Note Until i have 10 posts, i can't put External links or pictures .So to see the full article with links and images please visit the source : cloudandro.com/Topics/revu_5_en.html
Prerequisite :
This root is for the 4.2.2 version.
Installation on your responsibility.
These steps will increase the counter.
Use the original cable of the phone.
Your mobile should have 70 – 80% battery.
Download Samsung Keys
Taking a backup copy of the phone.
Unzip attached file using Winrar,WinZIP or 7zip.
Method of installation:
Download recovery file in your computer CWM-touch_i9082_chotu.tar.zip.
After unziping it you will get this file : CWM-touch_i9082_chotu.tar.md5.
Download Odin3 v3.04 unzip,and run it.
Place recovery file in the PDA box .
Now, switch off your phone.
Then boot it into Odin/Download mode by pressing and holding Volume down + Home + Power Key (long Press).
I9082 DownlodingMod
Now connect the phone and start it.
You will see a warning: Press the volume up button.
Note: If failed Delete the MD5 the name will be like this CWM-touch i9082 chotu.tar and then try again.
Now download the root file UPDATE-SuperSU-v1.51.zip and Place it in the external memory(sdcard).
Now switch off ypur phone.
Then boot it into Odin/Download mode by pressing and holding Volume down + Home + Power Key (long Press).
Choose these commands:
install zip from sdcard.
choose zip from sdcard.
Look for the recovery file.
Choos it and do yes.
After installing return to main menu and choose : reboot system now
Now your phone is routed.
Thats all .
hello, how about everyone. I am a new user so I thank all the Collaboration. Let's see; I've Decided Install on my G6-L33, the EMUI 3.0 (B370), Performing All Steps correctly, he lost the boot image from my mobile, works well alone but the rom's most any type of home (recovery, fastboot, Restart, Shutdown) presents me An instance of whites with another instance of gray part above (see photo) ... and he tried methods para change boot logo (no bootanimation) sin embargo not Solve The Problem, les I thank all ITS comments. My mobile starts normally, does not affect OPERATION.
1. redownload the rom file from official location. ( http://consumer.huawei.com/kh/support/products/downloads/detail/ascend-g6-4g-kh.htm?id=38361 )
It is the official for g6-l11
2. put the update.app into dload folder on your sd card
3. shut down your phone
4. hold volume+ volume- and power button. When itstart to boot release the power button, and hold both the volumes.
5. you will see that firmware flashing begin, wait for the end
after that you will have everything in place
I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?
I dont now if works..., and this is B360!
dvf1278 said:
I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?
Click to expand...
Click to collapse
ROM B360 AVAILABLE for G6-U10.
-----
- Download official B136 Rom from austrian Huawei site
http://download-c.huawei.com/downlo...343&version=54000&siteCode=at&hc_location=ufi
- Extract the dload folder to PC and copy to SD card.
- Go to Options→System Info→Update System→Local Update
---- Phone will reboot in recovery mode and install the update. At the end you'll have Emui 2.0 JellyBean Rom B136 as your system
------------ If you previously flashed a custom recovery (i.e. CWM or TWRP) deleting the stock one, you'll get an error similar to "E:Invalid command argument". You have two solutions:
---------------- 1)Turn off the phone, press Volume DOWN+Volume UP+Power buttons, release power on boot, vols when start to flash it.
---------------- 2)Download this, is the original recovery image, https://docs.google.com/file/d/0B0xf81pxOQgxTVpxU3RaTWNyRWc/edit and flash it by fastboot with ADB,
fastboot flash recovery recovery.img
- Now reboot the phone and it should notifies of an available update to KitKat, rom B360. Simply accept the update.
- If update doesn't get proposed, download this file:
update.zip - https://drive.google.com/file/d/0B0xf81pxOQgxcWs1QVlLNllPVlE/view?usp=sharing&hc_location=ufi&pli=1
- Put the archive update.zip into "HwOUC" folder inside the sd-card, if dont have it you can created
- Go to Options→System Info→Update System→Local Update
---- Your system will be updated to Emui 3.0 KitKat Rom B360.
------If not, turn off the phone, press vol UP and power, clean cache and go to update by zip, look for the file update.zip
------Done
If you have missing apps in the end, to fix you need bootloader unlocked:
!!!!!!»»»»»»»»»»»How to Unlock your bootloader««««««««««««!!!!!
1º Request code to Huawei by e-mail
Ex:
" Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name) "
->This are the e-mails (Use the PC, is better) :
[email protected]; [email protected]
PS: When copy paste to send it, please change what is inside of ( ), there are how send it like it is!!!!! Belive me, you never, never,never gona recive anything if goes like this!!!!
When you get the code!
You need ADB!
This one have already a software to unlock the phone
( Huawei_Bootloader_Unlocker ). and , than press "Desbloquear":
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
Only need to extract ADB folder from zip to desktop
--------------------------------------------------------------------------------
-with phone ON, turn on debug mode, open ADB_TOOLS folder and execute Boot_in_fastboot_mode.exe
»»»» OR
->Turn off the phone
->press vol - and power, release power on boot, release vol when you see the fastboot screen
--------------------------------------------------------------------------------
->plug the usb, let pc install the phone
->see if pc find the phone, execute See_if_phone_is_recognized.exe
-> must say samething like - 584566515 fastboot
-> if not, you must install the drivers for the phone or change the usb door.
->execute Huawei_Bootloader_Unlocker from the folder ADB TOOLS
->insert the code where says "Unlock code"!
->click in "desbloquear!"
->phone reboot and do a factory reset.
->Done
Now you need CWM recovery and kinguser.zip to root, Download this files:
-CWM-U10.zip:https://mega.co.nz/#!XpYxGC6D!K0dE4-sr7LmauOrVTRwlE5Qx8eX-mKfqNkTXteUkrTU
-UPDATE-Kinguser-3.4.0:https://mega.co.nz/#!bhp2AZyL!6R1zHtVrWC08tkHAcxv5XtwfjZjx_VbjV3qH2ezELuo
1. Unlock bootloader: https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/
2. Download adb if you dont have it, from the link above:
3. extrad ADB TOOLS from zip to desktop, open it and open ADB_TOOLS
4. In PC go to c:\Windows\System32 look for cmd, COPY and paste in ADB_TOOLS.
5. Press volume down and power button to go in fastboot mode, and plug the phone in to PC.
6. Open cmd (doble click in cmd)
7. Type this:
Fastboot flash recovery CWM.img
fastboot reboot
8. Copy "UPDATE-Kinguser-3.4.0.zip" to your SD CARD
9. Turn OFF the phone, press vol + and power, release power on boot to go to recovery mode CWM
10. clear cache
11. Press install zip from sd card
12. Click update UPDATE-Kinguser-3.4.0.zip
13. wait for confirmation and after that when it complete REBOOT your phone
14. After rebooting go to Google play and install any root checker to see if is OK.
Now fix Cust:
The Roms are created for a specific provider , with a specific configuration. A ROM can be compatible with various models , such as U10 with the U251 , L11 with P7mini or even between the same zone countries .
But in the end we find small problems , such as lack of Shortcut Bar in version 4.3 and lack of applications in version 4.4 ! It has to do with the configuration of the CUST folder. How to fix ? We need access ROOT and an explorer as the Root Browser , which can be found in Google Play.
With Root Browser, in this case, we will go to folder /DATA and seek the custom.bin file, open it as a text file, you will see something such as vodafone/pt, for example, now we left the folder /DATA and go to the folder /CUST , we open it and we will usually find a folder with the name hw, we will change the name of it to the first name that we saw in custom.bin in our example will is vodafone, use small font, now we entered the vodafone folder and we will find another folder that usually his name is normal, let's switch to the second name of our exemple which will be pt, use small font!
Now just leave the Root Browser , turn off your phone , enter the recovery , perform a factory reset and start the phone normally.All will be fixed.
Tell if works!
like write data
[Hi, I have the g6 u251 but when i try to install it, says something like write data error update.app is a invalid package, how do i fix it?
Hi
My Asian huawei y6 II cam-l21 does not receive any update! So I'm think about change it's firmware and I found the following link:
ministryofsolutions.com/2017/09/huawei-y6ii-cam-l21-firmware-b197-europe.html
The download link:
update.hicloud.com:8180/TDS/data/files/p3/s15/G1166/g104/v95607/f1/full/update.zip
The Installation Method:
-Backup all important data
-Charge battery up to 80%
-Enable OEM unlock in developer options.
-Your phone should not be rooted.
-Make dload folder on sd card
-Extract update.zip and copy update.app to dload folder, Switch off your phone and hold 3 buttons (volume up, volume down, and power) until you see update start screen.
Do you think it's safe to install the firmware? I'm using English language so I have no problem with Europe version.
Sorry for my english.
Is there a way to replace the Vodafone-Rome with the Stock-Rome on the Oppo find x2 Neo?
Thanks in advance
wedras
Hello
You must download the stockrom and replace it in the ColorOs folder on your phone.
Then turn off the phone, reboot on revovery mode (press vol - and power button till reboot)
Then, choose English , Install from storage, from phone storage and click ColorOS, then choose your stock ROM).
Enjoy