Hi! to xda community.
Note: Only (Ulefone}Star N9330
CWM recovery and Installation suitable for all devices and modifications N9330, so as size of the blocks identical !!!
The attached archive contains patched CWM Bruno and scatter file N9330, also lies the archive original recoveri for rollback ...
1. Flash SP_Flash_Tool_v3.1224.01, in the archive is sсatter file N9330 ... recovery.img
2. Reboot device.
3. Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip or CWM-SuperSU-v0.96.zip (copy to sdcard)
4. Power off device
5. Enter Recovery Mode: power+volume up+
6. Choose zip from sdcard
7. If you have a lot of file then use Volume-Down to go to
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip & press the Power button
8. Use Volume-Down to go to Yes – Install Root_Superuser_3.1.3_Busybox_1.20.2-Update1-
signed.zip & press the Power button again
9. Install from sdcard complete. Go Back to the main menu
reboot system now
Enjoy
Special Thanks Bruno for CWM
Download:
1.Factory stock firmware ROM 4.1 JB on October 25, 2012 (the camera ov5647) 512 RAM
20121025_e1901_v77_gq2002_5647_notv
2. MOD ROM N9930 512 RAM for camera ov 5647 512 RAM
JB_4.1.1_e1901_v77_gq2002_ov5647_MOD_RU
3. Dump stock firmware ROM 4.1 JB on November 26, 2012 (the camera p017) 512 RAM
N9330-20121126_e1901_v77_gq2002_9p017_fg
4. Factory stock firmware ROM 4.1 JB on December 3, 2012 (the camera p017).
N9330-20121203_e1901_v77_gq2002_9p017_fg
5. Dump stock firmware ROM 4.1 JB on December 3, 2012 (the camera p017) of N9330 1Gb RAM (contains CWM recovery and root supersu)
N9330-20121203_e1901_v77_gq2002_9p017_fg
6. Dump stock firmware ROM 4.1 JB from 12 December 2012 (the camera p017) 512 RAM
N9330-20121212_e1901_v77_gq2002_9p017
7. Dump stock firmware ROM 4.1 JB on December 25, 2012 (the camera p017) 512 RAM
N9330-e1901_v77_gq2002_20121225
8. MOD ROM N9330 512 RAM for camera 9p017 512 RAM
JB_4.1.1_e1901_v77_gq2002_9p017_MOD_RU
9. MOD ROM N9330 512 RAM for camera ov5647 512 RAM version 1.2
JB_4.1.1_e1901_v77_gq2002_ov5647_MOD_RU_VER_1.2
compayn fordanc
Hi there, thx for upload...but i have one Problem.
Flashing the recovery works, but it's not possible for me to enter recovery?!?
When i push "power on" and " volume up" the same time the phone gets an endless loop and nothing happens....when i release the buttons it boots normally up, but no recovery?
Maybe i did something wrong?
Did you tested?
Mawe79 said:
Hi there, thx for upload...but i have one Problem.
Flashing the recovery works, but it's not possible for me to enter recovery?!?
When i push "power on" and " volume up" the same time the phone gets an endless loop and nothing happens....when i release the buttons it boots normally up, but no recovery?
Maybe i did something wrong?
Did you tested?
Click to expand...
Click to collapse
who has cycle reboot, try flashed SP_Flash_Tool to patched boot.img... flash the together custom CWM of archive CWM_Bruno_N9330... tested on two devices N9330... all works as charm
Regards
feropont
I mean your Point 5
5. Enter Recovery Mode: power+volume up+
Click to expand...
Click to collapse
does not work for me!
While holding power and volume up nothing happens.....i get an endless loop! I saw android symbol (the one with the starting rocket) and then black screen, than again the android symbol, black screen....and so on....
when i do this prcess while connecting to usb to PC i can here connecting, unconneting signal......
when i release the buttons the android system starts normally but like i said no access to the recovery mode.....factory mode works (power and volume down)
What exactly is this new file for? I will test later this day, when more infos will be available.....thanks for your help and sorry for my bad english
i haveflashed now your File and now the phone gets an endless loop all the time, it doesn't start anymore (((
Please help me
Mawe79 said:
i haveflashed now your File and now the phone gets an endless loop all the time, it doesn't start anymore (((
Please help me
Click to expand...
Click to collapse
Are you sure at you on hands namely Star N 9330 and not other device? I'm not sure in it, in Russian forum already enough guys which flash CWM and Boot, and all work. You necessary flash original files with his device and be attentive next time. Sorry
Yes i have 100% the N9330 and your files doesn't work!
And your Boot.img crashes my phone
Flashing (your original firmware) isn't working too......the phone is in Bootloop.....so please help me!
feropont said:
Are you sure at you on hands namely Star N 9330 and not other device? I'm not sure in it, in Russian forum already enough guys which flash CWM and Boot, and all work. You necessary flash original files with his device and be attentive next time. Sorry
Click to expand...
Click to collapse
Mawe79 said:
Yes i have 100% the N9330 and your files doesn't work!
And your Boot.img crashes my phone
Flashing (your original firmware) isn't working too......the phone is in Bootloop.....so please help me!
Click to expand...
Click to collapse
attached Stock boot.img from N9330... if brick not restore, that at you not N9330, and one of the many modifications clone. Miracles do not happen...
Regards
feropont
what should I say? Big sorry first!
You are right mate, and i am the stupid guy :/
It is not a N9330 it is a Note2 "M Pai Royalty" you can see it for example here:
http://www.aliexpress.com/item/In-stock-New-Arrival-M-Pai-Royalty-Note-2-Smart-Phone-Android-4-0-MTK6577-Dual/670182900.html
do you know where to get or find stock rom or custom rom to get the phone back to life again?
Hey guys i have few questions?...how is the camera of this mobile is it really 8mp?...and how is the screen...is it dull and pix-elated??..compared to other branded phones screen?
i think it's real 5MP and interpolatet 8MP, Display looks nice!
ckethan said:
Hey guys i have few questions?...how is the camera of this mobile is it really 8mp?...and how is the screen...is it dull and pix-elated??..compared to other branded phones screen?
Click to expand...
Click to collapse
I can confirm that Its work properly on my Star N9330. Thank You.
Thank you. Its totally work good on my Star N9330.
feropont said:
Hi! to xda community.
Note: Only (Ulefone}Star N9330
The attached archive contains patched CWM Bruno and scatter file N9330, also lies the archive original recoveri for rollback ...
1. Flash SP_Flash_Tool_v3.1224.01, in the archive is sсatter file N9330 ... recovery.img
2. Reboot device.
3. Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip (copy to sdcard)
4. Power off device
5. Enter Recovery Mode: power+volume up+
6. Choose zip from sdcard
7. If you have a lot of file then use Volume-Down to go to
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip & press the Power button
8. Use Volume-Down to go to Yes – Install Root_Superuser_3.1.3_Busybox_1.20.2-Update1-
signed.zip & press the Power button again
9. Install from sdcard complete. Go Back to the main menu
reboot system now
Enjoy
Special Thanks Bruno for CWM
Click to expand...
Click to collapse
---------- Post added at 10:58 AM ---------- Previous post was at 10:44 AM ----------
Hi guys, do you have CWM ROM for this Star N9330?
First you say it works good, and than you asked for CWM Rom?!?
So please choose, does CWM Rom work or not?
Star N9330
hi guys....is there something missing from the attached files or I do it wrongly? can't flash it using SPtools neither install it from SD card...any step by step guide on how to counter this matter? thanks in advance
1. turn off Phone and put out battery (usb cable is NOT plugged in)
2. start Flash SP_Flash_Tool_v3.1224.01 (flash_tool.exe) and choose "scatter loading"
3. choose from the folder "CWM_Bruno_N9330" the file called "MT6577_Android_scatter_emmc.txt"
4. there must be only one checkbox marked (recovery) - if not mark it and check if the phad is correct. ( you have to choose the file called "recovery.img" from the folder "CWM_Bruno_N9330"
5. now put battery back in phone again, click on button "download" accept the warning with "Yes" and THAN connect phone with usb to pc!
6. if all goes right, you should see a green circle with the message "download ok"
7. unconnect USB, put out battery for some seconds and put it back again
8. now you should enter the recovery mode by holding power-button and volume up-button at the same time
any questions?
N9330
Mawe79 said:
1. turn off Phone and put out battery (usb cable is NOT plugged in)
2. start Flash SP_Flash_Tool_v3.1224.01 (flash_tool.exe) and choose "scatter loading"
3. choose from the folder "CWM_Bruno_N9330" the file called "MT6577_Android_scatter_emmc.txt"
4. there must be only one checkbox marked (recovery) - if not mark it and check if the phad is correct. ( you have to choose the file called "recovery.img" from the folder "CWM_Bruno_N9330"
5. now put battery back in phone again, click on button "download" accept the warning with "Yes" and THAN connect phone with usb to pc!
6. if all goes right, you should see a green circle with the message "download ok"
7. unconnect USB, put out battery for some seconds and put it back again
8. now you should enter the recovery mode by holding power-button and volume up-button at the same time
any questions?
Click to expand...
Click to collapse
TQ Mawe79...stuck at step3...when I load the "MT6577_Android_scatter_emmc.txt"...a notification pop up says "Error: Initializing scatter file failed. Please check the name of scatter file which you load is legal." any idea bro?
did you checked the path correct? Did you checked?
If you choose the rght file and the path is correct, maybe the file you have downloaded is corrupt?
So i would suggest...download again, and try again!
The CWM is Only CWM Recovery
Ya, The CWM Recovery is really work. But the CWM ROM is only CWM Recovery.
I need real ROM as like "CWM 10 Jelly Bean" for this Star N9330. Or may be CWM 9.
Mawe79 said:
First you say it works good, and than you asked for CWM Rom?!?
So please choose, does CWM Rom work or not?
Click to expand...
Click to collapse
Try Again
Mawe79 said:
did you checked the path correct? Did you checked?
If you choose the rght file and the path is correct, maybe the file you have downloaded is corrupt?
So i would suggest...download again, and try again!
Click to expand...
Click to collapse
the path correct... I'll try to download the file again...TQ
Rooted
edrose363 said:
the path correct... I'll try to download the file again...TQ
Click to expand...
Click to collapse
at last...proud to announce...I am ROOTED...:laugh: thanks everybody in da house...now its time to swap the internal & external memory :silly:
Huawei Honor 2 U9508
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this is the easiest and the safest way to upgrade your phone (new ROM Android), install GAPPS and Root.
I have done this with (B544) and (B550) U9508_EmotionUI_1.5_V100R001CHNC00B550 Android 4.1.2, so you also can do this with B628 and B629 and others:
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=47
Here is B107 Stable (Android 4.0.4):
http://download-c.huawei.com/download/downloadCenter?downloadId=13991&siteCode=worldwide
MEGA: https://mega.nz/#!29glQa4R!dXLed1nlDMDYZxqSQPYXqf9HVatqHxzkW4dcPIMbUxE
Here is B509 Stable (Android 4.1.2 with EmotionUI 1.5) with Google Play Store and Multi language:
www.huaweidevices.de/getAttachment.php?file=U9508_V100R001C00B509.zip&force=true
MEGA: https://mega.nz/#!qkYGCJqI!vmD7eaGEMB7KBnf8_HCka08tw5dfIKKz0uwHBhUCkeg
B509 is the same as B550, but then with Google Play Store and Multi language
Here is B703 Stable (Android 4.2.2 with EmotionUI 1.6) with Google Play Store and Multi language:
www.huaweidevices.de/getAttachment.php?file=HUAWEI_Ascend_G615_Emotion_UI_SD_Card_Update.zip&force=true
MEGA: https://mega.nz/#!T1YgSToC!65sIKjnUVxz9Fkt_LvPd5ssoBOd4gqjCSe3dcvLCTtU
Here is B704 Stable (Android 4.2.2 with EmotionUI 1.6):
MEGA: https://mega.nz/#!jxAGAZjL!sgx5mPPsON1lvLEZx_QqzkBMac6PzfIXP2RsXpGRxVU
Here is B706 Beta (Android 4.2.2 with EmotionUI 1.6), it has the Bluetooth fix and Volume fix:
www.emui.com/nsp/geturl.php?path=U9508_EmotionUI_1.6_V100R001CHNC00B706.zip&rid=252
MEGA: https://mega.nz/#!P4Q2TIBI!ig5UAixOHTBE07oT2IDrKeO2t7MQyrcrXF_jpAyK1-4
Here is B709 Stable (Android 4.2.2 with EmotionUI 1.6)it has the Bluetooth fix with bluetooth auto connect without awaking the device and Volume fix:
www.emui.com/nsp/geturl.php?path=U9508_EmotionUI_1.6_V100R001CHNC00B709.zip&rid=384
MEGA: https://mega.nz/#!3hIzFBST!lj9xw5zw0C24R3KJwvTRXYYQ70xQgjQur8qOzAN-kDM
Here is B804 Stable (Android 4.2.2 with EmotionUI 2.0):
www.emui.com/nsp/geturl.php?path=U9508_EMUI_2.0_V100R001CHNC00B804.zip&rid=513
MEGA: https://mega.nz/#!TsoXGYba!bLemytfZedBa7lgaqP6EUlN37A-Va4V-xrL3jjKmMjU
First update to B709 and then do a Factory data reset and a Erase internal storage (do not forget to make a copy of the backup (HuaweiBackup) on your computer or SD Card) and
then flash it to B804.
Ow and before you install a new Firmware on your phone, you first use the App Back-up to backup all your Apps (including Google Play Store and Google Play-services)
and contacts and SMS and more, then you installed the new Firmware.
Then you used Back-up again and installed all your Apps back on your phone including Google Play Store and Google Play-services, and now Google Play works and
you do NOT have to install Chinese recovery, so if you had a old Firmware on your phone before you installed the New Firmware, you do not need Chinese
recovery, just use the App Back-up that came with the Firmware.
You don't need Chinese recovery to root your phone.
Ow and you need to press 7 times on the build number to see developers settings, in B7*** and above.
And put a copy of your backup on a Computer, and on your SD-Card if the App have not done that already.
You have to sign into gapps before the backup app will allow the option to backup google services.
Here is recovery6.0.1.9_AscendHonor2.exe:
https://mega.nz/#!fhZRzYDa!UbsyaMmDtUrbUa0tozjdQVsLM6u36q1VnUfNGO-Frys
Here is Motochopper:
http://www.mediafire.com/?f4lipgd1hh3jug2
Here is AnzhiRoot_U9508:
https://mega.nz/#!fpJSwDAa!v0UpoAmYK58_z-JCqDWY-JWV0FBFGmzBp7HXi_0frJY
Here is Genotools:
https://mega.co.nz/#!d0cknTIC!3j0dMKVNSy2TOmQBO7ToAlvkfZNdGCKeI6-tyLM6KQ0
Here is Root Genius:
https://mega.nz/#!G1Z1gQjI!PrLVCBW0yyd7N4EMw96F2v-SGvrlpj6jcWO2mVHeE7I
GAPPS
http://goo.im/gapps/gapps-jb-20121011-signed.zip Android 4.1.2.
https://mega.co.nz/#!0lUkgYqL!LtoCVV5nbbb7WOxbi4J3HAFWnGUlz2KxjslfoeVFRkw Android 4.2.2.
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
This is how you Replace Chinese Recovery with original recovery
1. Go to Settings and go to Developer options, and enable USB debugging.
2. Plug the phone in the computer, and Choose USB storage device (or Media device (MTP).
3. Restart phone and boot phone with Power & - volume
4. Open Recovery6.0.1.9_AscendHonor2.exe.
5. Now press 2 for The original recovery (1 is Chinese recovery), and press Enter.
6. If all is OK, the program will do its job and Reboot into FASTBOOT MOD, then he Flash the selected recovery and then he reboot the device 2 times.
7. Now your selected recovery have been installed.
Before starting the firmware you need to have:
If you unlocked the boatloader you cannot use official updates (Firmwares) from Huawei.
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Plug the phone in the computer.
2. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
3. Unplug the phone from the computer.
4. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone -
System update - (Local update) Update via SD Card).
5.The phone will reboot and begin the upgrade process and you will see the following picture (be patient it can take a few minutes).
If you see a lot of Chinese letters after you boot, it means that you have installed Chinese recovery with recovery6.0.1.9_AscendHonor2.exe,
and you have to replace Chinese Recovery like you see above.
First backup all your Apps and your Massages and Browser history and Call logs and more with Back-up,
thats a App that came with your phone.
After the update the phone will reboot and start (also be patient).
Google Play Store
1. Connect phone to computer, (first install the Huawei USB Drivers) then put
GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe
and press 1 and enter.
Then if he ask something about 1 and 2 option, and nothing happens do this:
Press CTRL+C then N. And it should start.
Make sure fastboot is OFF and USB debugging is ON
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
6. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
There are 4 ways you can Root this phone, first one is with Motochopper, and the second one is with AnzhiRoot_U9508, and the third is with Genotools,
and the fourth is with Chinese Recovery 6.0.1.9, do not forget to install the Huawei USB Drivers, and also HiSuite is useful to have.
It's easer with Motochopper and AnzhiRoot_U9508 and Genotools .
Motochopper
Instructions:
1. Download the file (Motochopper) to your PC.
2. Extract the entire contents of the zip file.
3. If you are using Windows, ensure you have installed the latest Huawei USB Drivers) available for your phone.
4. Connect phone to computer ensure USB Debugging mode is enabled on your device.
5. If you are using Windows, navigate to the extracted directory and execute “run.bat”. If you are using Linux or OS X, navigate to the extracted
directory in a terminal and execute “./run.sh”.
AnzhiRoot_U9508
1. connect dev to pc (usb debuging on)
2. run program
3. press one button "root"
Don't forget to restart your phone.
warnings: Dr.Web determines such program as virus (Tool.Rooter.18.origin)
Genotools
1. Connect your phone to your computer via a USB cable, select HiSuite.
2. Run GenoTool.
3. Go to tab 4.
4. Click "Root 1"
Root Genius
Works good with B804
1. Enable USB Debugging on your Android Sartphone.
2. Open Root Genius on your Windows Computer.
3. Once Roor Genius has started, connect your smartphone to the computer with USB Cable.
4. Once your smartphone is connected succsessfully to the Computer, Root genius will automatically detect your Smart phone.
5. Now click on the Root Now button to begin the rooting process.
6. Now Root Genius will Automatically Root your Smartphone and install KingUser App.
7. Now your smartphone is Rooted.
Chinese Recovery
Only works if you installed recovery6.0.1.9_AscendHonor2.exe, like you see above.
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will reboot your phone).
Pleas note that, you only get your phone rooted after this.
Removing Chinese apps
Only works if you have Rooted your Phone.
1. Download Root App Delete and start it.
2. Now select System Apps and then select ProMode
3. Now select the App and select Uninstall.
4. thats all now the App is uninstalled and is gone from your phone.
If Root App Delete don't work use Final Cleaner & Task Killer
I have done it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language
in a view clicks, and if you had English in settings then you also still will have that, also with ADW.Launcher or (i hear better) with
Apex Launcher you have your App Drawer and more back.
Why is my notification bar (panel) gone?
To have a working notification bar, there are a few conditions to be achieved by the rom:
-the file cust/channel/*countryname*/xml/hw_defaults.xml must contain two lines:
<integer toolBoxSwitch="1"/>
<string toolBoxDisplayWidgetNameArray="com.huawei.android. toolbox,com.huawei.android.toolbox.ToolBoxProvider "/>
-the file system/build.prop must contain the line: ro.config.hw_toolbox=true
-the updater-script must contain the correct symlink, like: symlink("/cust/channel/cn", "/data/cust");
When using an original update from a country different than the phone's country, there is no symlink made, so all the files in the cust partition are not
seen by the phone, which leads to no notification bar and other issues!
In a custom rom the symlink is forced in the updater-script, so if everything else is ok, everything works!
Also, if someone flash a rom of Batty86 for example, and clean data after flashing, the symlink leads to a deletion of the cust partition, so again we have
no notification bar and so on.
I hope it's a bit more clear now.
Change languages without morelocale2
To get more languages without morelocale2, you can look for /сust/channel/cn/xml/hw_defaults.xml on your phone (use Root Browser to select file).
Now go about 60% down till you are at Phone related, and then you will see:
<string white_languages="zh_CH,en_US"/>
And put between en_US and "/> your language you want, en_GB is British English language, fr_FR is French language, de_DE is German language, and so on and so on.
So if you want your Phone to be French you have to do this <string white_languages="zh_CH,en_US,fr_FR"/>
And also do that with:
<!--string white_languages="zh_CH,en_US"/-->
Wipe data/factory reset the phone once again, and you should have more languages at your disposal.
SO now you can choose your language, and never have to use morelocale2 anymore (until you reflash your Firmware of course).
You need root access for this.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop and soudy1994 and Pimorez and vkukfor and androidxda how to Root and Batty86 for why the notification bar (panel) is gone.
And the caller ID its works on Android 4.1.2 ?
AmigaWolf said:
So this is the easiest way to upgrade your phone (new ROM Android), install GAPPS and Root, it's the safest.
I have don this with (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2, so you also can do this with B605 and B610 and B615 others:
http://cn.ui.vmall.com/emotiondownload.php?type=%E8%8D%A3%E8%80%80%E5%9B%9B%E6%A0%B8
Here are GAPPS:
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
Before starting the firmware you need to have:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
Google Play Store
1. Connect phone to computer, (first install the Drivers) then put GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe and press 1 and enter.
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
5. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Pleas note that, you only get your phone rooted after this.
I have don it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language in a view clicks, and
if you had English in settings then you also still will have that, also with ASW Launcher you have your App Drawer and more back.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop for how to Root
Click to expand...
Click to collapse
And the caller ID its works on Android 4.1.2 ?
Here in my Cellphone didn't work, the cellphone was in my google account contatcs and show "Unknown Number" when someone calls me ...
I dont know what it is !
AmigaWolf said:
So this is the easiest way to upgrade your phone (new ROM Android), install GAPPS and Root, it's the safest.
I have don this with (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2, so you also can do this with B605 and B610 and B615 others:
http://cn.ui.vmall.com/emotiondownload.php?type=%E8%8D%A3%E8%80%80%E5%9B%9B%E6%A0%B8
Here are GAPPS:
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
Before starting the firmware you need to have:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
Google Play Store
1. Connect phone to computer, (first install the Drivers) then put GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe and press 1 and enter.
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
5. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Pleas note that, you only get your phone rooted after this.
I have don it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language in a view clicks, and
if you had English in settings then you also still will have that, also with ASW Launcher you have your App Drawer and more back.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop for how to Root
Click to expand...
Click to collapse
How can i get back my original bootloader ? in english ?
Because now i cant install original roms using dload folder and pressing + and - volume + power on start =(
how can i install my original rom again ?
Thanks
marcio carvalho moura said:
How can i get back my original bootloader ? in english ?
Because now i cant install original roms using dload folder and pressing + and - volume + power on start =(
how can i install my original rom again ?
Thanks
Click to expand...
Click to collapse
Sorry been sick almost the whole week, and i am still sick, but what do you mean How can i get back my original bootloader ? in english ?
What have happened, you have flash (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 like i have sad:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
I do not know what is wronge with your caller ID because i still have caller ID after flashing to B544, and i don't use google account contacts because i like my privacy.
thank for share
:good::good::good::good::good::good::good::good:
Need help
I keep getting the error: Couldn't sign in. Can't establish a reliable data connection to the server
help please
Eustis said:
I keep getting the error: Couldn't sign in. Can't establish a reliable data connection to the server
help please
Click to expand...
Click to collapse
What sign in, which server with program??????
You don't give me any useful info, and i am no programmer i only know a view things, like how to update
your OS (Android) and GAPPS and Rooting.
tuananh5292 said:
:good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for your Thanks, and good to hear that i could help you.
AmigaWolf said:
What sign in, which server with program??????
You don't give me any useful info, and i am no programmer i only know a view things, like how to update
your OS (Android) and GAPPS and Rooting.
Thank you for your Thanks, and good to hear that i could help you.
Click to expand...
Click to collapse
im sorry. I keep getting that error in google play store/every sign in needed google, for example youtube. I have tried many things to fix it, but none seem to work
i have emotion B537, rooted, and with gapps
Eustis said:
im sorry. I keep getting that error in google play store/every sign in needed google, for example youtube. I have tried many things to fix it, but none seem to work
i have emotion B537, rooted, and with gapps
Click to expand...
Click to collapse
Then it sounds more like you are typing your Password or User name wrong, had the same problem also once.
UPDATE: Have you ROOTED your phone, because GAPPS won't work without a rooted phone.
AmigaWolf said:
Then it sounds more like you are typing your Password or User name wrong, had the same problem also once.
UPDATE: Have you ROOTED your phone, because GAPPS won't work without a rooted phone.
Click to expand...
Click to collapse
yes its rooted.. and im sure its the right password... i have tried many accounts, even tried making a new one. still doesnt work
I have tried many things to fix it like these methods:
1- pull sim card
2- log into youtube, but it only comes to the same google login problem :S
3- factory reset
4- changing time
its really frustrating, i cant login to any google account, like youtube, playstore or gmail
Eustis said:
yes its rooted.. and im sure its the right password... i have tried many accounts, even tried making a new one. still doesnt work
I have tried many things to fix it like these methods:
1- pull sim card
2- log into youtube, but it only comes to the same google login problem :S
3- factory reset
4- changing time
its really frustrating, i cant login to any google account, like youtube, playstore or gmail
Click to expand...
Click to collapse
Then try to reinstall GAPPS, or try a different one, like a new one.
Or just put the newest Stable Emui on your phone like i have done B544, works perfect on my phone, so must also work on yours.
AmigaWolf said:
Then try to reinstall GAPPS, or try a different one, like a new one.
Or just put the newest Stable Emui on your phone like i have done B544, works perfect on my phone, so must also work on yours.
Click to expand...
Click to collapse
Could you show us some screenshots of the rom and how many Chinese things are on it.. thanks
PCTechRoss said:
Could you show us some screenshots of the rom and how many Chinese things are on it.. thanks
Click to expand...
Click to collapse
There are almost no Chinese things on it anymore, you can delete them almost all, and also disable them if you want.
Ok i will make some screen shots, and then put them here.
This is how MY B544 EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2 looks like.
So if you first install B544 it looks different, you can change everything you like, even how icons looks and so on.
AmigaWolf said:
So this is the easiest way to upgrade your phone (new ROM Android), install GAPPS and Root, it's the safest.
I have don this with (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2, so you also can do this with B605 and B610 and B615 others:
http://cn.ui.vmall.com/emotiondownload.php?type=%E8%8D%A3%E8%80%80%E5%9B%9B%E6%A0%B8
Here are GAPPS:
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
Before starting the firmware you need to have:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
Click to expand...
Click to collapse
There is some little problem with installing the B605.
After i copy the dload folder to the sd card, turn off, then (Vol + Vol - and Power) or (Settings - Storage - Software Update - SD card Upgrade)
it boots into Geno mod screen, with a lot of Chinese ****.
something like 7-8 options.
All this, instead of installing the new B605...
BTW, now i'm on MIUI.
How to solve this? If i do get it right, the recovery of mine is not the original, coz once i've installed it via recovery6.0.1.9_AscendHonor2.
But now, i dont know how to rollback to original recovery....
Chopinko said:
There is some little problem with installing the B605.
After i copy the dload folder to the sd card, turn off, then (Vol + Vol - and Power) or (Settings - Storage - Software Update - SD card Upgrade)
it boots into Geno mod screen, with a lot of Chinese ****.
something like 7-8 options.
All this, instead of installing the new B605...
BTW, now i'm on MIUI.
How to solve this? If i do get it right, the recovery of mine is not the original, coz once i've installed it via recovery6.0.1.9_AscendHonor2.
But now, i dont know how to rollback to original recovery....
Click to expand...
Click to collapse
You have to ask maikzen about that, i just let people know how to flash there phone with B544 and B605 and B610 and B615, i don't
know how to rollback to original recovery.
I already have recovery installed. How do i remove it so i can upgrade fimeware to b544??
EDIT: i used the custom recovery installer and pressed 2 (install original recovery) And now when i try to upgrade it says FAILED or something like that in big letters. I also tried factory reseting from recovery and it says FAIL again. Please help. I also have gapps and superuser installed.. how do i remove it or how do i do a COMPLETE reset, delet gapps and superuser? I earlier tried resetting from settings, and it worked but gapps and superuser was still there
Eustis said:
I already have recovery installed. How do i remove it so i can upgrade fimeware to b544??
EDIT: i used the custom recovery installer and pressed 2 (install original recovery) And now when i try to upgrade it says FAILED or something like that in big letters. I also tried factory reseting from recovery and it says FAIL again. Please help. I also have gapps and superuser installed.. how do i remove it or how do i do a COMPLETE reset, delet gapps and superuser? I earlier tried resetting from settings, and it worked but gapps and superuser was still there
Click to expand...
Click to collapse
You have to ask maikzen about that, i just let people know how to flash there phone with B544.
So sorry i don't know, i had no problems installing B544, i also installed recovery6.0.1.9_AscendHonor2.exe and had no problem installing B544.
Maybe THIS will help you, it's don on a Huawei Ascend C881 but maybe it will work on this phone.
flyme
Hello is it possible here to request flyme os port for hh2 ??? or where should i ask ???))
lexeyd said:
Hello is it possible here to request flyme os port for hh2 ??? or where should i ask ???))
Click to expand...
Click to collapse
Maybe you can ask that here: http://forum.xda-developers.com/showthread.php?t=2039998&page=144
How to go back to stock ROM ?? (HUAWEI_Honor2_firmware(U9508,Android_4.0,V100R001C00B107,Normal,05011HWL).zip)
Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade option NOT there...
Can't find anything usable..