone from PC
- press and hold simultanousely POWER and VOL+ and use a small tool to push the reset button on the phone under the hatch, while still pressing Power and Vol+ !
- the phone should now be in twrp recovery. If so, do a full backup now to your (allready inserted and fat32 formatted) microSD card!!!
when done
- Power off your phone !
flashing stock 31.02
- enter download mode again (Vol+ & Vol-, connect phone to PC.......)
- this time in QFIL, browse in programmer path to "s60_stockFW_31.02" and select the programmer from there
- load XML's (the onces that belong to Stock31.02)
- start download... this will take a while !!!! BE PATIENT !!!!
- when QFIL status window shows finish download, push the reset button on the phone and let it reboot.
- it is normal, that the phone should restart itself 2, maximum 3 times at the first start, but sometimes it ends up in a bootloop (Cat Logo, reboot, CAT logo, reboot, etc, etc, .......)
(The bootloop mainly happens, if you clear, in twrp recovery, the whole OS, but that's no issue either...)
- if it ends up in a bootloop, no worries, just continue ! Believe me, i did the process now several times ! )
you are back on stock 31.02 !
-Power off your phone again
Updating to 032
- bring up minimal ADB sideload on your PC (start it, if not allready done in previous step (getting twrp)).
- press and hold POWER and VOL+ button on your phone - RECOVERY MODE -
- when in stock recovery select (with Volume keys) "adb sideload" and click the Powerbutton
- connect your phone to the PC
- on PC, type into the black ADB Terminal window "adb sideload update032.zip" and hit enter
- if drivers are there, phone will start downloading the update now.
- when complete, select clear cache, and clear data then reboot your phone.
- again, same as in the step (flashing stock), if bootloop, no worries, just continue, if it boots up, let it boot up and then..
you're on 032 now
- Power off the phone again
Updating to 033
- do the same steps as described under "Updating to 032" only difference, type in adb window " adb sideload update033.zip"
After updating to 033 your phone should boot up normally now, NO MORE BOOTLOOP !
getting twrp
- this is the same step as above "getting twrp" only difference, this time, no backup needed and...
- when in twrp-recovery, select "install" browse to your micro SD-card, and...
- install SuperSU.zip from SDcard.
- once more, clear cache and data and reboot.
The phone should boot up now, you should be on FW 033, with custom recovery and root !!!
That's all !!!

Would a TWRP or fastboot flashable stock recovery let us apply future OTA updates without wiping and starting from stock 031 if we're using systemless root like Magisk?
From stock recovery you can reboot to bootloader which puts us in fastboot (you can select boot mode with Vol +/-), so I'm thinking if we could boot TWRP from fastboot (without flashing, obviously), we could back up the stock recovery. Then when the next update comes around, we flash stock recovery back, apply the update, then reflash TWRP.
I tried fastboot boot recovery.img from update-twrp-recovery-nobootpatch but I got
FAILED (remote: unknown command)
and rebooting into recovery from there just got me stock recovery which makes sense.

QCN please
Hi guys, can anyone share me QCN backup of S60 because i've lost it! Thanks.

Last update for Android 6.0 was from 766 days ago.
Any suggestions on how to patch?
Thanks a million

CrDroid For A30s

Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
*YOU WILL NEED A PC*
LINK FOR CRDOIRD :- https://drive.google.com/file/d/1FVhCtp6qvvjty1otP4By--caZkp0p4DP/view?usp=sharing
BUGS:-
1. MTP (CAN BE FIXED BY EUREKA KERNEL)
2. LOW VOLUME (CAN BE FIX BY ADJUSTING EQUALIZER NOT PERFECT BUT BETTER) (SEE THE SCREENSHOTS FOR EQULAIZER SETTINGS)
3. YOU
HOW TO INSTALL.:-
*MAKE SURE YOUR PHONE BOOT LOADER IS UNLOCKED*.
1. TURN OFF YOUR PHONE.
2. PRESS THE POWER BUTTON AND VOLUME DOWN BUTTON AT THE SAME TIME FOR A FEW SECONDS TILL A SCREEN APPEARS.
3. PRESS VOLUME UP BUTTON, YOU WILL ENTER INTO THE DOWNLOAD MODE.
5. CONNECT PHONE WITH PC
6. ONCE YOUR PHONE INTO THE DOWNLOAD MODE. JUST CONNECT YOUR PHONE WITH THE PC WITH ORIGINAL DATA CABLE. A MESSAGE WILL APPEAR ON THE ODIN SCREEN THAT THE PHONE IS CONNECTED.
7.. SELECT CRDROID.TAR IN AP
8. GO TO OPTIONS-SELECT NAND ERASE.
9. NOW FLASH
10. IF YU GET BOOTLOOP. TO FIX THIS PRESS VOLUME DOWN + POWER BUTTON. WHEN PHONES SCREEN GOES OFF QUICKLY PRESS VOLUME UP + POWER BUTTON. YOU WILL BOOT IN TWRP.
11. NOW FORMAT DATA. ( IF YOU GET FAILED TO MOUNT DATA ERROR THEN STAY HERE OR GO STEP 15)
12. GO TO ADVANCE WIPE- SELECT DATA- RESIZE OR REPAIR PARTITION- REPAIR PARTITION.
13.REBOOT RECOVERY
14. FORMAT DATA. REBOOT-SYSTEM
15. NOW BOOT YOUR SYSTEM.
16. AFTER BOOTING (*IF YOU WANT TO INSTALL GAPPS*)
17. POWER OFF THE PHONE BOOT TO TWRP BY PRESSING VOL UP + POWER BUTTON AT SAME TIME.
18. *IMP* ADVANCE WIPE-SELECT SYSTEM- RESIZEOR REPAIR PARTTITON- RESIZE PARTION- SWIPE TO RE-SIZE
19. DOWNLOAD GAPPS:- https://opengapps.org
20.. DOWNLOAD ARM64- 10.0- PICO (*MY CHOICE*)
21. PLACE IT IN INTERNAL STORAGE OR SD CARD. YOU CAN DO IT USING TWRP IF YOU ARE USING PC
22. FLASH- MICRO SD (IF YOU HAVE GAPPS IN MICRO SD CARD )- INSTALL
23. FORMAT DATA
24. REBOOT-SYSTEM
25. NOW SETUP THE PHONE
YOU CAN FIX BIG CORNERS IN SETTING-CrDroid SETTINGS-USER INTERFACE-ROUNDED CORNERS-UN-SELECT DEFAULT VALUES- SET THE VALUE TO 20.
THANKS FOR SEEING!
HAVE A GOOD DAY.
TELL ME IF YOU HAVE ISSUES
BYE BYE*
NEW VERSION SCREENSHOTS(V12.12)

i have flashed this rom...this is freezing suddenly and restarting the phn....i think this is happening for eureka kernel....cauz i tried the eureka kernel before and my phone was freezing then with one ui 2.0

this rom have crash fingerprint

O sensor de digital não funciona :/
Translation: The digital sensor does not work: /

Alguém conseguiu fazer funcionar o simcard ou o leitor biometrico?
Translation: Has anyone managed to make the simcard or biometric reader work?

Hallo Sir ... I am New Here.
Can you please make Lineage 18 for our device

this rome is not working an i have downloaded all custom roms for SM-A307FN and no one work
if any one find somthing pleas tell me

this rom is rooted or not ?

Ahmed_heshmat said:
this rom is rooted or not ?
Click to expand...
Click to collapse
root manually

Every time I'm on whatsapp call, the other person can hear the multimedia sound of my phone through the call, is there any way I can fix that? Other than that, the rom is the best I've tried.